1 |
I guess I should have checked before I sent that last post because |
2 |
now /dev/sda is there. Now, how do I make it be there when I first boot |
3 |
into Linux? |
4 |
|
5 |
On Sat, 2010-01-02 at 08:35 -0600, Michael Sullivan wrote: |
6 |
> On Fri, 2010-01-01 at 11:37 -0800, walt wrote: |
7 |
> > On 01/01/2010 05:48 AM, Michael Sullivan wrote: |
8 |
> > > Hello |
9 |
> > > |
10 |
> > > My wife's computer is pretty slow, so I've attached and old hard drive |
11 |
> > > into a hard drive enclosure and hooked it into her USB port for |
12 |
> > > additional swap space. It used to work. The swap space is supposed to |
13 |
> > > be /dev/sda1. The problem is that for some reason when I rebooted this |
14 |
> > > morning with a new kernel, /dev/sda does not exist anymore... |
15 |
> > |
16 |
> > Hm. So the only thing you changed was the new kernel? Might help to |
17 |
> > know why you built the new kernel. What problem were you solving by |
18 |
> > doing it? |
19 |
> > |
20 |
> OK here goes. I built the new kernel because with the old one /dev/sda |
21 |
> didn't seem to exist when I know it should. And besides, there was a |
22 |
> newer kernel marked as stable and aren't we always supposed to use the |
23 |
> newest stable kernel for security reasons, unless there's something that |
24 |
> we need done that the new kernel doesn't do? |
25 |
> |
26 |
> > I would try booting the machine without the USB swap disk and then |
27 |
> > hotplug it when the machine is already running. What does dmesg say |
28 |
> > then? Can be simpler to interpret when you know exactly which lines |
29 |
> > were printed in response to the newly connected drive. |
30 |
> |
31 |
> |
32 |
> I rebooted the machine with the drive unplugged and ran dmesg: |
33 |
> |
34 |
> catherine ~ # cat dmesg.txt |
35 |
> Initializing cgroup subsys cpuset |
36 |
> Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4 |
37 |
> (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009 |
38 |
> KERNEL supported cpus: |
39 |
> Intel GenuineIntel |
40 |
> AMD AuthenticAMD |
41 |
> NSC Geode by NSC |
42 |
> Cyrix CyrixInstead |
43 |
> Centaur CentaurHauls |
44 |
> Transmeta GenuineTMx86 |
45 |
> Transmeta TransmetaCPU |
46 |
> UMC UMC UMC UMC |
47 |
> BIOS-provided physical RAM map: |
48 |
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
49 |
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
50 |
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
51 |
> BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) |
52 |
> BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) |
53 |
> BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) |
54 |
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
55 |
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
56 |
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) |
57 |
> DMI 2.2 present. |
58 |
> Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. |
59 |
> e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> |
60 |
> (reserved) |
61 |
> last_pfn = 0xdff0 max_arch_pfn = 0x100000 |
62 |
> MTRR default type: uncachable |
63 |
> MTRR fixed ranges enabled: |
64 |
> 00000-9FFFF write-back |
65 |
> A0000-BFFFF uncachable |
66 |
> C0000-C7FFF write-protect |
67 |
> C8000-EFFFF uncachable |
68 |
> F0000-FFFFF write-protect |
69 |
> MTRR variable ranges enabled: |
70 |
> 0 base 000000000 mask FF0000000 write-back |
71 |
> 1 base 00E000000 mask FFE000000 uncachable |
72 |
> 2 base 0D0000000 mask FF8000000 write-combining |
73 |
> 3 disabled |
74 |
> 4 disabled |
75 |
> 5 disabled |
76 |
> 6 disabled |
77 |
> 7 disabled |
78 |
> initial memory mapped : 0 - 00800000 |
79 |
> init_memory_mapping: 0000000000000000-000000000dff0000 |
80 |
> 0000000000 - 0000400000 page 4k |
81 |
> 0000400000 - 000dc00000 page 2M |
82 |
> 000dc00000 - 000dff0000 page 4k |
83 |
> kernel direct mapping tables up to dff0000 @ 10000-15000 |
84 |
> RAMDISK: 0dcc5000 - 0dfdf8aa |
85 |
> ACPI: RSDP 000f7170 00014 (v00 AWARD ) |
86 |
> ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
87 |
> ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
88 |
> ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) |
89 |
> ACPI: FACS 0dff0000 00040 |
90 |
> ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
91 |
> ACPI: Local APIC address 0xfee00000 |
92 |
> 0MB HIGHMEM available. |
93 |
> 223MB LOWMEM available. |
94 |
> mapped low ram: 0 - 0dff0000 |
95 |
> low ram: 0 - 0dff0000 |
96 |
> node 0 low ram: 00000000 - 0dff0000 |
97 |
> node 0 bootmap 00011000 - 00012c00 |
98 |
> (9 early reservations) ==> bootmem [0000000000 - 000dff0000] |
99 |
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - |
100 |
> 0000001000] |
101 |
> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - |
102 |
> 0000002000] |
103 |
> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - |
104 |
> 0000007000] |
105 |
> #3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 - |
106 |
> 0000637f00] |
107 |
> #4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 - |
108 |
> 000dfdf8aa] |
109 |
> #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - |
110 |
> 0000100000] |
111 |
> #6 [0000638000 - 000063a06a] BRK ==> [0000638000 - |
112 |
> 000063a06a] |
113 |
> #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - |
114 |
> 0000011000] |
115 |
> #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - |
116 |
> 0000013000] |
117 |
> found SMP MP-table at [c00f57a0] f57a0 |
118 |
> Zone PFN ranges: |
119 |
> DMA 0x00000010 -> 0x00001000 |
120 |
> Normal 0x00001000 -> 0x0000dff0 |
121 |
> HighMem 0x0000dff0 -> 0x0000dff0 |
122 |
> Movable zone start PFN for each node |
123 |
> early_node_map[2] active PFN ranges |
124 |
> 0: 0x00000010 -> 0x0000009f |
125 |
> 0: 0x00000100 -> 0x0000dff0 |
126 |
> On node 0 totalpages: 57215 |
127 |
> free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200 |
128 |
> DMA zone: 32 pages used for memmap |
129 |
> DMA zone: 0 pages reserved |
130 |
> DMA zone: 3951 pages, LIFO batch:0 |
131 |
> Normal zone: 416 pages used for memmap |
132 |
> Normal zone: 52816 pages, LIFO batch:15 |
133 |
> Using APIC driver default |
134 |
> ACPI: PM-Timer IO Port: 0x1008 |
135 |
> ACPI: Local APIC address 0xfee00000 |
136 |
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
137 |
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
138 |
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
139 |
> IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 |
140 |
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
141 |
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) |
142 |
> ACPI: IRQ0 used by override. |
143 |
> ACPI: IRQ2 used by override. |
144 |
> ACPI: IRQ9 used by override. |
145 |
> Enabling APIC mode: Flat. Using 1 I/O APICs |
146 |
> Using ACPI (MADT) for SMP configuration information |
147 |
> SMP: Allowing 1 CPUs, 0 hotplug CPUs |
148 |
