public inbox for gentoo-catalyst@lists.gentoo.org
 help / color / mirror / Atom feed
* [gentoo-catalyst] Does subarch determine profile or stage3 seed?
@ 2013-12-11  7:52 lin pro
  2013-12-12 17:44 ` Rick "Zero_Chaos" Farina
  0 siblings, 1 reply; 6+ messages in thread
From: lin pro @ 2013-12-11  7:52 UTC (permalink / raw
  To: gentoo-catalyst

[-- Attachment #1: Type: text/plain, Size: 326 bytes --]

Hi, when I set the seed to be stage3-i686 and the profile to be x86/13.0
catalyst fails on my amd64 host. Can catalyst build for x86 on a amd host?
There's a message that the personality of x86 will be build but it fails at
the profile saying that the make.profile link is broken. It is not though.

Thanks for any answer
Ben

[-- Attachment #2: Type: text/html, Size: 371 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [gentoo-catalyst] Does subarch determine profile or stage3 seed?
  2013-12-11  7:52 [gentoo-catalyst] Does subarch determine profile or stage3 seed? lin pro
@ 2013-12-12 17:44 ` Rick "Zero_Chaos" Farina
  2013-12-13  5:58   ` lin pro
  0 siblings, 1 reply; 6+ messages in thread
From: Rick "Zero_Chaos" Farina @ 2013-12-12 17:44 UTC (permalink / raw
  To: gentoo-catalyst

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 12/11/2013 02:52 AM, lin pro wrote:
> Hi, when I set the seed to be stage3-i686 and the profile to be x86/13.0
> catalyst fails on my amd64 host. Can catalyst build for x86 on a amd host?
> There's a message that the personality of x86 will be build but it fails at
> the profile saying that the make.profile link is broken. It is not though.
> 
> Thanks for any answer
> Ben
> 

That's how we do the official x86 builds, and I honestly don't think
anyone is doing x86 building on an x86 host anymore.  So in short, yes,
that works fine.

We can try to help if you post your spec.

- -Zero
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=oCRQ
-----END PGP SIGNATURE-----


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [gentoo-catalyst] Does subarch determine profile or stage3 seed?
  2013-12-12 17:44 ` Rick "Zero_Chaos" Farina
@ 2013-12-13  5:58   ` lin pro
  2013-12-13  6:38     ` Matt Turner
  0 siblings, 1 reply; 6+ messages in thread
From: lin pro @ 2013-12-13  5:58 UTC (permalink / raw
  To: gentoo-catalyst

On Thu, Dec 12, 2013 at 11:44 AM, Rick "Zero_Chaos" Farina
<zerochaos@gentoo.org> wrote:
>
>
> We can try to help if you post your spec.


thank you for your reply.
Here is my spec file:  http://bpaste.net/show/158113/
And this is how it works after
catalyst -f generic_stage1_studio.spec http://bpaste.net/show/158115/


My goal is to be able to run catalyst to produce stage1, stage2,stage3
and then stage4 inn order to install
it on a intel i3. Like I mentioned before the build host is an amd:

processor       : 3
vendor_id       : AuthenticAMD
cpu family      : 18
model           : 1
model name      : AMD A8-3850 APU with Radeon(tm) HD Graphics
stepping        : 0
microcode       : 0x3000027
cpu MHz         : 2900.000
cache size      : 1024 KB
physical id     : 0
siblings        : 4
core id         : 3
cpu cores       : 4
apicid          : 3
initial apicid  : 3
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid pni cx16 popcnt lahf_lm cmp_legacy svm extapic
cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
arat hw_pstate npt lbrv svm_lock nrip_save pausefilter
bogomips        : 5800.30
TLB size        : 1536 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate



I realize that the road may be bumpy, but hey, I 've got a little bit
of patience here.
Thank you for any hints

Ben




-- 
best regards
linforpros


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [gentoo-catalyst] Does subarch determine profile or stage3 seed?
  2013-12-13  5:58   ` lin pro
@ 2013-12-13  6:38     ` Matt Turner
  2013-12-14  2:22       ` lin pro
  0 siblings, 1 reply; 6+ messages in thread
From: Matt Turner @ 2013-12-13  6:38 UTC (permalink / raw
  To: gentoo-catalyst

