Gentoo Logo
Gentoo Spaceship




Note: Due to technical difficulties, the Archives are currently not up to date. GMANE provides an alternative service for most mailing lists.
c.f. bug 424647
List Archive: gentoo-user
Navigation:
Lists: gentoo-user: < Prev By Thread Next > < Prev By Date Next >
Headers:
To: gentoo-user@g.o
From: Dale <rdalek1967@...>
Subject: Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
Date: Mon, 02 Apr 2012 21:08:19 -0500
Dale wrote:

> 
> I think I got it all sorted and am building a new kernel.  It will have
> a -2 on the end instead of a -1.  I'll test it in a bit.  I got some
> things to prepare for tomorrow plus we have storms coming in tonight.
> The rain is already on the radar and it is a bit windy here.  May take a
> bit before I reboot.  Just depends.  ;-)
> 
> I'm hoping to get this sorted so I can then move on to more issues, and
> maybe a new thread. lol
> 
> Will reply in a bit on what blows up.  ROFL
> 
> Dale
> 
> :-)  :-)
> 


Well, I rebooted.  I'm also back to my old kernel.  The new kernel broke
all sorts of things.  I thought about writing down the errors until I
saw how many there was. It was PAGES of problems.  It booted to a prompt
tho.  One thing I noticed, LVM failed.  I have a drive that has LVM on
it and it would not mount although LVM service was started.  I even
restarted it and it reported no errors when starting.  I dunno.

So, this appears to be nowhere close to fixed.  Right now, this is on my
nerves again.  Let me know what you want me to post but right now, I'm
going to go have a sit down.  I'll count those things hanging from the
ceiling or something.  I can't recall what they call them but I count
them sometimes.

If I was eyeball to eyeball with the dev that started this, I could
patent and new color of purple/blue.  You know, hands around the neck
and all.  :/

I'm attaching the dmesg from the failed attempt.  It's a whopper.  I'm
not sure all the errors are in there either.  Here's grub line:

title=Initramfs-new_kernel
root (hd0,0)
kernel /bzImage-3.2.11-2 root=/dev/sda3 init=/sbin/init  rd.debug
rd.udev.debug nox
initrd /initramfs-3.2.11.img

I also tried other settings for the root line but that was the only one
that worked.

Thoughts?  Should I just switch and save myself the aggravation?

Back to my hole.

Dale

:-)  :-)

-- 
I am only responsible for what I said ... Not for what you understood or
how you interpreted my words!