> nr_irqs_gsi: 24 |
149 |
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
150 |
> PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
151 |
> PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
152 |
> Allocating PCI resources starting at e000000 (gap: e000000:f0c00000) |
153 |
> NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 |
154 |
> PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes |
155 |
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: |
156 |
> 56767 |
157 |
> Kernel command line: real_root=/dev/hdc6 udev |
158 |
> PID hash table entries: 1024 (order: 10, 4096 bytes) |
159 |
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) |
160 |
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) |
161 |
> Enabling fast FPU save and restore... done. |
162 |
> Enabling unmasked SIMD FPU exception support... done. |
163 |
> Initializing CPU#0 |
164 |
> Initializing HighMem for node 0 (00000000:00000000) |
165 |
> Memory: 218040k/229312k available (3005k kernel code, 10620k reserved, |
166 |
> 1508k data, 428k init, 0k highmem) |
167 |
> virtual kernel memory layout: |
168 |
> fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) |
169 |
> pkmap : 0xff800000 - 0xffc00000 (4096 kB) |
170 |
> vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB) |
171 |
> lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) |
172 |
> .init : 0xc0569000 - 0xc05d4000 ( 428 kB) |
173 |
> .data : 0xc03ef6c0 - 0xc05688a8 (1508 kB) |
174 |
> .text : 0xc0100000 - 0xc03ef6c0 (3005 kB) |
175 |
> Checking if this processor honours the WP bit even in supervisor |
176 |
> mode...Ok. |
177 |
> Hierarchical RCU implementation. |
178 |
> NR_IRQS:512 |
179 |
> CPU 0 irqstacks, hard=c11c2000 soft=c11c3000 |
180 |
> Fast TSC calibration using PIT |
181 |
> Detected 1662.338 MHz processor. |
182 |
> Console: colour VGA+ 80x25 |
183 |
> console [tty0] enabled |
184 |
> Calibrating delay loop (skipped), value calculated using timer |
185 |
> frequency.. 3324.67 BogoMIPS (lpj=16623380) |
186 |
> Security Framework initialized |
187 |
> Mount-cache hash table entries: 512 |
188 |
> Initializing cgroup subsys ns |
189 |
> Initializing cgroup subsys cpuacct |
190 |
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
191 |
> CPU: L2 Cache: 256K (64 bytes/line) |
192 |
> mce: CPU supports 4 MCE banks |
193 |
> Performance Counters: AMD PMU driver. |
194 |
> ... version: 0 |
195 |
> ... bit width: 48 |
196 |
> ... generic counters: 4 |
197 |
> ... value mask: 0000ffffffffffff |
198 |
> ... max period: 00007fffffffffff |
199 |
> ... fixed-purpose counters: 0 |
200 |
> ... counter mask: 000000000000000f |
201 |
> Checking 'hlt' instruction... OK. |
202 |
> SMP alternatives: switching to UP code |
203 |
> Freeing SMP alternatives: 25k freed |
204 |
> ACPI: Core revision 20090521 |
205 |
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
206 |
> CPU0: AMD Sempron(tm) 2400+ stepping 01 |
207 |
> Brought up 1 CPUs |
208 |
> Total of 1 processors activated (3324.67 BogoMIPS). |
209 |
> CPU0 attaching NULL sched-domain. |
210 |
> Booting paravirtualized kernel on bare hardware |
211 |
> xor: automatically using best checksumming function: pIII_sse |
212 |
> pIII_sse : 4598.000 MB/sec |
213 |
> xor: using function: pIII_sse (4598.000 MB/sec) |
214 |
> NET: Registered protocol family 16 |
215 |
> ACPI: bus type pci registered |
216 |
> dca service started, version 1.8 |
217 |
> PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 |
218 |
> bio: create slab <bio-0> at 0 |
219 |
> ACPI: EC: Look up EC in DSDT |
220 |
> ACPI: Interpreter enabled |
221 |
> ACPI: (supports S0 S1 S4 S5) |
222 |
> ACPI: Using IOAPIC for interrupt routing |
223 |
> ACPI: No dock devices found. |
224 |
> ACPI: PCI Root Bridge [PCI0] (0000:00) |
225 |
> pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] |
226 |
> pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] |
227 |
> pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] |
228 |
> pci 0000:00:02.5: reg 18 io port: [0x170-0x177] |
229 |
> pci 0000:00:02.5: reg 1c io port: [0x374-0x377] |
230 |
> pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] |
231 |
> pci 0000:00:02.5: PME# supported from D3cold |
232 |
> pci 0000:00:02.5: PME# disabled |
233 |
> pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] |
234 |
> pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] |
235 |
> pci 0000:00:02.7: supports D1 D2 |
236 |
> pci 0000:00:02.7: PME# supported from D3hot D3cold |
237 |
> pci 0000:00:02.7: PME# disabled |
238 |
> pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff] |
239 |
> pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff] |
240 |
> pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff] |
241 |
> pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff] |
242 |
> pci 0000:00:03.3: PME# supported from D0 D3hot D3cold |
243 |
> pci 0000:00:03.3: PME# disabled |
244 |
> pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] |
245 |
> pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff] |
246 |
> pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] |
247 |
> pci 0000:00:04.0: supports D1 D2 |
248 |
> pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold |
249 |
> pci 0000:00:04.0: PME# disabled |
250 |
> pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] |
251 |
> pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff] |
252 |
> pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f] |
253 |
> pci 0000:01:00.0: supports D1 D2 |
254 |
> pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] |
255 |
> pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff] |
256 |
> pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] |
257 |
> pci_bus 0000:00: on NUMA node 0 |
258 |
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
259 |
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
260 |
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, |
261 |
> disabled. |
262 |
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) |
263 |
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
264 |
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
265 |
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
266 |
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) |
267 |
> ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) |
268 |
> SCSI subsystem initialized |
269 |
> libata version 3.00 loaded. |
270 |
> raid6: int32x1 433 MB/s |
271 |
> raid6: int32x2 652 MB/s |
272 |
> raid6: int32x4 573 MB/s |
273 |
> raid6: int32x8 458 MB/s |
274 |
> raid6: mmxx1 1356 MB/s |
275 |
> raid6: mmxx2 2433 MB/s |
276 |
> raid6: sse1x1 1276 MB/s |
277 |
> raid6: sse1x2 2020 MB/s |
278 |
> raid6: using algorithm sse1x2 (2020 MB/s) |
279 |
> PCI: Using ACPI for IRQ routing |
280 |
> pnp: PnP ACPI init |
281 |
> ACPI: bus type pnp registered |
282 |
> pnp: PnP ACPI: found 12 devices |
