| 1 |
You should look at the BIOS config, if AHCI is enable. |
| 2 |
|
| 3 |
|
| 4 |
2012/11/25 Jacques Montier <jmontier@×××××.com> |
| 5 |
|
| 6 |
> Hi all, |
| 7 |
> |
| 8 |
> I bought a 250Go SSD M4 Crucial , read (of course) Gentoo documentation |
| 9 |
> and installed the drive on my desktop pc (Asus MB, Intel ie7 and 6Go RAM). |
| 10 |
> |
| 11 |
> 1- Everything seems to work perfectly, but i would like to know if my |
| 12 |
> configuration is ok or could be optimized. |
| 13 |
> |
| 14 |
> /tmp and /var/log are on tmpfs |
| 15 |
> /boot, / and /var are on SSD (sda), |
| 16 |
> swap, /home, /usr/portage, /var/tmp and /var/log on a 1To SATA HDD (sdb) |
| 17 |
> You can see my attached file fstab.txt |
| 18 |
> |
| 19 |
> 2- When booting, BIOS seems to detect the SSD as IDE not SATA ; anything |
| 20 |
> wrong ? |
| 21 |
> |
| 22 |
> Thank you very much for your response, |
| 23 |
> |
| 24 |
> Cheers, |
| 25 |
> |
| 26 |
> -- |
| 27 |
> Jacques |
| 28 |
> |
| 29 |
> |
| 30 |
> |
| 31 |
> |
| 32 |
> |
| 33 |
> |
Archives