| 1 |
On 5 Nov, Volker Armin Hemmann wrote: |
| 2 |
> On Donnerstag 05 November 2009, Helmut Jarausch wrote: |
| 3 |
>> Hi, |
| 4 |
>> |
| 5 |
>> I have 4 nearly identical machines (same brand and model of motherbaord) |
| 6 |
>> with AMD 790GX + SB750 Chipsets containing an (onbaord) Radeon HD 3300 |
| 7 |
>> graphics chip. |
| 8 |
>> |
| 9 |
>> All of these run identical systems |
| 10 |
>> kernel 2.6.31-r4, xorg-server-1.6.5 and ati-drivers-9.10 |
| 11 |
>> |
| 12 |
>> On one of these machines freezes after some hours with the |
| 13 |
>> following message in /var/log/messages |
| 14 |
>> |
| 15 |
>> Nov 5 11:35:48 numa-iii kernel: [fglrx] ASIC hang happened |
| 16 |
>> Nov 5 11:35:48 numa-iii kernel: Pid: 2698, comm: X Tainted: P W |
| 17 |
>> 2.6.31-gentoo-r4 #2 |
| 18 |
>> Nov 5 11:35:48 numa-iii kernel: Call Trace: |
| 19 |
>> Nov 5 11:35:48 numa-iii kernel: [<ffffffffa005b00c>] ? |
| 20 |
>> firegl_hardwareHangRecovery+0x1c/0x50 [fglrx] |
| 21 |
>> Nov 5 11:35:48 numa-iii kernel: [<ffffffffa00cc459>] ? |
| 22 |
>> _ZN4Asic9WaitUntil15ResetASICIfHungEv+0x9/0x10 [fglrx] |
| 23 |
>> Nov 5 11:35:48 numa-iii kernel: [<ffffffffa00cc40c>] ? |
| 24 |
>> _ZN4Asic9WaitUntil15WaitForCompleteEv+0x6c/0xb0 [fglrx] |
| 25 |
>> Nov 5 11:35:48 numa-iii kernel: [<ffffffffa00cb414>] ? |
| 26 |
>> _ZN4Asic19PM4ElapsedTimeStampERK23PM4_TS_INTERRUPT_PARAMSj14_LARGE_INTEGER+ |
| 27 |
>> 0x134/0x1c0 [fglrx] |
| 28 |
>> |
| 29 |
>> and so on. |
| 30 |
>> |
| 31 |
>> Shall I conclude that this motherboard is broken? |
| 32 |
>> Or is it bug in ati-drivers (not to recover from this). |
| 33 |
>> |
| 34 |
>> Is there a forum or mailing list to ask such specific questions |
| 35 |
>> about the ati-driver? |
| 36 |
> |
| 37 |
> yes and no. phoronix forums has bridgman who is an ati guy involved with the |
| 38 |
> opensource drivers. mtippett was amd's manager of the fglrx gang but left the |
| 39 |
> job. Still a good place. |
| 40 |
> |
| 41 |
> 'numa-iii' did you enable numa options in your kernel? single socket amd |
| 42 |
> systems are not numa - and is your psu ok, nothing overheating? |
| 43 |
> |
| 44 |
No, I didn't enable 'numa'. |
| 45 |
What, please, is 'psu' ? |
| 46 |
I've checked the cpu/board temperature, nothing unusual. |
| 47 |
The 'freeze' occur while only a screensaver was active. |
| 48 |
|
| 49 |
Thanks, |
| 50 |
Helmut. |
| 51 |
|
| 52 |
-- |
| 53 |
Helmut Jarausch |
| 54 |
|
| 55 |
Lehrstuhl fuer Numerische Mathematik |
| 56 |
RWTH - Aachen University |
| 57 |
D 52056 Aachen, Germany |
Archives