283 |
> ACPI: ACPI bus type pnp unregistered |
284 |
> system 00:00: iomem range 0xc8000-0xcbfff has been reserved |
285 |
> system 00:00: iomem range 0xf0000-0xf7fff could not be reserved |
286 |
> system 00:00: iomem range 0xf8000-0xfbfff could not be reserved |
287 |
> system 00:00: iomem range 0xfc000-0xfffff could not be reserved |
288 |
> system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved |
289 |
> system 00:00: iomem range 0xffff0000-0xffffffff has been reserved |
290 |
> system 00:00: iomem range 0x0-0x9ffff could not be reserved |
291 |
> system 00:00: iomem range 0x100000-0xdfeffff could not be reserved |
292 |
> system 00:00: iomem range 0xffee0000-0xffefffff has been reserved |
293 |
> system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved |
294 |
> system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved |
295 |
> system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved |
296 |
> system 00:02: ioport range 0x4d0-0x4d1 has been reserved |
297 |
> system 00:02: ioport range 0x800-0x805 has been reserved |
298 |
> system 00:02: ioport range 0x290-0x297 has been reserved |
299 |
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 |
300 |
> pci 0000:00:01.0: IO window: 0xd000-0xdfff |
301 |
> pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff |
302 |
> pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff |
303 |
> pci_bus 0000:00: resource 0 io: [0x00-0xffff] |
304 |
> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] |
305 |
> pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] |
306 |
> pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff] |
307 |
> pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] |
308 |
> NET: Registered protocol family 2 |
309 |
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes) |
310 |
> TCP established hash table entries: 8192 (order: 4, 65536 bytes) |
311 |
> TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
312 |
> TCP: Hash tables configured (established 8192 bind 8192) |
313 |
> TCP reno registered |
314 |
> NET: Registered protocol family 1 |
315 |
> Trying to unpack rootfs image as initramfs... |
316 |
> Freeing initrd memory: 3178k freed |
317 |
> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) |
318 |
> apm: overridden by ACPI. |
319 |
> audit: initializing netlink socket (disabled) |
320 |
> type=2000 audit(1262420890.810:1): initialized |
321 |
> HugeTLB registered 4 MB page size, pre-allocated 0 pages |
322 |
> VFS: Disk quotas dquot_6.5.2 |
323 |
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
324 |
> squashfs: version 4.0 (2009/01/31) Phillip Lougher |
325 |
> msgmni has been set to 432 |
326 |
> alg: No test for stdrng (krng) |
327 |
> async_tx: api initialized (async) |
328 |
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) |
329 |
> io scheduler noop registered |
330 |
> io scheduler anticipatory registered (default) |
331 |
> io scheduler deadline registered |
332 |
> io scheduler cfq registered |
333 |
> pci 0000:01:00.0: Boot video device |
334 |
> isapnp: Scanning for PnP cards... |
335 |
> Switched to high resolution mode on CPU 0 |
336 |
> isapnp: No Plug & Play device found |
337 |
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
338 |
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
339 |
> 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
340 |
> brd: module loaded |
341 |
> loop: module loaded |
342 |
> input: Macintosh mouse button emulation as /devices/virtual/input/input0 |
343 |
> Uniform Multi-Platform E-IDE driver |
344 |
> pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 |
345 |
> sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller |
346 |
> sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01) |
347 |
> sis5513 0000:00:02.5: not 100% native mode: will probe irqs later |
348 |
> ide0: BM-DMA at 0x4000-0x4007 |
349 |
> ide1: BM-DMA at 0x4008-0x400f |
350 |
> Probing IDE interface ide0... |
351 |
> hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive |
352 |
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 |
353 |
> hda: UDMA/33 mode selected |
354 |
> Probing IDE interface ide1... |
355 |
> hdc: WDC WD800BB-00JHC0, ATA DISK drive |
356 |
> hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 |
357 |
> hdc: host side 80-wire cable detection failed, limiting max speed to |
358 |
> UDMA33 |
359 |
> hdc: UDMA/33 mode selected |
360 |
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
361 |
> ide1 at 0x170-0x177,0x376 on irq 15 |
362 |
> ide_generic: please use "probe_mask=0x3f" module parameter for probing |
363 |
> all legacy ISA IDE ports |
364 |
> ide-gd driver 1.18 |
365 |
> hdc: max request size: 128KiB |
366 |
> hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 |
367 |
> hdc: cache flushes supported |
368 |
> hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 > |
369 |
> ide-cd driver 5.00 |
370 |
> ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache |
371 |
> Uniform CD-ROM driver Revision: 3.20 |
372 |
> Loading iSCSI transport class v2.0-870. |
373 |
> iscsi: registered transport (tcp) |
374 |
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
375 |
> serio: i8042 KBD port at 0x60,0x64 irq 1 |
376 |
> serio: i8042 AUX port at 0x60,0x64 irq 12 |
377 |
> mice: PS/2 mouse device common for all mice |
378 |
> md: raid0 personality registered for level 0 |
379 |
> md: raid1 personality registered for level 1 |
380 |
> md: raid6 personality registered for level 6 |
381 |
> md: raid5 personality registered for level 5 |
382 |
> md: raid4 personality registered for level 4 |
383 |
> cpuidle: using governor ladder |
384 |
> TCP cubic registered |
385 |
> NET: Registered protocol family 17 |
386 |
> Using IPI No-Shortcut mode |
387 |
> registered taskstats version 1 |
388 |
> Freeing unused kernel memory: 428k freed |
389 |
> input: AT Translated Set 2 keyboard |
390 |
> as /devices/platform/i8042/serio0/input/input1 |
391 |
> input: ImPS/2 Generic Wheel Mouse |
392 |
> as /devices/platform/i8042/serio1/input/input2 |
393 |
> NCR53c406a: no available ports found |
394 |
> scsi: <fdomain> Detection failed (no card) |
395 |
> GDT-HA: Storage RAID Controller Driver. Version: 3.05 |
396 |
> qlogicfas: no cards were found, please specify I/O address and IRQ using |
397 |
> iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! |
398 |
> NCR53c406a: no available ports found |
399 |
> imm: Version 2.05 (for Linux 2.4.0) |
400 |
> sym53c416.c: Version 1.0.0-ac |
401 |
> Fusion MPT base driver 3.04.10 |
402 |
> Copyright (c) 1999-2008 LSI Corporation |
403 |
> Fusion MPT SPI Host driver 3.04.10 |
404 |
> Fusion MPT FC Host driver 3.04.10 |
405 |
> Fusion MPT SAS Host driver 3.04.10 |
406 |
> 3ware Storage Controller device driver for Linux v1.26.02.002. |
407 |
> 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. |
408 |