Miss the compile output?  Hint:
EMERGE_DEFAULT_OPTS="--quiet-build=n"
[    0.000000] Linux version 3.2.11-gentoo (root@fireball) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #2 SMP PREEMPT Mon Apr 2 20:15:29 CDT 2012
[    0.000000] Command line: root=/dev/sda3 init=/sbin/init  rd.debug rd.udev.debug nox
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
[    0.000000]  BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfc91000 (usable)
[    0.000000]  BIOS-e820: 00000000bfcf0000 - 00000000bfcf3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfcf3000 - 00000000bfd00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfd00000 - 00000000bfe00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770T-USB3/GA-770T-USB3, BIOS F4 08/26/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BFD00000 mask FFFFFFF00000 uncachable
[    0.000000]   3 base 0000BFE00000 mask FFFFFFE00000 uncachable
[    0.000000]   4 base 000100000000 mask FFFF00000000 write-back
[    0.000000]   5 base 000200000000 mask FFFE00000000 write-back
[    0.000000]   6 base 000400000000 mask FFFFC0000000 write-back
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000440000000 aka 17408M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bfd00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbfc91 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f41e0] f41e0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 8192
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000bfc91000
[    0.000000]  0000000000 - 0080000000 page 1G
[    0.000000]  0080000000 - 00bfc00000 page 2M
[    0.000000]  00bfc00000 - 00bfc91000 page 4k
[    0.000000] kernel direct mapping tables up to bfc91000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000440000000
[    0.000000]  0100000000 - 0440000000 page 1G
[    0.000000] kernel direct mapping tables up to 440000000 @ bfc90000-bfc91000
[    0.000000] RAMDISK: 37de4000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f5c10 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000bfcf3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000bfcf3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000bfcf30c0 073E2 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000bfcf0000 00040
[    0.000000] ACPI: SSDT 00000000bfcfa580 0088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 00000000bfcfae40 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000bfcfae80 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 00000000bfcfa4c0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000440000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000440000000
[    0.000000]   NODE_DATA [000000043fffb000 - 000000043fffffff]
[    0.000000]  [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042f600000-ffff88043d5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00440000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x00000098
[    0.000000]     0: 0x00000100 -> 0x000bfc91
[    0.000000]     0: 0x00100000 -> 0x00440000
[    0.000000] On node 0 totalpages: 4193305
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 2 pages reserved
[    0.000000]   DMA zone: 3918 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 767177 pages, LIFO batch:31
[    0.000000]   Normal zone: 46592 pages used for memmap
[    0.000000]   Normal zone: 3361280 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:20200000)
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88043fc00000 s75584 r8192 d22720 u262144
[    0.000000] pcpu-alloc: s75584 r8192 d22720 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4132375
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda3 init=/sbin/init  rd.debug rd.udev.debug nox
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ b4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[    0.000000] Memory: 16390440k/17825792k available (6268k kernel code, 1052572k absent, 382780k reserved, 6642k data, 4852k init)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3217.507 MHz processor.
[    0.003002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6435.01 BogoMIPS (lpj=3217507)
[    0.003602] pid_max: default: 32768 minimum: 301
[    0.004047] Security Framework initialized
[    0.005211] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.009761] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012153] Mount-cache hash table entries: 256
[    0.012565] tseg: 00bfe00000
[    0.012567] CPU: Physical Processor ID: 0
[    0.012863] CPU: Processor Core ID: 0
[    0.013001] mce: CPU supports 6 MCE banks
[    0.013304] using AMD E400 aware idle routine
[    0.013629] ACPI: Core revision 20110623
[    0.017174] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.027478] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 03
[    0.027998] Performance Events: AMD PMU driver.
[    0.027998] ... version:                0
[    0.027998] ... bit width:              48
[    0.027998] ... generic registers:      4
[    0.027999] ... value mask:             0000ffffffffffff
[    0.028300] ... max period:             00007fffffffffff
[    0.028598] ... fixed-purpose events:   0
[    0.028998] ... event mask:             000000000000000f
[    0.029321] System has AMD C1E enabled
[    0.029628] Switch to broadcast mode on CPU0
[    0.037088] MCE: In-kernel MCE decoding enabled.
[    0.043026] Booting Node   0, Processors  #1
[    0.043122] smpboot cpu 1: start_ip = 96000
[    0.114996] Switch to broadcast mode on CPU1
[    0.119026]  #2
[    0.119074] smpboot cpu 2: start_ip = 96000
[    0.190990] Switch to broadcast mode on CPU2
[    0.195020]  #3
[    0.195068] smpboot cpu 3: start_ip = 96000
[    0.266984] Switch to broadcast mode on CPU3
[    0.266992] Brought up 4 CPUs
[    0.266994] Total of 4 processors activated (25742.66 BogoMIPS).
[    0.269155] devtmpfs: initialized
[    0.269674] NET: Registered protocol family 16
[    0.270014] kworker/u:0 used greatest stack depth: 6080 bytes left
[    0.270073] kworker/u:0 used greatest stack depth: 5680 bytes left
[    0.270730] node 0 link 0: io port [b000, ffff]
[    0.270733] TOM: 00000000c0000000 aka 3072M
[    0.270971] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.270973] node 0 link 0: mmio [a0000, bffff]
[    0.270976] node 0 link 0: mmio [c0000000, dfffffff]
[    0.270978] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.270980] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[    0.270984] TOM2: 0000000440000000 aka 17408M
[    0.271282] bus: [00, 04] on node 0 link 0
[    0.271284] bus: 00 index 0 [io  0x0000-0xffff]
[    0.271285] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.271287] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[    0.271288] bus: 00 index 3 [mem 0xe0500000-0xffffffff]
[    0.271290] bus: 00 index 4 [mem 0xe0100000-0xe04fffff]
[    0.271291] bus: 00 index 5 [mem 0x440000000-0xfcffffffff]
[    0.271301] Extended Config Space enabled on 1 nodes
[    0.271639] ACPI: bus type pci registered
[    0.272060] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.272613] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.293899] PCI: Using configuration type 1 for base access
[    0.300153] bio: create slab <bio-0> at 0
[    0.300548] ACPI: Added _OSI(Module Device)
[    0.300846] ACPI: Added _OSI(Processor Device)
[    0.300966] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.301264] ACPI: Added _OSI(Processor Aggregator Device)
[    0.302476] ACPI: EC: Look up EC in DSDT
[    0.307187] ACPI: Interpreter enabled
[    0.307964] ACPI: (supports S0 S5)
[    0.308359] ACPI: Using IOAPIC for interrupt routing
[    0.351921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.352001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.352425] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.352957] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.353256] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.353957] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.354505] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff]
[    0.354967] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[    0.354978] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.355013] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[    0.355044] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.355047] pci 0000:00:02.0: PME# disabled
[    0.355065] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[    0.355094] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.355097] pci 0000:00:09.0: PME# disabled
[    0.355108] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[    0.355137] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.355139] pci 0000:00:0a.0: PME# disabled
[    0.355165] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.355184] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
[    0.355193] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
[    0.355202] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
[    0.355211] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
[    0.355220] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
[    0.355230] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[    0.355286] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.355298] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[    0.355361] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    0.355374] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[    0.355443] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.355461] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[    0.355541] pci 0000:00:12.2: supports D1 D2
[    0.355543] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.355547] pci 0000:00:12.2: PME# disabled
[    0.355567] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.355580] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[    0.355643] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[    0.355656] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[    0.355980] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.355998] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[    0.356078] pci 0000:00:13.2: supports D1 D2
[    0.356080] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.356084] pci 0000:00:13.2: PME# disabled
[    0.356107] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.356204] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.356219] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.356229] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.356238] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.356247] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.356256] pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
[    0.356312] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.356333] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.356397] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.356401] pci 0000:00:14.2: PME# disabled
[    0.356414] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.356487] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.356528] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.356541] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[    0.356607] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.356622] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.356636] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.356649] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.356664] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.356712] pci 0000:01:00.0: [10de:0a20] type 0 class 0x000300
[    0.356721] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[    0.356731] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.356741] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
[    0.356748] pci 0000:01:00.0: reg 24: [io  0xef00-0xef7f]
[    0.356755] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[    0.356808] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403
[    0.356817] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
[    0.357974] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.358276] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.358279] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
[    0.358282] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.358321] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[    0.358336] pci 0000:02:00.0: reg 10: [mem 0xfdafe000-0xfdafffff 64bit]
[    0.358407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.358410] pci 0000:02:00.0: PME# disabled
[    0.359973] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.360276] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.360278] pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.360281] pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.360320] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[    0.360333] pci 0000:03:00.0: reg 10: [io  0xce00-0xceff]
[    0.360352] pci 0000:03:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref]
[    0.360365] pci 0000:03:00.0: reg 20: [mem 0xfddf8000-0xfddfbfff 64bit pref]
[    0.360374] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.360420] pci 0000:03:00.0: supports D1 D2
[    0.360422] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.360425] pci 0000:03:00.0: PME# disabled
[    0.361972] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[    0.362273] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
[    0.362276] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.362279] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.362329] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
[    0.362352] pci 0000:04:0e.0: reg 10: [mem 0xfdcff000-0xfdcff7ff]
[    0.362364] pci 0000:04:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff]
[    0.362455] pci 0000:04:0e.0: supports D1 D2
[    0.362457] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.362462] pci 0000:04:0e.0: PME# disabled
[    0.362495] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[    0.362806] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.362810] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.362814] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
