1 |
Hello, |
2 |
|
3 |
I have update my system to ther 3.2.11 kernel and udev 171-rc5. Everything works fine, except the IDE DVD ROM Device. lspci shows the IDE controller |
4 |
00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) |
5 |
|
6 |
and I have build this kernel options: |
7 |
|
8 |
CONFIG_HAVE_IDE=y |
9 |
# CONFIG_IDE is not set |
10 |
|
11 |
# SCSI device support |
12 |
CONFIG_SCSI_MOD=y |
13 |
CONFIG_SCSI=y |
14 |
CONFIG_SCSI_DMA=y |
15 |
CONFIG_SCSI_TGT=m |
16 |
CONFIG_SCSI_NETLINK=y |
17 |
CONFIG_SCSI_PROC_FS=y |
18 |
# SCSI support type (disk, tape, CD-ROM) |
19 |
CONFIG_SCSI_MULTI_LUN=y |
20 |
CONFIG_SCSI_CONSTANTS=y |
21 |
CONFIG_SCSI_LOGGING=y |
22 |
CONFIG_SCSI_SCAN_ASYNC=y |
23 |
CONFIG_SCSI_WAIT_SCAN=m |
24 |
# SCSI Transports |
25 |
CONFIG_SCSI_SPI_ATTRS=m |
26 |
CONFIG_SCSI_FC_ATTRS=m |
27 |
CONFIG_SCSI_FC_TGT_ATTRS=y |
28 |
CONFIG_SCSI_ISCSI_ATTRS=y |
29 |
CONFIG_SCSI_SAS_ATTRS=m |
30 |
CONFIG_SCSI_SAS_LIBSAS=m |
31 |
CONFIG_SCSI_SAS_ATA=y |
32 |
CONFIG_SCSI_SAS_HOST_SMP=y |
33 |
CONFIG_SCSI_SRP_ATTRS=m |
34 |
CONFIG_SCSI_SRP_TGT_ATTRS=y |
35 |
CONFIG_SCSI_LOWLEVEL=y |
36 |
|
37 |
I have added the line persistent_cd_disable="no" to my /etc/udev/udec.conf and remove the /etc/udev/rules/70-presistent-cd.rule |
38 |
I don't have buld in the "ATA/ATAPI/MFM/RLL support (DEPRECATED) " dubpackages, should I need them for using my old DVD ROM? |
39 |
I have build only the "Serial ATA and Parallel ATA drivers" and SCSI systems, can I use the IDE device with this drivers only? |
40 |
|
41 |
Thanks |
42 |
|
43 |
Phil |