1 |
could somebody help me with this i have amd64 nforce4 chipset and ati |
2 |
radeon card but i can't make it run |
3 |
|
4 |
here is dmesg: |
5 |
|
6 |
Bootdata ok (command line is root=/dev/sda6 video=radeonfb udev) |
7 |
Linux version 2.6.14-rc4Matalo (root@Matalo) (gcc version 3.4.3 |
8 |
20041125 (Gentoo 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 PREEMPT Sun Oct |
9 |
16 19:19:12 GMT 2005 |
10 |
BIOS-provided physical RAM map: |
11 |
BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
12 |
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
13 |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
14 |
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) |
15 |
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) |
16 |
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) |
17 |
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) |
18 |
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
19 |
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) |
20 |
BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) |
21 |
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) |
22 |
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7950 |
23 |
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
24 |
0x000000003fff3040 |
25 |
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
26 |
0x000000003fff30c0 |
27 |
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
28 |
0x000000003fff9000 |
29 |
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
30 |
0x000000003fff8f40 |
31 |
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ |
32 |
0x0000000000000000 |
33 |
On node 0 totalpages: 262031 |
34 |
DMA zone: 3999 pages, LIFO batch:1 |
35 |
Normal zone: 258032 pages, LIFO batch:31 |
36 |
HighMem zone: 0 pages, LIFO batch:1 |
37 |
Nvidia board detected. Ignoring ACPI timer override. |
38 |
ACPI: PM-Timer IO Port: 0x4008 |
39 |
ACPI: Local APIC address 0xfee00000 |
40 |
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
41 |
Processor #0 15:15 APIC version 16 |
42 |
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
43 |
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
44 |
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
45 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
46 |
ACPI: BIOS IRQ0 pin2 override ignored. |
47 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
48 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
49 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
50 |
ACPI: IRQ9 used by override. |
51 |
ACPI: IRQ14 used by override. |
52 |
ACPI: IRQ15 used by override. |
53 |
Setting APIC routing to flat |
54 |
Using ACPI (MADT) for SMP configuration information |
55 |
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) |
56 |
Checking aperture... |
57 |
CPU 0: aperture @ 4000000 size 32 MB |
58 |
Aperture from northbridge cpu 0 too small (32 MB) |
59 |
No AGP bridge found |
60 |
Your BIOS doesn't leave a aperture memory hole |
61 |
Please enable the IOMMU option in the BIOS setup |
62 |
This costs you 64 MB of RAM |
63 |
Mapping aperture over 65536 KB of RAM @ 4000000 |
64 |
Built 1 zonelists |
65 |
Kernel command line: root=/dev/sda6 video=radeonfb udev |
66 |
Initializing CPU#0 |
67 |
PID hash table entries: 4096 (order: 12, 131072 bytes) |
68 |
time.c: Using 3.579545 MHz PM timer. |
69 |
time.c: Detected 1808.367 MHz processor. |
70 |
time.c: Using PIT/TSC based timekeeping. |
71 |
Console: colour VGA+ 80x25 |
72 |
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) |
73 |
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) |
74 |
Memory: 958872k/1048512k available (3407k kernel code, 88688k |
75 |
reserved, 1365k data, 244k init) |
76 |
Calibrating delay using timer specific routine.. 3620.58 BogoMIPS (lpj=7241166) |
77 |
Mount-cache hash table entries: 256 |
78 |
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
79 |
CPU: L2 Cache: 512K (64 bytes/line) |
80 |
mtrr: v2.0 (20020519) |
81 |
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 |
82 |
Using local APIC timer interrupts. |
83 |
Detected 12.558 MHz APIC timer. |
84 |
testing NMI watchdog ... OK. |
85 |
softlockup thread 0 started up. |
86 |
NET: Registered protocol family 16 |
87 |
ACPI: bus type pci registered |
88 |
PCI: Using configuration type 1 |
89 |
PCI: Using MMCONFIG at e0000000 |
90 |
ACPI: Subsystem revision 20050902 |
91 |
ACPI: Interpreter enabled |
92 |
ACPI: Using IOAPIC for interrupt routing |
93 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
94 |
PCI: Probing PCI hardware (bus 00) |
95 |
PCI: Transparent bridge - 0000:00:09.0 |