[    0.362816] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.362818] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.362820] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.362822] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.362824] pci 0000:00:14.4:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[    0.362839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.363103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.363158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.363194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[    0.363219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.363247]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.363550]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.363955] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.376553] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.377614] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.378706] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.379747] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.380839] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.381980] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.383273] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.384613] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.385813] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.385953] vgaarb: loaded
[    0.386248] vgaarb: bridge control possible 0000:01:00.0
[    0.387118] SCSI subsystem initialized
[    0.387505] libata version 3.00 loaded.
[    0.387568] usbcore: registered new interface driver usbfs
[    0.387897] usbcore: registered new interface driver hub
[    0.387987] usbcore: registered new device driver usb
[    0.388439] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.388951] PCI: Using ACPI for IRQ routing
[    0.397731] PCI: pci_cache_line_size set to 64 bytes
[    0.397738] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    0.398023] reserve RAM buffer: 0000000000098400 - 000000000009ffff 
[    0.398025] reserve RAM buffer: 00000000bfc91000 - 00000000bfffffff 
[    0.398266] cfg80211: Calling CRDA to update world regulatory domain
[    0.399040] NetLabel: Initializing
[    0.399339] NetLabel:  domain hash size = 128
[    0.399636] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.399957] NetLabel:  unlabeled traffic allowed by default
[    0.400262] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.400789] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.402981] Switching to clocksource hpet
[    0.410269] pnp: PnP ACPI init
[    0.410578] ACPI: bus type pnp registered
[    0.410937] pnp 00:00: [bus 00-ff]
[    0.410939] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.410941] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.410943] pnp 00:00: [io  0x0d00-0xffff window]
[    0.410945] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.410947] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.410949] pnp 00:00: [mem 0xbff00000-0xfebfffff window]
[    0.411037] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.411046] pnp 00:01: [io  0x0010-0x001f]
[    0.411047] pnp 00:01: [io  0x0022-0x003f]
[    0.411049] pnp 00:01: [io  0x0044-0x005f]
[    0.411051] pnp 00:01: [io  0x0062-0x0063]
[    0.411052] pnp 00:01: [io  0x0065-0x006f]
[    0.411054] pnp 00:01: [io  0x0074-0x007f]
[    0.411056] pnp 00:01: [io  0x0091-0x0093]
[    0.411058] pnp 00:01: [io  0x00a2-0x00bf]
[    0.411060] pnp 00:01: [io  0x00e0-0x00ef]
[    0.411061] pnp 00:01: [io  0x04d0-0x04d1]
[    0.411063] pnp 00:01: [io  0x0220-0x0225]
[    0.411064] pnp 00:01: [io  0x0290-0x0294]
[    0.411128] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.411436] system 00:01: [io  0x0220-0x0225] has been reserved
[    0.411737] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.412038] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.431544] pnp 00:02: [io  0x4100-0x411f]
[    0.431547] pnp 00:02: [io  0x0228-0x022f]
[    0.431548] pnp 00:02: [io  0x040b]
[    0.431550] pnp 00:02: [io  0x04d6]
[    0.431551] pnp 00:02: [io  0x0c00-0x0c01]
[    0.431553] pnp 00:02: [io  0x0c14]
[    0.431554] pnp 00:02: [io  0x0c50-0x0c52]
[    0.431556] pnp 00:02: [io  0x0c6c-0x0c6d]
[    0.431557] pnp 00:02: [io  0x0c6f]
[    0.431559] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.431561] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.431562] pnp 00:02: [io  0x0cd4-0x0cdf]
[    0.431564] pnp 00:02: [io  0x4000-0x40fe]
[    0.431565] pnp 00:02: [io  0x4210-0x4217]
[    0.431567] pnp 00:02: [io  0x0b00-0x0b0f]
[    0.431568] pnp 00:02: [io  0x0b10-0x0b1f]
[    0.431570] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.431572] pnp 00:02: [mem 0x00000000-0x00000fff window]
[    0.431574] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[    0.431579] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.432157] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[    0.432723] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.433360] system 00:02: [io  0x4100-0x411f] has been reserved
[    0.433671] system 00:02: [io  0x0228-0x022f] has been reserved
[    0.433972] system 00:02: [io  0x040b] has been reserved
[    0.434273] system 00:02: [io  0x04d6] has been reserved
[    0.434578] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.434880] system 00:02: [io  0x0c14] has been reserved
[    0.435179] system 00:02: [io  0x0c50-0x0c52] has been reserved
[    0.435489] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
[    0.435789] system 00:02: [io  0x0c6f] has been reserved
[    0.436088] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.436387] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.436695] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
[    0.436996] system 00:02: [io  0x4000-0x40fe] has been reserved
[    0.437296] system 00:02: [io  0x4210-0x4217] has been reserved
[    0.437603] system 00:02: [io  0x0b00-0x0b0f] has been reserved
[    0.437905] system 00:02: [io  0x0b10-0x0b1f] has been reserved
[    0.438204] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.438512] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.439062] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.439146] pnp 00:03: [dma 4]
[    0.439147] pnp 00:03: [io  0x0000-0x000f]
[    0.439149] pnp 00:03: [io  0x0080-0x0090]
[    0.439151] pnp 00:03: [io  0x0094-0x009f]
[    0.439153] pnp 00:03: [io  0x00c0-0x00df]
[    0.439231] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.439258] pnp 00:04: [irq 0 disabled]
[    0.439269] pnp 00:04: [irq 8]
[    0.439271] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.439316] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.439337] pnp 00:05: [io  0x0070-0x0073]
[    0.439380] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.439387] pnp 00:06: [io  0x0061]
[    0.439440] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.439448] pnp 00:07: [io  0x00f0-0x00ff]
[    0.439456] pnp 00:07: [irq 13]
[    0.439499] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.439620] pnp 00:08: [io  0x03f0-0x03f5]
[    0.439622] pnp 00:08: [io  0x03f7]
[    0.439629] pnp 00:08: [irq 6]
[    0.439631] pnp 00:08: [dma 2]
[    0.439687] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.439826] pnp 00:09: [io  0x03f8-0x03ff]
[    0.439833] pnp 00:09: [irq 4]
[    0.439896] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.440045] pnp 00:0a: [io  0x0378-0x037f]
[    0.440052] pnp 00:0a: [irq 7]
[    0.440113] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.440194] pnp 00:0b: [irq 12]
[    0.440242] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.440258] pnp 00:0c: [io  0x0060]
[    0.440260] pnp 00:0c: [io  0x0064]
[    0.440267] pnp 00:0c: [irq 1]
[    0.440315] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.440338] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.440403] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.440709] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.440818] pnp 00:0e: [mem 0x000d4400-0x000d7fff]
[    0.440820] pnp 00:0e: [mem 0x000f0000-0x000f7fff]
[    0.440822] pnp 00:0e: [mem 0x000f8000-0x000fbfff]
[    0.440823] pnp 00:0e: [mem 0x000fc000-0x000fffff]
[    0.440825] pnp 00:0e: [mem 0xbfcf0000-0xbfcfffff]
[    0.440827] pnp 00:0e: [mem 0xffff0000-0xffffffff]
[    0.440828] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.440830] pnp 00:0e: [mem 0x00100000-0xbfceffff]
[    0.440832] pnp 00:0e: [mem 0xbfd00000-0xbfdfffff]
[    0.440833] pnp 00:0e: [mem 0xbfe00000-0xbfefffff]
[    0.440835] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[    0.440837] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[    0.440838] pnp 00:0e: [mem 0xfff80000-0xfffeffff]
[    0.440842] pnp 00:0e: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.441399] pnp 00:0e: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.441958] pnp 00:0e: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.442521] pnp 00:0e: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.443077] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.443639] pnp 00:0e: disabling [mem 0x00100000-0xbfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.444296] system 00:0e: [mem 0xbfcf0000-0xbfcfffff] could not be reserved
[    0.444606] system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
[    0.444905] system 00:0e: [mem 0xbfd00000-0xbfdfffff] has been reserved
[    0.445205] system 00:0e: [mem 0xbfe00000-0xbfefffff] could not be reserved
[    0.445512] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.445814] system 00:0e: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.446116] system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.446419] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.446448] pnp: PnP ACPI: found 15 devices
[    0.446745] ACPI: ACPI bus type pnp unregistered
[    0.451675] PCI: max bus depth: 1 pci_try_num: 2
[    0.451692] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd007ffff pref]
[    0.452242] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.452548] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.452849] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
[    0.453150] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.453707] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.454006] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.454306] pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.454614] pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.455166] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[    0.455722] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[    0.456021] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
[    0.456329] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.456638] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.457190] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[    0.457496] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.457800] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.458101] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
[    0.458673] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.458976] pci 0000:00:02.0: setting latency timer to 64
[    0.458986] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.459286] pci 0000:00:09.0: setting latency timer to 64
[    0.459290] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.459599] pci 0000:00:0a.0: setting latency timer to 64
[    0.459605] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.459607] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.459609] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.459610] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.459612] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[    0.459614] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.459616] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[    0.459618] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.459620] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.459622] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.459623] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.459625] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.459627] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.459629] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.459631] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.459633] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.459635] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[    0.459636] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.459638] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.459640] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.459642] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[    0.459644] pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff]
[    0.459703] NET: Registered protocol family 2
[    0.460264] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.462204] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.464735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.465269] TCP: Hash tables configured (established 524288 bind 65536)
[    0.465579] TCP reno registered
[    0.465893] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.466275] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.466749] NET: Registered protocol family 1
[    0.467158] RPC: Registered named UNIX socket transport module.
[    0.467469] RPC: Registered udp transport module.
[    0.467768] RPC: Registered tcp transport module.
[    0.468069] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.468401] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.531498] pci 0000:00:12.0: PCI INT A disabled
[    0.531812] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.594496] pci 0000:00:12.1: PCI INT A disabled
[    0.594811] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.595154] pci 0000:00:12.2: PCI INT B disabled
[    0.595466] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.658496] pci 0000:00:13.0: PCI INT A disabled
[    0.658810] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.721496] pci 0000:00:13.1: PCI INT A disabled
[    0.721827] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.722171] pci 0000:00:13.2: PCI INT B disabled
[    0.722495] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.785494] pci 0000:00:14.5: PCI INT C disabled
[    0.785824] pci 0000:01:00.0: Boot video device
[    0.785841] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.786184] pci 0000:02:00.0: PCI INT A disabled
[    0.786499] PCI: CLS 64 bytes, default 64
[    0.788803] Trying to unpack rootfs image as initramfs...
[    0.823335] Freeing initrd memory: 2096k freed
[    0.824871] PCI-DMA: Disabling AGP.
[    0.828233] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    0.828541] PCI-DMA: using GART IOMMU.
[    0.828840] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.833477] IBS: LVT offset 1 assigned
[    0.833790] perf: AMD IBS detected (0x0000001f)
[    0.834713] audit: initializing netlink socket (disabled)
[    0.835020] type=2000 audit(1333417416.833:1): initialized
[    0.865937] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.866778] NTFS driver 2.1.30 [Flags: R/W].
[    0.867219] fuse init (API version 7.17)
[    0.867619] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.869163] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[    0.870175] Btrfs loaded
