root@fireball / # dmesg
[ 0.000000] Linux version 3.2.11-gentoo (root@fireball) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #2 SMP PREEMPT Mon Apr 2 20:15:29 CDT 2012
[ 0.000000] Command line: root=/dev/sda3 init=/sbin/init rd.debug rd.udev.debug nox
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
[ 0.000000] BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfc91000 (usable)
[ 0.000000] BIOS-e820: 00000000bfcf0000 - 00000000bfcf3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfcf3000 - 00000000bfd00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfd00000 - 00000000bfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770T-USB3/GA-770T-USB3, BIOS F4 08/26/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFD00000 mask FFFFFFF00000 uncachable
[ 0.000000] 3 base 0000BFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 5 base 000200000000 mask FFFE00000000 write-back
[ 0.000000] 6 base 000400000000 mask FFFFC0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000440000000 aka 17408M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bfd00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfc91 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f41e0] f41e0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 8192
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfc91000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfc00000 page 2M
[ 0.000000] 00bfc00000 - 00bfc91000 page 4k
[ 0.000000] kernel direct mapping tables up to bfc91000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000
[ 0.000000] 0100000000 - 0440000000 page 1G
[ 0.000000] kernel direct mapping tables up to 440000000 @ bfc90000-bfc91000
[ 0.000000] RAMDISK: 37c79000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f5c10 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000bfcf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000bfcf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000bfcf30c0 073E2 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfcf0000 00040
[ 0.000000] ACPI: SSDT 00000000bfcfa580 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000bfcfae40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000bfcfae80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000bfcfa4c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000440000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000440000000
[ 0.000000] NODE_DATA [000000043fffb000 - 000000043fffffff]
[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042f600000-ffff88043d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00440000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000098
[ 0.000000] 0: 0x00000100 -> 0x000bfc91
[ 0.000000] 0: 0x00100000 -> 0x00440000
[ 0.000000] On node 0 totalpages: 4193305
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767177 pages, LIFO batch:31
[ 0.000000] Normal zone: 46592 pages used for memmap
[ 0.000000] Normal zone: 3361280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:20200000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88043fc00000 s75584 r8192 d22720 u262144
[ 0.000000] pcpu-alloc: s75584 r8192 d22720 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4132375
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 init=/sbin/init rd.debug rd.udev.debug nox
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] Memory: 16388988k/17825792k available (6268k kernel code, 1052572k absent, 384232k reserved, 6642k data, 4852k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3218.035 MHz processor.
[ 0.003002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6436.07 BogoMIPS (lpj=3218035)
[ 0.003606] pid_max: default: 32768 minimum: 301
[ 0.004046] Security Framework initialized
[ 0.005219] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009786] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012213] Mount-cache hash table entries: 256
[ 0.012628] tseg: 00bfe00000
[ 0.012630] CPU: Physical Processor ID: 0
[ 0.012928] CPU: Processor Core ID: 0
[ 0.013001] mce: CPU supports 6 MCE banks
[ 0.013307] using AMD E400 aware idle routine
[ 0.013637] ACPI: Core revision 20110623
[ 0.018497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028812] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 03
[ 0.029997] Performance Events: AMD PMU driver.
[ 0.029997] ... version: 0
[ 0.029997] ... bit width: 48
[ 0.029997] ... generic registers: 4
[ 0.029999] ... value mask: 0000ffffffffffff
[ 0.030303] ... max period: 00007fffffffffff
[ 0.030603] ... fixed-purpose events: 0
[ 0.030998] ... event mask: 000000000000000f
[ 0.031324] System has AMD C1E enabled
[ 0.031634] Switch to broadcast mode on CPU0
[ 0.039088] MCE: In-kernel MCE decoding enabled.
[ 0.045025] Booting Node 0, Processors #1
[ 0.045122] smpboot cpu 1: start_ip = 96000
[ 0.116996] Switch to broadcast mode on CPU1
[ 0.121025] #2
[ 0.121073] smpboot cpu 2: start_ip = 96000
[ 0.192991] Switch to broadcast mode on CPU2
[ 0.197020] #3
[ 0.197068] smpboot cpu 3: start_ip = 96000
[ 0.268984] Switch to broadcast mode on CPU3
[ 0.268993] Brought up 4 CPUs
[ 0.268995] Total of 4 processors activated (25743.75 BogoMIPS).