> Compaq SMART2 Driver (v 2.6.0) |
409 |
> HP CISS Driver (v 3.6.20) |
410 |
> Adaptec aacraid driver 1.1-5[2461]-ms |
411 |
> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) |
412 |
> megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) |
413 |
> megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 |
414 |
> QLogic Fibre Channel HBA Driver: 8.03.01-k4 |
415 |
> Emulex LightPulse Fibre Channel SCSI driver 8.3.3 |
416 |
> Copyright(c) 2004-2009 Emulex. All rights reserved. |
417 |
> aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded |
418 |
> usbcore: registered new interface driver usbfs |
419 |
> usbcore: registered new interface driver hub |
420 |
> usbcore: registered new device driver usb |
421 |
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
422 |
> ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 |
423 |
> ehci_hcd 0000:00:03.3: EHCI Host Controller |
424 |
> ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 |
425 |
> ehci_hcd 0000:00:03.3: cache line size of 64 is not supported |
426 |
> ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000 |
427 |
> ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 |
428 |
> usb usb1: configuration #1 chosen from 1 choice |
429 |
> hub 1-0:1.0: USB hub found |
430 |
> hub 1-0:1.0: 8 ports detected |
431 |
> Initializing USB Mass Storage driver... |
432 |
> usbcore: registered new interface driver usb-storage |
433 |
> USB Mass Storage support registered. |
434 |
> uhci_hcd: USB Universal Host Controller Interface driver |
435 |
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
436 |
> ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 |
437 |
> ohci_hcd 0000:00:03.0: OHCI Host Controller |
438 |
> ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 |
439 |
> ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000 |
440 |
> usb usb2: configuration #1 chosen from 1 choice |
441 |
> hub 2-0:1.0: USB hub found |
442 |
> hub 2-0:1.0: 3 ports detected |
443 |
> ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 |
444 |
> ohci_hcd 0000:00:03.1: OHCI Host Controller |
445 |
> ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 |
446 |
> ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000 |
447 |
> usb usb3: configuration #1 chosen from 1 choice |
448 |
> hub 3-0:1.0: USB hub found |
449 |
> hub 3-0:1.0: 3 ports detected |
450 |
> ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 |
451 |
> ohci_hcd 0000:00:03.2: OHCI Host Controller |
452 |
> ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 |
453 |
> ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000 |
454 |
> usb usb4: configuration #1 chosen from 1 choice |
455 |
> hub 4-0:1.0: USB hub found |
456 |
> hub 4-0:1.0: 2 ports detected |
457 |
> usbcore: registered new interface driver hiddev |
458 |
> usbcore: registered new interface driver usbhid |
459 |
> usbhid: v2.6:USB HID core driver |
460 |
> sl811: driver sl811-hcd, 19 May 2005 |
461 |
> device-mapper: uevent: version 1.0.3 |
462 |
> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: |
463 |
> dm-devel@××××××.com |
464 |
> md: raid10 personality registered for level 10 |
465 |
> JFS: nTxBlock = 1733, nTxLock = 13867 |
466 |
> RPC: Registered udp transport module. |
467 |
> RPC: Registered tcp transport module. |
468 |
> SGI XFS with ACLs, security attributes, realtime, large block/inode |
469 |
> numbers, no debug enabled |
470 |
> SGI XFS Quota Management subsystem |
471 |
> fuse init (API version 7.12) |
472 |
> Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI |
473 |
> Copyright (c) 1999-2006 Intel Corporation. |
474 |
> kjournald starting. Commit interval 5 seconds |
475 |
> EXT3-fs: mounted filesystem with writeback data mode. |
476 |
> udev: starting version 146 |
477 |
> IT8705 SuperIO detected. |
478 |
> parport_pc 00:09: reported by Plug and Play ACPI |
479 |
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3 |
480 |
> [PCSPP,TRISTATE,COMPAT,ECP,DMA] |
481 |
> FDC 0 is a post-1991 82077 |
482 |
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
483 |
> ACPI: Power Button [PWRF] |
484 |
> input: Power Button |
485 |
> as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 |
486 |
> ACPI: Power Button [PWRB] |
487 |
> input: Sleep Button |
488 |
> as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 |
489 |
> ACPI: Sleep Button [FUTS] |
490 |
> Linux agpgart interface v0.103 |
491 |
> thermal LNXTHERM:01: registered as thermal_zone0 |
492 |
> ACPI: Thermal Zone [THRM] (40 C) |
493 |
> fan PNP0C0B:00: registered as cooling_device0 |
494 |
> ACPI: Fan [FAN] (on) |
495 |
> agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] |
496 |
> agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 |
497 |
> processor LNXCPU:00: registered as cooling_device1 |
498 |
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
499 |
> input: PC Speaker as /devices/platform/pcspkr/input/input6 |
500 |
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
501 |
> ppdev: user-space parallel port driver |
502 |
> Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 |
503 |
> sis900.c: v1.08.10 Apr. 2 2006 |
504 |
> rtc_cmos 00:04: RTC can wake from S4 |
505 |
> rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 |
506 |
> rtc0: alarms up to one year, 242 bytes nvram |
507 |
> intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples) |
508 |
> intel8x0: clocking to 48000 |
509 |
> sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 |
510 |
> 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. |
511 |
> 0000:00:04.0: Using transceiver found at address 1 as default |
512 |
> eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b |
513 |
> EXT3 FS on hdc6, internal journal |
514 |
> lp0: using parport0 (interrupt-driven). |
515 |
> Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k |
516 |
> eth0: Media Link On 100mbps full-duplex |
517 |
> warning: `named' uses 32-bit capabilities (legacy support in use) |
518 |
> NET: Registered protocol family 10 |
519 |
> lo: Disabled Privacy Extensions |
520 |
> ip_tables: (C) 2000-2006 Netfilter Core Team |
521 |
> nf_conntrack version 0.5.0 (3583 buckets, 14332 max) |
522 |
> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use |
523 |
> nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option |
524 |
> or |
525 |
> sysctl net.netfilter.nf_conntrack_acct=1 to enable it. |
526 |
> Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
527 |
> svc: failed to register lockdv1 RPC service (errno 97). |
528 |
> NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery |
529 |
> directory |
530 |
> NFSD: starting 90-second grace period |
531 |
> eth0: no IPv6 routers present |
532 |
> catherine ~ # |
533 |
> |
534 |
> and then plugged in: |
535 |
> |
536 |
> catherine ~ # cat dmesg-new.txt |
537 |
> Initializing cgroup subsys cpuset |
538 |
> Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4 |