[    0.870482] msgmni has been set to 32145
[    0.871052] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.871609] io scheduler noop registered
[    0.871910] io scheduler deadline registered
[    0.872248] io scheduler cfq registered (default)
[    0.872687] pcieport 0000:00:02.0: setting latency timer to 64
[    0.872711] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.872793] pcieport 0000:00:09.0: setting latency timer to 64
[    0.872813] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[    0.872889] pcieport 0000:00:0a.0: setting latency timer to 64
[    0.872908] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[    0.873114] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.137611] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.158850] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.159529] Non-volatile memory driver v1.3
[    1.160587] modprobe used greatest stack depth: 5480 bytes left
[    1.160905] ppdev: user-space parallel port driver
[    1.161202] Linux agpgart interface v0.103
[    1.161642] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.162192] ACPI: Power Button [PWRB]
[    1.162582] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.163132] ACPI: Power Button [PWRF]
[    1.163534] ACPI: processor limited to max C-state 1
[    1.181234] [drm] Initialized drm 1.1.0 20060810
[    1.181603] parport_pc 00:0a: reported by Plug and Play ACPI
[    1.181922] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    1.184414] brd: module loaded
[    1.185560] loop: module loaded
[    1.186120] ahci 0000:00:11.0: version 3.0
[    1.186139] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.186559] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.193473] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs 
[    1.194982] scsi0 : ahci
[    1.195402] scsi1 : ahci
[    1.195791] scsi2 : ahci
[    1.196170] scsi3 : ahci
[    1.196559] scsi4 : ahci
[    1.196937] scsi5 : ahci
[    1.197382] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    1.197947] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    1.198502] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    1.199053] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    1.199611] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[    1.200162] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[    1.201102] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.201424] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.201739] r8169 0000:03:00.0: setting latency timer to 64
[    1.201775] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    1.202024] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9000181e000, 1c:6f:65:4c:91:c7, XID 083000c0 IRQ 43
[    1.202587] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.203205] PPP generic driver version 2.4.2
[    1.203758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.204058] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[    1.204087] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.204396] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.204714] drivers/usb/core/inode.c: creating file 'devices'
[    1.204717] drivers/usb/core/inode.c: creating file '001'
[    1.204772] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.205326] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
[    1.205329] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[    1.205333] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.205914] ehci_hcd 0000:00:12.2: debug port 1
[    1.206215] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.206223] ehci_hcd 0000:00:12.2: MWI active
[    1.206224] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[    1.206242] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[    1.206556] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.206562] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[    1.212469] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.212791] usb usb1: default language 0x0409
[    1.212796] usb usb1: udev 1, busnum 1, minor = 0
[    1.212798] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.213099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.213658] usb usb1: Product: EHCI Host Controller
[    1.213956] usb usb1: Manufacturer: Linux 3.2.11-gentoo ehci_hcd
[    1.214256] usb usb1: SerialNumber: 0000:00:12.2
[    1.214654] usb usb1: usb_probe_device
[    1.214657] usb usb1: configuration #1 chosen from 1 choice
[    1.214663] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    1.214700] hub 1-0:1.0: usb_probe_interface
[    1.214702] hub 1-0:1.0: usb_probe_interface - got id
[    1.214703] hub 1-0:1.0: USB hub found
[    1.215003] hub 1-0:1.0: 6 ports detected
[    1.215300] hub 1-0:1.0: standalone hub
[    1.215301] hub 1-0:1.0: no power switching (usb 1.0)
[    1.215303] hub 1-0:1.0: individual port over-current protection
[    1.215305] hub 1-0:1.0: power on to power good time: 20ms
[    1.215308] hub 1-0:1.0: local power source is good
[    1.215310] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    1.215337] drivers/usb/core/inode.c: creating file '001'
[    1.215371] work_for_cpu used greatest stack depth: 5384 bytes left
[    1.215696] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.216007] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.216311] drivers/usb/core/inode.c: creating file '002'
[    1.216393] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.216952] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
[    1.216955] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[    1.216959] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.217536] ehci_hcd 0000:00:13.2: debug port 1
[    1.217836] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.217844] ehci_hcd 0000:00:13.2: MWI active
[    1.217846] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[    1.217863] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[    1.218164] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.218170] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[    1.223468] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.223789] usb usb2: default language 0x0409
[    1.223794] usb usb2: udev 1, busnum 2, minor = 128
[    1.223796] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.224096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.224654] usb usb2: Product: EHCI Host Controller
[    1.224953] usb usb2: Manufacturer: Linux 3.2.11-gentoo ehci_hcd
[    1.225251] usb usb2: SerialNumber: 0000:00:13.2
[    1.225648] usb usb2: usb_probe_device
[    1.225650] usb usb2: configuration #1 chosen from 1 choice
[    1.225655] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    1.225692] hub 2-0:1.0: usb_probe_interface
[    1.225693] hub 2-0:1.0: usb_probe_interface - got id
[    1.225695] hub 2-0:1.0: USB hub found
[    1.225992] hub 2-0:1.0: 6 ports detected
[    1.226291] hub 2-0:1.0: standalone hub
[    1.226292] hub 2-0:1.0: no power switching (usb 1.0)
[    1.226294] hub 2-0:1.0: individual port over-current protection
[    1.226295] hub 2-0:1.0: power on to power good time: 20ms
[    1.226299] hub 2-0:1.0: local power source is good
[    1.226300] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    1.226326] drivers/usb/core/inode.c: creating file '001'
[    1.226409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.226716] ohci_hcd: block sizes: ed 80 td 96
[    1.226749] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.227063] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.227365] drivers/usb/core/inode.c: creating file '003'
[    1.227456] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.228018] ohci_hcd 0000:00:12.0: created debug files
[    1.228020] ohci_hcd 0000:00:12.0: supports USB remote wakeup
[    1.228038] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[    1.282480] ohci_hcd 0000:00:12.0: OHCI controller state
[    1.282485] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
[    1.282489] ohci_hcd 0000:00:12.0: control 0x083 HCFS=operational CBSR=3
[    1.282492] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
[    1.282495] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
[    1.282499] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[    1.282508] ohci_hcd 0000:00:12.0: hcca frame #0005
[    1.282511] ohci_hcd 0000:00:12.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[    1.282514] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
[    1.282517] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
[    1.282521] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
[    1.282524] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
[    1.282528] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
[    1.282538] usb usb3: default language 0x0409
[    1.282543] usb usb3: udev 1, busnum 3, minor = 256
[    1.282544] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.282845] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.283395] usb usb3: Product: OHCI Host Controller
[    1.283701] usb usb3: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[    1.283999] usb usb3: SerialNumber: 0000:00:12.0
[    1.284401] usb usb3: usb_probe_device
[    1.284403] usb usb3: configuration #1 chosen from 1 choice
[    1.284411] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    1.284453] hub 3-0:1.0: usb_probe_interface
[    1.284455] hub 3-0:1.0: usb_probe_interface - got id
[    1.284456] hub 3-0:1.0: USB hub found
[    1.284757] hub 3-0:1.0: 3 ports detected
[    1.285054] hub 3-0:1.0: standalone hub
[    1.285056] hub 3-0:1.0: no power switching (usb 1.0)
[    1.285057] hub 3-0:1.0: global over-current protection
[    1.285059] hub 3-0:1.0: power on to power good time: 4ms
[    1.285063] hub 3-0:1.0: local power source is good
[    1.285064] hub 3-0:1.0: no over-current condition exists
[    1.285066] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    1.285077] drivers/usb/core/inode.c: creating file '001'
[    1.285136] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.285458] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    1.285761] drivers/usb/core/inode.c: creating file '004'
[    1.285827] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.286394] ohci_hcd 0000:00:12.1: created debug files
[    1.286396] ohci_hcd 0000:00:12.1: supports USB remote wakeup
[    1.286400] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[    1.314485] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[    1.325483] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[    1.341478] ohci_hcd 0000:00:12.1: OHCI controller state
[    1.341482] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers
[    1.341485] ohci_hcd 0000:00:12.1: control 0x083 HCFS=operational CBSR=3
[    1.341489] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0
[    1.341492] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF
[    1.341495] ohci_hcd 0000:00:12.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[    1.341504] ohci_hcd 0000:00:12.1: hcca frame #0005
[    1.341508] ohci_hcd 0000:00:12.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[    1.341511] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000
[    1.341514] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE
[    1.341517] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS
[    1.341520] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS
[    1.341524] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS
[    1.341532] usb usb4: default language 0x0409
[    1.341537] usb usb4: udev 1, busnum 4, minor = 384
[    1.341539] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.341839] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.342388] usb usb4: Product: OHCI Host Controller
[    1.342694] usb usb4: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[    1.342993] usb usb4: SerialNumber: 0000:00:12.1
[    1.343394] usb usb4: usb_probe_device
[    1.343396] usb usb4: configuration #1 chosen from 1 choice
[    1.343400] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    1.343445] hub 4-0:1.0: usb_probe_interface
[    1.343446] hub 4-0:1.0: usb_probe_interface - got id
[    1.343448] hub 4-0:1.0: USB hub found
[    1.343748] hub 4-0:1.0: 3 ports detected
[    1.344045] hub 4-0:1.0: standalone hub
[    1.344047] hub 4-0:1.0: no power switching (usb 1.0)
[    1.344048] hub 4-0:1.0: global over-current protection
[    1.344049] hub 4-0:1.0: power on to power good time: 4ms
[    1.344054] hub 4-0:1.0: local power source is good
[    1.344055] hub 4-0:1.0: no over-current condition exists
[    1.344057] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    1.344068] drivers/usb/core/inode.c: creating file '001'
[    1.344125] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.344446] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.344746] drivers/usb/core/inode.c: creating file '005'
[    1.344810] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.345374] ohci_hcd 0000:00:13.0: created debug files
[    1.345376] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[    1.345394] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[    1.384478] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[    1.400475] ohci_hcd 0000:00:13.0: OHCI controller state
[    1.400479] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[    1.400483] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
[    1.400486] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[    1.400489] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[    1.400492] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[    1.400501] ohci_hcd 0000:00:13.0: hcca frame #0005
[    1.400505] ohci_hcd 0000:00:13.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[    1.400508] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[    1.400511] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[    1.400514] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[    1.400518] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[    1.400521] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[    1.400531] usb usb5: default language 0x0409
[    1.400536] usb usb5: udev 1, busnum 5, minor = 512
[    1.400538] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.400839] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.401389] usb usb5: Product: OHCI Host Controller
[    1.401693] usb usb5: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[    1.401994] usb usb5: SerialNumber: 0000:00:13.0
[    1.402395] usb usb5: usb_probe_device
[    1.402396] usb usb5: configuration #1 chosen from 1 choice
[    1.402401] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    1.402447] hub 5-0:1.0: usb_probe_interface