96 |
Boot video device is 0000:05:00.0 |
97 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
98 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] |
99 |
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) |
100 |
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. |
101 |
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 *7 9 10 11 12 14 15) |
102 |
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. |
103 |
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. |
104 |
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) |
105 |
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. |
106 |
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 *4 5 7 9 10 11 12 14 15) |
107 |
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) |
108 |
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. |
109 |
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) |
110 |
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) |
111 |
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. |
112 |
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) |
113 |
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15) |
114 |
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. |
115 |
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. |
116 |
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. |
117 |
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. |
118 |
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. |
119 |
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. |
120 |
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. |
121 |
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. |
122 |
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. |
123 |
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. |
124 |
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. |
125 |
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. |
126 |
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. |
127 |
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. |
128 |
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. |
129 |
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. |
130 |
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. |
131 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
132 |
pnp: PnP ACPI init |
133 |
pnp: PnP ACPI: found 10 devices |
134 |
SCSI subsystem initialized |
135 |
usbcore: registered new driver usbfs |
136 |
usbcore: registered new driver hub |
137 |
PCI: Using ACPI for IRQ routing |
138 |
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report |
139 |
PCI: Cannot allocate resource region 2 of device 0000:05:00.0 |
140 |
PCI: Cannot allocate resource region 0 of device 0000:05:00.1 |
141 |
PCI-DMA: Disabling AGP. |
142 |
PCI-DMA: More than 4GB of RAM and no IOMMU |
143 |
PCI-DMA: 32bit PCI IO may malfunction.<6>PCI-DMA: Disabling IOMMU. |
144 |
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved |
145 |
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved |
146 |
pnp: 00:00: ioport range 0x4400-0x447f has been reserved |
147 |
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved |
148 |
pnp: 00:00: ioport range 0x4800-0x487f has been reserved |
149 |
pnp: 00:00: ioport range 0x4880-0x48ff has been reserved |
150 |
PCI: Bridge: 0000:00:09.0 |
151 |
IO window: a000-afff |
152 |
MEM window: fe900000-fe9fffff |
153 |
PREFETCH window: fea00000-feafffff |
154 |
PCI: Bridge: 0000:00:0b.0 |
155 |
IO window: 9000-9fff |
156 |
MEM window: fe800000-fe8fffff |
157 |
PREFETCH window: fe700000-fe7fffff |
158 |
PCI: Bridge: 0000:00:0c.0 |
159 |
IO window: 8000-8fff |
160 |
MEM window: fe600000-fe6fffff |
161 |
PREFETCH window: fe500000-fe5fffff |
162 |
PCI: Bridge: 0000:00:0d.0 |
163 |
IO window: 7000-7fff |
164 |
MEM window: fe400000-fe4fffff |
165 |
PREFETCH window: fe300000-fe3fffff |
166 |
PCI: Bridge: 0000:00:0e.0 |
167 |
IO window: 6000-6fff |
168 |
MEM window: fe200000-fe2fffff |
169 |
PREFETCH window: b0000000-cfffffff |
170 |
PCI: Setting latency timer of device 0000:00:09.0 to 64 |
171 |
PCI: Setting latency timer of device 0000:00:0b.0 to 64 |
172 |
PCI: Setting latency timer of device 0000:00:0c.0 to 64 |
173 |
PCI: Setting latency timer of device 0000:00:0d.0 to 64 |
174 |
PCI: Setting latency timer of device 0000:00:0e.0 to 64 |
175 |
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ |
176 |
Total HugeTLB memory allocated, 0 |
177 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
178 |
NTFS driver 2.1.24 [Flags: R/W]. |
179 |
SGI XFS with large block/inode numbers, no debug enabled |
180 |