[ 0.271156] devtmpfs: initialized
[ 0.271677] NET: Registered protocol family 16
[ 0.272014] kworker/u:0 used greatest stack depth: 6080 bytes left
[ 0.272072] kworker/u:0 used greatest stack depth: 5680 bytes left
[ 0.272732] node 0 link 0: io port [b000, ffff]
[ 0.272734] TOM: 00000000c0000000 aka 3072M
[ 0.272970] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.272973] node 0 link 0: mmio [a0000, bffff]
[ 0.272975] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.272978] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.272980] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[ 0.272983] TOM2: 0000000440000000 aka 17408M
[ 0.273281] bus: [00, 04] on node 0 link 0
[ 0.273283] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.273284] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.273286] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[ 0.273287] bus: 00 index 3 [mem 0xe0500000-0xffffffff]
[ 0.273289] bus: 00 index 4 [mem 0xe0100000-0xe04fffff]
[ 0.273290] bus: 00 index 5 [mem 0x440000000-0xfcffffffff]
[ 0.273300] Extended Config Space enabled on 1 nodes
[ 0.273642] ACPI: bus type pci registered
[ 0.274061] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.274618] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.296727] PCI: Using configuration type 1 for base access
[ 0.302987] bio: create slab <bio-0> at 0
[ 0.303384] ACPI: Added _OSI(Module Device)
[ 0.303682] ACPI: Added _OSI(Processor Device)
[ 0.303965] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.304267] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.305315] ACPI: EC: Look up EC in DSDT
[ 0.310187] ACPI: Interpreter enabled
[ 0.310964] ACPI: (supports S0 S5)
[ 0.311362] ACPI: Using IOAPIC for interrupt routing
[ 0.354914] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.355001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.355421] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.355957] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.356259] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.356956] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.357506] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff]
[ 0.357966] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.357978] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.358012] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.358043] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.358046] pci 0000:00:02.0: PME# disabled
[ 0.358065] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[ 0.358094] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.358096] pci 0000:00:09.0: PME# disabled
[ 0.358108] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.358137] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.358139] pci 0000:00:0a.0: PME# disabled
[ 0.358164] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.358182] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.358192] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.358201] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.358210] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.358219] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.358228] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.358284] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.358297] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.358360] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.358373] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.358441] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.358460] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.358540] pci 0000:00:12.2: supports D1 D2
[ 0.358542] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.358546] pci 0000:00:12.2: PME# disabled
[ 0.358566] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.358579] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.358642] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.358655] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.358989] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.359008] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.359088] pci 0000:00:13.2: supports D1 D2
[ 0.359090] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.359093] pci 0000:00:13.2: PME# disabled
[ 0.359117] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.359214] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.359230] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.359239] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.359248] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.359257] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.359266] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.359323] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.359343] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.359408] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.359412] pci 0000:00:14.2: PME# disabled
[ 0.359424] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.359498] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.359539] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.359551] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.359617] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.359633] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.359646] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.359659] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.359674] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.359722] pci 0000:01:00.0: [10de:0a20] type 0 class 0x000300
[ 0.359731] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.359741] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.359751] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.359758] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.359764] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.359818] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403
[ 0.359827] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
[ 0.360974] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.361280] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.361283] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.361286] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.361325] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 0.361340] pci 0000:02:00.0: reg 10: [mem 0xfdafe000-0xfdafffff 64bit]
[ 0.361412] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.361415] pci 0000:02:00.0: PME# disabled
[ 0.362971] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.363277] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.363280] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.363283] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.363322] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.363335] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 0.363354] pci 0000:03:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref]
[ 0.363367] pci 0000:03:00.0: reg 20: [mem 0xfddf8000-0xfddfbfff 64bit pref]
[ 0.363376] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.363423] pci 0000:03:00.0: supports D1 D2
[ 0.363425] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.363428] pci 0000:03:00.0: PME# disabled
[ 0.364972] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.365274] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.365277] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.365280] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.365330] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.365353] pci 0000:04:0e.0: reg 10: [mem 0xfdcff000-0xfdcff7ff]
[ 0.365365] pci 0000:04:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff]
[ 0.365457] pci 0000:04:0e.0: supports D1 D2
[ 0.365458] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.365463] pci 0000:04:0e.0: PME# disabled
[ 0.365497] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.365804] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.365808] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.365812] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 0.365815] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.365817] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.365819] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.365821] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.365823] pci 0000:00:14.4: bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[ 0.365838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.366102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.366157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.366193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.366218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.366246] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.366550] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.366954] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.379528] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.380576] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.381668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.382752] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.383841] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.384980] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.386276] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.387279] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.388678] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.388953] vgaarb: loaded
[ 0.389251] vgaarb: bridge control possible 0000:01:00.0
[ 0.390068] SCSI subsystem initialized
[ 0.390458] libata version 3.00 loaded.
