1 |
commit: eea34740b4f52893976857214bc8fba6e20a9bb1 |
2 |
Author: Mike Auty <mike.auty <AT> gmail <DOT> com> |
3 |
AuthorDate: Sat Dec 28 02:07:54 2013 +0000 |
4 |
Commit: Mike Auty <ikelos <AT> gentoo <DOT> org> |
5 |
CommitDate: Sat Dec 28 02:07:54 2013 +0000 |
6 |
URL: http://git.overlays.gentoo.org/gitweb/?p=dev/ikelos.git;a=commit;h=eea34740 |
7 |
|
8 |
Add in lirc with usbir_toy support. |
9 |
|
10 |
--- |
11 |
app-misc/lirc/Manifest | 20 + |
12 |
app-misc/lirc/files/irexec-confd | 9 + |
13 |
app-misc/lirc/files/irexec-initd | 28 + |
14 |
app-misc/lirc/files/irexec-initd-0.8.6-r2 | 28 + |
15 |
.../files/lirc-0.8.3_pre1-remotewonderplus.patch | 26 + |
16 |
.../lirc/files/lirc-0.8.4-portaudio_check.patch | 18 + |
17 |
app-misc/lirc/files/lirc-0.9.0-atiusb_kfifo.patch | 14 + |
18 |
.../files/lirc-0.9.0-kernel-2.6.39-fixes.patch | 67 ++ |
19 |
.../lirc/files/lirc-0.9.0-kernel-3.3.0-fixes.patch | 50 ++ |
20 |
.../lirc/files/lirc-0.9.0-kernel-3.5-err-fix.patch | 12 + |
21 |
app-misc/lirc/files/lirc-0.9.0-usb_irtoy.patch | 772 +++++++++++++++++++++ |
22 |
app-misc/lirc/files/lircd-0.8.3 | 23 + |
23 |
app-misc/lirc/files/lircd-0.8.6 | 41 ++ |
24 |
app-misc/lirc/files/lircd-0.8.6-r2 | 52 ++ |
25 |
app-misc/lirc/files/lircd.conf.2 | 10 + |
26 |
app-misc/lirc/files/lircd.conf.4 | 22 + |
27 |
app-misc/lirc/files/lircmd | 20 + |
28 |
app-misc/lirc/files/modprobed.lirc | 22 + |
29 |
app-misc/lirc/files/modulesd.lirc | 22 + |
30 |
app-misc/lirc/lirc-0.9.0-r3.ebuild | 428 ++++++++++++ |
31 |
20 files changed, 1684 insertions(+) |
32 |
|
33 |
diff --git a/app-misc/lirc/Manifest b/app-misc/lirc/Manifest |
34 |
new file mode 100644 |
35 |
index 0000000..8041c34 |
36 |
--- /dev/null |
37 |
+++ b/app-misc/lirc/Manifest |
38 |
@@ -0,0 +1,20 @@ |
39 |
+AUX irexec-confd 280 SHA256 c404ad3b624004cab25bd3a89593cdeb0abbc25771d6e52caf2f37cb4f7b2b79 SHA512 2b33e1044086d11fd6e1f9a204ce925182a3a2b92ef4399610e01702f9c2c8fbc87cae52961123297171eef3d40468ac17437b4281b26a5f3b256c9cebc612ac WHIRLPOOL ff0e09a0babe7f434252416f3c7d0fb27b95215c62e582c1cd4670130c48c74dcf1e565e4aa7c5705fe39f67922b0abdc28a1938a9288ef3476979bd99609377 |
40 |
+AUX irexec-initd 808 SHA256 9325419aa45d80c205bc1cd47fe839b178da74bca5dd928cbe3ae17423b92493 SHA512 6d9535cfc6469d62f2b09bc5d12ff7c792c279dab6d58d3847625ac995f20945309765c3b9781bd51dbd9d2986465f0b96818c3f4162a689807bf5e3936a4067 WHIRLPOOL be2ef1c89803a6a7c3f533c075a6a60be550d84c9b1812673d79df400305518df2b5329c6726c4aece88cf113dd2db051d1c6d6e5ea7e37e16eb463c38694690 |
41 |
+AUX irexec-initd-0.8.6-r2 816 SHA256 5e5a31fbd93294a6e210499a880fcab371b23706824c9d60d827b0187d7bade4 SHA512 b90226e8dc29ed1769275a010e0b1f5376b91d4f3cfd7bb9dd135bdee31c0f7849f31a885baafe4cbbf9f11b548712e1d78198b44252c779ffeccc5e47730054 WHIRLPOOL 00936357f3df1f63821d7da4f4452ba25a5368d4d128c088e421be2fff2e50d1a190522a9aac6712da2867e827492e674806e5871f797eacf12d333091991f96 |
42 |
+AUX lirc-0.8.3_pre1-remotewonderplus.patch 943 SHA256 547efbfa30f282ba9100495044e3b720c8f74c44f9a4e34db934d2ac7976fe29 SHA512 f1c5b03eafb8fb9d4190e438fb4ca734cac102c7f3a097f193a0a1ac7cdee33b01fb1d794959e00be16c78bb66e34d113f3ff8fb87678e99f82670ec0306e3ca WHIRLPOOL 999b01a1c2860457bf9ed68891cbb497595d58fe57627bc87d5f6401835ee5586ebcf124e1f563264ba64df22e38c7a6ccfbaf628123c5a2419bb0f57f74f19a |
43 |
+AUX lirc-0.8.4-portaudio_check.patch 769 SHA256 01e2034aaa6a7eb039e5c0e6c3b4a6ed38860614d3d0b0005d99a4aac2b3827e SHA512 a4e63da5d03f1fbb072679c3a415ae55767d601512f158c5e2fc52a045b632a055b94dca4e9d0d236ceeeb367daf22d4cc71f542229edb4fb13410512a8e4f0b WHIRLPOOL 0717efa4d7934c9736b220ec4416d1827397267b34bc3343a16a5963729fcfaa4871bb4e47b1aebbb310ea5bcc2bfaa7c675a451f5db46d979f0e4438e84a37e |
44 |
+AUX lirc-0.9.0-atiusb_kfifo.patch 437 SHA256 b7950ee185588a3626b8024cb22c0e67c8514362f5c9cb74bfcead8018e11b02 SHA512 d072ecd94ed4b7f1662441106650b7eb329cbe62887819c1e607ae87375a17dedea02a3a5dcf6956a1151743fd652ec5884577c595771740eef509daab8dbd02 WHIRLPOOL f0013dd75d6cf3486cddbea4e97e7ca9962af882befc5e994f258d1eb5e77e09379c4ca246e407f4c7ad5438b860e0e3b0abb2cade6f04b101525f060188ed03 |
45 |
+AUX lirc-0.9.0-kernel-2.6.39-fixes.patch 2175 SHA256 f5f48c867716288835a73b8d29aa9b1fcc4905a723e1f99e35fe396b2c759957 SHA512 a502b815cec565a49382e9ad0e7237a9bc7da431f41e94db42d214655577212606500ea2651a298db8cd3a68ce706461e6a773b0d9e3316ac7d49b2038fda354 WHIRLPOOL f1968f51cc29ce4f630c59c964d106e024f4cb3e5938ea80b271800a65d130a42531db5fe6e220ae20577cd4f1998de09e5dbdf52ff1cf6f3839922dd9ece114 |
46 |
+AUX lirc-0.9.0-kernel-3.3.0-fixes.patch 1545 SHA256 f02e7b3c52dd17e179b6f89afc15f5eec2889a18f1df4523df680fbf50adb584 SHA512 75743844d7fe61a91174c1d7ee78a229e347659a35d1062a704c39e424d8a433efac4216a0b840282c38a4f2f22baa7a489c1c0402a40f734e7475992046a2ae WHIRLPOOL 871523dc5a9757d170b740acd9845b0ba42c4c5c4c5fdc71b5c701cefa2f6122cf1cb6171698e6bf2e605d93f052d15371657f5c1901794819ca2c3eded2ec1f |
47 |
+AUX lirc-0.9.0-kernel-3.5-err-fix.patch 326 SHA256 171f03c8d93e60b86caec6027c303797028f57bc99cd37e6ccb65ef074f5de35 SHA512 c3a6e802b140595155a7ae8dc695bc13e4d6147323949a8dc9c86857bf7abcd442339eac64f99869925c308a100bfb1b7b0eb715f086afb8997252164ff079df WHIRLPOOL aa849092798c5e1335336d4de86139b5c545c8ffa899a92182f9a010e0c1e28d8e3dfca8e3d71bf2aee874c52dd237b8b10f9d514e7dce571b634b6cb1d4bd15 |
48 |
+AUX lirc-0.9.0-usb_irtoy.patch 19871 SHA256 17af4972d3194476314d3f10c8997a04734139b7245dd6cd9b2be27dcd03fbc8 SHA512 30fba8e5e4d2604b10d15029a7f46dd6dc9f71b12f949a5fbd44c3f5030f098c4fab892bf649a0bd168ae5e64ead280aae7cbd0fe67562377b5d31409939d9ad WHIRLPOOL 1969843afa953713e2d44f6758bc1fdebdcfbd28d5623c3aad9febf3ce8fb71e725d184a657838a823abadfb6541558f360457c5f86b41a646a7675e8f44fe80 |
49 |
+AUX lircd-0.8.3 581 SHA256 9ba3c5a8c0ca5966729dc5e2c7a5960bbf12b443d91e9e319a0277f153df1b1f SHA512 d0f652df31fa1583232e3b29b5fc95d21fc76564df9f5e54881ee849c7a6fa0d697f15335c2e3f1b8ab0b29b7cddef605bd15073f394c29df9e5704854b0017a WHIRLPOOL 69c23cc6584ec435ce50689df223b27244a8deda351dbf048646f05021eba6893c22be24e167930cbb786f15e79cbfa97cf335de8b311ff9543c0e50a853a503 |
50 |
+AUX lircd-0.8.6 973 SHA256 473cf04b2f6addf7c86d23103b1eff68bf3758fda2bf25401ff0631c568c7805 SHA512 9992b629073d9d9c05388b6063d1a7eff6a47514ccc1af2739638c8375b284cd6252c1a825d172d160acee9983f7bd59fdde6dd282c62597e8d6d7a149f06f69 WHIRLPOOL ccb99a3df8e52f3b6abeddebd727aa734c547fafb3db19b4fd266fc7f69d0b0674f937a21bb11d8d338d59c019d870797715993eb781de1f15f4bef1cfe9927d |
51 |
+AUX lircd-0.8.6-r2 1317 SHA256 40d1b609e54327d40e0f4314e31ea58aa029bf95f9f27f311da1260fef2fa416 SHA512 c896b229c6b025d4f2cc3684c0905b83e8e6663f11f35fc705636445846f069cbe6ea1b03bd2e7dab136b0d4895ad35b2b940d713caee3204a97bc8c8080c2f3 WHIRLPOOL dda8fdee434778dcefb90778485845e1c7f724e292d6d11c26c5ac951b232b1bc87b75faa236c48bc3ffd4abb68b74bacbb5564173215c8d944906c542eaa232 |
52 |