[    1.402448] hub 5-0:1.0: usb_probe_interface - got id
[    1.402450] hub 5-0:1.0: USB hub found
[    1.402754] hub 5-0:1.0: 3 ports detected
[    1.403052] hub 5-0:1.0: standalone hub
[    1.403053] hub 5-0:1.0: no power switching (usb 1.0)
[    1.403054] hub 5-0:1.0: global over-current protection
[    1.403056] hub 5-0:1.0: power on to power good time: 4ms
[    1.403060] hub 5-0:1.0: local power source is good
[    1.403061] hub 5-0:1.0: no over-current condition exists
[    1.403063] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    1.403074] drivers/usb/core/inode.c: creating file '001'
[    1.403132] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.403453] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.403754] drivers/usb/core/inode.c: creating file '006'
[    1.403822] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.404385] ohci_hcd 0000:00:13.1: created debug files
[    1.404386] ohci_hcd 0000:00:13.1: supports USB remote wakeup
[    1.404391] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[    1.443478] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000
[    1.459475] ohci_hcd 0000:00:13.1: OHCI controller state
[    1.459479] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[    1.459482] ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
[    1.459485] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[    1.459489] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[    1.459492] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[    1.459501] ohci_hcd 0000:00:13.1: hcca frame #0005
[    1.459504] ohci_hcd 0000:00:13.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[    1.459507] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[    1.459510] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[    1.459514] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
[    1.459517] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
[    1.459520] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
[    1.459529] usb usb6: default language 0x0409
[    1.459534] usb usb6: udev 1, busnum 6, minor = 640
[    1.459535] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.459839] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.460385] usb usb6: Product: OHCI Host Controller
[    1.460689] usb usb6: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[    1.460989] usb usb6: SerialNumber: 0000:00:13.1
[    1.461391] usb usb6: usb_probe_device
[    1.461393] usb usb6: configuration #1 chosen from 1 choice
[    1.461398] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[    1.461442] hub 6-0:1.0: usb_probe_interface
[    1.461443] hub 6-0:1.0: usb_probe_interface - got id
[    1.461445] hub 6-0:1.0: USB hub found
[    1.461746] hub 6-0:1.0: 3 ports detected
[    1.462045] hub 6-0:1.0: standalone hub
[    1.462046] hub 6-0:1.0: no power switching (usb 1.0)
[    1.462047] hub 6-0:1.0: global over-current protection
[    1.462049] hub 6-0:1.0: power on to power good time: 4ms
[    1.462053] hub 6-0:1.0: local power source is good
[    1.462055] hub 6-0:1.0: no over-current condition exists
[    1.462056] hub 6-0:1.0: trying to enable port power on non-switchable hub
[    1.462067] drivers/usb/core/inode.c: creating file '001'
[    1.462126] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.462447] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.462750] drivers/usb/core/inode.c: creating file '007'
[    1.462817] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.463381] ohci_hcd 0000:00:14.5: created debug files
[    1.463382] ohci_hcd 0000:00:14.5: supports USB remote wakeup
[    1.463387] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[    1.502478] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
[    1.506499] ata6: SATA link down (SStatus 0 SControl 300)
[    1.506864] ata5: SATA link down (SStatus 0 SControl 300)
[    1.518474] ohci_hcd 0000:00:14.5: OHCI controller state
[    1.518478] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers
[    1.518482] ohci_hcd 0000:00:14.5: control 0x083 HCFS=operational CBSR=3
[    1.518485] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
[    1.518488] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
[    1.518491] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
[    1.518500] ohci_hcd 0000:00:14.5: hcca frame #0005
[    1.518503] ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[    1.518507] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
[    1.518510] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
[    1.518513] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
[    1.518516] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
[    1.518525] usb usb7: default language 0x0409
[    1.518530] usb usb7: udev 1, busnum 7, minor = 768
[    1.518531] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.518832] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.519380] usb usb7: Product: OHCI Host Controller
[    1.519685] usb usb7: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[    1.519985] usb usb7: SerialNumber: 0000:00:14.5
[    1.520385] usb usb7: usb_probe_device
[    1.520387] usb usb7: configuration #1 chosen from 1 choice
[    1.520392] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[    1.520437] hub 7-0:1.0: usb_probe_interface
[    1.520438] hub 7-0:1.0: usb_probe_interface - got id
[    1.520440] hub 7-0:1.0: USB hub found
[    1.520740] hub 7-0:1.0: 2 ports detected
[    1.521039] hub 7-0:1.0: standalone hub
[    1.521040] hub 7-0:1.0: no power switching (usb 1.0)
[    1.521041] hub 7-0:1.0: global over-current protection
[    1.521043] hub 7-0:1.0: power on to power good time: 4ms
[    1.521047] hub 7-0:1.0: local power source is good
[    1.521048] hub 7-0:1.0: no over-current condition exists
[    1.521050] hub 7-0:1.0: trying to enable port power on non-switchable hub
[    1.521061] drivers/usb/core/inode.c: creating file '001'
[    1.521097] work_for_cpu used greatest stack depth: 5136 bytes left
[    1.521405] uhci_hcd: USB Universal Host Controller Interface driver
[    1.521811] usbcore: registered new interface driver cdc_acm
[    1.522110] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.522718] usbcore: registered new interface driver usblp
[    1.523046] usbcore: registered new interface driver uas
[    1.523344] Initializing USB Mass Storage driver...
[    1.523700] usbcore: registered new interface driver usb-storage
[    1.523998] USB Mass Storage support registered.
[    1.524374] usbcore: registered new interface driver libusual
[    1.524766] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.525757] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.526068] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.526560] mousedev: PS/2 mouse device common for all mice
[    1.527112] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    1.527504] rtc_cmos 00:05: RTC can wake from S4
[    1.527899] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.528228] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.528594] i2c /dev entries driver
[    1.528958] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[    1.529527] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.530194] it87: Found IT8720F chip at 0x228, revision 8
[    1.530522] it87: Routing internal VCCH to in7
[    1.530831] it87: Beeping is supported
[    1.531554] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@...
[    1.532143] cpuidle: using governor ladder
[    1.532445] EFI Variables Facility v0.08 2004-May-17
[    1.533465] usbcore: registered new interface driver usbhid
[    1.533762] usbhid: USB HID core driver
[    1.535028] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.545977] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.551782] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.552335] hda_intel: Disabling MSI
[    1.552654] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    1.561477] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
[    1.620471] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    1.661472] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.661796] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.662121] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.662452] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.662999] ata3.00: ATA-8: WDC WD2502ABYS-18B7A0, 02.03B04, max UDMA/133
[    1.663318] ata3.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.663805] ata1.00: ATA-8: WDC WD1600AAJS-00YZCA0, 01.03B01, max UDMA/133
[    1.670673] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.670990] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[    1.671388] ata3.00: configured for UDMA/133
[    1.671700] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01117, max UDMA7
[    1.672007] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.672475] ata1.00: configured for UDMA/133
[    1.674984] ata2.00: configured for UDMA/100
[    1.678724] ata4.00: configured for UDMA/133
[    1.683537] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
[    1.684262] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.684873] sd 0:0:0:0: [sda] Write Protect is off
[    1.685172] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.685220] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.685805] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.689489] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN03 PQ: 0 ANSI: 5
[    1.698853] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.699426] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.699877] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.699969] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.700377] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2502ABYS-1 02.0 PQ: 0 ANSI: 5
[    1.701117] sd 2:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[    1.701735] sd 2:0:0:0: [sdb] Write Protect is off
[    1.701756] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.701847] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
[    1.701990] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.702022] sd 3:0:0:0: [sdc] Write Protect is off
[    1.702024] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.702054] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.702114] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.704636] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.704650] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.720047]  sdc: sdc1
[    1.720594] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.726289]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    1.726961] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.743299]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[    1.744183] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.840456] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[    1.849456] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[    1.858457] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[    1.867456] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    1.871125] ALSA device list:
[    1.871428]   #0: HDA ATI SB at 0xfe024000 irq 16
[    1.871729]   #1: HDA NVidia at 0xfcffc000 irq 18
[    1.872072] Netfilter messages via NETLINK v0.30.
[    1.872383] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.872804] ctnetlink v0.93: registering with nfnetlink.
[    1.873495] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.873824] TCP cubic registered
[    1.874122] Initializing XFRM netlink socket
[    1.874506] NET: Registered protocol family 10
[    1.875498] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.875843] IPv6 over IPv4 tunneling driver
[    1.876687] NET: Registered protocol family 17
[    1.876992] Registering the dns_resolver key type
[    1.877313] registered taskstats version 1
[    1.877908] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[    1.878485] console [netcon0] enabled
[    1.878782] netconsole: network logging started
[    1.883533] Freeing unused kernel memory: 4852k freed
[    1.884938] Write protecting the kernel read-only data: 12288k
[    1.890614] Freeing unused kernel memory: 1904k freed
[    1.896063] Freeing unused kernel memory: 1704k freed
[    1.907437] Refined TSC clocksource calibration: 3217.955 MHz.
[    1.907440] Switching to clocksource tsc
[    1.962007] dracut: + source_conf /etc/conf.d
[    1.962024] dracut: + local f
[    1.962041] dracut: + [ /etc/conf.d ]
[    1.962059] dracut: + [ -d //etc/conf.d ]
[    1.962073] dracut: + return
[    1.962092] dracut: + getarg rd.break=cmdline rdbreak=cmdline
[    1.962105] dracut: + set +x
[    1.962118] dracut: + return 1
[    1.962134] dracut: + source_hook cmdline
[    1.962153] dracut: + source_all /lib/dracut/hooks/cmdline
[    1.962167] dracut: + local f
[    1.962185] dracut: + [ /lib/dracut/hooks/cmdline ]
[    1.962206] dracut: + [ -d //lib/dracut/hooks/cmdline ]
[    1.962230] dracut: + [ -e //lib/dracut/hooks/cmdline/01parse-kernel.sh ]
[    1.962254] dracut: + . //lib/dracut/hooks/cmdline/01parse-kernel.sh
[    1.962273] dracut: + getargs rd.driver.pre rdloaddriver=
[    1.962286] dracut: + set +x
[    1.962301] dracut: + return 1
[    1.962321] dracut: + getargs rd.driver.blacklist rdblacklist=
[    1.962335] dracut: + set +x
[    1.962951] dracut: + return 1
[    1.963125] dracut: + getargs rd.driver.post rdinsmodpost=
[    1.963168] dracut: + set +x
[    1.963747] dracut: + return 1
[    1.963925] dracut: + [ -n  ]
[    1.963946] dracut: + unset _do_insmodpost
[    1.963973] dracut: + [ -e //lib/dracut/hooks/cmdline/10parse-resume.sh ]
[    1.963997] dracut: + . //lib/dracut/hooks/cmdline/10parse-resume.sh
[    1.964013] dracut: + getarg resume=
[    1.964026] dracut: + set +x
[    1.964039] dracut: + return 1
[    1.964115] dracut: + resume=
[    1.964129] dracut: + unset resume
[    1.964281] dracut: + getarg splash=
[    1.964322] dracut: + set +x
[    1.964428] dracut: + return 1
[    1.964623] dracut: + splash=
[    1.964639] dracut: + unset splash
[    1.964666] dracut: + [ -e //lib/dracut/hooks/cmdline/10parse-root-opts.sh ]
[    1.964693] dracut: + . //lib/dracut/hooks/cmdline/10parse-root-opts.sh
[    1.964708] dracut: + getarg root=
[    1.964721] dracut: + set +x
[    1.964806] dracut: + return 0
[    1.964969] dracut: + root=/dev/sda3
[    1.965045] dracut: + getarg rootflags=
[    1.965087] dracut: + set +x
[    1.965182] dracut: + return 1
[    1.965425] dracut: + rflags=
[    1.965441] dracut: + getarg rw
[    1.965454] dracut: + set +x
[    1.965467] dracut: + return 1
[    1.965483] dracut: + rflags=ro
[    1.965498] dracut: + getarg rootfstype=
[    1.965511] dracut: + set +x
[    1.965580] dracut: + return 1
[    1.965832] dracut: + fstype=
[    1.965848] dracut: + [ -z  ]