[ 0.390523] usbcore: registered new interface driver usbfs
[ 0.390857] usbcore: registered new interface driver hub
[ 0.390987] usbcore: registered new device driver usb
[ 0.391443] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.391951] PCI: Using ACPI for IRQ routing
[ 0.400733] PCI: pci_cache_line_size set to 64 bytes
[ 0.400740] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.401021] reserve RAM buffer: 0000000000098400 - 000000000009ffff
[ 0.401024] reserve RAM buffer: 00000000bfc91000 - 00000000bfffffff
[ 0.401264] cfg80211: Calling CRDA to update world regulatory domain
[ 0.402047] NetLabel: Initializing
[ 0.402350] NetLabel: domain hash size = 128
[ 0.402650] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.402957] NetLabel: unlabeled traffic allowed by default
[ 0.403262] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.403791] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.405981] Switching to clocksource hpet
[ 0.413267] pnp: PnP ACPI init
[ 0.413581] ACPI: bus type pnp registered
[ 0.413942] pnp 00:00: [bus 00-ff]
[ 0.413944] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.413946] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.413948] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.413950] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.413952] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.413954] pnp 00:00: [mem 0xbff00000-0xfebfffff window]
[ 0.414040] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.414049] pnp 00:01: [io 0x0010-0x001f]
[ 0.414051] pnp 00:01: [io 0x0022-0x003f]
[ 0.414053] pnp 00:01: [io 0x0044-0x005f]
[ 0.414054] pnp 00:01: [io 0x0062-0x0063]
[ 0.414056] pnp 00:01: [io 0x0065-0x006f]
[ 0.414057] pnp 00:01: [io 0x0074-0x007f]
[ 0.414060] pnp 00:01: [io 0x0091-0x0093]
[ 0.414062] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.414063] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.414065] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.414066] pnp 00:01: [io 0x0220-0x0225]
[ 0.414068] pnp 00:01: [io 0x0290-0x0294]
[ 0.414132] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.414442] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.414745] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.415047] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432521] pnp 00:02: [io 0x4100-0x411f]
[ 0.432524] pnp 00:02: [io 0x0228-0x022f]
[ 0.432526] pnp 00:02: [io 0x040b]
[ 0.432527] pnp 00:02: [io 0x04d6]
[ 0.432529] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.432530] pnp 00:02: [io 0x0c14]
[ 0.432532] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.432533] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.432535] pnp 00:02: [io 0x0c6f]
[ 0.432536] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.432538] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.432539] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.432541] pnp 00:02: [io 0x4000-0x40fe]
[ 0.432542] pnp 00:02: [io 0x4210-0x4217]
[ 0.432544] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.432545] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.432547] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.432548] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.432550] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.432555] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.433144] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.433715] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.434357] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.434668] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.434970] system 00:02: [io 0x040b] has been reserved
[ 0.435275] system 00:02: [io 0x04d6] has been reserved
[ 0.435582] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.435889] system 00:02: [io 0x0c14] has been reserved
[ 0.436191] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.436503] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.436802] system 00:02: [io 0x0c6f] has been reserved
[ 0.437103] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.437405] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.437716] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.438020] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.438323] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.438633] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.438937] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.439238] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.439552] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.440107] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440190] pnp 00:03: [dma 4]
[ 0.440192] pnp 00:03: [io 0x0000-0x000f]
[ 0.440193] pnp 00:03: [io 0x0080-0x0090]
[ 0.440195] pnp 00:03: [io 0x0094-0x009f]
[ 0.440197] pnp 00:03: [io 0x00c0-0x00df]
[ 0.440274] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.440300] pnp 00:04: [irq 0 disabled]
[ 0.440311] pnp 00:04: [irq 8]
[ 0.440313] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.440358] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.440379] pnp 00:05: [io 0x0070-0x0073]
[ 0.440433] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.440440] pnp 00:06: [io 0x0061]
[ 0.440483] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.440491] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.440498] pnp 00:07: [irq 13]
[ 0.440541] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440661] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.440662] pnp 00:08: [io 0x03f7]
[ 0.440669] pnp 00:08: [irq 6]
[ 0.440671] pnp 00:08: [dma 2]
[ 0.440727] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.440866] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.440873] pnp 00:09: [irq 4]
[ 0.440936] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.441084] pnp 00:0a: [io 0x0378-0x037f]
[ 0.441091] pnp 00:0a: [irq 7]
[ 0.441153] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.441234] pnp 00:0b: [irq 12]
[ 0.441282] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.441298] pnp 00:0c: [io 0x0060]
[ 0.441300] pnp 00:0c: [io 0x0064]
[ 0.441307] pnp 00:0c: [irq 1]
[ 0.441354] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.441377] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.441453] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.441757] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441866] pnp 00:0e: [mem 0x000d4400-0x000d7fff]
[ 0.441868] pnp 00:0e: [mem 0x000f0000-0x000f7fff]
[ 0.441869] pnp 00:0e: [mem 0x000f8000-0x000fbfff]
[ 0.441871] pnp 00:0e: [mem 0x000fc000-0x000fffff]
[ 0.441873] pnp 00:0e: [mem 0xbfcf0000-0xbfcfffff]
[ 0.441874] pnp 00:0e: [mem 0xffff0000-0xffffffff]
[ 0.441876] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.441878] pnp 00:0e: [mem 0x00100000-0xbfceffff]
[ 0.441879] pnp 00:0e: [mem 0xbfd00000-0xbfdfffff]
[ 0.441881] pnp 00:0e: [mem 0xbfe00000-0xbfefffff]
[ 0.441883] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[ 0.441885] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[ 0.441886] pnp 00:0e: [mem 0xfff80000-0xfffeffff]
[ 0.441890] pnp 00:0e: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.442459] pnp 00:0e: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.443018] pnp 00:0e: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.443586] pnp 00:0e: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.444144] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.444715] pnp 00:0e: disabling [mem 0x00100000-0xbfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.445378] system 00:0e: [mem 0xbfcf0000-0xbfcfffff] could not be reserved
[ 0.445692] system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.445993] system 00:0e: [mem 0xbfd00000-0xbfdfffff] has been reserved
[ 0.446300] system 00:0e: [mem 0xbfe00000-0xbfefffff] could not be reserved
[ 0.446610] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.446917] system 00:0e: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.447220] system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.447532] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.447549] pnp: PnP ACPI: found 15 devices
[ 0.447847] ACPI: ACPI bus type pnp unregistered
[ 0.452778] PCI: max bus depth: 1 pci_try_num: 2
[ 0.452795] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd007ffff pref]
[ 0.453352] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.453665] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.453969] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.454273] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.454836] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.455135] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.455446] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.455749] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.456309] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.456872] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.457172] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.457484] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.457787] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.458348] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.458659] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.458964] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.459268] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 0.459845] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.460150] pci 0000:00:02.0: setting latency timer to 64
[ 0.460159] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.460470] pci 0000:00:09.0: setting latency timer to 64
[ 0.460474] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.460781] pci 0000:00:0a.0: setting latency timer to 64
[ 0.460787] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.460789] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.460791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.460793] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.460794] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.460796] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.460798] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.460800] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.460802] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.460804] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.460806] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.460808] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.460809] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.460811] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.460813] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.460815] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.460817] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[ 0.460819] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.460820] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.460822] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.460824] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.460826] pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.460888] NET: Registered protocol family 2
[ 0.461455] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.463414] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.465929] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.466490] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.466791] TCP reno registered
[ 0.467105] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.467503] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.467992] NET: Registered protocol family 1
[ 0.468411] RPC: Registered named UNIX socket transport module.
