| 1 |
Hi, |
| 2 |
|
| 3 |
I want to record DVB-T broadcast with my (already working) DVB-T card. |
| 4 |
Since there are only a couple of broadcasts which should be recorded |
| 5 |
I have no problems with editing crontabs to acchieve, what I want :) |
| 6 |
|
| 7 |
What should work is: |
| 8 |
1) The PC should wake up from suspend-to-ram or (better!) |
| 9 |
suspend-to-disk state (suspend-to-* works both already). |
| 10 |
2) Therefore it must be possible to store the wake-up time |
| 11 |
somewhere. |
| 12 |
3) The DVBT-card should be set to the correct channel and |
| 13 |
it is sufficient to store the whole *.ts-stram to disk |
| 14 |
for later processing. |
| 15 |
|
| 16 |
My PC is a desktop PC with the following hardware (as reported |
| 17 |
by lspci): |
| 18 |
|
| 19 |
00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) |
| 20 |
00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) |
| 21 |
00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) |
| 22 |
00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) |
| 23 |
00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) |
| 24 |
00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) |
| 25 |
00:0d.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port B) |
| 26 |
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (rev 40) |
| 27 |
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller |
| 28 |
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller |
| 29 |
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller |
| 30 |
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller |
| 31 |
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) |
| 32 |
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40) |
| 33 |
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) |
| 34 |
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40) |
| 35 |
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) |
| 36 |
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller |
| 37 |
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller |
| 38 |
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller |
| 39 |
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration |
| 40 |
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map |
| 41 |
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller |
| 42 |
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control |
| 43 |
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control |
| 44 |
01:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) |
| 45 |
01:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) |
| 46 |
02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) |
| 47 |
03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) |
| 48 |
03:00.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (8bit bus) |
| 49 |
04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) |
| 50 |
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8059 PCI-E Gigabit Ethernet Controller (rev 11) |
| 51 |
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller |
| 52 |
07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) |
| 53 |
07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) |
| 54 |
08:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1) |
| 55 |
|
| 56 |
|
| 57 |
I am using a recent gentoo with vanilla kernel 2.6.35.7. |
| 58 |
|
| 59 |
Thank you very much in advance for any help! |
| 60 |
|
| 61 |
Best regards and have a nice weekend! :) |
| 62 |
mcc |
Archives