[    1.965863] dracut: + fstype=auto
[    1.965888] dracut: + [ -e //lib/dracut/hooks/cmdline/20parse-i18n.sh ]
[    1.965911] dracut: + . //lib/dracut/hooks/cmdline/20parse-i18n.sh
[    1.965936] dracut: + inst_key_val  /etc/vconsole.conf KEYMAP vconsole.keymap KEYTABLE
[    1.965951] dracut: + local _value
[    1.965965] dracut: + local _file
[    1.965979] dracut: + local _default
[    1.965993] dracut: + _default=
[    1.966005] dracut: + shift
[    1.966023] dracut: + _file=/etc/vconsole.conf
[    1.966036] dracut: + shift
[    1.966055] dracut: + getarg KEYMAP vconsole.keymap KEYTABLE
[    1.966068] dracut: + set +x
[    1.966082] dracut: + return 1
[    1.966108] dracut: + _value=
[    1.966124] dracut: + [ -z  ]
[    1.966137] dracut: + _value=
[    1.966152] dracut: + [ -n  ]
[    1.966168] dracut: + unset _file
[    1.966182] dracut: + unset _value
[    1.966206] dracut: + inst_key_val  /etc/vconsole.conf FONT vconsole.font SYSFONT
[    1.966221] dracut: + local _value
[    1.966235] dracut: + local _file
[    1.966250] dracut: + local _default
[    1.966263] dracut: + _default=
[    1.966275] dracut: + shift
[    1.966295] dracut: + _file=/etc/vconsole.conf
[    1.966308] dracut: + shift
[    1.966327] dracut: + getarg FONT vconsole.font SYSFONT
[    1.966340] dracut: + set +x
[    1.966462] dracut: + return 1
[    1.966676] dracut: + _value=
[    1.966691] dracut: + [ -z  ]
[    1.966705] dracut: + _value=
[    1.966718] dracut: + [ -n  ]
[    1.966734] dracut: + unset _file
[    1.966748] dracut: + unset _value
[    1.966774] dracut: + inst_key_val  /etc/vconsole.conf FONT_MAP vconsole.font.map CONTRANS
[    1.966789] dracut: + local _value
[    1.966802] dracut: + local _file
[    1.966816] dracut: + local _default
[    1.966829] dracut: + _default=
[    1.966841] dracut: + shift
[    1.966857] dracut: + _file=/etc/vconsole.conf
[    1.966870] dracut: + shift
[    1.966890] dracut: + getarg FONT_MAP vconsole.font.map CONTRANS
[    1.966903] dracut: + set +x
[    1.966915] dracut: + return 1
[    1.966950] dracut: + _value=
[    1.966964] dracut: + [ -z  ]
[    1.966977] dracut: + _value=
[    1.966992] dracut: + [ -n  ]
[    1.967007] dracut: + unset _file
[    1.967021] dracut: + unset _value
[    1.967048] dracut: + inst_key_val  /etc/vconsole.conf FONT_UNIMAP vconsole.font.unimap UNIMAP
[    1.967063] dracut: + local _value
[    1.967077] dracut: + local _file
[    1.967091] dracut: + local _default
[    1.967104] dracut: + _default=
[    1.967116] dracut: + shift
[    1.967134] dracut: + _file=/etc/vconsole.conf
[    1.967147] dracut: + shift
[    1.967168] dracut: + getarg FONT_UNIMAP vconsole.font.unimap UNIMAP
[    1.967181] dracut: + set +x
[    1.967292] dracut: + return 1
[    1.967421] dracut: + _value=
[    1.967436] dracut: + [ -z  ]
[    1.967561] dracut: + _value=
[    1.967576] dracut: + [ -n  ]
[    1.967590] dracut: + unset _file
[    1.967605] dracut: + unset _value
[    1.967636] dracut: + inst_key_val 1 /etc/vconsole.conf UNICODE vconsole.unicode vconsole.font.unicode
[    1.967651] dracut: + local _value
[    1.967665] dracut: + local _file
[    1.967679] dracut: + local _default
[    1.967693] dracut: + _default=1
[    1.967705] dracut: + shift
[    1.967722] dracut: + _file=/etc/vconsole.conf
[    1.967734] dracut: + shift
[    1.967758] dracut: + getarg UNICODE vconsole.unicode vconsole.font.unicode
[    1.967771] dracut: + set +x
[    1.967785] dracut: + return 1
[    1.967828] dracut: + _value=
[    1.967842] dracut: + [ -z  ]
[    1.967856] dracut: + _value=1
[    1.967870] dracut: + [ -n 1 ]
[    1.967891] dracut: + printf %s="%s"n UNICODE 1
[    1.967908] dracut: + unset _file
[    1.967922] dracut: + unset _value
[    1.967950] dracut: + inst_key_val  /etc/vconsole.conf EXT_KEYMAP vconsole.keymap.ext
[    1.967965] dracut: + local _value
[    1.967978] dracut: + local _file
[    1.967992] dracut: + local _default
[    1.968005] dracut: + _default=
[    1.968018] dracut: + shift
[    1.968036] dracut: + _file=/etc/vconsole.conf
[    1.968049] dracut: + shift
[    1.968068] dracut: + getarg EXT_KEYMAP vconsole.keymap.ext
[    1.968081] dracut: + set +x
[    1.968157] dracut: + return 1
[    1.968370] dracut: + _value=
[    1.968385] dracut: + [ -z  ]
[    1.968414] dracut: + _value=
[    1.968428] dracut: + [ -n  ]
[    1.968445] dracut: + unset _file
[    1.968459] dracut: + unset _value
[    1.968481] dracut: + inst_key_val  /etc/locale.conf LANG locale.LANG
[    1.968495] dracut: + local _value
[    1.968509] dracut: + local _file
[    1.968523] dracut: + local _default
[    1.968536] dracut: + _default=
[    1.968548] dracut: + shift
[    1.968564] dracut: + _file=/etc/locale.conf
[    1.968576] dracut: + shift
[    1.968592] dracut: + getarg LANG locale.LANG
[    1.968605] dracut: + set +x
[    1.968618] dracut: + return 1
[    1.968633] dracut: + _value=
[    1.968646] dracut: + [ -z  ]
[    1.968662] dracut: + _value=
[    1.968677] dracut: + [ -n  ]
[    1.968690] dracut: + unset _file
[    1.968704] dracut: + unset _value
[    1.968727] dracut: + inst_key_val  /etc/locale.conf LC_ALL locale.LC_ALL
[    1.968742] dracut: + local _value
[    1.968755] dracut: + local _file
[    1.968769] dracut: + local _default
[    1.968783] dracut: + _default=
[    1.968795] dracut: + shift
[    1.968811] dracut: + _file=/etc/locale.conf
[    1.968823] dracut: + shift
[    1.968840] dracut: + getarg LC_ALL locale.LC_ALL
[    1.968852] dracut: + set +x
[    1.968907] dracut: + return 1
[    1.969447] dracut: + _value=
[    1.969463] dracut: + [ -z  ]
[    1.969476] dracut: + _value=
[    1.969490] dracut: + [ -n  ]
[    1.969508] dracut: + unset _file
[    1.969522] dracut: + unset _value
[    1.969544] dracut: + [ -f /etc/locale.conf ]
[    1.969563] dracut: + . /etc/locale.conf
[    1.969582] dracut: + LC_ALL=en_US.UTF8
[    1.969599] dracut: + LANG=en_US.UTF8
[    1.969613] dracut: + export LANG
[    1.969627] dracut: + export LC_ALL
[    1.969651] dracut: + [ -e //lib/dracut/hooks/cmdline/95parse-block.sh ]
[    1.969675] dracut: + . //lib/dracut/hooks/cmdline/95parse-block.sh
[    1.969692] dracut: + root=block:/dev/sda3
[    1.969706] dracut: + rootok=1
[    1.969726] dracut: + [ -z block:/dev/sda3 ]
[    1.969742] dracut: + [ -z 1 ]
[    1.969760] dracut: + echo root='block:/dev/sda3'
[    1.969779] dracut: + echo rflags='ro'
[    1.969796] dracut: + echo fstype='auto'
[    1.969811] dracut: + echo netroot=''
[    1.969831] dracut: + echo NEWROOT='/sysroot'
[    1.969852] dracut: + getarg rd.break=pre-udev rdbreak=pre-udev
[    1.969868] dracut: + set +x
[    1.969881] dracut: + return 1
[    1.969901] dracut: + source_hook pre-udev
[    1.969922] dracut: + source_all /lib/dracut/hooks/pre-udev
[    1.969936] dracut: + local f
[    1.969955] dracut: + [ /lib/dracut/hooks/pre-udev ]
[    1.969981] dracut: + [ -d //lib/dracut/hooks/pre-udev ]
[    1.970007] dracut: + [ -e //lib/dracut/hooks/pre-udev/30block-genrules.sh ]
[    1.970031] dracut: + . //lib/dracut/hooks/pre-udev/30block-genrules.sh
[    1.970048] dracut: + [ block = block ]
[    1.970070] dracut: + printf KERNEL=="%s", SYMLINK+="root"n sda3
[    1.970091] dracut: + printf SYMLINK=="%s", SYMLINK+="root"n sda3
[    1.970126] dracut: + printf [ -e "%s" ] && { ln -s "%s" /dev/root 2>/dev/null; rm "$job"; }n /dev/sda3 /dev/sda3
[    1.970145] dracut: + wait_for_dev /dev/sda3
[    1.970159] dracut: + local _name
[    1.970177] dracut: + str_replace /dev/sda3 / \x2f
[    1.970193] dracut: + local in=/dev/sda3
[    1.970207] dracut: + local s=/
[    1.970221] dracut: + local r=\x2f
[    1.970235] dracut: + local out=
[    1.970250] dracut: + strstr /dev/sda3 /
[    1.970268] dracut: + [ dev/sda3 != /dev/sda3 ]
[    1.970282] dracut: + chop=
[    1.970295] dracut: + out=\x2f
[    1.970309] dracut: + in=dev/sda3
[    1.970324] dracut: + strstr dev/sda3 /
[    1.970341] dracut: + [ sda3 != dev/sda3 ]
[    1.970355] dracut: + chop=dev
[    1.970370] dracut: + out=\x2fdev\x2f
[    1.970383] dracut: + in=sda3
[    1.970408] dracut: + strstr sda3 /
[    1.970425] dracut: + [ sda3 != sda3 ]
[    1.970442] dracut: + echo \x2fdev\x2fsda3
[    1.970458] dracut: + _name=x2fdevx2fsda3
[    1.970478] dracut: + printf [ -e "%s" ]n /dev/sda3
[    1.970498] dracut: + printf [ -e "%s" ] ||  /dev/sda3
[    1.970521] dracut: + printf warn ""%s" does not exist"n /dev/sda3
[    1.970547] dracut: + [ -e //lib/dracut/hooks/pre-udev/30resume-genrules.sh ]
[    1.970572] dracut: + . //lib/dracut/hooks/pre-udev/30resume-genrules.sh
[    1.970588] dracut: + a_splash=-P splash=n
[    1.970602] dracut: + [ -n  ]
[    1.970617] dracut: + getarg noresume
[    1.970630] dracut: + set +x
[    1.970643] dracut: + return 1
[    1.970661] dracut: + [ -x /usr/sbin/resume ]
[    1.970705] dracut: + echo SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",  RUN+="/bin/sh -c 'echo %M:%m > /sys/power/resume'"
[    1.970728] dracut: + udevd --daemon --resolve-names=never
[    1.970748] udevd[1008]: starting version 171
[    1.970784] dracut: + UDEV_LOG_PRIO_ARG=--log-priority
[    1.970810] dracut: + UDEV_QUEUE_EMPTY=udevadm settle --timeout=0
[    1.970829] dracut: + [ 171 -lt 140 ]
[    1.970849] dracut: + getargbool 0 rd.udev.info -y rdudevinfo
[    1.970862] dracut: + local _b
[    1.970875] dracut: + unset _b
[    1.970890] dracut: + local _default
[    1.970903] dracut: + _default=0
[    1.970915] dracut: + shift
[    1.970975] dracut: + getarg rd.udev.info -y rdudevinfo
[    1.971015] dracut: + set +x
[    1.971155] dracut: + return 1
[    1.971374] dracut: + _b=
[    1.971392] dracut: + [ 1 -ne 0 -a -z  ]
[    1.971419] dracut: + _b=0
[    1.971435] dracut: + [ -n 0 ]
[    1.971450] dracut: + [ 0 = 0 ]
[    1.971463] dracut: + return 1
[    1.971483] dracut: + getargbool 0 rd.udev.debug -y rdudevdebug
[    1.971497] dracut: + local _b
[    1.971511] dracut: + unset _b
[    1.971525] dracut: + local _default
[    1.971539] dracut: + _default=0
[    1.971551] dracut: + shift
[    1.971570] dracut: + getarg rd.udev.debug -y rdudevdebug
[    1.971583] dracut: + set +x
[    1.971596] dracut: + return 0
[    1.971609] dracut: + _b=
[    1.971628] dracut: + [ 0 -ne 0 -a -z  ]
[    1.971642] dracut: + [ -n  ]
[    1.971655] dracut: + return 0
[    1.971675] dracut: + udevadm control --log-priority=debug
[    1.972282] dracut: + udevproperty hookdir=/lib/dracut/hooks
[    1.972302] dracut: + [ -z 171 ]
[    1.972319] dracut: + [ 171 -ge 143 ]
[    1.972342] dracut: + udevadm control --property=hookdir=/lib/dracut/hooks
[    1.973723] dracut: + getarg rd.break=pre-trigger rdbreak=pre-trigger
[    1.973741] dracut: + set +x
[    1.973797] dracut: + return 1
[    1.973817] dracut: + source_hook pre-trigger
[    1.973837] dracut: + source_all /lib/dracut/hooks/pre-trigger
[    1.973850] dracut: + local f
[    1.973870] dracut: + [ /lib/dracut/hooks/pre-trigger ]
[    1.973892] dracut: + [ -d //lib/dracut/hooks/pre-trigger ]
[    1.973915] dracut: + [ -e //lib/dracut/hooks/pre-trigger/*.sh ]
[    1.973932] dracut: + udevadm control --reload
[    1.975274] dracut: + udevadm trigger --type=subsystems --action=add
[    1.979327] dracut: + udevadm trigger --type=devices --action=add
[    1.997970] dracut: + getarg rd.break=initqueue rdbreak=initqueue
[    1.997988] dracut: + set +x
[    1.998001] dracut: + return 1
[    1.999069] dracut: + getarg rd.retry rd_retry=
[    1.999110] dracut: + set +x
[    1.999240] dracut: + return 1
[    1.999500] dracut: + RDRETRY=
[    1.999515] dracut: + RDRETRY=20
[    1.999529] dracut: + RDRETRY=40
[    1.999544] dracut: + export RDRETRY
[    1.999558] dracut: + main_loop=0
[    1.999572] dracut: + export main_loop
[    1.999584] dracut: + :
[    1.999598] dracut: + check_finished
[    1.999611] dracut: + local f
[    1.999649] dracut: + [ /lib/dracut/hooks/initqueue/finished/devexists-x2fdevx2fsda3.sh = /lib/dracut/hooks/initqueue/finished/*.sh ]
[    1.999686] dracut: + [ -e /lib/dracut/hooks/initqueue/finished/devexists-x2fdevx2fsda3.sh ]
[    1.999721] dracut: + . /lib/dracut/hooks/initqueue/finished/devexists-x2fdevx2fsda3.sh
[    1.999738] dracut: + [ -e /dev/sda3 ]
[    1.999752] dracut: + return 0
[    1.999764] dracut: + break
[    1.999776] dracut: + unset job
[    1.999792] dracut: + unset queuetriggered
[    1.999808] dracut: + unset main_loop
[    1.999825] dracut: + unset RDRETRY
[    1.999848] dracut: + getarg rd.break=pre-mount rdbreak=pre-mount
[    1.999862] dracut: + set +x
[    1.999875] dracut: + return 1
[    1.999890] dracut: + source_hook pre-mount
[    1.999909] dracut: + source_all /lib/dracut/hooks/pre-mount
[    1.999922] dracut: + local f
[    1.999944] dracut: + [ /lib/dracut/hooks/pre-mount ]
[    1.999966] dracut: + [ -d //lib/dracut/hooks/pre-mount ]
[    1.999987] dracut: + [ -e //lib/dracut/hooks/pre-mount/*.sh ]
[    2.000012] dracut: + getarg rd.break=mount rdbreak=mount
[    2.000025] dracut: + set +x
[    2.000038] dracut: + return 1
[    2.000051] dracut: + i=0
[    2.000062] dracut: + :
[    2.000081] dracut: + ismounted /sysroot
[    2.000094] dracut: + read a m a
[    2.000113] dracut: + [ / = /sysroot ]
[    2.000130] dracut: + read a m a
[    2.000147] dracut: + [ /proc = /sysroot ]
[    2.000161] dracut: + read a m a
[    2.000178] dracut: + [ /sys = /sysroot ]
[    2.000192] dracut: + read a m a
[    2.000208] dracut: + [ /dev = /sysroot ]
[    2.000222] dracut: + read a m a
[    2.000239] dracut: + [ /dev/pts = /sysroot ]
[    2.000255] dracut: + read a m a
[    2.000272] dracut: + [ /dev/shm = /sysroot ]
[    2.000286] dracut: + read a m a
[    2.000305] dracut: + [ /run = /sysroot ]
[    2.000318] dracut: + read a m a
[    2.000333] dracut: + return 1
[    2.000359] dracut: + [ -f /lib/dracut/hooks/mount/10resume.sh ]
[    2.000385] dracut: + . /lib/dracut/hooks/mount/10resume.sh
[    2.000419] dracut: + PATH=/usr/sbin:/usr/bin:/sbin:/bin
[    2.000439] dracut: + [ -s /.resume -a -b  ]
[    2.000458] dracut: + ismounted /sysroot
[    2.000471] dracut: + read a m a
[    2.000487] dracut: + [ / = /sysroot ]
[    2.000503] dracut: + read a m a
[    2.000519] dracut: + [ /proc = /sysroot ]
[    2.000533] dracut: + read a m a
[    2.000548] dracut: + [ /sys = /sysroot ]
[    2.000562] dracut: + read a m a
[    2.000578] dracut: + [ /dev = /sysroot ]
[    2.000591] dracut: + read a m a
[    2.000608] dracut: + [ /dev/pts = /sysroot ]
[    2.000622] dracut: + read a m a
[    2.000638] dracut: + [ /dev/shm = /sysroot ]
[    2.000652] dracut: + read a m a
[    2.000668] dracut: + [ /run = /sysroot ]
[    2.000681] dracut: + read a m a
[    2.000698] dracut: + return 1
[    2.000720] dracut: + [ -f /lib/dracut/hooks/mount/99mount-root.sh ]