[ 0.468716] RPC: Registered udp transport module.
[ 0.469017] RPC: Registered tcp transport module.
[ 0.469321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.469663] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.532478] pci 0000:00:12.0: PCI INT A disabled
[ 0.532793] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.595479] pci 0000:00:12.1: PCI INT A disabled
[ 0.595798] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.596147] pci 0000:00:12.2: PCI INT B disabled
[ 0.596463] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.659477] pci 0000:00:13.0: PCI INT A disabled
[ 0.659793] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.722477] pci 0000:00:13.1: PCI INT A disabled
[ 0.722806] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.723149] pci 0000:00:13.2: PCI INT B disabled
[ 0.723476] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.786476] pci 0000:00:14.5: PCI INT C disabled
[ 0.786809] pci 0000:01:00.0: Boot video device
[ 0.786826] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.787168] pci 0000:02:00.0: PCI INT A disabled
[ 0.787486] PCI: CLS 64 bytes, default 64
[ 0.789791] Trying to unpack rootfs image as initramfs...
[ 0.844104] Freeing initrd memory: 3548k freed
[ 0.846003] PCI-DMA: Disabling AGP.
[ 0.849681] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.849985] PCI-DMA: using GART IOMMU.
[ 0.850285] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.854912] IBS: LVT offset 1 assigned
[ 0.855234] perf: AMD IBS detected (0x0000001f)
[ 0.856168] audit: initializing netlink socket (disabled)
[ 0.856490] type=2000 audit(1333523078.855:1): initialized
[ 0.887090] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.887942] NTFS driver 2.1.30 [Flags: R/W].
[ 0.888390] fuse init (API version 7.17)
[ 0.888794] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.890339] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.891381] Btrfs loaded
[ 0.891690] msgmni has been set to 32145
[ 0.892301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.892864] io scheduler noop registered
[ 0.893165] io scheduler deadline registered
[ 0.893497] io scheduler cfq registered (default)
[ 0.893930] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.893956] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.894037] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.894057] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 0.894131] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.894150] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 0.894361] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.158591] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.179831] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.180520] Non-volatile memory driver v1.3
[ 1.180919] ppdev: user-space parallel port driver
[ 1.181224] Linux agpgart interface v0.103
[ 1.181651] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.182210] ACPI: Power Button [PWRB]
[ 1.182602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.183155] ACPI: Power Button [PWRF]
[ 1.183561] ACPI: processor limited to max C-state 1
[ 1.200227] [drm] Initialized drm 1.1.0 20060810
[ 1.200602] parport_pc 00:0a: reported by Plug and Play ACPI
[ 1.200925] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[ 1.203419] brd: module loaded
[ 1.204600] loop: module loaded
[ 1.205160] ahci 0000:00:11.0: version 3.0
[ 1.205180] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.205603] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.212659] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 1.214169] scsi0 : ahci
[ 1.214599] scsi1 : ahci
[ 1.214984] scsi2 : ahci
[ 1.215366] scsi3 : ahci
[ 1.215761] scsi4 : ahci
[ 1.216142] scsi5 : ahci
[ 1.216601] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.217157] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.217725] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.218278] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.218842] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 1.219412] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 1.220019] work_for_cpu used greatest stack depth: 5600 bytes left
[ 1.220631] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.220950] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.221266] r8169 0000:03:00.0: setting latency timer to 64
[ 1.221303] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.221588] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9000181e000, 1c:6f:65:4c:91:c7, XID 083000c0 IRQ 43
[ 1.222155] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.222776] PPP generic driver version 2.4.2
[ 1.223330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.223645] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 1.223675] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.223988] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.224300] drivers/usb/core/inode.c: creating file 'devices'
[ 1.224303] drivers/usb/core/inode.c: creating file '001'
[ 1.224419] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.224984] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
[ 1.224988] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[ 1.224992] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.225581] ehci_hcd 0000:00:12.2: debug port 1
[ 1.225884] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.225892] ehci_hcd 0000:00:12.2: MWI active
[ 1.225894] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 1.225912] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.226217] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.226223] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.231453] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.231780] usb usb1: default language 0x0409
[ 1.231785] usb usb1: udev 1, busnum 1, minor = 0
[ 1.231787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.232091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.232657] usb usb1: Product: EHCI Host Controller
[ 1.232962] usb usb1: Manufacturer: Linux 3.2.11-gentoo ehci_hcd
[ 1.233266] usb usb1: SerialNumber: 0000:00:12.2
[ 1.233679] usb usb1: usb_probe_device
[ 1.233681] usb usb1: configuration #1 chosen from 1 choice
[ 1.233687] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.233725] hub 1-0:1.0: usb_probe_interface
[ 1.233727] hub 1-0:1.0: usb_probe_interface - got id
[ 1.233728] hub 1-0:1.0: USB hub found
[ 1.234027] hub 1-0:1.0: 6 ports detected
[ 1.234327] hub 1-0:1.0: standalone hub
[ 1.234328] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.234329] hub 1-0:1.0: individual port over-current protection
[ 1.234331] hub 1-0:1.0: power on to power good time: 20ms
[ 1.234334] hub 1-0:1.0: local power source is good
[ 1.234336] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.234362] drivers/usb/core/inode.c: creating file '001'
[ 1.234401] work_for_cpu used greatest stack depth: 5384 bytes left
[ 1.234726] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.235045] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.235351] drivers/usb/core/inode.c: creating file '002'
[ 1.235442] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.236001] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
[ 1.236005] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[ 1.236009] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.236592] ehci_hcd 0000:00:13.2: debug port 1
[ 1.236897] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.236905] ehci_hcd 0000:00:13.2: MWI active
[ 1.236907] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 1.236924] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.237226] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.237232] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.242449] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.242772] usb usb2: default language 0x0409
[ 1.242777] usb usb2: udev 1, busnum 2, minor = 128
[ 1.242779] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.243082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.243650] usb usb2: Product: EHCI Host Controller
[ 1.243952] usb usb2: Manufacturer: Linux 3.2.11-gentoo ehci_hcd
[ 1.244252] usb usb2: SerialNumber: 0000:00:13.2
[ 1.244650] usb usb2: usb_probe_device
[ 1.244652] usb usb2: configuration #1 chosen from 1 choice
[ 1.244657] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.244694] hub 2-0:1.0: usb_probe_interface
[ 1.244696] hub 2-0:1.0: usb_probe_interface - got id
[ 1.244697] hub 2-0:1.0: USB hub found
[ 1.244998] hub 2-0:1.0: 6 ports detected
[ 1.245299] hub 2-0:1.0: standalone hub
[ 1.245300] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.245302] hub 2-0:1.0: individual port over-current protection
[ 1.245304] hub 2-0:1.0: power on to power good time: 20ms
[ 1.245307] hub 2-0:1.0: local power source is good
[ 1.245308] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.245334] drivers/usb/core/inode.c: creating file '001'
[ 1.245426] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.245726] ohci_hcd: block sizes: ed 80 td 96
[ 1.245761] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.246078] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.246384] drivers/usb/core/inode.c: creating file '003'
[ 1.246473] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.247039] ohci_hcd 0000:00:12.0: created debug files
[ 1.247041] ohci_hcd 0000:00:12.0: supports USB remote wakeup
[ 1.247060] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.301462] ohci_hcd 0000:00:12.0: OHCI controller state
[ 1.301466] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
[ 1.301470] ohci_hcd 0000:00:12.0: control 0x083 HCFS=operational CBSR=3
[ 1.301473] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
[ 1.301477] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
[ 1.301480] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.301489] ohci_hcd 0000:00:12.0: hcca frame #0005
[ 1.301493] ohci_hcd 0000:00:12.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[ 1.301496] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.301499] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
[ 1.301503] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
[ 1.301506] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
[ 1.301509] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
[ 1.301520] usb usb3: default language 0x0409
[ 1.301524] usb usb3: udev 1, busnum 3, minor = 256
[ 1.301526] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.301827] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.302384] usb usb3: Product: OHCI Host Controller
[ 1.302690] usb usb3: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[ 1.302991] usb usb3: SerialNumber: 0000:00:12.0
[ 1.303417] usb usb3: usb_probe_device
[ 1.303419] usb usb3: configuration #1 chosen from 1 choice
[ 1.303424] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.303460] hub 3-0:1.0: usb_probe_interface
[ 1.303462] hub 3-0:1.0: usb_probe_interface - got id
[ 1.303463] hub 3-0:1.0: USB hub found
[ 1.303764] hub 3-0:1.0: 3 ports detected
[ 1.304063] hub 3-0:1.0: standalone hub
[ 1.304065] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.304066] hub 3-0:1.0: global over-current protection
[ 1.304067] hub 3-0:1.0: power on to power good time: 4ms
[ 1.304072] hub 3-0:1.0: local power source is good
[ 1.304073] hub 3-0:1.0: no over-current condition exists
[ 1.304075] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.304086] drivers/usb/core/inode.c: creating file '001'
[ 1.304144] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.304466] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.304773] drivers/usb/core/inode.c: creating file '004'
[ 1.304847] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.305424] ohci_hcd 0000:00:12.1: created debug files
[ 1.305425] ohci_hcd 0000:00:12.1: supports USB remote wakeup
[ 1.305430] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.333467] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.344466] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.360459] ohci_hcd 0000:00:12.1: OHCI controller state
[ 1.360463] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers
[ 1.360467] ohci_hcd 0000:00:12.1: control 0x083 HCFS=operational CBSR=3
[ 1.360470] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0
[ 1.360473] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF
[ 1.360477] ohci_hcd 0000:00:12.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.360486] ohci_hcd 0000:00:12.1: hcca frame #0005
[ 1.360489] ohci_hcd 0000:00:12.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[ 1.360492] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.360495] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE
[ 1.360499] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS
[ 1.360502] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS
[ 1.360505] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS
[ 1.360514] usb usb4: default language 0x0409
[ 1.360518] usb usb4: udev 1, busnum 4, minor = 384
[ 1.360520] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.360822] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.361378] usb usb4: Product: OHCI Host Controller
[ 1.361687] usb usb4: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[ 1.361988] usb usb4: SerialNumber: 0000:00:12.1
[ 1.362416] usb usb4: usb_probe_device
[ 1.362418] usb usb4: configuration #1 chosen from 1 choice
