1 |
Mick wrote: |
2 |
> On Thursday 20 December 2007, Dale wrote: |
3 |
> |
4 |
>> <snip> |
5 |
>> I get those a lot too. I have a question, can you post the output of |
6 |
>> hdparm -i /dev/hda . I have two Maxtor drives and both of mine gives a |
7 |
>> very similar error. My Western Digital doesn't have any errors at all. |
8 |
>> |
9 |
>> Thanks. |
10 |
>> |
11 |
>> Dale |
12 |
>> |
13 |
>> :-) :-) |
14 |
>> |
15 |
> |
16 |
> Here ya' go: |
17 |
> ==================================== |
18 |
> # hdparm -i /dev/hda |
19 |
> |
20 |
> /dev/hda: |
21 |
> |
22 |
> Model=IC25N020ATMR04-0, FwRev=MO1OAD5A, SerialNo=MRX107K1DS623H |
23 |
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } |
24 |
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 |
25 |
> BuffType=DualPortCache, BuffSize=1740kB, MaxMultSect=16, MultSect=16 |
26 |
> CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=39070080 |
27 |
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} |
28 |
> PIO modes: pio0 pio1 pio2 pio3 pio4 |
29 |
> DMA modes: mdma0 mdma1 mdma2 |
30 |
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 |
31 |
> AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled |
32 |
> Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a: ATA/ATAPI-2,3,4,5,6 |
33 |
> |
34 |
> * signifies the current active mode |
35 |
> ==================================== |
36 |
> |
37 |
|
38 |
|
39 |
So is it a Hitachi or IBM? I was curious since mine is a Maxtor and has |
40 |
similar errors. I had a thread a while back. Here is some of the info |
41 |
I was given to read. |
42 |
|
43 |
http://labs.google.com/papers/disk_failures.pdf |
44 |
|
45 |
http://scottstuff.net/blog/articles/2005/01/08/anatomy-of-a-drive-failure |
46 |
|
47 |
Maybe something will make sense. |
48 |
|
49 |
Dale |
50 |
|
51 |
:-) :-) |