1 |
|
2 |
|
3 |
|
4 |
|
5 |
|
6 |
|
7 |
Also, when I recompile to 2.6.15.4, on reboot, It get this message:
|
8 |
|
9 |
sh: can't find tty: job control turned off.
|
10 |
$
|
11 |
|
12 |
|
13 |
God Bless, |
14 |
|
15 |
Ryan A. Rice |
16 |
Operations Manager |
17 |
i*hydra, Where Price and Power Converge. |
18 |
http://www.ihydra.com |
19 |
rrice@××××××.com |
20 |
Toll Free: (866)-433-1238 |
21 |
Cell: (207)-333-1258 |
22 |
Fax: (207)-226-7376 |
23 |
|
24 |
Any and all information/attachments are strictly proprietary and confidential. If you have received this message in error, please delete it immediately, and notify rrice@××××××.com Thank you. |
25 |
|
26 |
+---------------------------------+ |
27 |
|
28 |
|
29 |
|
30 |
Ryan Rice wrote: |
31 |
|
32 |
|
33 |
Motherboard: Tyan S4881 + M4881
|
34 |
Processors: (8) AMD Opteron 875 (Dual Core)
|
35 |
Ram: (32) 2GB DDR400 REG ECC Manuf.: Dataram
|
36 |
|
37 |
The first time that I booted after the gentoo install, it told me that |
38 |
APIC had failed on CPU0. After that I never received that error |
39 |
again. I've had problems with APIC and 3ware controller card support |
40 |
in linux before. Maybe because this system is so hardware-dense APIC |
41 |
is causing me problems? I've tried disabling it, but then I get a |
42 |
kernel panic.
|
43 |
|
44 |
Thanks.
|
45 |
God Bless, |
46 |
|
47 |
Ryan A. Rice |
48 |
Operations Manager |
49 |
i*hydra, Where Price and Power Converge. |
50 |
http://www.ihydra.com |
51 |
rrice@××××××.com |
52 |
Toll Free: (866)-433-1238 |
53 |
Cell: (207)-333-1258 |
54 |
Fax: (207)-226-7376 |
55 |
|
56 |
Any and all information/attachments are strictly proprietary and confidential. If you have received this message in error, please delete it immediately, and notify rrice@××××××.com Thank you. |
57 |
|
58 |
+---------------------------------+ |
59 |
|
60 |
|
61 |
|
62 |
Stuart Haas wrote: |
63 |
|
64 |
|
65 |
Sounds to me like it might be a hardware/bios problem, rather than a |
66 |
kernel issue. I remember having a similar problem a while ago with my |
67 |
system (with less RAM of course).
|
68 |
|
69 |
What mother board and BIOS are you running? How many CPUs? Also, what |
70 |
RAM are you using?
|
71 |
|
72 |
Stuart
|
73 |
|
74 |
Ryan Rice wrote: |
75 |
|
76 |
|
77 |
It does get past GRUB. When it goes to load the image off the drive it |
78 |
chokes.
|
79 |
|
80 |
I cannot get past 31GB what so ever. When I load it up to 32GB or |
81 |
more, I get this problem, and when I drop back down to 31GB all is fine.
|
82 |
|
83 |
I have memory testing/burn-in equipment, which says all of the DIMMs' |
84 |
are in perfect working order.
|
85 |
|
86 |
It reboots so fast, that I'm not aware of a way to snag the dump before |
87 |
it reboots. Any suggestions?
|
88 |
God Bless, |
89 |
|
90 |
Ryan A. Rice |
91 |
Operations Manager |
92 |
i*hydra, Where Price and Power Converge. |
93 |
http://www.ihydra.com |
94 |
rrice@××××××.com |
95 |
Toll Free: (866)-433-1238 |
96 |
Cell: (207)-333-1258 |
97 |
Fax: (207)-226-7376 |
98 |
|
99 |
Any and all information/attachments are strictly proprietary and confidential. If you have received this message in error, please delete it immediately, and notify rrice@××××××.com Thank you. |
100 |
|
101 |
+---------------------------------+ |
102 |
|
103 |
|
104 |
|
105 |
Paul de Vrieze wrote: |
106 |
|
107 |
On Tuesday 21 February 2006 15:48, Ryan Rice wrote: |
108 |
|
109 |
|
110 |
I am having a problem putting 32GB or more of RAM into my system with |
111 |
Gentoo. |
112 |
|
113 |
I can install Gentoo (2005.1 r1) perfectly fine even on 30GB or lower, |
114 |
once I get up in to the OS, if I shut down the machine and stock it up |
115 |
to 64GB, when the system comes back online, and goes to boot the kernel |
116 |
out of the loader, the system resets itself and goes back to POST. Any |
117 |
ideas? |
118 |
|
119 |
I've even tried to re-compile to kernel 2.6.15.4 and that gives me a |
120 |
panic citing an Oops! Attempted to kill init! |
121 |
|
122 |
Let me know if you'd like more detail. |
123 |
|
124 |
|
125 |
|
126 |
Does the kernel reboot itself or is it grub that chokes? Does it also have |
127 |
the problems with 32 GB, or with 48 GB? And what about 63 (if you can |
128 |
test that). You might also want to try to get at the output of the kernel |
129 |
before it reboots. |
130 |
|
131 |
Paul |
132 |
|
133 |
|
134 |
|
135 |
-- gentoo-amd64@g.o |
136 |
mailing list |
137 |
-- gentoo-amd64@g.o |
138 |
mailing list |
139 |
|
140 |
-- gentoo-amd64@g.o mailing list |
141 |
|
142 |
|
143 |
|
144 |
-- |
145 |
gentoo-amd64@g.o mailing list |
146 |
|
147 |
|
148 |
|