SGI XFS Quota Management subsystem |
181 |
Initializing Cryptographic API |
182 |
PCI: Setting latency timer of device 0000:00:0b.0 to 64 |
183 |
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS |
184 |
assign_interrupt_mode Found MSI capability |
185 |
Allocate Port Service[pcie00] |
186 |
Allocate Port Service[pcie03] |
187 |
PCI: Setting latency timer of device 0000:00:0c.0 to 64 |
188 |
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS |
189 |
assign_interrupt_mode Found MSI capability |
190 |
Allocate Port Service[pcie00] |
191 |
Allocate Port Service[pcie03] |
192 |
PCI: Setting latency timer of device 0000:00:0d.0 to 64 |
193 |
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS |
194 |
assign_interrupt_mode Found MSI capability |
195 |
Allocate Port Service[pcie00] |
196 |
Allocate Port Service[pcie03] |
197 |
PCI: Setting latency timer of device 0000:00:0e.0 to 64 |
198 |
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS |
199 |
assign_interrupt_mode Found MSI capability |
200 |
Allocate Port Service[pcie00] |
201 |
Allocate Port Service[pcie03] |
202 |
ACPI: Power Button (FF) [PWRF] |
203 |
ACPI: Power Button (CM) [PWRB] |
204 |
ACPI: Sleep Button (CM) [SLPB] |
205 |
ACPI: Fan [FAN] (on) |
206 |
ACPI: CPU0 (power states: C1[C1]) |
207 |
ACPI: Processor [CPU0] (supports 8 throttling states) |
208 |
ACPI: Thermal Zone [THRM] (33 C) |
209 |
Real Time Clock Driver v1.12 |
210 |
Linux agpgart interface v0.101 (c) Dave Jones |
211 |
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
212 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
213 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
214 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled |
215 |
io scheduler noop registered |
216 |
io scheduler deadline registered |
217 |
io scheduler cfq registered |
218 |
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize |
219 |
loop: loaded (max 8 devices) |
220 |
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.41. |
221 |
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 |
222 |
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, |
223 |
low) -> IRQ 217 |
224 |
PCI: Setting latency timer of device 0000:00:0a.0 to 64 |
225 |
eth0: forcedeth.c: subsystem: 0cb84:10de bound to 0000:00:0a.0 |
226 |
8139too Fast Ethernet driver 0.9.27 |
227 |
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 |
228 |
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, |
229 |
low) -> IRQ 225 |
230 |
eth1: RealTek RTL8139 at 0xffffc20000004000, 00:02:44:5a:77:98, IRQ 225 |
231 |
eth1: Identified 8139 chip type 'RTL-8100B/8139D' |
232 |
tun: Universal TUN/TAP device driver, 1.6 |
233 |
tun: (C) 1999-2004 Max Krasnyansky <maxk@××××××××.com> |
234 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
235 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
236 |
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 |
237 |
NFORCE-CK804: chipset revision 162 |
238 |
NFORCE-CK804: not 100% native mode: will probe irqs later |
239 |
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller |
240 |
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA |
241 |
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA |
242 |
Probing IDE interface ide0... |
243 |
hda: Maxtor 2F040L0, ATA DISK drive |
244 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
245 |
Probing IDE interface ide1... |
246 |
hdc: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive |
247 |
ide1 at 0x170-0x177,0x376 on irq 15 |
248 |
hda: max request size: 128KiB |
249 |
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) |
250 |
hda: cache flushes supported |
251 |
hda: hda1 |
252 |
libata version 1.12 loaded. |
253 |
sata_nv version 0.8 |
254 |
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 |
255 |
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, |
256 |
low) -> IRQ 233 |
257 |
PCI: Setting latency timer of device 0000:00:07.0 to 64 |
258 |
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 233 |
259 |
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 233 |
260 |
ata1: no device found (phy stat 00000000) |
261 |
scsi0 : sata_nv |
262 |
ata2: no device found (phy stat 00000000) |
263 |
scsi1 : sata_nv |
264 |
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 |
265 |
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, |
266 |
low) -> IRQ 50 |
267 |
PCI: Setting latency timer of device 0000:00:08.0 to 64 |
268 |
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 50 |
269 |
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 50 |
270 |
ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f |