[ 1.362423] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.362459] hub 4-0:1.0: usb_probe_interface
[ 1.362461] hub 4-0:1.0: usb_probe_interface - got id
[ 1.362462] hub 4-0:1.0: USB hub found
[ 1.362766] hub 4-0:1.0: 3 ports detected
[ 1.363064] hub 4-0:1.0: standalone hub
[ 1.363065] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.363067] hub 4-0:1.0: global over-current protection
[ 1.363068] hub 4-0:1.0: power on to power good time: 4ms
[ 1.363073] hub 4-0:1.0: local power source is good
[ 1.363074] hub 4-0:1.0: no over-current condition exists
[ 1.363076] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.363087] drivers/usb/core/inode.c: creating file '001'
[ 1.363146] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.363471] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.363771] drivers/usb/core/inode.c: creating file '005'
[ 1.363847] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.364423] ohci_hcd 0000:00:13.0: created debug files
[ 1.364424] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 1.364443] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.403460] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 1.419459] ohci_hcd 0000:00:13.0: OHCI controller state
[ 1.419463] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 1.419466] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
[ 1.419470] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 1.419473] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 1.419476] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.419485] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 1.419488] ohci_hcd 0000:00:13.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[ 1.419492] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.419495] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 1.419498] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[ 1.419501] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[ 1.419505] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[ 1.419515] usb usb5: default language 0x0409
[ 1.419520] usb usb5: udev 1, busnum 5, minor = 512
[ 1.419522] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.419827] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.420381] usb usb5: Product: OHCI Host Controller
[ 1.420686] usb usb5: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[ 1.420989] usb usb5: SerialNumber: 0000:00:13.0
[ 1.421412] usb usb5: usb_probe_device
[ 1.421414] usb usb5: configuration #1 chosen from 1 choice
[ 1.421418] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.421454] hub 5-0:1.0: usb_probe_interface
[ 1.421456] hub 5-0:1.0: usb_probe_interface - got id
[ 1.421457] hub 5-0:1.0: USB hub found
[ 1.421767] hub 5-0:1.0: 3 ports detected
[ 1.422065] hub 5-0:1.0: standalone hub
[ 1.422066] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.422068] hub 5-0:1.0: global over-current protection
[ 1.422069] hub 5-0:1.0: power on to power good time: 4ms
[ 1.422074] hub 5-0:1.0: local power source is good
[ 1.422075] hub 5-0:1.0: no over-current condition exists
[ 1.422077] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.422087] drivers/usb/core/inode.c: creating file '001'
[ 1.422147] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.422474] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.422776] drivers/usb/core/inode.c: creating file '006'
[ 1.422854] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.423433] ohci_hcd 0000:00:13.1: created debug files
[ 1.423434] ohci_hcd 0000:00:13.1: supports USB remote wakeup
[ 1.423439] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.462460] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 1.478458] ohci_hcd 0000:00:13.1: OHCI controller state
[ 1.478462] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[ 1.478466] ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
[ 1.478469] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[ 1.478472] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[ 1.478475] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.478484] ohci_hcd 0000:00:13.1: hcca frame #0005
[ 1.478488] ohci_hcd 0000:00:13.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[ 1.478491] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.478494] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[ 1.478497] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
[ 1.478501] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
[ 1.478504] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
[ 1.478512] usb usb6: default language 0x0409
[ 1.478517] usb usb6: udev 1, busnum 6, minor = 640
[ 1.478519] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.478825] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.479377] usb usb6: Product: OHCI Host Controller
[ 1.479683] usb usb6: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[ 1.479986] usb usb6: SerialNumber: 0000:00:13.1
[ 1.480410] usb usb6: usb_probe_device
[ 1.480411] usb usb6: configuration #1 chosen from 1 choice
[ 1.480416] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 1.480454] hub 6-0:1.0: usb_probe_interface
[ 1.480455] hub 6-0:1.0: usb_probe_interface - got id
[ 1.480457] hub 6-0:1.0: USB hub found
[ 1.480762] hub 6-0:1.0: 3 ports detected
[ 1.481064] hub 6-0:1.0: standalone hub
[ 1.481066] hub 6-0:1.0: no power switching (usb 1.0)
[ 1.481067] hub 6-0:1.0: global over-current protection
[ 1.481069] hub 6-0:1.0: power on to power good time: 4ms
[ 1.481073] hub 6-0:1.0: local power source is good
[ 1.481074] hub 6-0:1.0: no over-current condition exists
[ 1.481076] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 1.481087] drivers/usb/core/inode.c: creating file '001'
[ 1.481146] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.481471] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.481777] drivers/usb/core/inode.c: creating file '007'
[ 1.481855] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.482433] ohci_hcd 0000:00:14.5: created debug files
[ 1.482435] ohci_hcd 0000:00:14.5: supports USB remote wakeup
[ 1.482439] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.521459] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 1.525479] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.525809] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.537457] ohci_hcd 0000:00:14.5: OHCI controller state
[ 1.537461] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers
[ 1.537465] ohci_hcd 0000:00:14.5: control 0x083 HCFS=operational CBSR=3
[ 1.537468] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
[ 1.537471] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
[ 1.537474] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.537483] ohci_hcd 0000:00:14.5: hcca frame #0005
