| 1 |
have you tried running fdisk /dev/sda1 from your 32 bit pata install? Have |
| 2 |
you tried booting the livecd with no pata hard drives connected? |
| 3 |
----- Original Message ----- |
| 4 |
From: "Marcel Treis" <trei4702@×××××××××.de> |
| 5 |
To: <gentoo-amd64@l.g.o> |
| 6 |
Sent: Sunday, January 29, 2006 3:04 PM |
| 7 |
Subject: Re: [gentoo-amd64] Problems with nForce 3 + SATA + Gentoo |
| 8 |
2005.1[-r1] |
| 9 |
|
| 10 |
|
| 11 |
> John Myers wrote: |
| 12 |
> |
| 13 |
>>On Sunday 29 January 2006 02:02, Marcel Treis wrote: |
| 14 |
>> |
| 15 |
>> |
| 16 |
>>>I have a Gentoo 32-bit running on the same machine, yet on another (ATA) |
| 17 |
>>>harddrive. This runs fine. |
| 18 |
>>> |
| 19 |
>>> |
| 20 |
>>I need more information. Please send outuput of 'dmesg' from both. |
| 21 |
>> |
| 22 |
> I have attached the dmesg of two runs, both with 2005.1-r1, the first |
| 23 |
> with no additional parameters, the second with "acpi=off noapic nodetect |
| 24 |
> docache". |
| 25 |
> I hope that helps. |
| 26 |
> |
| 27 |
> I have also downloaded the universal-2005-12-11, but it gives me a very |
| 28 |
> limited shell because it cant make a root partition. I could give you |
| 29 |
> better intel on that, if you folks think it could help. |
| 30 |
> |
| 31 |
> Thanks! |
| 32 |
> |
| 33 |
|
| 34 |
|
| 35 |
-------------------------------------------------------------------------------- |
| 36 |
|
| 37 |
|
| 38 |
> Bootdata ok (command line is initrd=gentoo.igz root=/dev/ram0 |
| 39 |
> init=/linuxrc looptype=squashfs loop=/livecd.squashfs udev nodevfs |
| 40 |
> dokeymap cdroot vga=791 splash=silent,theme:livecd-2005.1 |
| 41 |
> CONSOLE=/dev/tty1 quiet BOOT_IMAGE=gentoo nodetect acpi=off noapic |
| 42 |
> docache) |
| 43 |
> Linux version 2.6.12-gentoo-r10 (root@poseidon) (gcc version 3.4.3 |
| 44 |
> 20041125 (Gentoo 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 SMP Sun Nov 13 |
| 45 |
> 20:03:23 UTC 2005 |
| 46 |
> BIOS-provided physical RAM map: |
| 47 |
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
| 48 |
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
| 49 |
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| 50 |
> BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) |
| 51 |
> BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) |
| 52 |
> BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) |
| 53 |
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
| 54 |
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) |
| 55 |
> BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) |
| 56 |
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) |
| 57 |
> On node 0 totalpages: 393200 |
| 58 |
> DMA zone: 4096 pages, LIFO batch:1 |
| 59 |
> Normal zone: 389104 pages, LIFO batch:31 |
| 60 |
> HighMem zone: 0 pages, LIFO batch:1 |
| 61 |
> Nvidia board detected. Ignoring ACPI timer override. |
| 62 |
> Intel MultiProcessor Specification v1.4 |
| 63 |
> Virtual Wire compatibility mode. |
| 64 |
> OEM ID: OEM00000 <6>Product ID: PROD00000000 <6>APIC at: 0xFEE00000 |
| 65 |
> Processor #0 15:12 APIC version 17 |
| 66 |
> I/O APIC #2 Version 17 at 0xFEC00000. |
| 67 |
> Setting APIC routing to flat |
| 68 |
> Processors: 1 |
| 69 |
> Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000) |
| 70 |
> Checking aperture... |
| 71 |
> CPU 0: aperture @ d0000000 size 128 MB |
| 72 |
> Built 1 zonelists |
| 73 |
> Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc |
| 74 |
> looptype=squashfs loop=/livecd.squashfs udev nodevfs dokeymap cdroot |
| 75 |
> vga=791 splash=silent,theme:livecd-2005.1 CONSOLE=/dev/tty1 quiet |
| 76 |
> BOOT_IMAGE=gentoo nodetect acpi=off noapic docache |
| 77 |
> Initializing CPU#0 |
| 78 |
> PID hash table entries: 4096 (order: 12, 131072 bytes) |
| 79 |
> time.c: Using 1.193182 MHz PIT timer. |
| 80 |