271 |
ata3: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 |
272 |
nv_sata: Primary device added |
273 |
nv_sata: Primary device removed |
274 |
nv_sata: Secondary device added |
275 |
nv_sata: Secondary device removed |
276 |
ata3: dev 0 configured for UDMA/133 |
277 |
scsi2 : sata_nv |
278 |
ata4: no device found (phy stat 00000000) |
279 |
scsi3 : sata_nv |
280 |
Vendor: ATA Model: WDC WD1600JS-22M Rev: 02.0 |
281 |
Type: Direct-Access ANSI SCSI revision: 05 |
282 |
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) |
283 |
SCSI device sda: drive cache: write back |
284 |
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) |
285 |
SCSI device sda: drive cache: write back |
286 |
sda: sda1 sda2 < sda5 sda6 sda7 > |
287 |
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 |
288 |
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 |
289 |
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, |
290 |
low) -> IRQ 58 |
291 |
PCI: Setting latency timer of device 0000:00:02.1 to 64 |
292 |
ehci_hcd 0000:00:02.1: EHCI Host Controller |
293 |
ehci_hcd 0000:00:02.1: debug port 1 |
294 |
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 |
295 |
ehci_hcd 0000:00:02.1: irq 58, io mem 0xfebfe000 |
296 |
PCI: cache line size of 64 is not supported by device 0000:00:02.1 |
297 |
ehci_hcd 0000:00:02.1: park 0 |
298 |
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 |
299 |
hub 1-0:1.0: USB hub found |
300 |
hub 1-0:1.0: 10 ports detected |
301 |
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
302 |
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 |
303 |
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, |
304 |
low) -> IRQ 217 |
305 |
PCI: Setting latency timer of device 0000:00:02.0 to 64 |
306 |
ohci_hcd 0000:00:02.0: OHCI Host Controller |
307 |
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 |
308 |
ohci_hcd 0000:00:02.0: irq 217, io mem 0xfebff000 |
309 |
hub 2-0:1.0: USB hub found |
310 |
hub 2-0:1.0: 10 ports detected |
311 |
USB Universal Host Controller Interface driver v2.3 |
312 |
usbcore: registered new driver usblp |
313 |
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver |
314 |
Initializing USB Mass Storage driver... |
315 |
usbcore: registered new driver usb-storage |
316 |
USB Mass Storage support registered. |
317 |
usbcore: registered new driver usbhid |
318 |
drivers/usb/input/hid-core.c: v2.6:USB HID core driver |
319 |
mice: PS/2 mouse device common for all mice |
320 |
I2O subsystem v1.288 |
321 |
i2o: max drivers = 8 |
322 |
I2O Configuration OSM v1.248 |
323 |
I2O Bus Adapter OSM v$Rev$ |
324 |
I2O SCSI Peripheral OSM v1.282 |
325 |
I2O ProcFS OSM v1.145 |
326 |
i2c /dev entries driver |
327 |
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 |
328 |
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 |
329 |
Intel 810 + AC97 Audio, version 1.01, 19:18:11 Oct 16 2005 |
330 |
Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 |
331 |
08:13:09 2005 UTC). |
332 |
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 |
333 |
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, |
334 |
low) -> IRQ 233 |
335 |
PCI: Setting latency timer of device 0000:00:04.0 to 64 |
336 |
input: AT Translated Set 2 keyboard on isa0060/serio0 |
337 |
input: GenPS/2 Genius Wheel Mouse on isa0060/serio1 |
338 |
intel8x0_measure_ac97_clock: measured 54758 usecs |
339 |
intel8x0: clocking to 46936 |
340 |
ALSA device list: |
341 |
#0: NVidia CK804 with ALC850 at 0xfebfd000, irq 233 |
342 |
oprofile: using NMI interrupt. |
343 |
NET: Registered protocol family 2 |
344 |
IP route cache hash table entries: 65536 (order: 7, 524288 bytes) |
345 |
TCP established hash table entries: 262144 (order: 9, 2097152 bytes) |
346 |
TCP bind hash table entries: 65536 (order: 7, 524288 bytes) |
347 |
TCP: Hash tables configured (established 262144 bind 65536) |
348 |
TCP reno registered |
349 |
TCP bic registered |
350 |
NET: Registered protocol family 1 |
351 |
NET: Registered protocol family 10 |
352 |
IPv6 over IPv4 tunneling driver |
353 |
NET: Registered protocol family 17 |
354 |
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3) |
355 |
powernow-k8: BIOS error - no PSB or ACPI _PSS objects |
356 |
UDF-fs: No VRS found |
357 |
XFS mounting filesystem sda6 |
358 |
Ending clean XFS mount for filesystem: sda6 |
359 |
VFS: Mounted root (xfs filesystem) readonly. |
360 |
Freeing unused kernel memory: 244k freed |
361 |
Adding 497972k swap on /dev/sda7. Priority:-1 extents:1 across:497972k |
362 |
|
363 |
-- |
364 |
gentoo-amd64@g.o mailing list |