| 1 |
for all i know, my data disk died yesterday (WD caviar black, 2TB). |
| 2 |
first i see the message: |
| 3 |
|
| 4 |
SATA PORT3 Device Error |
| 5 |
Press F1 to resume |
| 6 |
|
| 7 |
and then during boot up this: |
| 8 |
|
| 9 |
[ 2.775026] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 10 |
[ 2.775571] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, |
| 11 |
err_mask=0x80) |
| 12 |
[ 8.233178] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 13 |
[ 8.233717] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, |
| 14 |
err_mask=0x80) |
| 15 |
[ 8.234080] ata3: limiting SATA link speed to 1.5 Gbps |
| 16 |
[ 13.691330] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) |
| 17 |
[ 13.691866] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) |
| 18 |
[ 19.149483] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) |
| 19 |
|
| 20 |
yes, i changed sata connections, with the same results (changing the |
| 21 |
sata number, of course) |
| 22 |
|
| 23 |
i don know anything about this, but my hunch is that it's a burnt PCB. |
| 24 |
i've fond several repair services on the web, but i would greatly |
| 25 |
appreciate recommendations based on personal experience. |
| 26 |
|
| 27 |
thanks, |
| 28 |
|
| 29 |
lj |
Archives