1 |
Hi group, |
2 |
|
3 |
Still sorting out the glitches in the new 2.6.30-r7 kernel. |
4 |
|
5 |
eg the strange output of dmesg: |
6 |
|
7 |
... |
8 |
age: 1e 00 00 00 01 00 |
9 |
usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0 LUN 0 CL 6 |
10 |
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes |
11 |
usb-storage: Status code 0; transferred 31/31 |
12 |
usb-storage: -- transfer complete |
13 |
usb-storage: Bulk command transfer result=0 |
14 |
usb-storage: Attempting to get CSW... |
15 |
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes |
16 |
usb-storage: Status code 0; transferred 13/13 |
17 |
usb-storage: -- transfer complete |
18 |
usb-storage: Bulk status result = 0 |
19 |
usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x1 |
20 |
usb-storage: -- transport indicates command failure |
21 |
usb-storage: Issuing auto-REQUEST_SENSE |
22 |
usb-storage: Bulk Command S 0x43425355 T 0x9 L 18 F 128 Trg 0 LUN 0 CL 6 |
23 |
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes |
24 |
usb-storage: Status code 0; transferred 31/31 |
25 |
usb-storage: -- transfer complete |
26 |
usb-storage: Bulk command transfer result=0 |
27 |
usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries |
28 |
usb-storage: Status code 0; transferred 18/18 |
29 |
usb-storage: -- transfer complete |
30 |
usb-storage: Bulk data transfer result 0x0 |
31 |
usb-storage: Attempting to get CSW... |
32 |
... |
33 |
|
34 |
and so on, for 2739 lines. Nothing about other drives, file sytems, |
35 |
hardware, busses etc. When I plug in a usb key, for instance, dmesg |
36 |
doesn't even notice although the log console(F12) makes a note of the |
37 |
device. The earlier kernel acts "normally". |
38 |
|
39 |
Did I leave something out of the kernel? I can't think what. |
40 |
|
41 |
Maxim |