539 |
> (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009 |
540 |
> KERNEL supported cpus: |
541 |
> Intel GenuineIntel |
542 |
> AMD AuthenticAMD |
543 |
> NSC Geode by NSC |
544 |
> Cyrix CyrixInstead |
545 |
> Centaur CentaurHauls |
546 |
> Transmeta GenuineTMx86 |
547 |
> Transmeta TransmetaCPU |
548 |
> UMC UMC UMC UMC |
549 |
> BIOS-provided physical RAM map: |
550 |
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
551 |
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
552 |
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
553 |
> BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) |
554 |
> BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) |
555 |
> BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) |
556 |
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
557 |
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
558 |
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) |
559 |
> DMI 2.2 present. |
560 |
> Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. |
561 |
> e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> |
562 |
> (reserved) |
563 |
> last_pfn = 0xdff0 max_arch_pfn = 0x100000 |
564 |
> MTRR default type: uncachable |
565 |
> MTRR fixed ranges enabled: |
566 |
> 00000-9FFFF write-back |
567 |
> A0000-BFFFF uncachable |
568 |
> C0000-C7FFF write-protect |
569 |
> C8000-EFFFF uncachable |
570 |
> F0000-FFFFF write-protect |
571 |
> MTRR variable ranges enabled: |
572 |
> 0 base 000000000 mask FF0000000 write-back |
573 |
> 1 base 00E000000 mask FFE000000 uncachable |
574 |
> 2 base 0D0000000 mask FF8000000 write-combining |
575 |
> 3 disabled |
576 |
> 4 disabled |
577 |
> 5 disabled |
578 |
> 6 disabled |
579 |
> 7 disabled |
580 |
> initial memory mapped : 0 - 00800000 |
581 |
> init_memory_mapping: 0000000000000000-000000000dff0000 |
582 |
> 0000000000 - 0000400000 page 4k |
583 |
> 0000400000 - 000dc00000 page 2M |
584 |
> 000dc00000 - 000dff0000 page 4k |
585 |
> kernel direct mapping tables up to dff0000 @ 10000-15000 |
586 |
> RAMDISK: 0dcc5000 - 0dfdf8aa |
587 |
> ACPI: RSDP 000f7170 00014 (v00 AWARD ) |
588 |
> ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
589 |
> ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
590 |
> ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) |
591 |
> ACPI: FACS 0dff0000 00040 |
592 |
> ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
593 |
> ACPI: Local APIC address 0xfee00000 |
594 |
> 0MB HIGHMEM available. |
595 |
> 223MB LOWMEM available. |
596 |
> mapped low ram: 0 - 0dff0000 |
597 |
> low ram: 0 - 0dff0000 |
598 |
> node 0 low ram: 00000000 - 0dff0000 |
599 |
> node 0 bootmap 00011000 - 00012c00 |
600 |
> (9 early reservations) ==> bootmem [0000000000 - 000dff0000] |
601 |
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - |
602 |
> 0000001000] |
603 |
> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - |
604 |
> 0000002000] |
605 |
> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - |
606 |
> 0000007000] |
607 |
> #3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 - |
608 |
> 0000637f00] |
609 |
> #4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 - |
610 |
> 000dfdf8aa] |
611 |
> #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - |
612 |
> 0000100000] |
613 |
> #6 [0000638000 - 000063a06a] BRK ==> [0000638000 - |
614 |
> 000063a06a] |
615 |
> #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - |
616 |
> 0000011000] |
617 |
> #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - |
618 |
> 0000013000] |
619 |
> found SMP MP-table at [c00f57a0] f57a0 |
620 |
> Zone PFN ranges: |
621 |
> DMA 0x00000010 -> 0x00001000 |
622 |
> Normal 0x00001000 -> 0x0000dff0 |
623 |
> HighMem 0x0000dff0 -> 0x0000dff0 |
624 |
> Movable zone start PFN for each node |
625 |
> early_node_map[2] active PFN ranges |
626 |
> 0: 0x00000010 -> 0x0000009f |
627 |
> 0: 0x00000100 -> 0x0000dff0 |
628 |
> On node 0 totalpages: 57215 |
629 |
> free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200 |
630 |
> DMA zone: 32 pages used for memmap |
631 |
> DMA zone: 0 pages reserved |
632 |
> DMA zone: 3951 pages, LIFO batch:0 |
633 |
> Normal zone: 416 pages used for memmap |
634 |
> Normal zone: 52816 pages, LIFO batch:15 |
635 |
> Using APIC driver default |
636 |
> ACPI: PM-Timer IO Port: 0x1008 |
637 |
> ACPI: Local APIC address 0xfee00000 |
638 |
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
639 |
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
640 |
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
641 |
> IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 |
642 |
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
643 |
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) |
644 |
> ACPI: IRQ0 used by override. |
645 |
> ACPI: IRQ2 used by override. |
646 |
> ACPI: IRQ9 used by override. |
647 |
> Enabling APIC mode: Flat. Using 1 I/O APICs |
648 |
> Using ACPI (MADT) for SMP configuration information |
649 |
> SMP: Allowing 1 CPUs, 0 hotplug CPUs |
650 |
> nr_irqs_gsi: 24 |
651 |
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
652 |
> PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
653 |
> PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
654 |
> Allocating PCI resources starting at e000000 (gap: e000000:f0c00000) |
655 |
> NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 |
656 |
> PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes |
657 |
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: |
658 |
> 56767 |
659 |
> Kernel command line: real_root=/dev/hdc6 udev |
660 |
> PID hash table entries: 1024 (order: 10, 4096 bytes) |
661 |
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) |
662 |
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) |
663 |
> Enabling fast FPU save and restore... done. |
664 |
> Enabling unmasked SIMD FPU exception support... done. |
665 |
> Initializing CPU#0 |
666 |
> Initializing HighMem for node 0 (00000000:00000000) |
667 |
> Memory: 218040k/229312k available (3005k kernel code, 10620k reserved, |
668 |
> 1508k data, 428k init, 0k highmem) |
669 |
> virtual kernel memory layout: |
670 |
> fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) |
671 |
> pkmap : 0xff800000 - 0xffc00000 (4096 kB) |
672 |
> vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB) |
673 |
> lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) |
674 |
> .init : 0xc0569000 - 0xc05d4000 ( 428 kB) |
675 |
> .data : 0xc03ef6c0 - 0xc05688a8 (1508 kB) |
676 |
> .text : 0xc0100000 - 0xc03ef6c0 (3005 kB) |
677 |
> Checking if this processor honours the WP bit even in supervisor |
678 |
> mode...Ok. |
679 |
> Hierarchical RCU implementation. |
680 |
> NR_IRQS:512 |
681 |
> CPU 0 irqstacks, hard=c11c2000 soft=c11c3000 |
682 |
> Fast TSC calibration using PIT |
683 |
> Detected 1662.338 MHz processor. |
684 |