On Thu, Dec 12, 2013 at 9:58 PM, lin pro <linforpros@gmail.com> wrote:
> On Thu, Dec 12, 2013 at 11:44 AM, Rick "Zero_Chaos" Farina
> <zerochaos@gentoo.org> wrote:
>>
>>
>> We can try to help if you post your spec.
>
>
> thank you for your reply.
> Here is my spec file:  http://bpaste.net/show/158113/
> And this is how it works after
> catalyst -f generic_stage1_studio.spec http://bpaste.net/show/158115/
>
>
> My goal is to be able to run catalyst to produce stage1, stage2,stage3
> and then stage4 inn order to install
> it on a intel i3. Like I mentioned before the build host is an amd:
>
> processor       : 3
> vendor_id       : AuthenticAMD
> cpu family      : 18
> model           : 1
> model name      : AMD A8-3850 APU with Radeon(tm) HD Graphics
> stepping        : 0
> microcode       : 0x3000027
> cpu MHz         : 2900.000
> cache size      : 1024 KB
> physical id     : 0
> siblings        : 4
> core id         : 3
> cpu cores       : 4
> apicid          : 3
> initial apicid  : 3
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 1
> wp              : yes
> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
> fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
> nonstop_tsc extd_apicid pni cx16 popcnt lahf_lm cmp_legacy svm extapic
> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> arat hw_pstate npt lbrv svm_lock nrip_save pausefilter
> bogomips        : 5800.30
> TLB size        : 1536 4K pages
> clflush size    : 64
> cache_alignment : 64
> address sizes   : 40 bits physical, 48 bits virtual
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
>
>
> I realize that the road may be bumpy, but hey, I 've got a little bit
> of patience here.
> Thank you for any hints

> subarch: x86
> profile: default/linux/amd64/13.0

Using an amd64 profile but attempting to build a 32-bit x86 stage?


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [gentoo-catalyst] Does subarch determine profile or stage3 seed?
  2013-12-13  6:38     ` Matt Turner
@ 2013-12-14  2:22       ` lin pro
  2013-12-14  3:14         ` Rick "Zero_Chaos" Farina
  0 siblings, 1 reply; 6+ messages in thread
From: lin pro @ 2013-12-14  2:22 UTC (permalink / raw
  To: gentoo-catalyst

On Fri, Dec 13, 2013 at 12:38 AM, Matt Turner <mattst88@gentoo.org> wrote:

>
> Using an amd64 profile but attempting to build a 32-bit x86 stage?
>

Ok then,
So I was misled by the sentence on the official catalyst page about
amd64 being able to build x86 code. My thinkin was that one could mix
architectures. From what you suggest, I think, is that one may mix
architecture with a subarch within host's main architecture, like so:
amd64
           amd64, amdfam10, athlon64, athlon64-sse3, athlonfx,
barcelona, core2, k8, k8-sse3, nocona,
           opteron, opteron-sse3, x32

Anyway, I suppose I need to change the spec file to include
subarch: core2
if I want to build for intel core i3 processor, Is that correct?
And that I cannot use any subarch from within x86 when I build on a amd64 host?

Thank you for any input.
Ben
-- 
best regards
linforpros


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [gentoo-catalyst] Does subarch determine profile or stage3 seed?
  2013-12-14  2:22       ` lin pro
@ 2013-12-14  3:14         ` Rick "Zero_Chaos" Farina
  0 siblings, 0 replies; 6+ messages in thread
From: Rick "Zero_Chaos" Farina @ 2013-12-14  3:14 UTC (permalink / raw
  To: gentoo-catalyst

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 12/13/2013 09:22 PM, lin pro wrote:
> On Fri, Dec 13, 2013 at 12:38 AM, Matt Turner <mattst88@gentoo.org> wrote:
> 
>>
>> Using an amd64 profile but attempting to build a 32-bit x86 stage?
>>
> 
> Ok then,
> So I was misled by the sentence on the official catalyst page about
> amd64 being able to build x86 code. My thinkin was that one could mix
You were not mislead, you misread. Those are two different things.

You are trying to build for x86 (fine) but you declare an amd64 profile
(not fine).  Change the profile to an x86 profile and you are all set.

- -Zero

> architectures. From what you suggest, I think, is that one may mix
> architecture with a subarch within host's main architecture, like so:
> amd64
>            amd64, amdfam10, athlon64, athlon64-sse3, athlonfx,
> barcelona, core2, k8, k8-sse3, nocona,
>            opteron, opteron-sse3, x32
> 
> Anyway, I suppose I need to change the spec file to include
> subarch: core2
> if I want to build for intel core i3 processor, Is that correct?
> And that I cannot use any subarch from within x86 when I build on a amd64 host?
> 
> Thank you for any input.
> Ben
> 

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=qLIu
-----END PGP SIGNATURE-----


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2013-12-14  3:13 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-11  7:52 [gentoo-catalyst] Does subarch determine profile or stage3 seed? lin pro
2013-12-12 17:44 ` Rick "Zero_Chaos" Farina
2013-12-13  5:58   ` lin pro
2013-12-13  6:38     ` Matt Turner
2013-12-14  2:22       ` lin pro
2013-12-14  3:14         ` Rick "Zero_Chaos" Farina

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox