[gentoo-commits] repo/gentoo:master commit in: net-print/hplip/

[Daniel Pielmeier]

commit:     69a2c224189f509fc13d3e0e8adc25941a733e6d
Author:     Daniel Pielmeier <billie <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 30 16:11:30 2016 +0000
Commit:     Daniel Pielmeier <billie <AT> gentoo <DOT> org>
CommitDate: Fri Sep 30 16:11:52 2016 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=69a2c224

net-print/hplip: Remove old.

Package-Manager: portage-2.3.0

 net-print/hplip/Manifest            |   2 -
 net-print/hplip/hplip-3.16.7.ebuild | 268 ------------------------------------
 net-print/hplip/hplip-3.16.8.ebuild | 268 ------------------------------------
 3 files changed, 538 deletions(-)

diff --git a/net-print/hplip/Manifest b/net-print/hplip/Manifest
index 7f75fb5..7041391 100644
--- a/net-print/hplip/Manifest
+++ b/net-print/hplip/Manifest
@@ -3,6 +3,4 @@ DIST hplip-3.14.10.tar.gz 21773429 SHA256 11b3cd8311dea6b22a4c80be1e5d021e84d15a
 DIST hplip-3.16.2-patches-1.tar.xz 8188 SHA256 8a9a78e0caac1731eae79f047a6054b411c237c579fdfd07bc59d435db708705 SHA512 7eb03c093cfb9ef6b9a980ef5520575310d080c45ed13191933a5facaf9bbb04b38c8381762a3ecd33884ad582830e61e17b6c17f2ed7cdf910670e05eed2510 WHIRLPOOL 6721eac17977485eae0cb22b1702d0479003e3639e806ecd3c5888f1b5015a0bf904512104ebefee4b3d5f64abebd0608090e00310ec8d5b48f210c7e4a95e4e
 DIST hplip-3.16.3.tar.gz 22408596 SHA256 42d2302ee38bda41caa0f2f9524a91f531e3aa432814ffd45b3e5c396dc30194 SHA512 32d2f88c0983208e77592f73bf65cf2900cd6aa234d09220a18b45b5fc4bd0d10e9cfc8c7a10639e5a51ad5f5d0f8ed7bd477d08c86b89c633a1bbcd42682915 WHIRLPOOL b287ecf80c2e7b0da0de0afefcf60c507f9d42c74dbba1e745b4b43f253a5b0dedb6398a1f073e14d196296da47764e983138c0151e05bfc7a5dd416458662a0
 DIST hplip-3.16.5-patches-1.tar.xz 8200 SHA256 98866e57a247e7a30d9cd584ed9411aa79a6185294a73b4cc5961efe9a5e5fa6 SHA512 36d33da5fc4105183cbc5137845ddccd8ab2b6abbff053a3a51f3da61c26c2d9d48dcb735345fb453abd67b6a0797aa337102c366cce037bc7006599b20b1646 WHIRLPOOL 8ac91bdefeb177c092b1d6de16474e8e1da57ad046dbc579f14fd40a27d1837d9bf142573137ef8d91c37dc7b03ca908fd5bfad23a9815af2015b521091c2700
-DIST hplip-3.16.7.tar.gz 22872438 SHA256 9dfe0642636f2b40cb7f1c178e7ab8a794f4d0be8f75be348d1b681793f3ffc2 SHA512 68fb6748bd04809c58f0739c31487b79042f8ae89a642aa3fdcb9ee4474a319ab880c3e95b318465a70ff2ee112b576a398ef98ae3a0de45e60fba3357af6abb WHIRLPOOL 9a7a5ea51214ffd4b1604e613ccbf726ebca9cdc3ef0fe2c221611d67da9b97dcdfa01079396339e7f2382d2040f3d4e7da7782cdc5372c08a25e0c66d83f9c3
-DIST hplip-3.16.8.tar.gz 22942175 SHA256 a9da67ae51c17487a8d725eb9c0bf9c6f0416e1fffa7db6cdff5302b1c556ceb SHA512 213a39739834eca4e8b247706394cbeb6cf4ada547711d7b3e9187a43e8da8988b1b3efebdffb709cb73bc9ca863200d1405297d5797260eafae6a68531dc15f WHIRLPOOL ce6c00b8602589c7c16e6e6efb4ac47999c45f95519817f728be2bcdc1269916a5ff6e1f67a45a8f51cd16834ecdf599dfbd0ac18946aa68532b286560ba9956
 DIST hplip-3.16.9.tar.gz 23057361 SHA256 cc8cf2a7baa1403cddd6503f120c58780c786b42fad073da6caec7535d3797a6 SHA512 801bf6578759b1204eb8ede376ee0a22a12c7821ceafeb8c84a2aa5596bfccef222a15af896c33ba46c53b3e4776629efee264b6d67487cbf197b028d22b68ff WHIRLPOOL 3374e43630a39c245541180ac9e6b76431687f5b977271a4bc09cd8de897bfc992ab43ab5235bb4806da33a65d22aeb0ea2783fa52501aaafdd142e229621492

diff --git a/net-print/hplip/hplip-3.16.7.ebuild b/net-print/hplip/hplip-3.16.7.ebuild
deleted file mode 100644
index e991e1ff..00000000
--- a/net-print/hplip/hplip-3.16.7.ebuild
+++ /dev/null
@@ -1,268 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=6
-
-PYTHON_COMPAT=( python{2_7,3_3,3_4} )
-PYTHON_REQ_USE="threads,xml"
-
-inherit eutils linux-info python-single-r1 readme.gentoo-r1 udev autotools
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
-		https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde -libusb0 minimal parport policykit +qt4 qt5 scanner +snmp static-ppds X"
-
-# dependency on dev-python/notify-python dropped due to python 3 incompatibility
-# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree
-
-COMMON_DEPEND="
-	virtual/jpeg:0
-	hpijs? (
-		|| ( >=net-print/cups-filters-1.0.43-r1[foomatic] >=net-print/foomatic-filters-3.0.20080507[cups] )
-	)
-	>=net-print/cups-1.4.0
-	!minimal? (
-		${PYTHON_DEPS}
-		!libusb0? ( virtual/libusb:1 )
-		libusb0? ( virtual/libusb:0 )
-		scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
-		fax? ( >=sys-apps/dbus-1.6.8-r1 )
-		snmp? (
-			net-analyzer/net-snmp
-			dev-libs/openssl:0
-		)
-	)"
-
-DEPEND="${COMMON_DEPEND}
-	virtual/pkgconfig"
-
-RDEPEND="${COMMON_DEPEND}
-	>=app-text/ghostscript-gpl-8.71-r3
-	policykit? ( sys-auth/polkit )
-	!minimal? (
-		>=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}]
-		dev-python/pygobject[${PYTHON_USEDEP}]
-		kernel_linux? ( virtual/udev )
-		scanner? (
-			>=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}]
-			>=dev-python/pillow-3.1.1[${PYTHON_USEDEP}]
-			X? ( || (
-				kde? ( kde-misc/skanlite )
-				media-gfx/xsane
-				media-gfx/sane-frontends
-			) )
-		)
-		fax? ( >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}] )
-		qt4? ( >=dev-python/PyQt4-4.11.1[dbus,X,${PYTHON_USEDEP}] )
-		qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,${PYTHON_USEDEP}] )
-	)"
-
-REQUIRED_USE="
-	!minimal? ( ${PYTHON_REQUIRED_USE} )
-	!minimal? ( qt4? ( !qt5 ) )
-"
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-
-Any user who wants to print must be in the lp group.
-"
-
-pkg_setup() {
-	use !minimal && python-single-r1_pkg_setup
-
-	! use qt4 && ! use qt5 && ewarn "You need USE=qt4 or USE=qt5 for the hplip GUI."
-
-	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
-	if ! use hpcups && ! use hpijs ; then
-		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
-		ewarn "which is probably not what you want."
-		ewarn "You will almost certainly not be able to print."
-	fi
-
-	if use minimal ; then
-		ewarn "Installing driver portions only, make sure you know what you are doing."
-		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
-		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
-	else
-		use parport && linux-info_pkg_setup
-	fi
-}
-
-src_prepare() {
-	eapply "${WORKDIR}/patches"
-
-	default
-
-	if use !minimal ; then
-		python_export EPYTHON PYTHON
-		python_fix_shebang .
-	fi
-
-	# Make desktop files follow the specification
-	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Encoding=.*/d' hplip.desktop.in || die
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Version=.*/d' \
-		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
-	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
-	# https://bugs.launchpad.net/hplip/+bug/500086
-	local udevdir=$(get_udevdir)
-	sed -i -e "s|/etc/udev|${udevdir}|g" \
-		$(find . -type f -exec grep -l /etc/udev {} +) || die
-
-	# Force recognition of Gentoo distro by hp-check
-	sed -i \
-		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
-		installer/core_install.py || die
-
-	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
-	# The hpcups driver does not use foomatic-rip
-	local i
-	for i in ppd/hpijs/*.ppd.gz ; do
-		rm -f ${i}.temp || die
-		gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
-			gzip > ${i}.temp || die
-		mv ${i}.temp ${i} || die
-	done
-
-	eautoreconf
-}
-
-src_configure() {
-	local myconf drv_build minimal_build
-
-	if use qt4 || use qt5 ; then
-		myconf="${myconf} --enable-gui-build"
-	else
-		myconf="${myconf} --disable-gui-build"
-	fi
-
-	if use fax ||  use qt4 || use qt5 ; then
-		myconf="${myconf} --enable-dbus-build"
-	else
-		myconf="${myconf} --disable-dbus-build"
-	fi
-
-	if use libusb0 ; then
-		myconf="${myconf} --enable-libusb01_build"
-	else
-		myconf="${myconf} --disable-libusb01_build"
-	fi
-
-	if use hpcups ; then
-		drv_build="$(use_enable hpcups hpcups-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-cups-ppd-install"
-			drv_build="${drv_build} --disable-cups-drv-install"
-		else
-			drv_build="${drv_build} --enable-cups-drv-install"
-			drv_build="${drv_build} --disable-cups-ppd-install"
-		fi
-	else
-		drv_build="--disable-hpcups-install"
-		drv_build="${drv_build} --disable-cups-drv-install"
-		drv_build="${drv_build} --disable-cups-ppd-install"
-	fi
-
-	if use hpijs ; then
-		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-foomatic-ppd-install"
-			drv_build="${drv_build} --disable-foomatic-drv-install"
-		else
-			drv_build="${drv_build} --enable-foomatic-drv-install"
-			drv_build="${drv_build} --disable-foomatic-ppd-install"
-		fi
-	else
-		drv_build="${drv_build} --disable-hpijs-install"
-		drv_build="${drv_build} --disable-foomatic-drv-install"
-		drv_build="${drv_build} --disable-foomatic-ppd-install"
-	fi
-
-	if use minimal ; then
-		if use hpijs ; then
-			minimal_build="--enable-hpijs-only-build"
-		else
-			minimal_build="--disable-hpijs-only-build"
-		fi
-		if use hpcups ; then
-			minimal_build="${minimal_build} --enable-hpcups-only-build"
-		else
-			minimal_build="${minimal_build} --disable-hpcups-only-build"
-		fi
-	fi
-
-	econf \
-		--disable-cups11-build \
-		--disable-lite-build \
-		--disable-foomatic-rip-hplip-install \
-		--disable-shadow-build \
-		--disable-qt3 \
-		--disable-udev_sysfs_rules \
-		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
-		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
-		--with-docdir=/usr/share/doc/${PF} \
-		--with-htmldir=/usr/share/doc/${PF}/html \
-		${myconf} \
-		${drv_build} \
-		${minimal_build} \
-		$(use_enable doc doc-build) \
-		$(use_enable fax fax-build) \
-		$(use_enable parport pp-build) \
-		$(use_enable scanner scan-build) \
-		$(use_enable snmp network-build) \
-		$(use_enable qt4) \
-		$(use_enable qt5) \
-		$(use_enable policykit)
-}
-
-src_install() {
-	# disable parallel install
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
-	emake -j1 DESTDIR="${D}" install
-	einstalldocs
-	# default
-
-	# Installed by sane-backends
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
-	rm -f "${D}"/etc/sane.d/dll.conf || die
-
-	rm -f "${D}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
-	rmdir --ignore-fail-on-non-empty "${D}"/usr/share/doc/${PF}/ || die
-
-	# Remove hal fdi files
-	rm -rf "${D}"/usr/share/hal || die
-
-	prune_libtool_files --all
-
-	if use !minimal ; then
-		python_export EPYTHON PYTHON
-		python_optimize "${D}"/usr/share/hplip
-	fi
-
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-}

diff --git a/net-print/hplip/hplip-3.16.8.ebuild b/net-print/hplip/hplip-3.16.8.ebuild
deleted file mode 100644
index e991e1ff..00000000
--- a/net-print/hplip/hplip-3.16.8.ebuild
+++ /dev/null
@@ -1,268 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=6
-
-PYTHON_COMPAT=( python{2_7,3_3,3_4} )
-PYTHON_REQ_USE="threads,xml"
-
-inherit eutils linux-info python-single-r1 readme.gentoo-r1 udev autotools
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
-		https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde -libusb0 minimal parport policykit +qt4 qt5 scanner +snmp static-ppds X"
-
-# dependency on dev-python/notify-python dropped due to python 3 incompatibility
-# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree
-
-COMMON_DEPEND="
-	virtual/jpeg:0
-	hpijs? (
-		|| ( >=net-print/cups-filters-1.0.43-r1[foomatic] >=net-print/foomatic-filters-3.0.20080507[cups] )
-	)
-	>=net-print/cups-1.4.0
-	!minimal? (
-		${PYTHON_DEPS}
-		!libusb0? ( virtual/libusb:1 )
-		libusb0? ( virtual/libusb:0 )
-		scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
-		fax? ( >=sys-apps/dbus-1.6.8-r1 )
-		snmp? (
-			net-analyzer/net-snmp
-			dev-libs/openssl:0
-		)
-	)"
-
-DEPEND="${COMMON_DEPEND}
-	virtual/pkgconfig"
-
-RDEPEND="${COMMON_DEPEND}
-	>=app-text/ghostscript-gpl-8.71-r3
-	policykit? ( sys-auth/polkit )
-	!minimal? (
-		>=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}]
-		dev-python/pygobject[${PYTHON_USEDEP}]
-		kernel_linux? ( virtual/udev )
-		scanner? (
-			>=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}]
-			>=dev-python/pillow-3.1.1[${PYTHON_USEDEP}]
-			X? ( || (
-				kde? ( kde-misc/skanlite )
-				media-gfx/xsane
-				media-gfx/sane-frontends
-			) )
-		)
-		fax? ( >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}] )
-		qt4? ( >=dev-python/PyQt4-4.11.1[dbus,X,${PYTHON_USEDEP}] )
-		qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,${PYTHON_USEDEP}] )
-	)"
-
-REQUIRED_USE="
-	!minimal? ( ${PYTHON_REQUIRED_USE} )
-	!minimal? ( qt4? ( !qt5 ) )
-"
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-
-Any user who wants to print must be in the lp group.
-"
-
-pkg_setup() {
-	use !minimal && python-single-r1_pkg_setup
-
-	! use qt4 && ! use qt5 && ewarn "You need USE=qt4 or USE=qt5 for the hplip GUI."
-
-	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
-	if ! use hpcups && ! use hpijs ; then
-		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
-		ewarn "which is probably not what you want."
-		ewarn "You will almost certainly not be able to print."
-	fi
-
-	if use minimal ; then
-		ewarn "Installing driver portions only, make sure you know what you are doing."
-		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
-		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
-	else
-		use parport && linux-info_pkg_setup
-	fi
-}
-
-src_prepare() {
-	eapply "${WORKDIR}/patches"
-
-	default
-
-	if use !minimal ; then
-		python_export EPYTHON PYTHON
-		python_fix_shebang .
-	fi
-
-	# Make desktop files follow the specification
-	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Encoding=.*/d' hplip.desktop.in || die
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Version=.*/d' \
-		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
-	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
-	# https://bugs.launchpad.net/hplip/+bug/500086
-	local udevdir=$(get_udevdir)
-	sed -i -e "s|/etc/udev|${udevdir}|g" \
-		$(find . -type f -exec grep -l /etc/udev {} +) || die
-
-	# Force recognition of Gentoo distro by hp-check
-	sed -i \
-		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
-		installer/core_install.py || die
-
-	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
-	# The hpcups driver does not use foomatic-rip
-	local i
-	for i in ppd/hpijs/*.ppd.gz ; do
-		rm -f ${i}.temp || die
-		gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
-			gzip > ${i}.temp || die
-		mv ${i}.temp ${i} || die
-	done
-
-	eautoreconf
-}
-
-src_configure() {
-	local myconf drv_build minimal_build
-
-	if use qt4 || use qt5 ; then
-		myconf="${myconf} --enable-gui-build"
-	else
-		myconf="${myconf} --disable-gui-build"
-	fi
-
-	if use fax ||  use qt4 || use qt5 ; then
-		myconf="${myconf} --enable-dbus-build"
-	else
-		myconf="${myconf} --disable-dbus-build"
-	fi
-
-	if use libusb0 ; then
-		myconf="${myconf} --enable-libusb01_build"
-	else
-		myconf="${myconf} --disable-libusb01_build"
-	fi
-
-	if use hpcups ; then
-		drv_build="$(use_enable hpcups hpcups-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-cups-ppd-install"
-			drv_build="${drv_build} --disable-cups-drv-install"
-		else
-			drv_build="${drv_build} --enable-cups-drv-install"
-			drv_build="${drv_build} --disable-cups-ppd-install"
-		fi
-	else
-		drv_build="--disable-hpcups-install"
-		drv_build="${drv_build} --disable-cups-drv-install"
-		drv_build="${drv_build} --disable-cups-ppd-install"
-	fi
-
-	if use hpijs ; then
-		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-foomatic-ppd-install"
-			drv_build="${drv_build} --disable-foomatic-drv-install"
-		else
-			drv_build="${drv_build} --enable-foomatic-drv-install"
-			drv_build="${drv_build} --disable-foomatic-ppd-install"
-		fi
-	else
-		drv_build="${drv_build} --disable-hpijs-install"
-		drv_build="${drv_build} --disable-foomatic-drv-install"
-		drv_build="${drv_build} --disable-foomatic-ppd-install"
-	fi
-
-	if use minimal ; then
-		if use hpijs ; then
-			minimal_build="--enable-hpijs-only-build"
-		else
-			minimal_build="--disable-hpijs-only-build"
-		fi
-		if use hpcups ; then
-			minimal_build="${minimal_build} --enable-hpcups-only-build"
-		else
-			minimal_build="${minimal_build} --disable-hpcups-only-build"
-		fi
-	fi
-
-	econf \
-		--disable-cups11-build \
-		--disable-lite-build \
-		--disable-foomatic-rip-hplip-install \
-		--disable-shadow-build \
-		--disable-qt3 \
-		--disable-udev_sysfs_rules \
-		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
-		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
-		--with-docdir=/usr/share/doc/${PF} \
-		--with-htmldir=/usr/share/doc/${PF}/html \
-		${myconf} \
-		${drv_build} \
-		${minimal_build} \
-		$(use_enable doc doc-build) \
-		$(use_enable fax fax-build) \
-		$(use_enable parport pp-build) \
-		$(use_enable scanner scan-build) \
-		$(use_enable snmp network-build) \
-		$(use_enable qt4) \
-		$(use_enable qt5) \
-		$(use_enable policykit)
-}
-
-src_install() {
-	# disable parallel install
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
-	emake -j1 DESTDIR="${D}" install
-	einstalldocs
-	# default
-
-	# Installed by sane-backends
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
-	rm -f "${D}"/etc/sane.d/dll.conf || die
-
-	rm -f "${D}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
-	rmdir --ignore-fail-on-non-empty "${D}"/usr/share/doc/${PF}/ || die
-
-	# Remove hal fdi files
-	rm -rf "${D}"/usr/share/hal || die
-
-	prune_libtool_files --all
-
-	if use !minimal ; then
-		python_export EPYTHON PYTHON
-		python_optimize "${D}"/usr/share/hplip
-	fi
-
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-}