> time.c: Detected 1808.813 MHz processor. |
| 81 |
> Speakup v-2.00 CVS: Wed Mar 2 20:22:02 EST 2005 : initialized |
| 82 |
> Console: colour dummy device 80x25 |
| 83 |
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| 84 |
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| 85 |
> Memory: 1526992k/1572800k available (2489k kernel code, 45168k reserved, |
| 86 |
> 695k data, 188k init) |
| 87 |
> Calibrating delay loop... 3571.71 BogoMIPS (lpj=1785856) |
| 88 |
> Mount-cache hash table entries: 256 |
| 89 |
> Couldn't initialize miscdevice /dev/synth. |
| 90 |
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
| 91 |
> CPU: L2 Cache: 512K (64 bytes/line) |
| 92 |
> CPU 0(1) -> Node 0 -> Core 0 |
| 93 |
> Using local APIC timer interrupts. |
| 94 |
> Detected 12.561 MHz APIC timer. |
| 95 |
> Brought up 1 CPUs |
| 96 |
> time.c: Using PIT/TSC based timekeeping. |
| 97 |
> testing NMI watchdog ... OK. |
| 98 |
> CPU0 attaching sched-domain: |
| 99 |
> domain 0: span 01 |
| 100 |
> groups: 01 |
| 101 |
> domain 1: span 01 |
| 102 |
> groups: 01 |
| 103 |
> checking if image is initramfs... it is |
| 104 |
> NET: Registered protocol family 16 |
| 105 |
> PCI: Using configuration type 1 |
| 106 |
> mtrr: v2.0 (20020519) |
| 107 |
> ACPI: Subsystem revision 20050309 |
| 108 |
> ACPI: Interpreter disabled. |
| 109 |
> Linux Plug and Play Support v0.97 (c) Adam Belay |
| 110 |
> pnp: PnP ACPI: disabled |
| 111 |
> SCSI subsystem initialized |
| 112 |
> PCI: Probing PCI hardware |
| 113 |
> PCI: Probing PCI hardware (bus 00) |
| 114 |
> Boot video device is 0000:01:00.0 |
| 115 |
> PCI: Using IRQ router default [10de/00e1] at 0000:00:00.0 |
| 116 |
> agpgart: Detected AGP bridge 0 |
| 117 |
> agpgart: Setting up Nforce3 AGP. |
| 118 |
> agpgart: AGP aperture is 128M @ 0xd0000000 |
| 119 |
> PCI-DMA: Disabling IOMMU. |
| 120 |
> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ |
| 121 |
> inotify device minor=63 |
| 122 |
> Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher |
| 123 |
> SGI XFS with ACLs, security attributes, realtime, large block/inode |
| 124 |
> numbers, no debug enabled |
| 125 |
> SGI XFS Quota Management subsystem |
| 126 |
> Initializing Cryptographic API |
| 127 |
> Real Time Clock Driver v1.12 |
| 128 |
> Linux agpgart interface v0.101 (c) Dave Jones |
| 129 |
> vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20000080000, using |
| 130 |
> 3072k, total 131072k |
| 131 |
> vesafb: mode is 1024x768x16, linelength=2048, pages=1 |
| 132 |
> vesafb: scrolling: redraw |
| 133 |
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 |
| 134 |
> Console: switching to colour frame buffer device 128x48 |
| 135 |
> fbsplash: console 0 using theme 'livecd-2005.1' |
| 136 |
> fbsplash: switched splash state to 'on' on console 0 |
| 137 |
> fb0: VESA VGA frame buffer device |
| 138 |
> PNP: No PS/2 controller found. Probing ports directly. |
| 139 |
> serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 140 |
> serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 141 |
> Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled |
| 142 |
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 143 |
> mice: PS/2 mouse device common for all mice |
| 144 |
> io scheduler noop registered |
| 145 |
> io scheduler deadline registered |
| 146 |
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize |
| 147 |
> loop: loaded (max 8 devices) |
| 148 |
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| 149 |
> ide: Assuming 33MHz system bus speed for PIO modes; override with |
| 150 |
> idebus=xx |
| 151 |
> NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 |
| 152 |
> NFORCE3-250: chipset revision 162 |
| 153 |
> NFORCE3-250: not 100% native mode: will probe irqs later |
| 154 |
> NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. |
| 155 |
> NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller |
| 156 |
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA |
| 157 |
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA |
| 158 |
> Probing IDE interface ide0... |
| 159 |
> input: AT Translated Set 2 keyboard on isa0060/serio0 |
| 160 |
> hda: Maxtor 6Y160P0, ATA DISK drive |
| 161 |
> input: PS/2 Generic Mouse on isa0060/serio1 |
| 162 |
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
| 163 |
> Probing IDE interface ide1... |
| 164 |
> hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive |
| 165 |
> ide1 at 0x170-0x177,0x376 on irq 15 |
| 166 |
> Probing IDE interface ide2... |
| 167 |
> Probing IDE interface ide3... |
| 168 |
> Probing IDE interface ide4... |
| 169 |
> Probing IDE interface ide5... |
| 170 |
> hda: max request size: 1024KiB |
| 171 |
> hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, |
| 172 |
> UDMA(133) |
| 173 |
> hda: cache flushes supported |
| 174 |
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 > |
| 175 |
> hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) |
| 176 |
> Uniform CD-ROM driver Revision: 3.20 |
| 177 |
> NET: Registered protocol family 2 |
| 178 |
> IP: routing cache hash table of 8192 buckets, 128Kbytes |
| 179 |
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes) |
| 180 |
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 181 |
> TCP: Hash tables configured (established 262144 bind 65536) |
| 182 |
> NET: Registered protocol family 1 |
| 183 |
> NET: Registered protocol family 17 |
| 184 |
> Freeing unused kernel memory: 188k freed |
| 185 |
> ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find |
| 186 |
> reiserfs on hdc |
| 187 |
> VFS: Can't find ext3 filesystem on dev hdc. |
| 188 |
> VFS: Can't find an ext2 filesystem on dev hdc. |
| 189 |
> SQUASHFS error: Can't find a SQUASHFS superblock on hdc |
| 190 |
> FAT: bogus number of reserved sectors |
| 191 |
> VFS: Can't find a valid FAT filesystem on dev hdc. |
| 192 |
> ISO 9660 Extensions: Microsoft Joliet Level 3 |
| 193 |
> ISO 9660 Extensions: RRIP_1991A |
| 194 |
> usbcore: registered new driver usbfs |
| 195 |
> usbcore: registered new driver hub |
| 196 |
> kjournald starting. Commit interval 5 seconds |
| 197 |
> EXT3 FS on hda6, internal journal |
| 198 |
> EXT3-fs: mounted filesystem with ordered data mode. |
| 199 |
> |
| 200 |
|
| 201 |
|
| 202 |
-------------------------------------------------------------------------------- |
| 203 |
|
| 204 |
|
| 205 |
> Bootdata ok (command line is initrd=gentoo.igz root=/dev/ram0 |
| 206 |
> init=/linuxrc looptype=squashfs loop=/livecd.squashfs udev nodevfs |
| 207 |
> dokeymap cdroot vga=791 splash=silent,theme:livecd-2005.1 |
| 208 |
> CONSOLE=/dev/tty1 quiet BOOT_IMAGE=gentoo ) |
| 209 |
> Linux version 2.6.12-gentoo-r10 (root@poseidon) (gcc version 3.4.3 |
| 210 |
> 20041125 (Gentoo 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 SMP Sun Nov 13 |
| 211 |
> 20:03:23 UTC 2005 |
| 212 |
> BIOS-provided physical RAM map: |
| 213 |
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
| 214 |
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
| 215 |
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| 216 |
> BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) |
| 217 |
> BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) |
| 218 |
> BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) |
| 219 |
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
| 220 |
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) |
| 221 |
> BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) |
| 222 |
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) |
| 223 |
> ACPI: RSDP (v000 Nvidia ) @ |
| 224 |
> 0x00000000000f71e0 |
| 225 |
> ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
| 226 |
> 0x000000005fff3000 |