+AUX lircd.conf.2 317 SHA256 694d96ffc0c5b8d258592d89c0221aa9b10d69ce024a69a0cc935d899e0b855e SHA512 59779104301e96b377999aad9980f2a915ee9d817e0ba33c172602ea868b49450cd198fe26cf6da4dd8690684768f4d5cd6132a66fec5fea486fbd7a5a8c3a7b WHIRLPOOL 353f5e9e17a831bc124124316f043063ee9c4a13f29f44cf66d236cfcd7d30e756392f18ad761343c723e0e4079541638d1ea7b921074e75a8449f0a5388d179 |
53 |
+AUX lircd.conf.4 699 SHA256 d36ff77fa193a065d25e373723e03f1a9471205151b82c73a6574cce4f095962 SHA512 1fb1778f4cc72fc9c11b13a704b3abe80bcce5b3770b69b6b6bea8571e5293adad8c6968779b812e611b67734462c9a577cc71c6b16da3a5bfe31b8007300a62 WHIRLPOOL c9d3b5845b4d395abed932f4553808c0eff66f2be2b6d6ab302c98b11eb2ffc0fcd752e2862982896a4c935425ae03a545cdeb4a6c0da91141d1622178263053 |
54 |
+AUX lircmd 466 SHA256 d47f22a33a83c14a4a0c333d6a445c40e550c491899fb0c6d323e23fe1eac7b7 SHA512 d3cf896f1a2229a51670d5c658c04d5c0aa078a3f8ea15211d655f8883366f9d4102e93941a75957ab3095faa5f598fb1242bfd03f534bb8af134f542d077c6e WHIRLPOOL 39880900b60f44277f41db990841620deefae03f2698122949038187a36631a14e90dba07323e5bf9b6e14cf05f28fe5a3b944ee802e56286ccbf58194ab3d35 |
55 |
+AUX modprobed.lirc 549 SHA256 b4951252321ea326d3ec401e5ff1112716c5aaf5b2ca94d9f5e187e22ad35c44 SHA512 a64cac97e21ab53c247d8dd3e518b3caee5eeb9c3558727eba8a04684894c6be1695ce681e71d559474f4e78bbb39130d97f843eae18e56b3d3eb70f1fbefc63 WHIRLPOOL a45ec8b3cd725f9b4c6b991cf6d4fec7869a07911a2ac82535dca665a0dd99a66b40d85faf0beea780001e9260a8a17c1ccec880c05a271a138c1e0501f7727c |
56 |
+AUX modulesd.lirc 482 SHA256 3906b61951e1245cb3c9b16e81255a735f7bcdbbfcbedcdf44cd53236e2a3f28 SHA512 07ae7c7288878f65857962bb3a343b83d58eca6447299253dd297dec6443b95d89f46ebcbe1f1ac66ec5062f8134a2e19ecc3ce397b2f8d0d27f203a2a103fcc WHIRLPOOL 2bc4c45d3fd314cc88d50f79974b2aafa4e55a7df7383cbd2f3ddf5b66e144b5700f8d411f79ea458caec0da3e47d5e0db2c34e1efcc2d748c473fe2c5ae7389 |
57 |
+DIST lirc-0.9.0.tar.bz2 857286 SHA256 6323afae6ad498d4369675f77ec3dbb680fe661bea586aa296e67f2e2daba4ff SHA512 e91534c63e6065bd7da3b15e1676edf1672b8beb21864a6825df86247d7d165bf2dee6f8191732933e24e42a406e46afc55559948e4061eed2de7b08fac13431 WHIRLPOOL 0a1c00b07898aa7a5d78865fb73c6d26c6331dd0a4945773a801d29e40298b365eb58cae113a95fcf73be678a24ac082ad0868e8051303d732882fb82a859a7b |
58 |
+EBUILD lirc-0.9.0-r3.ebuild 13125 SHA256 68fdce2db53886851756fc834b764381cfdccec1e98cb1c9a27753f67a7afb0e SHA512 df5ec27b6398d2820205076010b07f28b3a0169c04e9c331f9f4fe563715c1acd7334bdd5afb4a690c78b04baf224c24adb7ef67ab2f300069fa0de36a886d78 WHIRLPOOL 81d2835d949120d832da43f807bbd06ec980cba7a8006a00b2a853c89b841d027e6ebc7609951d1dfc72ff17203cde7121fb1712859c6bbc74f545f81f6ef500 |
59 |
|
60 |
diff --git a/app-misc/lirc/files/irexec-confd b/app-misc/lirc/files/irexec-confd |
61 |
new file mode 100644 |
62 |
index 0000000..48eb8dd |
63 |
--- /dev/null |
64 |
+++ b/app-misc/lirc/files/irexec-confd |
65 |
@@ -0,0 +1,9 @@ |
66 |
+# Options to pass to the irexec process |
67 |
+IREXEC_OPTS="/etc/lircrc" |
68 |
+ |
69 |
+# User to execute irexec as. |
70 |
+# Warning: Running irexec as root can open security holes |
71 |
+#IREXEC_USER="root" |
72 |
+ |
73 |
+# Use this to disable the warning printed when starting irexec as root |
74 |
+# IREXEC_DISABLE_ROOT_WARNING=yes |
75 |
|
76 |
diff --git a/app-misc/lirc/files/irexec-initd b/app-misc/lirc/files/irexec-initd |
77 |
new file mode 100755 |
78 |
index 0000000..e1defee |
79 |
--- /dev/null |
80 |
+++ b/app-misc/lirc/files/irexec-initd |
81 |
@@ -0,0 +1,28 @@ |
82 |
+#!/sbin/runscript |
83 |
+# Copyright 2003 Martin Hierling <mad@×××××××××××.de> |
84 |
+# Distributed under the terms of the GNU General Public License v2 |
85 |
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/files/irexec-initd,v 1.3 2007/05/24 20:12:16 zzam Exp $ |
86 |
+ |
87 |
+: ${IREXEC_USER:=root} |
88 |
+ |
89 |
+depend() { |
90 |
+ need lircd |
91 |
+} |
92 |
+ |
93 |
+start() { |
94 |
+ if [ "x${IREXEC_USER}" = "xroot" -a "x${IREXEC_DISABLE_ROOT_WARNING}" != "xyes" ]; then |
95 |
+ ewarn "Warning: Running irexec as root can open security holes" |
96 |
+ fi |
97 |
+ |
98 |
+ ebegin "Starting irexec" |
99 |
+ start-stop-daemon --start --chuid ${IREXEC_USER} --user ${IREXEC_USER} --chdir / \ |
100 |
+ --exec /usr/bin/irexec -- --daemon ${IREXEC_OPTS} |
101 |
+ eend $? "Failed to start irexec." |
102 |
+} |
103 |
+ |
104 |
+stop() { |
105 |
+ ebegin "Stopping irexec" |
106 |
+ start-stop-daemon --stop --exec /usr/bin/irexec --user ${IREXEC_USER} |
107 |
+ eend $? "Failed to stop irexec." |
108 |
+} |
109 |
+ |
110 |
|
111 |
diff --git a/app-misc/lirc/files/irexec-initd-0.8.6-r2 b/app-misc/lirc/files/irexec-initd-0.8.6-r2 |
112 |
new file mode 100755 |
113 |
index 0000000..567322a |
114 |
--- /dev/null |
115 |
+++ b/app-misc/lirc/files/irexec-initd-0.8.6-r2 |
116 |
@@ -0,0 +1,28 @@ |
117 |
+#!/sbin/runscript |
118 |
+# Copyright 2003 Martin Hierling <mad@×××××××××××.de> |
119 |
+# Distributed under the terms of the GNU General Public License v2 |
120 |
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/files/irexec-initd-0.8.6-r2,v 1.1 2009/11/15 10:04:21 zzam Exp $ |
121 |
+ |
122 |
+: ${IREXEC_USER:=root} |
123 |
+ |
124 |
+depend() { |
125 |
+ need lirc |
126 |
+} |
127 |
+ |
128 |
+start() { |
129 |
+ if [ "x${IREXEC_USER}" = "xroot" -a "x${IREXEC_DISABLE_ROOT_WARNING}" != "xyes" ]; then |
130 |
+ ewarn "Warning: Running irexec as root can open security holes" |
131 |
+ fi |
132 |
+ |
133 |
+ ebegin "Starting irexec" |
134 |
+ start-stop-daemon --start --chuid ${IREXEC_USER} --user ${IREXEC_USER} --chdir / \ |
135 |
+ --exec /usr/bin/irexec -- --daemon ${IREXEC_OPTS} |
136 |
+ eend $? "Failed to start irexec." |
137 |
+} |
138 |
+ |
139 |
+stop() { |
140 |
+ ebegin "Stopping irexec" |
141 |
+ start-stop-daemon --stop --exec /usr/bin/irexec --user ${IREXEC_USER} |
142 |
+ eend $? "Failed to stop irexec." |
143 |
+} |
144 |
+ |
145 |
|
146 |
diff --git a/app-misc/lirc/files/lirc-0.8.3_pre1-remotewonderplus.patch b/app-misc/lirc/files/lirc-0.8.3_pre1-remotewonderplus.patch |
147 |
new file mode 100644 |
148 |
index 0000000..66527bc |
149 |
--- /dev/null |
150 |
+++ b/app-misc/lirc/files/lirc-0.8.3_pre1-remotewonderplus.patch |
151 |
@@ -0,0 +1,26 @@ |
152 |
+--- lirc-0.8.0/drivers/lirc_atiusb/lirc_atiusb.c.orig 2005-10-29 08:18:53.000000000 -0600 |
153 |
++++ lirc-0.8.0/drivers/lirc_atiusb/lirc_atiusb.c 2006-04-01 14:31:05.000000000 -0700 |
154 |
+@@ -147,8 +147,9 @@ |
155 |
+ /* init strings */ |
156 |
+ #define USB_OUTLEN 7 |
157 |
+ |
158 |
+-static char init1[] = {0x01, 0x00, 0x20, 0x14}; |
159 |
+-static char init2[] = {0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20}; |
160 |
++static char init1[] = {0x80, 0x05, 0x1b, 0x15, 0x14, 0x20, 0x24, 0x15}; |
161 |
++static char init2[] = {0x83, 0x03}; |
162 |
++static char init3[] = {0x84, 0xd7, 0x020}; |
163 |
+ |
164 |
+ struct in_endpt { |
165 |
+ /* inner link in list of endpoints for the remote specified by ir */ |
166 |
+@@ -1034,8 +1034,9 @@ |
167 |
+ usb_sndintpipe(ir->usbdev, oep->ep->bEndpointAddress), oep->buf, |
168 |
+ USB_OUTLEN, usb_remote_send, oep, oep->ep->bInterval); |
169 |
+ |
170 |
+- send_packet(oep, 0x8004, init1); |
171 |
+- send_packet(oep, 0x8007, init2); |
172 |
++ send_packet(oep, 0x8007, init1); |
173 |
++ send_packet(oep, 0x8002, init2); |
174 |
++ send_packet(oep, 0x8003, init3); |
175 |
+ } |
176 |
+ } |
177 |
+ |
178 |
|
179 |
diff --git a/app-misc/lirc/files/lirc-0.8.4-portaudio_check.patch b/app-misc/lirc/files/lirc-0.8.4-portaudio_check.patch |
180 |
new file mode 100644 |
181 |
index 0000000..36f5f36 |
182 |
--- /dev/null |
183 |
+++ b/app-misc/lirc/files/lirc-0.8.4-portaudio_check.patch |
184 |
@@ -0,0 +1,18 @@ |
185 |
+Portaudio is only needed for LIRC_DEVICES=audio, so not checking for Portaudio when the device is disabled will prevent automagic dependencies. |
186 |
+--- configure.ac.orig 2009-03-13 10:02:50.000000000 +0100 |
187 |
++++ configure.ac 2009-03-13 10:04:00.000000000 +0100 |
188 |
+@@ -336,14 +336,6 @@ |
189 |
+ AC_DEFINE(HAVE_LIBIRMAN_SW) |
190 |
+ possible_drivers="${possible_drivers} (irman_sw)" |
191 |
+ ) |
192 |
+-dnl audio driver requires PortAudio library installed and some linker flags |
193 |
+-AC_CHECK_HEADERS(portaudio.h,[ |
194 |
+- AC_CHECK_LIB(portaudio, Pa_Initialize,[ |
195 |
+- AC_DEFINE(HAVE_LIBPORTAUDIO) |
196 |
+- possible_drivers="${possible_drivers} (audio)" |
197 |
+- ],,${portaudio_lib_other} |
198 |
+- )] |
199 |
+-) |
200 |
+ dnl audio_alsa driver requires ALSA library installed and some linker flags |
201 |
+ have_alsa=no |
202 |
+ AC_CHECK_HEADERS(alsa/asoundlib.h,[ |
203 |
|
204 |
diff --git a/app-misc/lirc/files/lirc-0.9.0-atiusb_kfifo.patch b/app-misc/lirc/files/lirc-0.9.0-atiusb_kfifo.patch |
205 |
new file mode 100644 |
206 |
index 0000000..32edb24 |
207 |
--- /dev/null |
208 |
+++ b/app-misc/lirc/files/lirc-0.9.0-atiusb_kfifo.patch |
209 |
@@ -0,0 +1,14 @@ |
210 |
+--- a/drivers/lirc_atiusb/lirc_atiusb.c 2012-07-17 16:04:39.000000000 -0400 |
211 |
++++ b/drivers/lirc_atiusb/lirc_atiusb.c 2012-07-17 16:19:06.000000000 -0400 |
212 |
+@@ -1050,7 +1050,11 @@ |
213 |
+ goto new_irctl_failure_check; |
214 |
+ } |
215 |
+ |
216 |
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 38) |
217 |
+ if (lirc_buffer_init(driver->rbuf, dclen, 1)) { |
218 |
++#else |
219 |
++ if (lirc_buffer_init(driver->rbuf, dclen, 2)) { |
220 |
++#endif |
221 |
+ mem_failure = 4; |
222 |
+ goto new_irctl_failure_check; |
223 |
+ } |
224 |
|
225 |
diff --git a/app-misc/lirc/files/lirc-0.9.0-kernel-2.6.39-fixes.patch b/app-misc/lirc/files/lirc-0.9.0-kernel-2.6.39-fixes.patch |
226 |
new file mode 100644 |
227 |
index 0000000..6247370 |
228 |
--- /dev/null |
229 |
+++ b/app-misc/lirc/files/lirc-0.9.0-kernel-2.6.39-fixes.patch |
230 |
@@ -0,0 +1,67 @@ |
231 |
+diff -u a/drivers/lirc_atiusb/lirc_atiusb.c b/drivers/lirc_atiusb/lirc_atiusb.c |
232 |
+--- a/drivers/lirc_atiusb/lirc_atiusb.c |
233 |
++++ b/drivers/lirc_atiusb/lirc_atiusb.c |
234 |
+@@ -48,7 +48,9 @@ |
235 |
+ #include <linux/slab.h> |
236 |
+ #include <linux/module.h> |
237 |
+ #include <linux/kmod.h> |
238 |
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) |
239 |
+ #include <linux/smp_lock.h> |
240 |
++#endif |
241 |
+ #include <linux/completion.h> |
242 |
+ #include <linux/uaccess.h> |
243 |
+ #include <linux/usb.h> |
244 |
+diff -u a/drivers/lirc_i2c/lirc_i2c.c b/drivers/lirc_i2c/lirc_i2c.c |
245 |
+--- a/drivers/lirc_i2c/lirc_i2c.c |
246 |
++++ b/drivers/lirc_i2c/lirc_i2c.c |
247 |
+@@ -555,8 +555,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) |
248 |
+ kfree(ir); |
249 |
+ return -EINVAL; |
250 |
+ } |
251 |
+- printk(KERN_INFO "lirc_i2c: chip 0x%x found @ 0x%02x (%s)\n", |
252 |
+- adap->id, addr, ir->c.name); |
253 |
++ printk(KERN_INFO "lirc_i2c: chip found @ 0x%02x (%s)\n", |
254 |
++ addr, ir->c.name); |
255 |
+ |
256 |
+ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 31) |
257 |
+ /* register device */ |
258 |
+diff -u a/drivers/lirc_wpc8769l/lirc_wpc8769l.c b/drivers/lirc_wpc8769l/lirc_wpc8769l.c |
259 |
+--- a/drivers/lirc_wpc8769l/lirc_wpc8769l.c |
260 |
++++ b/drivers/lirc_wpc8769l/lirc_wpc8769l.c |
261 |
+@@ -361,14 +361,22 @@ static irqreturn_t irq_handler(int irqno, void *blah, struct pt_regs *regs) |
262 |
+ size = count << 3; |
263 |
+ |
264 |
+ ldata = (unsigned long *) data_buf; |
265 |
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) |
266 |
+ next_one = generic_find_next_le_bit(ldata, size, 0); |
267 |
++#else |
268 |
++ next_one = find_next_zero_bit_le(ldata, size, 0); |
269 |
++#endif |
270 |
+ |
271 |
+ if (next_one > 0) |
272 |
+ put_pulse_bit(next_one |
273 |
+ * WPC8769L_USECS_PER_BIT); |
274 |
+ |
275 |
+ while (next_one < size) { |
276 |
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) |
277 |
+ next_zero = generic_find_next_zero_le_bit(ldata, |
278 |
++#else |
279 |
++ next_zero = find_next_zero_bit_le(ldata, |
280 |
++#endif |
281 |
+ size, next_one + 1); |
282 |
+ |
283 |
+ put_space_bit( |
284 |
+@@ -376,7 +384,11 @@ static irqreturn_t irq_handler(int irqno, void *blah, struct pt_regs *regs) |
285 |
+ * WPC8769L_USECS_PER_BIT); |
286 |
+ |
287 |
+ if (next_zero < size) { |
288 |
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) |
289 |
+ next_one = generic_find_next_le_bit(ldata, |
290 |
++#else |
291 |
++ next_one = find_next_bit_le(ldata, |
292 |
++#endif |
293 |
+ size, next_zero + 1); |
294 |
+ |
295 |
+ put_pulse_bit( |
296 |
+-- |
297 |
+1.7.5.4 |
298 |
|
299 |
diff --git a/app-misc/lirc/files/lirc-0.9.0-kernel-3.3.0-fixes.patch b/app-misc/lirc/files/lirc-0.9.0-kernel-3.3.0-fixes.patch |
300 |
new file mode 100644 |
301 |
index 0000000..9b7d3ef |
302 |
--- /dev/null |
303 |
+++ b/app-misc/lirc/files/lirc-0.9.0-kernel-3.3.0-fixes.patch |
304 |
@@ -0,0 +1,50 @@ |
305 |
+diff -ur drivers/lirc_serial/lirc_serial.c drivers.new/lirc_serial/lirc_serial.c |
306 |
+--- drivers/lirc_serial/lirc_serial.c 2011-03-25 18:28:18.000000000 -0400 |
307 |
++++ drivers.new/lirc_serial/lirc_serial.c 2012-10-24 14:32:14.000000000 -0400 |
308 |
+@@ -66,7 +66,12 @@ |
309 |
+ #include <linux/poll.h> |
310 |
+ #include <linux/platform_device.h> |
311 |
+ |
312 |
++#include "drivers/kcompat.h" |
313 |
++#if LINUX_VERSION_CODE > KERNEL_VERSION(3, 3, 0) |
314 |
++#include <asm/switch_to.h> |
315 |
++#else |
316 |
+ #include <asm/system.h> |
317 |
++#endif |
318 |
+ #include <linux/io.h> |
319 |
+ #include <linux/irq.h> |
320 |
+ #include <linux/fcntl.h> |
321 |
+@@ -80,7 +85,6 @@ |
322 |
+ #define UART_IE_IXP42X_UUE 0x40 /* IXP42X UART Unit enable */ |
323 |
+ #define UART_IE_IXP42X_RTOIE 0x10 /* IXP42X Receiver Data Timeout int.enable */ |
324 |
+ |
325 |
+-#include "drivers/kcompat.h" |
326 |
+ #if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35) |
327 |
+ #include <media/lirc.h> |
328 |
+ #include <media/lirc_dev.h> |
329 |
+diff -ur drivers/lirc_sir/lirc_sir.c drivers.new/lirc_sir/lirc_sir.c |
330 |
+--- drivers/lirc_sir/lirc_sir.c 2011-03-25 18:28:18.000000000 -0400 |
331 |
++++ drivers.new/lirc_sir/lirc_sir.c 2012-10-24 14:32:46.000000000 -0400 |
332 |
+@@ -59,7 +59,14 @@ |
333 |
+ #include <linux/mm.h> |
334 |
+ #include <linux/delay.h> |
335 |
+ #include <linux/poll.h> |
336 |
++ |
337 |
++#include "drivers/kcompat.h" |
338 |
++#if LINUX_VERSION_CODE > KERNEL_VERSION(3, 3, 0) |
339 |
++#include <asm/switch_to.h> |
340 |
++#else |
341 |
+ #include <asm/system.h> |
342 |
++#endif |
343 |
++ |
344 |
+ #include <linux/io.h> |
345 |
+ #include <asm/irq.h> |
346 |
+ #include <linux/fcntl.h> |
347 |
+@@ -74,7 +81,6 @@ |
348 |
+ |
349 |
+ #include <linux/timer.h> |
350 |
+ |
351 |
+-#include "drivers/kcompat.h" |
352 |
+ #if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35) |
353 |
+ #include <media/lirc.h> |
354 |
+ #include <media/lirc_dev.h> |
355 |
|
356 |
diff --git a/app-misc/lirc/files/lirc-0.9.0-kernel-3.5-err-fix.patch b/app-misc/lirc/files/lirc-0.9.0-kernel-3.5-err-fix.patch |
357 |
new file mode 100644 |
358 |
index 0000000..b06d94e |
359 |
--- /dev/null |
360 |
+++ b/app-misc/lirc/files/lirc-0.9.0-kernel-3.5-err-fix.patch |
361 |
@@ -0,0 +1,12 @@ |
362 |
+--- a/drivers/kcompat.h 2011-03-25 18:28:18.000000000 -0400 |
363 |
++++ b/drivers/kcompat.h 2012-11-27 13:37:55.000000000 -0500 |
364 |
+@@ -136,4 +136,9 @@ |
365 |
+ ) |
366 |
+ #endif |
367 |
+ |
368 |
++#ifndef err |
369 |
++#define err(format, arg...) \ |
370 |
++ printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg) |
371 |
++#endif |
372 |
++ |
373 |
+ #endif /* _KCOMPAT_H */ |
374 |
|
375 |
diff --git a/app-misc/lirc/files/lirc-0.9.0-usb_irtoy.patch b/app-misc/lirc/files/lirc-0.9.0-usb_irtoy.patch |
376 |
new file mode 100644 |
377 |
index 0000000..80991b3 |
378 |
--- /dev/null |
379 |
+++ b/app-misc/lirc/files/lirc-0.9.0-usb_irtoy.patch |
380 |
@@ -0,0 +1,772 @@ |
381 |
+diff --git c/configure.ac w/configure.ac |
382 |
+index 052908b..2cd46ff 100644 |
383 |
+--- c/configure.ac |
384 |
++++ w/configure.ac |
385 |
+@@ -154,6 +154,7 @@ possible_drivers="(none) \ |
386 |
+ (uirt2) \ |
387 |
+ (uirt2_raw) \ |
388 |
+ (usb_uirt_raw) \ |
389 |
++ (usb_irtoy) \ |
390 |
+ (usbx) \ |
391 |
+ (udp)" |
392 |
+ |
393 |
+@@ -446,7 +447,7 @@ AC_ARG_WITH(driver, |
394 |
+ srm7500libusb, tekram, |
395 |
+ tekram_bt829, tira, tira_raw, ttusbir, |
396 |
+ tuxbox, tvbox, udp, uirt2, uirt2_raw, |
397 |
+- usb_uirt_raw, usbx, wpc8769l], |
398 |
++ usb_uirt_raw, usb_irtoy, usbx, wpc8769l], |
399 |
+ driver=${withval}, |
400 |
+ driver="unset" |
401 |
+ ) |
402 |
+@@ -680,6 +681,9 @@ if test "$driver" = "userspace" -o "$driver" = "all"; then |
403 |
+ uirt2_raw|usb_uirt_raw) |
404 |
+ hw_module="${hw_module} hw_uirt2_raw.o hw_uirt2_common.o serial.o receive.o transmit.o" |
405 |
+ ;; |
406 |
++ usb_irtoy) |
407 |
++ hw_module="${hw_module} hw_usbirtoy.o serial.o receive.o transmit.o" |
408 |
++ ;; |
409 |
+ usbx) |
410 |
+ hw_module="${hw_module} hw_usbx.o serial.o" |
411 |
+ ;; |
412 |
+@@ -1391,6 +1395,11 @@ if test "$driver" = "uirt2_raw"; then |
413 |
+ hw_module="hw_uirt2_raw.o hw_uirt2_common.o serial.o receive.o transmit.o" |
414 |
+ HW_DEFAULT="hw_uirt2_raw" |
415 |
+ fi |
416 |
++if test "$driver" = "usb_irtoy"; then |
417 |
++ lirc_driver="none" |
418 |
++ hw_module="hw_usbirtoy.o serial.o receive.o transmit.o" |
419 |
++ HW_DEFAULT="hw_usbirtoy" |
420 |
++fi |
421 |
+ if test "$driver" = "usb_uirt_raw"; then |
422 |
+ lirc_driver="none" |
423 |
+ hw_module="hw_uirt2_raw.o hw_uirt2_common.o serial.o receive.o transmit.o" |
424 |