> Console: colour VGA+ 80x25 |
685 |
> console [tty0] enabled |
686 |
> Calibrating delay loop (skipped), value calculated using timer |
687 |
> frequency.. 3324.67 BogoMIPS (lpj=16623380) |
688 |
> Security Framework initialized |
689 |
> Mount-cache hash table entries: 512 |
690 |
> Initializing cgroup subsys ns |
691 |
> Initializing cgroup subsys cpuacct |
692 |
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
693 |
> CPU: L2 Cache: 256K (64 bytes/line) |
694 |
> mce: CPU supports 4 MCE banks |
695 |
> Performance Counters: AMD PMU driver. |
696 |
> ... version: 0 |
697 |
> ... bit width: 48 |
698 |
> ... generic counters: 4 |
699 |
> ... value mask: 0000ffffffffffff |
700 |
> ... max period: 00007fffffffffff |
701 |
> ... fixed-purpose counters: 0 |
702 |
> ... counter mask: 000000000000000f |
703 |
> Checking 'hlt' instruction... OK. |
704 |
> SMP alternatives: switching to UP code |
705 |
> Freeing SMP alternatives: 25k freed |
706 |
> ACPI: Core revision 20090521 |
707 |
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
708 |
> CPU0: AMD Sempron(tm) 2400+ stepping 01 |
709 |
> Brought up 1 CPUs |
710 |
> Total of 1 processors activated (3324.67 BogoMIPS). |
711 |
> CPU0 attaching NULL sched-domain. |
712 |
> Booting paravirtualized kernel on bare hardware |
713 |
> xor: automatically using best checksumming function: pIII_sse |
714 |
> pIII_sse : 4598.000 MB/sec |
715 |
> xor: using function: pIII_sse (4598.000 MB/sec) |
716 |
> NET: Registered protocol family 16 |
717 |
> ACPI: bus type pci registered |
718 |
> dca service started, version 1.8 |
719 |
> PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 |
720 |
> bio: create slab <bio-0> at 0 |
721 |
> ACPI: EC: Look up EC in DSDT |
722 |
> ACPI: Interpreter enabled |
723 |
> ACPI: (supports S0 S1 S4 S5) |
724 |
> ACPI: Using IOAPIC for interrupt routing |
725 |
> ACPI: No dock devices found. |
726 |
> ACPI: PCI Root Bridge [PCI0] (0000:00) |
727 |
> pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] |
728 |
> pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] |
729 |
> pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] |
730 |
> pci 0000:00:02.5: reg 18 io port: [0x170-0x177] |
731 |
> pci 0000:00:02.5: reg 1c io port: [0x374-0x377] |
732 |
> pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] |
733 |
> pci 0000:00:02.5: PME# supported from D3cold |
734 |
> pci 0000:00:02.5: PME# disabled |
735 |
> pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] |
736 |
> pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] |
737 |
> pci 0000:00:02.7: supports D1 D2 |
738 |
> pci 0000:00:02.7: PME# supported from D3hot D3cold |
739 |
> pci 0000:00:02.7: PME# disabled |
740 |
> pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff] |
741 |
> pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff] |
742 |
> pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff] |
743 |
> pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff] |
744 |
> pci 0000:00:03.3: PME# supported from D0 D3hot D3cold |
745 |
> pci 0000:00:03.3: PME# disabled |
746 |
> pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] |
747 |
> pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff] |
748 |
> pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] |
749 |
> pci 0000:00:04.0: supports D1 D2 |
750 |
> pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold |
751 |
> pci 0000:00:04.0: PME# disabled |
752 |
> pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] |
753 |
> pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff] |
754 |
> pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f] |
755 |
> pci 0000:01:00.0: supports D1 D2 |
756 |
> pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] |
757 |
> pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff] |
758 |
> pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] |
759 |
> pci_bus 0000:00: on NUMA node 0 |
760 |
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
761 |
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
762 |
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, |
763 |
> disabled. |
764 |
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) |
765 |
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
766 |
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
767 |
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
768 |
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) |
769 |
> ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) |
770 |
> SCSI subsystem initialized |
771 |
> libata version 3.00 loaded. |
772 |
> raid6: int32x1 433 MB/s |
773 |
> raid6: int32x2 652 MB/s |
774 |
> raid6: int32x4 573 MB/s |
775 |
> raid6: int32x8 458 MB/s |
776 |
> raid6: mmxx1 1356 MB/s |
777 |
> raid6: mmxx2 2433 MB/s |
778 |
> raid6: sse1x1 1276 MB/s |
779 |
> raid6: sse1x2 2020 MB/s |
780 |
> raid6: using algorithm sse1x2 (2020 MB/s) |
781 |
> PCI: Using ACPI for IRQ routing |
782 |
> pnp: PnP ACPI init |
783 |
> ACPI: bus type pnp registered |
784 |
> pnp: PnP ACPI: found 12 devices |
785 |
> ACPI: ACPI bus type pnp unregistered |
786 |
> system 00:00: iomem range 0xc8000-0xcbfff has been reserved |
787 |
> system 00:00: iomem range 0xf0000-0xf7fff could not be reserved |
788 |
> system 00:00: iomem range 0xf8000-0xfbfff could not be reserved |
789 |
> system 00:00: iomem range 0xfc000-0xfffff could not be reserved |
790 |
> system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved |
791 |
> system 00:00: iomem range 0xffff0000-0xffffffff has been reserved |
792 |
> system 00:00: iomem range 0x0-0x9ffff could not be reserved |
793 |
> system 00:00: iomem range 0x100000-0xdfeffff could not be reserved |
794 |
> system 00:00: iomem range 0xffee0000-0xffefffff has been reserved |
795 |
> system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved |
796 |
> system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved |
797 |
> system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved |
798 |
> system 00:02: ioport range 0x4d0-0x4d1 has been reserved |
799 |
> system 00:02: ioport range 0x800-0x805 has been reserved |
800 |
> system 00:02: ioport range 0x290-0x297 has been reserved |
801 |
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 |
802 |
> pci 0000:00:01.0: IO window: 0xd000-0xdfff |
803 |
> pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff |
804 |
> pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff |
805 |
> pci_bus 0000:00: resource 0 io: [0x00-0xffff] |
806 |
> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] |
807 |
> pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] |
808 |
> pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff] |
809 |
> pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] |
810 |
> NET: Registered protocol family 2 |
811 |
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes) |
812 |