| 227 |
> ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
| 228 |
> 0x000000005fff3040 |
| 229 |
> ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
| 230 |
> 0x000000005fff7a00 |
| 231 |
> ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ |
| 232 |
> 0x0000000000000000 |
| 233 |
> On node 0 totalpages: 393200 |
| 234 |
> DMA zone: 4096 pages, LIFO batch:1 |
| 235 |
> Normal zone: 389104 pages, LIFO batch:31 |
| 236 |
> HighMem zone: 0 pages, LIFO batch:1 |
| 237 |
> Nvidia board detected. Ignoring ACPI timer override. |
| 238 |
> ACPI: Local APIC address 0xfee00000 |
| 239 |
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 240 |
> Processor #0 15:12 APIC version 16 |
| 241 |
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 242 |
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 243 |
> IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| 244 |
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 245 |
> ACPI: BIOS IRQ0 pin2 override ignored. |
| 246 |
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 247 |
> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| 248 |
> ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| 249 |
> ACPI: IRQ9 used by override. |
| 250 |
> ACPI: IRQ14 used by override. |
| 251 |
> ACPI: IRQ15 used by override. |
| 252 |
> Setting APIC routing to flat |
| 253 |
> Using ACPI (MADT) for SMP configuration information |
| 254 |
> Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000) |
| 255 |
> Checking aperture... |
| 256 |
> CPU 0: aperture @ d0000000 size 128 MB |
| 257 |
> Built 1 zonelists |
| 258 |
> Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc |
| 259 |
> looptype=squashfs loop=/livecd.squashfs udev nodevfs dokeymap cdroot |
| 260 |
> vga=791 splash=silent,theme:livecd-2005.1 CONSOLE=/dev/tty1 quiet |
| 261 |
> BOOT_IMAGE=gentoo |
| 262 |
> Initializing CPU#0 |
| 263 |
> PID hash table entries: 4096 (order: 12, 131072 bytes) |
| 264 |
> time.c: Using 1.193182 MHz PIT timer. |
| 265 |
> time.c: Detected 1808.826 MHz processor. |
| 266 |
> Speakup v-2.00 CVS: Wed Mar 2 20:22:02 EST 2005 : initialized |
| 267 |
> Console: colour dummy device 80x25 |
| 268 |
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| 269 |
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| 270 |
> Memory: 1526992k/1572800k available (2489k kernel code, 45168k reserved, |
| 271 |
> 695k data, 188k init) |
| 272 |
> Calibrating delay loop... 3571.71 BogoMIPS (lpj=1785856) |
| 273 |
> Mount-cache hash table entries: 256 |
| 274 |
> Couldn't initialize miscdevice /dev/synth. |
| 275 |
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
| 276 |
> CPU: L2 Cache: 512K (64 bytes/line) |
| 277 |
> CPU 0(1) -> Node 0 -> Core 0 |
| 278 |
> Using local APIC timer interrupts. |
| 279 |
> Detected 12.561 MHz APIC timer. |
| 280 |
> Brought up 1 CPUs |
| 281 |
> time.c: Using PIT/TSC based timekeeping. |
| 282 |
> testing NMI watchdog ... OK. |
| 283 |
> CPU0 attaching sched-domain: |
| 284 |
> domain 0: span 01 |
| 285 |
> groups: 01 |
| 286 |
> domain 1: span 01 |
| 287 |
> groups: 01 |
| 288 |
> checking if image is initramfs... it is |
| 289 |
> NET: Registered protocol family 16 |
| 290 |
> PCI: Using configuration type 1 |
| 291 |
> mtrr: v2.0 (20020519) |
| 292 |
> ACPI: Subsystem revision 20050309 |
| 293 |
> ACPI: Interpreter enabled |
| 294 |
> ACPI: Using IOAPIC for interrupt routing |
| 295 |
> ACPI: PCI Root Bridge [PCI0] (0000:00) |
| 296 |
> PCI: Probing PCI hardware (bus 00) |
| 297 |
> Boot video device is 0000:01:00.0 |
| 298 |
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| 299 |
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] |
| 300 |
> ACPI: Power Resource [ISAV] (on) |
| 301 |
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] |
| 302 |
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15) |
| 303 |
> ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 304 |
> ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, |
| 305 |
> disabled. |
| 306 |
> ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 307 |
> ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, |
| 308 |
> disabled. |
| 309 |
> ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15) |
| 310 |
> ACPI: PCI Interrupt Link [LUBB] (IRQs *3 4 5 6 7 10 11 12 14 15) |
| 311 |
> ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 6 7 10 11 12 14 15) |
| 312 |
> ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, |
| 313 |
> disabled. |
| 314 |
> ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) |
| 315 |
> ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, |
| 316 |
> disabled. |
| 317 |
> ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 10 11 12 14 15) |
| 318 |
> ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 6 7 10 11 12 14 15) |
| 319 |
> ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, |
| 320 |
> disabled. |
| 321 |
> ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, |
| 322 |
> disabled. |
| 323 |
> ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, |
| 324 |
> disabled. |
| 325 |
> ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 *10 11 12 14 15) |
| 326 |
> ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 6 7 10 11 12 14 15) |
| 327 |
> ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. |
| 328 |
> ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. |
| 329 |
> ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. |
| 330 |
> ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. |
| 331 |
> ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. |
| 332 |
> ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. |
| 333 |
> ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. |
| 334 |
> ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. |
| 335 |
> ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled. |
| 336 |
> ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. |
| 337 |
> ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. |
| 338 |
> ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. |
| 339 |
> ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. |
| 340 |
> ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. |
| 341 |
> ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled. |
| 342 |
> ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. |
| 343 |
> ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. |
| 344 |
> ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. |
| 345 |
> Linux Plug and Play Support v0.97 (c) Adam Belay |
| 346 |
> pnp: PnP ACPI init |
| 347 |
> pnp: PnP ACPI: found 11 devices |
| 348 |
> SCSI subsystem initialized |
| 349 |
> PCI: Using ACPI for IRQ routing |
| 350 |
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a |
| 351 |
> report |
| 352 |
> agpgart: Detected AGP bridge 0 |
| 353 |
> agpgart: Setting up Nforce3 AGP. |
| 354 |
> agpgart: AGP aperture is 128M @ 0xd0000000 |
| 355 |
> PCI-DMA: Disabling IOMMU. |
| 356 |
> pnp: 00:00: ioport range 0x4000-0x407f could not be reserved |
| 357 |
> pnp: 00:00: ioport range 0x4080-0x40ff has been reserved |
| 358 |
> pnp: 00:00: ioport range 0x4400-0x447f has been reserved |
| 359 |
> pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved |
| 360 |
> pnp: 00:00: ioport range 0x4800-0x487f has been reserved |
| 361 |
> pnp: 00:00: ioport range 0x4880-0x48ff has been reserved |
| 362 |
> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ |
| 363 |
> inotify device minor=63 |
| 364 |
> Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher |
| 365 |
> SGI XFS with ACLs, security attributes, realtime, large block/inode |
| 366 |
> numbers, no debug enabled |
| 367 |
> SGI XFS Quota Management subsystem |
| 368 |