[    2.000741] dracut: + . /lib/dracut/hooks/mount/99mount-root.sh
[    2.000755] dracut: + type getarg
[    2.000770] dracut: + type det_fs
[    2.000785] dracut: + . /lib/fs-lib.sh
[    2.000799] dracut: + type getarg
[    2.000818] dracut: + [ -n block:/dev/sda3 -a -z  ]
[    2.000832] dracut: + mount_root
[    2.000845] dracut: + local _ret
[    2.000913] dracut: + det_fs /dev/sda3 auto
[    2.000958] dracut: + local _dev=/dev/sda3
[    2.000999] dracut: + local _orig=auto
[    2.001030] dracut: + local _fs
[    2.001267] dracut: + udevadm info --query=env --name=/dev/sda3
[    2.001306] dracut: + read line
[    2.002103] dracut: + str_starts UDEV_LOG=3 ID_FS_TYPE=
[    2.002167] dracut: + [ UDEV_LOG=3 != UDEV_LOG=3 ]
[    2.002200] dracut: + read line
[    2.002249] dracut: + str_starts DEVPATH=/block/sda/sda3 ID_FS_TYPE=
[    2.002305] dracut: + [ DEVPATH=/block/sda/sda3 != DEVPATH=/block/sda/sda3 ]
[    2.002337] dracut: + read line
[    2.002377] dracut: + str_starts MAJOR=8 ID_FS_TYPE=
[    2.002429] dracut: + [ MAJOR=8 != MAJOR=8 ]
[    2.002460] dracut: + read line
[    2.002501] dracut: + str_starts MINOR=3 ID_FS_TYPE=
[    2.002546] dracut: + [ MINOR=3 != MINOR=3 ]
[    2.002577] dracut: + read line
[    2.002619] dracut: + str_starts DEVNAME=sda3 ID_FS_TYPE=
[    2.002667] dracut: + [ DEVNAME=sda3 != DEVNAME=sda3 ]
[    2.002698] dracut: + read line
[    2.002743] dracut: + str_starts DEVTYPE=partition ID_FS_TYPE=
[    2.002793] dracut: + [ DEVTYPE=partition != DEVTYPE=partition ]
[    2.002825] dracut: + read line
[    2.002868] dracut: + str_starts SUBSYSTEM=block ID_FS_TYPE=
[    2.002918] dracut: + [ SUBSYSTEM=block != SUBSYSTEM=block ]
[    2.002949] dracut: + read line
[    2.003245] dracut: + _fs=
[    2.003260] dracut: + _fs=auto
[    2.003276] dracut: + [ auto = auto ]
[    2.003289] dracut: + _fs=auto
[    2.003302] dracut: + echo auto
[    2.003316] dracut: + rootfs=auto
[    2.003336] dracut: + mount -t auto -o ro,ro /dev/sda3 /sysroot
[    2.078912] REISERFS (device sda3): found reiserfs format "3.6" with standard journal
[    2.078921] REISERFS (device sda3): using ordered data mode
[    2.078923] reiserfs: using flush barriers
[    2.086980] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    2.087360] REISERFS (device sda3): checking transaction log (sda3)
[    2.145244] REISERFS (device sda3): Using r5 hash to sort names
[    2.145457] mount used greatest stack depth: 4984 bytes left
[    2.145538] dracut: + READONLY=
[    2.145555] dracut: + fsckoptions=
[    2.145577] dracut: + [ -f /sysroot/etc/sysconfig/readonly-root ]
[    2.151790] dracut: + getargbool 0 readonlyroot= -y readonlyroot
[    2.151808] dracut: + local _b
[    2.151822] dracut: + unset _b
[    2.151836] dracut: + local _default
[    2.151849] dracut: + _default=0
[    2.151861] dracut: + shift
[    2.151879] dracut: + getarg readonlyroot= -y readonlyroot
[    2.151892] dracut: + set +x
[    2.151993] dracut: + return 1
[    2.152288] dracut: + _b=
[    2.152306] dracut: + [ 1 -ne 0 -a -z  ]
[    2.152320] dracut: + _b=0
[    2.152335] dracut: + [ -n 0 ]
[    2.152350] dracut: + [ 0 = 0 ]
[    2.152367] dracut: + return 1
[    2.152383] dracut: + getarg noreadonlyroot
[    2.152395] dracut: + set +x
[    2.152417] dracut: + return 1
[    2.152434] dracut: + [ -f /sysroot/fastboot ]
[    2.152453] dracut: + getargbool 0 fastboot
[    2.152466] dracut: + local _b
[    2.152478] dracut: + unset _b
[    2.152492] dracut: + local _default
[    2.152506] dracut: + _default=0
[    2.152518] dracut: + shift
[    2.152532] dracut: + getarg fastboot
[    2.152546] dracut: + set +x
[    2.152560] dracut: + return 1
[    2.152573] dracut: + _b=
[    2.152592] dracut: + [ 1 -ne 0 -a -z  ]
[    2.152606] dracut: + _b=0
[    2.152621] dracut: + [ -n 0 ]
[    2.152636] dracut: + [ 0 = 0 ]
[    2.152649] dracut: + return 1
[    2.152667] dracut: + [ -f /sysroot/fsckoptions ]
[    2.152686] dracut: + [ -f /sysroot/forcefsck ]
[    2.152703] dracut: + getargbool 0 forcefsck
[    2.152715] dracut: + local _b
[    2.152728] dracut: + unset _b
[    2.152743] dracut: + local _default
[    2.152758] dracut: + _default=0
[    2.152770] dracut: + shift
[    2.152784] dracut: + getarg forcefsck
[    2.152796] dracut: + set +x
[    2.152858] dracut: + return 1
[    2.153101] dracut: + _b=
[    2.153119] dracut: + [ 1 -ne 0 -a -z  ]
[    2.153132] dracut: + _b=0
[    2.153145] dracut: + [ -n 0 ]
[    2.153162] dracut: + [ 0 = 0 ]
[    2.153174] dracut: + return 1
[    2.153192] dracut: + [ -f /sysroot/.autofsck ]
[    2.153206] dracut: + rootopts=
[    2.153224] dracut: + getargbool 1 rd.fstab -n rd_NO_FSTAB
[    2.153237] dracut: + local _b
[    2.153249] dracut: + unset _b
[    2.153263] dracut: + local _default
[    2.153276] dracut: + _default=1
[    2.153288] dracut: + shift
[    2.153305] dracut: + getarg rd.fstab -n rd_NO_FSTAB
[    2.153318] dracut: + set +x
[    2.153330] dracut: + return 1
[    2.153353] dracut: + _b=
[    2.153371] dracut: + [ 1 -ne 0 -a -z  ]
[    2.153385] dracut: + _b=1
[    2.153399] dracut: + [ -n 1 ]
[    2.153421] dracut: + [ 1 = 0 ]
[    2.153435] dracut: + [ 1 = no ]
[    2.153449] dracut: + [ 1 = off ]
[    2.153462] dracut: + return 0
[    2.153476] dracut: + getarg rootflags
[    2.153488] dracut: + set +x
[    2.153501] dracut: + return 1
[    2.153518] dracut: + [ -f /sysroot/etc/fstab ]
[    2.163732] dracut: + [ -L /sysroot/etc/fstab ]
[    2.163752] dracut: + rootopts=defaults
[    2.163769] dracut: + read dev mp fs opts rest
[    2.173590] dracut: + [  != # ]
[    2.173607] dracut: + continue
[    2.173623] dracut: + read dev mp fs opts rest
[    2.173639] dracut: + [  != # ]
[    2.173652] dracut: + continue
[    2.173670] dracut: + read dev mp fs opts rest
[    2.173686] dracut: + [  != # ]
[    2.173698] dracut: + continue
[    2.173714] dracut: + read dev mp fs opts rest
[    2.173727] dracut: + [  != # ]
[    2.173740] dracut: + continue
[    2.173755] dracut: + read dev mp fs opts rest
[    2.173768] dracut: + [  != # ]
[    2.173781] dracut: + continue
[    2.173796] dracut: + read dev mp fs opts rest
[    2.173810] dracut: + [  != # ]
[    2.173822] dracut: + continue
[    2.173838] dracut: + read dev mp fs opts rest
[    2.173851] dracut: + [  != # ]
[    2.173863] dracut: + continue
[    2.173879] dracut: + read dev mp fs opts rest
[    2.173893] dracut: + [  != # ]
[    2.173907] dracut: + continue
[    2.173922] dracut: + read dev mp fs opts rest
[    2.173935] dracut: + [  != # ]
[    2.173948] dracut: + continue
[    2.173964] dracut: + read dev mp fs opts rest
[    2.173978] dracut: + [  != # ]
[    2.173990] dracut: + continue
[    2.174006] dracut: + read dev mp fs opts rest
[    2.174019] dracut: + [  != # ]
[    2.174031] dracut: + continue
[    2.174047] dracut: + read dev mp fs opts rest
[    2.174060] dracut: + [  != # ]
[    2.174072] dracut: + continue
[    2.174088] dracut: + read dev mp fs opts rest
[    2.174101] dracut: + [  !=  ]
[    2.174114] dracut: + [  = / ]
[    2.174130] dracut: + read dev mp fs opts rest
[    2.174143] dracut: + [  != # ]
[    2.174155] dracut: + continue
[    2.174171] dracut: + read dev mp fs opts rest
[    2.174184] dracut: + [  !=  ]
[    2.174197] dracut: + [  = / ]
[    2.174213] dracut: + read dev mp fs opts rest
[    2.174226] dracut: + [  != # ]
[    2.174238] dracut: + continue
[    2.174254] dracut: + read dev mp fs opts rest
[    2.174272] dracut: + [ LABEL=boot != LABEL=boot ]
[    2.174287] dracut: + [ /boot = / ]
[    2.174303] dracut: + read dev mp fs opts rest
[    2.174321] dracut: + [ LABEL=root != LABEL=root ]
[    2.174335] dracut: + [ / = / ]
[    2.174352] dracut: + det_fs /dev/sda3 reiserfs
[    2.174367] dracut: + local _dev=/dev/sda3
[    2.174382] dracut: + local _orig=reiserfs
[    2.174398] dracut: + local _fs
[    2.174419] dracut: + udevadm info --query=env --name=/dev/sda3
[    2.174433] dracut: + read line
[    2.175643] dracut: + str_starts UDEV_LOG=3 ID_FS_TYPE=
[    2.175707] dracut: + [ UDEV_LOG=3 != UDEV_LOG=3 ]
[    2.175740] dracut: + read line
[    2.175788] dracut: + str_starts DEVPATH=/block/sda/sda3 ID_FS_TYPE=
[    2.175845] dracut: + [ DEVPATH=/block/sda/sda3 != DEVPATH=/block/sda/sda3 ]
[    2.175877] dracut: + read line
[    2.175917] dracut: + str_starts MAJOR=8 ID_FS_TYPE=
[    2.175963] dracut: + [ MAJOR=8 != MAJOR=8 ]
[    2.175994] dracut: + read line
[    2.176034] dracut: + str_starts MINOR=3 ID_FS_TYPE=
[    2.176078] dracut: + [ MINOR=3 != MINOR=3 ]
[    2.176109] dracut: + read line
[    2.178461] dracut: + str_starts DEVNAME=sda3 ID_FS_TYPE=
[    2.178518] dracut: + [ DEVNAME=sda3 != DEVNAME=sda3 ]
[    2.178551] dracut: + read line
[    2.178597] dracut: + str_starts DEVTYPE=partition ID_FS_TYPE=
[    2.178648] dracut: + [ DEVTYPE=partition != DEVTYPE=partition ]
[    2.178679] dracut: + read line
[    2.178722] dracut: + str_starts SUBSYSTEM=block ID_FS_TYPE=
[    2.178771] dracut: + [ SUBSYSTEM=block != SUBSYSTEM=block ]
[    2.178801] dracut: + read line
[    2.179066] dracut: + _fs=
[    2.179081] dracut: + _fs=auto
[    2.179097] dracut: + [ auto = auto ]
[    2.179112] dracut: + _fs=reiserfs
[    2.179125] dracut: + echo reiserfs
[    2.179140] dracut: + rootfs=reiserfs
[    2.179158] dracut: + rootopts=defaults
[    2.179170] dracut: + break
[    2.179237] dracut: + filter_rootopts defaults
[    2.179279] dracut: + rootopts=defaults
[    2.179313] dracut: + local OLDIFS=
[    2.179329] dracut: 
[    2.179359] dracut: + IFS=,
[    2.179400] dracut: + set -- defaults
[    2.179427] dracut: + IFS=
[    2.179442] dracut: 
[    2.179471] dracut: + local v
[    2.179524] dracut: + [ 1 -gt 0 ]
[    2.179557] dracut: + shift
[    2.179603] dracut: + [ 0 -gt 0 ]
[    2.179632] dracut: + rootopts=
[    2.179657] dracut: + echo
[    2.179835] dracut: + rootopts=
[    2.179850] dracut: + rflags=ro
[    2.179865] dracut: + umount /sysroot
[    2.185632] dracut: + [ -z  -a  != yes ]
[    2.185651] dracut: + strstr ro, _netdev
[    2.185670] dracut: + [ ro, != ro, ]
[    2.185695] dracut: + fsck_single /dev/sda3 reiserfs
[    2.185713] dracut: + local FSTAB_FILE=/etc/fstab.empty
[    2.185729] dracut: + local _dev=/dev/sda3
[    2.185744] dracut: + local _fs=reiserfs
[    2.185758] dracut: + local _fop=
[    2.185771] dracut: + local _drv
[    2.185785] dracut: + [ 3 -lt 2 ]
[    2.185801] dracut: + [ -e /dev/sda3 ]
[    2.185820] dracut: + [ -e /dev/sda3 ]
[    2.185838] dracut: + det_fs /dev/sda3 reiserfs
[    2.185853] dracut: + local _dev=/dev/sda3
[    2.185869] dracut: + local _orig=reiserfs
[    2.185882] dracut: + local _fs
[    2.186092] dracut: + udevadm info --query=env --name=/dev/sda3
[    2.187282] dracut: + read line
[    2.187336] dracut: + str_starts UDEV_LOG=3 ID_FS_TYPE=
[    2.187404] dracut: + [ UDEV_LOG=3 != UDEV_LOG=3 ]
[    2.187438] dracut: + read line
[    2.187486] dracut: + str_starts DEVPATH=/block/sda/sda3 ID_FS_TYPE=
[    2.187541] dracut: + [ DEVPATH=/block/sda/sda3 != DEVPATH=/block/sda/sda3 ]
[    2.187573] dracut: + read line
[    2.187613] dracut: + str_starts MAJOR=8 ID_FS_TYPE=
[    2.187658] dracut: + [ MAJOR=8 != MAJOR=8 ]
[    2.187689] dracut: + read line
[    2.187728] dracut: + str_starts MINOR=3 ID_FS_TYPE=
[    2.187773] dracut: + [ MINOR=3 != MINOR=3 ]
[    2.187803] dracut: + read line
[    2.187845] dracut: + str_starts DEVNAME=sda3 ID_FS_TYPE=
[    2.187893] dracut: + [ DEVNAME=sda3 != DEVNAME=sda3 ]
[    2.187925] dracut: + read line
[    2.187968] dracut: + str_starts DEVTYPE=partition ID_FS_TYPE=
[    2.188018] dracut: + [ DEVTYPE=partition != DEVTYPE=partition ]
[    2.188049] dracut: + read line
[    2.188092] dracut: + str_starts SUBSYSTEM=block ID_FS_TYPE=
[    2.188142] dracut: + [ SUBSYSTEM=block != SUBSYSTEM=block ]
[    2.188172] dracut: + read line
[    2.188348] dracut: + _fs=
[    2.188377] dracut: + _fs=auto
[    2.188439] dracut: + [ auto = auto ]
[    2.188471] dracut: + _fs=reiserfs
[    2.188502] dracut: + echo reiserfs
[    2.188742] dracut: + _fs=reiserfs
[    2.188759] dracut: + fsck_able reiserfs
[    2.188774] dracut: + type reiserfsck
[    2.188787] dracut: + return 1
[    2.188803] dracut: + return 255
[    2.188816] dracut: + _ret=255
[    2.188832] dracut: + [ 255 -ne 255 ]
[    2.188852] dracut: + info Remounting /dev/sda3 with -o ro
[    2.188866] dracut: + check_quiet
[    2.188879] dracut: + [ -z  ]
[    2.188894] dracut: + DRACUT_QUIET=yes
[    2.188912] dracut: + getargbool 0 rd.info -y rdinfo
[    2.188925] dracut: + local _b
[    2.188937] dracut: + unset _b
[    2.188951] dracut: + local _default
[    2.188965] dracut: + _default=0
[    2.188977] dracut: + shift
[    2.188993] dracut: + getarg rd.info -y rdinfo
[    2.189005] dracut: + set +x
[    2.189020] dracut: + return 1
[    2.189032] dracut: + _b=
[    2.189049] dracut: + [ 1 -ne 0 -a -z  ]
[    2.189062] dracut: + _b=0
[    2.189075] dracut: + [ -n 0 ]
[    2.189089] dracut: + [ 0 = 0 ]
[    2.189102] dracut: + return 1
[    2.189121] dracut: + getargbool 0 rd.debug -y rdinitdebug
[    2.189134] dracut: + local _b
[    2.189146] dracut: + unset _b
[    2.189160] dracut: + local _default
[    2.189173] dracut: + _default=0
[    2.189186] dracut: + shift
[    2.189206] dracut: + getarg rd.debug -y rdinitdebug
[    2.189219] dracut: + set +x
[    2.189306] dracut: + return 0
[    2.189520] dracut: Remounting /dev/sda3 with -o ro
[    2.189644] dracut: + _b=
[    2.189663] dracut: + [ 0 -ne 0 -a -z  ]
[    2.189678] dracut: + [ -n  ]
[    2.189692] dracut: + return 0
[    2.189707] dracut: + DRACUT_QUIET=no
[    2.189721] dracut: + getarg quiet
[    2.189733] dracut: + set +x
[    2.189746] dracut: + return 1
[    2.189760] dracut: + DRACUT_QUIET=yes
[    2.189782] dracut: + echo <30>dracut: Remounting /dev/sda3 with -o ro
[    2.189799] dracut: + [ yes != yes ]
[    2.189820] dracut: + mount -t reiserfs -o ro /dev/sda3 /sysroot
[    2.189833] dracut: + vinfo
[    2.189846] dracut: + read line
[    2.190355] REISERFS (device sda3): found reiserfs format "3.6" with standard journal
[    2.190361] REISERFS (device sda3): using ordered data mode
[    2.190362] reiserfs: using flush barriers
[    2.190518] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    2.190862] REISERFS (device sda3): checking transaction log (sda3)
[    2.203480] REISERFS (device sda3): Using r5 hash to sort names
[    2.203880] dracut: + [ -f /sysroot/forcefsck ]
[    2.203909] dracut: + [ -f /sysroot/.autofsck ]
[    2.203929] dracut: + ismounted /sysroot
[    2.203942] dracut: + read a m a
[    2.203958] dracut: + [ / = /sysroot ]
[    2.203973] dracut: + read a m a
[    2.203993] dracut: + [ /proc = /sysroot ]