> TCP established hash table entries: 8192 (order: 4, 65536 bytes) |
813 |
> TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
814 |
> TCP: Hash tables configured (established 8192 bind 8192) |
815 |
> TCP reno registered |
816 |
> NET: Registered protocol family 1 |
817 |
> Trying to unpack rootfs image as initramfs... |
818 |
> Freeing initrd memory: 3178k freed |
819 |
> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) |
820 |
> apm: overridden by ACPI. |
821 |
> audit: initializing netlink socket (disabled) |
822 |
> type=2000 audit(1262420890.810:1): initialized |
823 |
> HugeTLB registered 4 MB page size, pre-allocated 0 pages |
824 |
> VFS: Disk quotas dquot_6.5.2 |
825 |
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
826 |
> squashfs: version 4.0 (2009/01/31) Phillip Lougher |
827 |
> msgmni has been set to 432 |
828 |
> alg: No test for stdrng (krng) |
829 |
> async_tx: api initialized (async) |
830 |
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) |
831 |
> io scheduler noop registered |
832 |
> io scheduler anticipatory registered (default) |
833 |
> io scheduler deadline registered |
834 |
> io scheduler cfq registered |
835 |
> pci 0000:01:00.0: Boot video device |
836 |
> isapnp: Scanning for PnP cards... |
837 |
> Switched to high resolution mode on CPU 0 |
838 |
> isapnp: No Plug & Play device found |
839 |
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
840 |
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
841 |
> 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
842 |
> brd: module loaded |
843 |
> loop: module loaded |
844 |
> input: Macintosh mouse button emulation as /devices/virtual/input/input0 |
845 |
> Uniform Multi-Platform E-IDE driver |
846 |
> pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 |
847 |
> sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller |
848 |
> sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01) |
849 |
> sis5513 0000:00:02.5: not 100% native mode: will probe irqs later |
850 |
> ide0: BM-DMA at 0x4000-0x4007 |
851 |
> ide1: BM-DMA at 0x4008-0x400f |
852 |
> Probing IDE interface ide0... |
853 |
> hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive |
854 |
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 |
855 |
> hda: UDMA/33 mode selected |
856 |
> Probing IDE interface ide1... |
857 |
> hdc: WDC WD800BB-00JHC0, ATA DISK drive |
858 |
> hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 |
859 |
> hdc: host side 80-wire cable detection failed, limiting max speed to |
860 |
> UDMA33 |
861 |
> hdc: UDMA/33 mode selected |
862 |
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
863 |
> ide1 at 0x170-0x177,0x376 on irq 15 |
864 |
> ide_generic: please use "probe_mask=0x3f" module parameter for probing |
865 |
> all legacy ISA IDE ports |
866 |
> ide-gd driver 1.18 |
867 |
> hdc: max request size: 128KiB |
868 |
> hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 |
869 |
> hdc: cache flushes supported |
870 |
> hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 > |
871 |
> ide-cd driver 5.00 |
872 |
> ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache |
873 |
> Uniform CD-ROM driver Revision: 3.20 |
874 |
> Loading iSCSI transport class v2.0-870. |
875 |
> iscsi: registered transport (tcp) |
876 |
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
877 |
> serio: i8042 KBD port at 0x60,0x64 irq 1 |
878 |
> serio: i8042 AUX port at 0x60,0x64 irq 12 |
879 |
> mice: PS/2 mouse device common for all mice |
880 |
> md: raid0 personality registered for level 0 |
881 |
> md: raid1 personality registered for level 1 |
882 |
> md: raid6 personality registered for level 6 |
883 |
> md: raid5 personality registered for level 5 |
884 |
> md: raid4 personality registered for level 4 |
885 |
> cpuidle: using governor ladder |
886 |
> TCP cubic registered |
887 |
> NET: Registered protocol family 17 |
888 |
> Using IPI No-Shortcut mode |
889 |
> registered taskstats version 1 |
890 |
> Freeing unused kernel memory: 428k freed |
891 |
> input: AT Translated Set 2 keyboard |
892 |
> as /devices/platform/i8042/serio0/input/input1 |
893 |
> input: ImPS/2 Generic Wheel Mouse |
894 |
> as /devices/platform/i8042/serio1/input/input2 |
895 |
> NCR53c406a: no available ports found |
896 |
> scsi: <fdomain> Detection failed (no card) |
897 |
> GDT-HA: Storage RAID Controller Driver. Version: 3.05 |
898 |
> qlogicfas: no cards were found, please specify I/O address and IRQ using |
899 |
> iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! |
900 |
> NCR53c406a: no available ports found |
901 |
> imm: Version 2.05 (for Linux 2.4.0) |
902 |
> sym53c416.c: Version 1.0.0-ac |
903 |
> Fusion MPT base driver 3.04.10 |
904 |
> Copyright (c) 1999-2008 LSI Corporation |
905 |
> Fusion MPT SPI Host driver 3.04.10 |
906 |
> Fusion MPT FC Host driver 3.04.10 |
907 |
> Fusion MPT SAS Host driver 3.04.10 |
908 |
> 3ware Storage Controller device driver for Linux v1.26.02.002. |
909 |
> 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. |
910 |
> Compaq SMART2 Driver (v 2.6.0) |
911 |
> HP CISS Driver (v 3.6.20) |
912 |
> Adaptec aacraid driver 1.1-5[2461]-ms |
913 |
> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) |
914 |
> megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) |
915 |
> megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 |
916 |
> QLogic Fibre Channel HBA Driver: 8.03.01-k4 |
917 |
> Emulex LightPulse Fibre Channel SCSI driver 8.3.3 |
918 |
> Copyright(c) 2004-2009 Emulex. All rights reserved. |
919 |
> aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded |
920 |
> usbcore: registered new interface driver usbfs |
921 |
> usbcore: registered new interface driver hub |
922 |
> usbcore: registered new device driver usb |
923 |
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
924 |
> ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 |
925 |
> ehci_hcd 0000:00:03.3: EHCI Host Controller |
926 |
> ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 |
927 |
> ehci_hcd 0000:00:03.3: cache line size of 64 is not supported |
928 |
> ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000 |
929 |
> ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 |
930 |
> usb usb1: configuration #1 chosen from 1 choice |
931 |
> hub 1-0:1.0: USB hub found |
932 |
> hub 1-0:1.0: 8 ports detected |
933 |
> Initializing USB Mass Storage driver... |
934 |
> usbcore: registered new interface driver usb-storage |
935 |
> USB Mass Storage support registered. |
936 |
> uhci_hcd: USB Universal Host Controller Interface driver |
937 |
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
938 |
> ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 |
939 |
> ohci_hcd 0000:00:03.0: OHCI Host Controller |
940 |
> ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 |
941 |
> ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000 |