> Initializing Cryptographic API |
| 369 |
> Real Time Clock Driver v1.12 |
| 370 |
> Linux agpgart interface v0.101 (c) Dave Jones |
| 371 |
> vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20000100000, using |
| 372 |
> 3072k, total 131072k |
| 373 |
> vesafb: mode is 1024x768x16, linelength=2048, pages=1 |
| 374 |
> vesafb: scrolling: redraw |
| 375 |
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 |
| 376 |
> Console: switching to colour frame buffer device 128x48 |
| 377 |
> fbsplash: console 0 using theme 'livecd-2005.1' |
| 378 |
> fbsplash: switched splash state to 'on' on console 0 |
| 379 |
> fb0: VESA VGA frame buffer device |
| 380 |
> PNP: PS/2 controller doesn't have AUX irq; using default 0xc |
| 381 |
> PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112 |
| 382 |
> serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 383 |
> serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 384 |
> Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled |
| 385 |
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 386 |
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 387 |
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 388 |
> mice: PS/2 mouse device common for all mice |
| 389 |
> io scheduler noop registered |
| 390 |
> io scheduler deadline registered |
| 391 |
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize |
| 392 |
> loop: loaded (max 8 devices) |
| 393 |
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| 394 |
> ide: Assuming 33MHz system bus speed for PIO modes; override with |
| 395 |
> idebus=xx |
| 396 |
> NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 |
| 397 |
> NFORCE3-250: chipset revision 162 |
| 398 |
> NFORCE3-250: not 100% native mode: will probe irqs later |
| 399 |
> NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. |
| 400 |
> NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller |
| 401 |
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA |
| 402 |
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA |
| 403 |
> Probing IDE interface ide0... |
| 404 |
> input: AT Translated Set 2 keyboard on isa0060/serio0 |
| 405 |
> hda: Maxtor 6Y160P0, ATA DISK drive |
| 406 |
> input: PS/2 Generic Mouse on isa0060/serio1 |
| 407 |
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
| 408 |
> Probing IDE interface ide1... |
| 409 |
> hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive |
| 410 |
> ide1 at 0x170-0x177,0x376 on irq 15 |
| 411 |
> Probing IDE interface ide2... |
| 412 |
> Probing IDE interface ide3... |
| 413 |
> Probing IDE interface ide4... |
| 414 |
> Probing IDE interface ide5... |
| 415 |
> hda: max request size: 1024KiB |
| 416 |
> hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, |
| 417 |
> UDMA(133) |
| 418 |
> hda: cache flushes supported |
| 419 |
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 > |
| 420 |
> hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) |
| 421 |
> Uniform CD-ROM driver Revision: 3.20 |
| 422 |
> NET: Registered protocol family 2 |
| 423 |
> IP: routing cache hash table of 8192 buckets, 128Kbytes |
| 424 |
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes) |
| 425 |
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 426 |
> TCP: Hash tables configured (established 262144 bind 65536) |
| 427 |
> NET: Registered protocol family 1 |
| 428 |
> NET: Registered protocol family 17 |
| 429 |
> Freeing unused kernel memory: 188k freed |
| 430 |
> usbcore: registered new driver usbfs |
| 431 |
> usbcore: registered new driver hub |
| 432 |
> ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 |
| 433 |
> ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 23 (level, |
| 434 |
> high) -> IRQ 23 |
| 435 |
> PCI: Setting latency timer of device 0000:00:02.2 to 64 |
| 436 |
> ehci_hcd 0000:00:02.2: EHCI Host Controller |