[    2.204007] dracut: + read a m a
[    2.204024] dracut: + [ /sys = /sysroot ]
[    2.204037] dracut: + read a m a
[    2.204052] dracut: + [ /dev = /sysroot ]
[    2.204065] dracut: + read a m a
[    2.204082] dracut: + [ /dev/pts = /sysroot ]
[    2.204095] dracut: + read a m a
[    2.204111] dracut: + [ /dev/shm = /sysroot ]
[    2.204124] dracut: + read a m a
[    2.204139] dracut: + [ /run = /sysroot ]
[    2.204152] dracut: + read a m a
[    2.204168] dracut: + [ /sysroot = /sysroot ]
[    2.204180] dracut: + return 0
[    2.204195] dracut: + usable_root /sysroot
[    2.204207] dracut: + local _d
[    2.204222] dracut: + [ -d /sysroot ]
[    2.204238] dracut: + [ -e /sysroot/proc ]
[    2.214371] dracut: + [ -e /sysroot/sys ]
[    2.214532] dracut: + [ -e /sysroot/dev ]
[    2.219173] dracut: + return 0
[    2.219189] dracut: + break
[    2.219201] dracut: + i=1
[    2.219218] dracut: + [ 1 -gt 20 ]
[    2.219230] dracut: + :
[    2.219248] dracut: + ismounted /sysroot
[    2.219264] dracut: + read a m a
[    2.219279] dracut: + [ / = /sysroot ]
[    2.219293] dracut: + read a m a
[    2.219309] dracut: + [ /proc = /sysroot ]
[    2.219322] dracut: + read a m a
[    2.219341] dracut: + [ /sys = /sysroot ]
[    2.219355] dracut: + read a m a
[    2.219370] dracut: + [ /dev = /sysroot ]
[    2.219384] dracut: + read a m a
[    2.219417] dracut: + [ /dev/pts = /sysroot ]
[    2.219432] dracut: + read a m a
[    2.219448] dracut: + [ /dev/shm = /sysroot ]
[    2.219461] dracut: + read a m a
[    2.219476] dracut: + [ /run = /sysroot ]
[    2.219489] dracut: + read a m a
[    2.219505] dracut: + [ /sysroot = /sysroot ]
[    2.219517] dracut: + return 0
[    2.219532] dracut: + usable_root /sysroot
[    2.219544] dracut: + local _d
[    2.219559] dracut: + [ -d /sysroot ]
[    2.219575] dracut: + [ -e /sysroot/proc ]
[    2.219595] dracut: + [ -e /sysroot/sys ]
[    2.219611] dracut: + [ -e /sysroot/dev ]
[    2.219624] dracut: + return 0
[    2.219635] dracut: + break
[    2.219653] dracut: + echo -n Mounted root filesystem
[    2.219668] dracut: + + read dev mp rest
[    2.219679] dracut: vinfo
[    2.219691] dracut: + read line
[    2.220364] dracut: + [ / = /sysroot ]
[    2.220420] dracut: + read dev mp rest
[    2.220478] dracut: + [ /proc = /sysroot ]
[    2.220517] dracut: + read dev mp rest
[    2.220570] dracut: + [ /sys = /sysroot ]
[    2.220608] dracut: + read dev mp rest
[    2.220666] dracut: + [ /dev = /sysroot ]
[    2.220704] dracut: + read dev mp rest
[    2.220760] dracut: + [ /dev/pts = /sysroot ]
[    2.220799] dracut: + read dev mp rest
[    2.220853] dracut: + [ /dev/shm = /sysroot ]
[    2.220891] dracut: + read dev mp rest
[    2.220943] dracut: + [ /run = /sysroot ]
[    2.220981] dracut: + read dev mp rest
[    2.221032] dracut: + [ /sysroot = /sysroot ]
[    2.221065] dracut: + echo /dev/sda3
[    2.221128] dracut: + + read devinfo mp Mounted rest root
[    2.221225] dracut: filesystem /dev/sda3
[    2.221262] dracut: + check_quiet
[    2.221311] dracut: + [ -z yes ]
[    2.221370] dracut: + echo <30>dracut: Mounted root filesystem /dev/sda3
[    2.221380] dracut: Mounted root filesystem /dev/sda3
[    2.221425] dracut: + [ yes != yes ]
[    2.221456] dracut: + read line
[    2.221821] dracut: + getarg rd.break=pre-pivot rdbreak=pre-pivot
[    2.221836] dracut: + set +x
[    2.221849] dracut: + return 1
[    2.221864] dracut: + source_hook pre-pivot
[    2.221883] dracut: + source_all /lib/dracut/hooks/pre-pivot
[    2.221896] dracut: + local f
[    2.221925] dracut: + [ /lib/dracut/hooks/pre-pivot ]
[    2.221946] dracut: + [ -d //lib/dracut/hooks/pre-pivot ]
[    2.221971] dracut: + [ -e //lib/dracut/hooks/pre-pivot/50mount-usr.sh ]
[    2.221993] dracut: + . //lib/dracut/hooks/pre-pivot/50mount-usr.sh
[    2.222006] dracut: + type info
[    2.222021] dracut: + type fsck_single
[    2.222038] dracut: + [ -f /sysroot/etc/fstab ]
[    2.222343] dracut: + mount_usr
[    2.222368] dracut: + local _dev _mp _fs _opts _rest _usr_found _ret _freq _passno
[    2.222390] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223565] dracut: + [  != # ]
[    2.223580] dracut: + continue
[    2.223600] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223614] dracut: + [  != # ]
[    2.223628] dracut: + continue
[    2.223646] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223661] dracut: + [  != # ]
[    2.223674] dracut: + continue
[    2.223696] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223711] dracut: + [  != # ]
[    2.223723] dracut: + continue
[    2.223742] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223756] dracut: + [  != # ]
[    2.223769] dracut: + continue
[    2.223787] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223801] dracut: + [  != # ]
[    2.223815] dracut: + continue
[    2.223833] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223848] dracut: + [  != # ]
[    2.223860] dracut: + continue
[    2.223881] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223895] dracut: + [  != # ]
[    2.223907] dracut: + continue
[    2.223926] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223939] dracut: + [  != # ]
[    2.223952] dracut: + continue
[    2.223970] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.223985] dracut: + [  != # ]
[    2.223998] dracut: + continue
[    2.224016] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224030] dracut: + [  != # ]
[    2.224043] dracut: + continue
[    2.224061] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224075] dracut: + [  != # ]
[    2.224088] dracut: + continue
[    2.224107] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224120] dracut: + [  !=  ]
[    2.224135] dracut: + [  = /usr ]
[    2.224154] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224168] dracut: + [  != # ]
[    2.224181] dracut: + continue
[    2.224199] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224213] dracut: + [  !=  ]
[    2.224227] dracut: + [  = /usr ]
[    2.224246] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224260] dracut: + [  != # ]
[    2.224272] dracut: + continue
[    2.224291] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224309] dracut: + [ LABEL=boot != LABEL=boot ]
[    2.224325] dracut: + [ /boot = /usr ]
[    2.224344] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224362] dracut: + [ LABEL=root != LABEL=root ]
[    2.224377] dracut: + [ / = /usr ]
[    2.224396] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224422] dracut: + [ LABEL=swap != LABEL=swap ]
[    2.224440] dracut: + [ none = /usr ]
[    2.224463] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224481] dracut: + [ LABEL=var != LABEL=var ]
[    2.224496] dracut: + [ /var = /usr ]
[    2.224515] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224541] dracut: + [ LABEL=portage != LABEL=portage ]
[    2.224559] dracut: + [ /usr/portage = /usr ]
[    2.224578] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224596] dracut: + [ LABEL=home != LABEL=home ]
[    2.224612] dracut: + [ /home = /usr ]
[    2.224632] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224650] dracut: + [ LABEL=data != LABEL=data ]
[    2.224666] dracut: + [ /data = /usr ]
[    2.224685] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224701] dracut: + [  != #/dev/sdb5 ]
[    2.224714] dracut: + continue
[    2.224732] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224748] dracut: + [ tmpfs != tmpfs ]
[    2.224766] dracut: + [ /var/tmp/portage = /usr ]
[    2.224786] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224799] dracut: + [  !=  ]
[    2.224814] dracut: + [  = /usr ]
[    2.224833] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224846] dracut: + [  !=  ]
[    2.224860] dracut: + [  = /usr ]
[    2.224879] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224892] dracut: + [  !=  ]
[    2.224906] dracut: + [  = /usr ]
[    2.224925] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224941] dracut: + [  != #/dev/cdrom ]
[    2.224954] dracut: + continue
[    2.224972] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.224988] dracut: + [  != #/dev/fd0 ]
[    2.225001] dracut: + continue
[    2.225019] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.225033] dracut: + [  !=  ]
[    2.225047] dracut: + [  = /usr ]
[    2.225066] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.225080] dracut: + [  != # ]
[    2.225092] dracut: + continue
[    2.225111] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.225124] dracut: + [  != # ]
[    2.225137] dracut: + continue
[    2.225156] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.225171] dracut: + [  != # ]
[    2.225184] dracut: + continue
[    2.225203] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.225216] dracut: + [  != # ]
[    2.225229] dracut: + continue
[    2.225248] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.225263] dracut: + [ shm != shm ]
[    2.225279] dracut: + [ /dev/shm = /usr ]
[    2.225298] dracut: + read _dev _mp _fs _opts _freq _passno
[    2.225312] dracut: + [ x != x ]
[    2.225328] dracut: + getarg real_init=
[    2.225340] dracut: + set +x
[    2.225352] dracut: + return 1
[    2.225365] dracut: + getarg init=
[    2.225377] dracut: + set +x
[    2.225389] dracut: + return 0
[    2.225408] dracut: + getargs rd.distroinit=
[    2.225421] dracut: + set +x
[    2.225433] dracut: + return 1
[    2.225446] dracut: + [ -n  ]
[    2.225458] dracut: + continue
[    2.225474] dracut: + [ -n /sbin/init ]
[    2.225492] dracut: + readlink -f /sysroot//sbin/init
[    2.239500] readlink used greatest stack depth: 4456 bytes left
[    2.240061] dracut: + __p=/sysroot/sbin/init
[    2.240082] dracut: + [ -x /sysroot/sbin/init ]
[    2.240098] dracut: + INIT=/sbin/init
[    2.240110] dracut: + break
[    2.240125] dracut: + [ /sbin/init ]
[    2.240140] dracut: + [ 171 -lt 168 ]
[    2.240156] dracut: + udevadm control --exit
[    2.273404] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    2.278233] dracut: + udevadm info --cleanup-db
[    2.278765] dracut: + export RD_TIMESTAMP
[    2.278779] dracut: + set +x
[    2.279797] dracut: + return 0
[    2.279813] dracut: + set +x
[    2.279854] dracut: + [ -d /sysroot/run ]
[    2.279871] dracut: + NEWRUN=/dev/.initramfs
[    2.279889] dracut: + mkdir -m 0755 /dev/.initramfs
[    2.280351] dracut: + mount --bind /run/initramfs /dev/.initramfs
[    2.281018] dracut: + wait_for_loginit
[    2.281036] dracut: + set +x
[    2.395576] dracut: Switching root
[    3.260727] cat used greatest stack depth: 4088 bytes left
[    3.358754] setfont used greatest stack depth: 3968 bytes left
[    3.430827] init-early.sh used greatest stack depth: 3696 bytes left
[    4.321813] udevd[1633]: starting version 171
[    5.597284] nvidia: module license 'NVIDIA' taints kernel.
[    5.597288] Disabling lock debugging due to kernel taint
[    5.721665] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.721672] nvidia 0000:01:00.0: setting latency timer to 64
[    5.721677] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.721789] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  295.20  Mon Feb  6 21:07:30 PST 2012
[    7.586645] reiserfs: enabling write barrier flush mode
[    7.798411] kjournald starting.  Commit interval 5 seconds
[    7.798604] EXT3-fs (sda8): using internal journal
[    7.798609] EXT3-fs (sda8): mounted filesystem with writeback data mode
[    7.827256] kjournald starting.  Commit interval 5 seconds
[    7.827445] EXT3-fs (sda6): using internal journal
[    7.827448] EXT3-fs (sda6): mounted filesystem with writeback data mode
[    7.827993] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
[    7.828000] REISERFS (device sda7): using ordered data mode
[    7.828002] reiserfs: using flush barriers
[    7.828173] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    7.828589] REISERFS (device sda7): checking transaction log (sda7)
[    7.932280] REISERFS (device sda7): Using r5 hash to sort names
[    9.286024] r8169 0000:03:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2)
[    9.293305] r8169 0000:03:00.0: eth0: link down
[    9.293324] r8169 0000:03:00.0: eth0: link down
[    9.295715] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.435227] Adding 979960k swap on /dev/sda2.  Priority:-1 extents:1 across:979960k 
[    9.840640] chronyd used greatest stack depth: 3576 bytes left
[   10.917107] r8169 0000:03:00.0: eth0: link up
[   10.919510] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.438070] eth0: no IPv6 routers present
Replies:
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Canek Peláez Valdés
References:
Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Alan Mackenzie
Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- che
RE: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Mike Edenfield
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Alan Mackenzie
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Alan McKinnon
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Alan Mackenzie
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Alan McKinnon
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Alan Mackenzie
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Neil Bothwick
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Alan Mackenzie
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Dale
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Canek Peláez Valdés
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Dale
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Canek Peláez Valdés
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Dale
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Canek Peláez Valdés
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Dale
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Neil Bothwick
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Dale
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Canek Peláez Valdés
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Dale
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Canek Peláez Valdés
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
-- Dale
Navigation:
Lists: gentoo-user: < Prev By Thread Next > < Prev By Date Next >
Previous by thread:
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
Next by thread:
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?
Previous by date:
Re: trouble understanding a slot conflict
Next by date:
Re: Re: After /usr conflation: why not copy booting software to /sbin rather than initramfs?


Updated May 04, 2012

Summary: Archive of the gentoo-user mailing list.

Donate to support our development efforts.

Copyright 2001-2013 Gentoo Foundation, Inc. Questions, Comments? Contact us.