942 |
> usb usb2: configuration #1 chosen from 1 choice |
943 |
> hub 2-0:1.0: USB hub found |
944 |
> hub 2-0:1.0: 3 ports detected |
945 |
> ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 |
946 |
> ohci_hcd 0000:00:03.1: OHCI Host Controller |
947 |
> ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 |
948 |
> ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000 |
949 |
> usb usb3: configuration #1 chosen from 1 choice |
950 |
> hub 3-0:1.0: USB hub found |
951 |
> hub 3-0:1.0: 3 ports detected |
952 |
> ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 |
953 |
> ohci_hcd 0000:00:03.2: OHCI Host Controller |
954 |
> ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 |
955 |
> ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000 |
956 |
> usb usb4: configuration #1 chosen from 1 choice |
957 |
> hub 4-0:1.0: USB hub found |
958 |
> hub 4-0:1.0: 2 ports detected |
959 |
> usbcore: registered new interface driver hiddev |
960 |
> usbcore: registered new interface driver usbhid |
961 |
> usbhid: v2.6:USB HID core driver |
962 |
> sl811: driver sl811-hcd, 19 May 2005 |
963 |
> device-mapper: uevent: version 1.0.3 |
964 |
> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: |
965 |
> dm-devel@××××××.com |
966 |
> md: raid10 personality registered for level 10 |
967 |
> JFS: nTxBlock = 1733, nTxLock = 13867 |
968 |
> RPC: Registered udp transport module. |
969 |
> RPC: Registered tcp transport module. |
970 |
> SGI XFS with ACLs, security attributes, realtime, large block/inode |
971 |
> numbers, no debug enabled |
972 |
> SGI XFS Quota Management subsystem |
973 |
> fuse init (API version 7.12) |
974 |
> Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI |
975 |
> Copyright (c) 1999-2006 Intel Corporation. |
976 |
> kjournald starting. Commit interval 5 seconds |
977 |
> EXT3-fs: mounted filesystem with writeback data mode. |
978 |
> udev: starting version 146 |
979 |
> IT8705 SuperIO detected. |
980 |
> parport_pc 00:09: reported by Plug and Play ACPI |
981 |
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3 |
982 |
> [PCSPP,TRISTATE,COMPAT,ECP,DMA] |
983 |
> FDC 0 is a post-1991 82077 |
984 |
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
985 |
> ACPI: Power Button [PWRF] |
986 |
> input: Power Button |
987 |
> as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 |
988 |
> ACPI: Power Button [PWRB] |
989 |
> input: Sleep Button |
990 |
> as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 |
991 |
> ACPI: Sleep Button [FUTS] |
992 |
> Linux agpgart interface v0.103 |
993 |
> thermal LNXTHERM:01: registered as thermal_zone0 |
994 |
> ACPI: Thermal Zone [THRM] (40 C) |
995 |
> fan PNP0C0B:00: registered as cooling_device0 |
996 |
> ACPI: Fan [FAN] (on) |
997 |
> agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] |
998 |
> agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 |
999 |
> processor LNXCPU:00: registered as cooling_device1 |
1000 |
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
1001 |
> input: PC Speaker as /devices/platform/pcspkr/input/input6 |
1002 |
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
1003 |
> ppdev: user-space parallel port driver |
1004 |
> Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 |
1005 |
> sis900.c: v1.08.10 Apr. 2 2006 |
1006 |
> rtc_cmos 00:04: RTC can wake from S4 |
1007 |
> rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 |
1008 |
> rtc0: alarms up to one year, 242 bytes nvram |
1009 |
> intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples) |
1010 |
> intel8x0: clocking to 48000 |
1011 |
> sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 |
1012 |
> 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. |
1013 |
> 0000:00:04.0: Using transceiver found at address 1 as default |
1014 |
> eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b |
1015 |
> EXT3 FS on hdc6, internal journal |
1016 |
> lp0: using parport0 (interrupt-driven). |
1017 |
> Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k |
1018 |
> eth0: Media Link On 100mbps full-duplex |
1019 |
> warning: `named' uses 32-bit capabilities (legacy support in use) |
1020 |
> NET: Registered protocol family 10 |
1021 |
> lo: Disabled Privacy Extensions |
1022 |
> ip_tables: (C) 2000-2006 Netfilter Core Team |
1023 |
> nf_conntrack version 0.5.0 (3583 buckets, 14332 max) |
1024 |
> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use |
1025 |
> nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option |
1026 |
> or |
1027 |
> sysctl net.netfilter.nf_conntrack_acct=1 to enable it. |
1028 |
> Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
1029 |
> svc: failed to register lockdv1 RPC service (errno 97). |
1030 |
> NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery |
1031 |
> directory |
1032 |
> NFSD: starting 90-second grace period |
1033 |
> eth0: no IPv6 routers present |
1034 |
> usb 1-6: new high speed USB device using ehci_hcd and address 2 |
1035 |
> usb 1-6: configuration #1 chosen from 1 choice |
1036 |
> scsi2 : SCSI emulation for USB Mass Storage devices |
1037 |
> usb-storage: device found at 2 |
1038 |
> usb-storage: waiting for device to settle before scanning |
1039 |
> IPKF INPUT Catch-all: IN=eth0 OUT= |
1040 |
> MAC=ff:ff:ff:ff:ff:ff:00:1f:3a:15:c1:0d:08:00 SRC=192.168.1.104 |
1041 |
> DST=192.168.1.255 LEN=242 TOS=0x00 PREC=0x00 TTL=128 ID=25546 PROTO=UDP |
1042 |
> SPT=138 DPT=138 LEN=222 |
1043 |
> usb-storage: device scan complete |
1044 |
> scsi 2:0:0:0: Direct-Access WDC WD80 0JB-00JJC0 0811 PQ: 0 |
1045 |
> ANSI: 0 |
1046 |
> sd 2:0:0:0: Attached scsi generic sg0 type 0 |
1047 |
> sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) |
1048 |
> sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled |
1049 |
> sd 2:0:0:0: [sda] Assuming drive cache: write through |
1050 |
> sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled |
1051 |
> sd 2:0:0:0: [sda] Assuming drive cache: write through |
1052 |
> sda: sda1 |
1053 |
> sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled |
1054 |
> sd 2:0:0:0: [sda] Assuming drive cache: write through |
1055 |
> sd 2:0:0:0: [sda] Attached SCSI disk |
1056 |
> IPKF INPUT Catch-all: IN=eth0 OUT= |
1057 |
> MAC=ff:ff:ff:ff:ff:ff:00:24:1e:5b:3b:c7:08:00 SRC=0.0.0.0 |
1058 |
> DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=12332 PROTO=UDP |
1059 |
> SPT=68 DPT=67 LEN=308 |
1060 |
> IPKF INPUT Catch-all: IN=eth0 OUT= |
1061 |
> MAC=01:00:5e:00:00:01:00:23:69:85:2f:40:08:00 SRC=192.168.1.1 |
1062 |
> DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 |
1063 |
> catherine ~ # |
1064 |
> |
1065 |
> |
1066 |
> All I know is that at one time, the external drive was recognized |
1067 |
> on /dev/sda and at that time I formatted the drive for swap space and |
1068 |
> ran swapon /dev/sda1 Now for some reason it doesn't work. I want it to |
1069 |
> work. |