[ 1.537486] ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
[ 1.537490] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.537493] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
[ 1.537496] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
[ 1.537499] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
[ 1.537508] usb usb7: default language 0x0409
[ 1.537513] usb usb7: udev 1, busnum 7, minor = 768
[ 1.537514] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.537821] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.538382] usb usb7: Product: OHCI Host Controller
[ 1.538691] usb usb7: Manufacturer: Linux 3.2.11-gentoo ohci_hcd
[ 1.538991] usb usb7: SerialNumber: 0000:00:14.5
[ 1.539414] usb usb7: usb_probe_device
[ 1.539416] usb usb7: configuration #1 chosen from 1 choice
[ 1.539420] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 1.539457] hub 7-0:1.0: usb_probe_interface
[ 1.539459] hub 7-0:1.0: usb_probe_interface - got id
[ 1.539460] hub 7-0:1.0: USB hub found
[ 1.539763] hub 7-0:1.0: 2 ports detected
[ 1.540065] hub 7-0:1.0: standalone hub
[ 1.540066] hub 7-0:1.0: no power switching (usb 1.0)
[ 1.540068] hub 7-0:1.0: global over-current protection
[ 1.540069] hub 7-0:1.0: power on to power good time: 4ms
[ 1.540073] hub 7-0:1.0: local power source is good
[ 1.540075] hub 7-0:1.0: no over-current condition exists
[ 1.540077] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 1.540087] drivers/usb/core/inode.c: creating file '001'
[ 1.540124] work_for_cpu used greatest stack depth: 5136 bytes left
[ 1.540436] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.540832] usbcore: registered new interface driver cdc_acm
[ 1.541131] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.541745] usbcore: registered new interface driver usblp
[ 1.542079] usbcore: registered new interface driver uas
[ 1.542382] Initializing USB Mass Storage driver...
[ 1.542738] usbcore: registered new interface driver usb-storage
[ 1.543038] USB Mass Storage support registered.
[ 1.543438] usbcore: registered new interface driver libusual
[ 1.543816] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.544811] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.545122] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.545614] mousedev: PS/2 mouse device common for all mice
[ 1.546155] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 1.546551] rtc_cmos 00:05: RTC can wake from S4
[ 1.546974] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.547303] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.547676] i2c /dev entries driver
[ 1.548044] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 1.548619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.549279] it87: Found IT8720F chip at 0x228, revision 8
[ 1.549616] it87: Routing internal VCCH to in7
[ 1.549930] it87: Beeping is supported
[ 1.550668] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@...
[ 1.551261] cpuidle: using governor ladder
[ 1.551569] EFI Variables Facility v0.08 2004-May-17
[ 1.552589] usbcore: registered new interface driver usbhid
[ 1.552891] usbhid: USB HID core driver
[ 1.553542] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.565161] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.570263] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.570831] hda_intel: Disabling MSI
[ 1.571148] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 1.580458] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 1.639456] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.680454] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.680781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.681104] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.681822] ata1.00: ATA-8: WDC WD1600AAJS-00YZCA0, 01.03B01, max UDMA/133
[ 1.682135] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.682628] ata3.00: ATA-8: WDC WD2502ABYS-18B7A0, 02.03B04, max UDMA/133
[ 1.682932] ata3.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.689732] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.690122] ata1.00: configured for UDMA/133
[ 1.690499] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01117, max UDMA7
[ 1.690520] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
[ 1.690710] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.690751] sd 0:0:0:0: [sda] Write Protect is off
[ 1.690753] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.690766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.692797] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.693121] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[ 1.693593] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.693624] ata3.00: configured for UDMA/133
[ 1.696797] ata2.00: configured for UDMA/100
[ 1.699804] ata4.00: configured for UDMA/133
[ 1.705339] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
[ 1.714707] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.715266] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.715719] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.715813] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.716211] scsi 2:0:0:0: Direct-Access ATA WDC WD2502ABYS-1 02.0 PQ: 0 ANSI: 5
[ 1.716927] sd 2:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[ 1.717555] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.717637] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.717747] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.717912] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.717942] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.717944] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.717957] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.717959] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.720497] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.720511] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.731348] sdc: sdc1
[ 1.731916] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.747639] sdb: sdb1 sdb2 sdb3 < sdb5 >
[ 1.748305] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.755112] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 1.756004] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.858438] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 1.867437] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 1.876437] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 1.885438] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 1.889092] ALSA device list:
[ 1.889407] #0: HDA ATI SB at 0xfe024000 irq 16
[ 1.889711] #1: HDA NVidia at 0xfcffc000 irq 18
[ 1.890056] Netfilter messages via NETLINK v0.30.
[ 1.890375] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.890799] ctnetlink v0.93: registering with nfnetlink.