| 437 |
> ehci_hcd 0000:00:02.2: debug port 1 |
| 438 |
> ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 |
| 439 |
> ehci_hcd 0000:00:02.2: irq 23, io mem 0xe4005000 |
| 440 |
> PCI: cache line size of 64 is not supported by device 0000:00:02.2 |
| 441 |
> ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 |
| 442 |
> hub 1-0:1.0: USB hub found |
| 443 |
> hub 1-0:1.0: 8 ports detected |
| 444 |
> usbcore: registered new driver hiddev |
| 445 |
> usbcore: registered new driver usbhid |
| 446 |
> drivers/usb/input/hid-core.c: v2.01:USB HID core driver |
| 447 |
> Initializing USB Mass Storage driver... |
| 448 |
> usbcore: registered new driver usb-storage |
| 449 |
> USB Mass Storage support registered. |
| 450 |
> USB Universal Host Controller Interface driver v2.2 |
| 451 |
> ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
| 452 |
> ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 |
| 453 |
> ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, |
| 454 |
> high) -> IRQ 22 |
| 455 |
> PCI: Setting latency timer of device 0000:00:02.0 to 64 |
| 456 |
> ohci_hcd 0000:00:02.0: OHCI Host Controller |
| 457 |
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| 458 |
> ohci_hcd 0000:00:02.0: irq 22, io mem 0xe4003000 |
| 459 |
> hub 2-0:1.0: USB hub found |
| 460 |
> hub 2-0:1.0: 4 ports detected |
| 461 |
> ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 |
| 462 |
> ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, |
| 463 |
> high) -> IRQ 21 |
| 464 |
> PCI: Setting latency timer of device 0000:00:02.1 to 64 |
| 465 |
> ohci_hcd 0000:00:02.1: OHCI Host Controller |
| 466 |
> ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 |
| 467 |
> ohci_hcd 0000:00:02.1: irq 21, io mem 0xe4004000 |
| 468 |
> hub 3-0:1.0: USB hub found |
| 469 |
> hub 3-0:1.0: 4 ports detected |
| 470 |
> sl811: driver sl811-hcd, 19 May 2005 |
| 471 |
> ieee1394: Initialized config rom entry `ip1394' |
| 472 |
> ohci1394: $Rev: 1250 $ Ben Collins <bcollins@××××××.org> |
| 473 |
> ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 |
| 474 |
> ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [APC4] -> GSI 19 (level, |
| 475 |
> low) -> IRQ 19 |
| 476 |
> PCI: Via IRQ fixup for 0000:02:0c.0, from 11 to 3 |
| 477 |
> usb 2-4: new low speed USB device using ohci_hcd and address 2 |
| 478 |
> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] |
| 479 |
> MMIO=[e3001000-e30017ff] Max Packet=[2048] |
| 480 |
> sbp2: $Rev: 1219 $ Ben Collins <bcollins@××××××.org> |
| 481 |
> libata version 1.11 loaded. |
| 482 |
> sata_nv version 0.8 |
| 483 |
> ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 |
| 484 |
> ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 20 (level, |
| 485 |
> high) -> IRQ 20 |
| 486 |
> PCI: Setting latency timer of device 0000:00:09.0 to 64 |
| 487 |
> ata1: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 20 |
| 488 |
> ata2: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 20 |
| 489 |
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4773 85:7c69 86:3e01 87:4763 |
| 490 |
> 88:407f |
| 491 |
> ata1: dev 0 ATA, max UDMA/133, 586114704 sectors: lba48 |
| 492 |
> nv_sata: Primary device added |
| 493 |
> nv_sata: Primary device removed |
| 494 |
> nv_sata: Secondary device removed |
| 495 |
> ata1: dev 0 configured for UDMA/133 |
| 496 |
> scsi0 : sata_nv |
| 497 |
> ata2: no device found (phy stat 00000000) |
| 498 |
> scsi1 : sata_nv |
| 499 |
> Vendor: ATA Model: Maxtor 7V300F0 Rev: VA11 |
| 500 |
> Type: Direct-Access ANSI SCSI revision: 05 |
| 501 |
> SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) |
| 502 |
> SCSI device sda: drive cache: write back |
| 503 |
> SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) |
| 504 |
> SCSI device sda: drive cache: write back |
| 505 |
> sda: sda1 sda2 sda3 sda4 |
| 506 |