[ 1.891489] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.891820] TCP cubic registered
[ 1.892122] Initializing XFRM netlink socket
[ 1.892507] NET: Registered protocol family 10
[ 1.893492] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.893839] IPv6 over IPv4 tunneling driver
[ 1.894692] NET: Registered protocol family 17
[ 1.895000] Registering the dns_resolver key type
[ 1.895324] registered taskstats version 1
[ 1.895920] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[ 1.896503] console [netcon0] enabled
[ 1.896804] netconsole: network logging started
[ 1.901689] Freeing unused kernel memory: 4852k freed
[ 1.903109] Write protecting the kernel read-only data: 12288k
[ 1.908771] Freeing unused kernel memory: 1904k freed
[ 1.914226] Freeing unused kernel memory: 1704k freed
[ 1.928444] Refined TSC clocksource calibration: 3217.956 MHz.
[ 1.928750] Switching to clocksource tsc
[ 1.939368] REISERFS (device sda3): found reiserfs format "3.6" with standard journal
[ 1.939940] REISERFS (device sda3): using ordered data mode
[ 1.940241] reiserfs: using flush barriers
[ 1.949000] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 1.950213] REISERFS (device sda3): checking transaction log (sda3)
[ 2.015547] REISERFS (device sda3): Using r5 hash to sort names
[ 2.291098] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 3.089452] cat used greatest stack depth: 4088 bytes left
[ 3.263162] init-early.sh used greatest stack depth: 3696 bytes left
[ 4.183837] udevd[1060]: starting version 171
[ 5.550900] nvidia: module license 'NVIDIA' taints kernel.
[ 5.550903] Disabling lock debugging due to kernel taint
[ 5.674535] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.674543] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.674547] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.674674] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
[ 7.257145] reiserfs: enabling write barrier flush mode
[ 7.460654] kjournald starting. Commit interval 5 seconds
[ 7.460848] EXT3-fs (sda8): using internal journal
[ 7.460853] EXT3-fs (sda8): mounted filesystem with writeback data mode
[ 7.489463] kjournald starting. Commit interval 5 seconds
[ 7.489638] EXT3-fs (sda6): using internal journal
[ 7.489641] EXT3-fs (sda6): mounted filesystem with writeback data mode
[ 7.490185] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
[ 7.490192] REISERFS (device sda7): using ordered data mode
[ 7.490194] reiserfs: using flush barriers
[ 7.490356] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 7.490750] REISERFS (device sda7): checking transaction log (sda7)
[ 7.586209] REISERFS (device sda7): Using r5 hash to sort names
[ 8.906686] r8169 0000:03:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2)
[ 8.913975] r8169 0000:03:00.0: eth0: link down
[ 8.913983] r8169 0000:03:00.0: eth0: link down
[ 8.916376] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.055819] Adding 979960k swap on /dev/sda2. Priority:-1 extents:1 across:979960k
[ 9.544469] chronyd used greatest stack depth: 3576 bytes left
[ 10.621519] r8169 0000:03:00.0: eth0: link up
[ 10.623904] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.019915] eth0: no IPv6 routers present
[ 215.260111] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 215.260122] ehci_hcd 0000:00:13.2: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 215.260130] hub 2-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[ 215.368185] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
[ 215.420241] ehci_hcd 0000:00:13.2: port 3 full speed --> companion
[ 215.420246] ehci_hcd 0000:00:13.2: GetStatus port:3 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 215.420278] hub 2-0:1.0: port 3 not reset yet, waiting 50ms
[ 215.472298] ehci_hcd 0000:00:13.2: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 215.472319] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0008
[ 215.472325] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS
[ 215.472329] hub 5-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
[ 215.580416] hub 5-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
[ 215.644486] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
[ 215.696539] usb 5-3: new full-speed USB device number 2 using ohci_hcd
[ 215.762613] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
[ 215.830692] usb 5-3: ep0 maxpacket = 8
[ 215.840717] usb 5-3: skipped 4 descriptors after interface
[ 215.848722] usb 5-3: skipped 4 descriptors after interface
[ 215.851723] usb 5-3: default language 0x0409
[ 215.859732] usb 5-3: udev 2, busnum 5, minor = 513
[ 215.859735] usb 5-3: New USB device found, idVendor=22b8, idProduct=4902
[ 215.859737] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 215.859740] usb 5-3: Product: Motorola Phone (V3i)
[ 215.859741] usb 5-3: Manufacturer: Motorola Inc.
[ 215.859814] usb 5-3: usb_probe_device
[ 215.859816] usb 5-3: configuration #1 chosen from 2 choices
[ 215.865736] usb 5-3: adding 5-3:1.0 (config #1, interface 0)
[ 215.869753] cdc_acm 5-3:1.0: usb_probe_interface
[ 215.869757] cdc_acm 5-3:1.0: usb_probe_interface - got id
[ 215.869784] cdc_acm 5-3:1.0: ttyACM0: USB ACM device
[ 215.876782] usb 5-3: adding 5-3:1.1 (config #1, interface 1)
[ 215.880764] drivers/usb/core/inode.c: creating file '002'
[ 215.880781] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 215.880788] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0008
[ 322.607543] run-crons used greatest stack depth: 3512 bytes left
[ 626.108533] knotify4 used greatest stack depth: 3000 bytes left
root@fireball / # |