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 |
| 507 |
> ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 |
| 508 |
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, |
| 509 |
> high) -> IRQ 23 |
| 510 |
> PCI: Setting latency timer of device 0000:00:0a.0 to 64 |
| 511 |
> ata3: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE400 irq 23 |
| 512 |
> ata4: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE408 irq 23 |
| 513 |
> ata3: no device found (phy stat 00000000) |
| 514 |
> scsi2 : sata_nv |
| 515 |
> ata4: no device found (phy stat 00000000) |
| 516 |
> scsi3 : sata_nv |
| 517 |
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000677a80] |
| 518 |
> device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@××××××.com |
| 519 |
> ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find |
| 520 |
> reiserfs on hdc |
| 521 |
> VFS: Can't find ext3 filesystem on dev hdc. |
| 522 |
> VFS: Can't find an ext2 filesystem on dev hdc. |
| 523 |
> SQUASHFS error: Can't find a SQUASHFS superblock on hdc |
| 524 |
> FAT: bogus number of reserved sectors |
| 525 |
> VFS: Can't find a valid FAT filesystem on dev hdc. |
| 526 |
> ISO 9660 Extensions: Microsoft Joliet Level 3 |
| 527 |
> ISO 9660 Extensions: RRIP_1991A |
| 528 |
> drivers/usb/input/hid-core.c: timeout initializing reports |
| 529 |
> |
| 530 |
> input: USB HID v1.00 Mouse [Logitech Inc. iFeel MouseMan] on |
| 531 |
> usb-0000:00:02.0-4 |
| 532 |
> usb 3-4: new full speed USB device using ohci_hcd and address 2 |
| 533 |
> hub 3-4:1.0: USB hub found |
| 534 |
> hub 3-4:1.0: 3 ports detected |
| 535 |
> parport: PnPBIOS parport detected. |
| 536 |
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] |
| 537 |
> pnp: Device 00:09 disabled. |
| 538 |
> 8139too Fast Ethernet driver 0.9.27 |
| 539 |
> ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 |
| 540 |
> ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC2] -> GSI 17 (level, |
| 541 |
> low) -> IRQ 17 |
| 542 |
> eth0: RealTek RTL8139 at 0xffffc200000c6000, 00:c0:df:13:8f:e8, IRQ 17 |
| 543 |
> eth0: Identified 8139 chip type 'RTL-8139C' |
| 544 |
> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35. |
| 545 |
> ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 |
| 546 |
> ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 22 (level, |
| 547 |
> high) -> IRQ 22 |
| 548 |
> PCI: Setting latency timer of device 0000:00:05.0 to 64 |
| 549 |
> eth0: forcedeth.c: subsystem: 01462:0300 bound to 0000:00:05.0 |
| 550 |
> 8139too Fast Ethernet driver 0.9.27 |
| 551 |
> ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC2] -> GSI 17 (level, |
| 552 |
> low) -> IRQ 17 |
| 553 |
> eth1: RealTek RTL8139 at 0xffffc200000c8000, 00:c0:df:13:8f:e8, IRQ 17 |
| 554 |
> eth1: Identified 8139 chip type 'RTL-8139C' |
| 555 |
> dc395x: Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 |
| 556 |
> ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, |
| 557 |
> low) -> IRQ 19 |
| 558 |
> dc395x: Used settings: AdapterID=07, Speed=0(20.0MHz), dev_mode=0x77 |
| 559 |
> dc395x: AdaptMode=0x0f, Tags=4(16), DelayReset=1s |
| 560 |
> dc395x: (Wide) Connectors: Termination: Auto Low High |
| 561 |
> dc395x: Performing initial SCSI bus reset |
| 562 |
> scsi4 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 |
| 563 |
> input: PC Speaker |
| 564 |
> Floppy drive(s): fd0 is 1.44M |
| 565 |
> FDC 0 is a post-1991 82077 |
| 566 |
> pnp: Device 00:09 activated. |
| 567 |
> parport: PnPBIOS parport detected. |
| 568 |
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] |
| 569 |
> eth1: link down |
| 570 |
> kjournald starting. Commit interval 5 seconds |
| 571 |
> EXT3 FS on hda6, internal journal |
| 572 |
> EXT3-fs: mounted filesystem with ordered data mode. |
| 573 |
> |
| 574 |
|
| 575 |
-- |
| 576 |
gentoo-amd64@g.o mailing list |
Archives