+diff --git c/daemons/hw-types.c w/daemons/hw-types.c |
425 |
+index 0536ea2..b11cbdf 100644 |
426 |
+--- c/daemons/hw-types.c |
427 |
++++ w/daemons/hw-types.c |
428 |
+@@ -58,6 +58,7 @@ extern struct hardware hw_udp; |
429 |
+ extern struct hardware hw_uirt2; |
430 |
+ extern struct hardware hw_uirt2_raw; |
431 |
+ extern struct hardware hw_usb_uirt_raw; |
432 |
++extern struct hardware hw_usbirtoy; |
433 |
+ extern struct hardware hw_usbx; |
434 |
+ |
435 |
+ #ifndef HW_DEFAULT |
436 |
+diff --git c/daemons/hw_usbirtoy.c w/daemons/hw_usbirtoy.c |
437 |
+new file mode 100644 |
438 |
+index 0000000..ed2df85 |
439 |
+--- /dev/null |
440 |
++++ w/daemons/hw_usbirtoy.c |
441 |
+@@ -0,0 +1,607 @@ |
442 |
++/**************************************************************************** |
443 |
++ ** hw_usbirtoy.c ********************************************************** |
444 |
++ **************************************************************************** |
445 |
++ * |
446 |
++ * Routines for USB Infrared Toy receiver/transmitter in sampling mode |
447 |
++ * |
448 |
++ * Copyright (C) 2011 Peter Kooiman <pkooiman@×××××.com> |
449 |
++ * |
450 |
++ * This program is free software; you can redistribute it and/or modify |
451 |
++ * it under the terms of the GNU General Public License as published by |
452 |
++ * the Free Software Foundation; either version 2 of the License, or |
453 |
++ * (at your option) any later version. |
454 |
++ * |
455 |
++ * This program is distributed in the hope that it will be useful, |
456 |
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of |
457 |
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
458 |
++ * GNU Library General Public License for more details. |
459 |
++ * |
460 |
++ * You should have received a copy of the GNU General Public License |
461 |
++ * along with this program; if not, write to the Free Software |
462 |
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
463 |
++ */ |
464 |
++ |
465 |
++#ifdef HAVE_CONFIG_H |
466 |
++ #include <config.h> |
467 |
++#endif |
468 |
++ |
469 |
++ |
470 |
++#include <stdio.h> |
471 |
++#include <stdlib.h> |
472 |
++#include <stdarg.h> |
473 |
++#include <fcntl.h> |
474 |
++#include <unistd.h> |
475 |
++#include <limits.h> |
476 |
++#include <signal.h> |
477 |
++#include <sys/stat.h> |
478 |
++#include <sys/types.h> |
479 |
++#include <sys/ioctl.h> |
480 |
++#include <errno.h> |
481 |
++ |
482 |
++ |
483 |
++#include "hardware.h" |
484 |
++#include "serial.h" |
485 |
++#include "ir_remote.h" |
486 |
++#include "lircd.h" |
487 |
++#include "receive.h" |
488 |
++#include "transmit.h" |
489 |
++ |
490 |
++#define IRTOY_MINFWVERSION 20 |
491 |
++ |
492 |
++#define IRTOY_UNIT 21.3333 |
493 |
++#define IRTOY_LONGSPACE 1000000 |
494 |
++ |
495 |
++ |
496 |
++const unsigned char IRTOY_COMMAND_TXSTART[] = {0x24, 0x25, 0x26, 0x03}; |
497 |
++#define IRTOY_COMMAND_RESET 0 |
498 |
++#define IRTOY_COMMAND_SMODE_ENTER 's' |
499 |
++#define IRTOY_COMMAND_VERSION 'v' |
500 |
++ |
501 |
++#define IRTOY_REPLY_XMITCOUNT 't' |
502 |
++#define IRTOY_REPLY_XMITSUCCESS 'C' |
503 |
++#define IRTOY_REPLY_VERSION 'V' |
504 |
++#define IRTOY_REPLY_SAMPLEMODEPROTO 'S' |
505 |
++ |
506 |
++#define IRTOY_LEN_XMITRES 4 |
507 |
++#define IRTOY_LEN_VERSION 4 |
508 |
++#define IRTOY_LEN_SAMPLEMODEPROTO 3 |
509 |
++ |
510 |
++#define IRTOY_TIMEOUT_READYFORDATA 1000000 |
511 |
++#define IRTOY_TIMEOUT_FLUSH 20000 |
512 |
++#define IRTOY_TIMEOUT_SMODE_ENTER 500000 |
513 |
++#define IRTOY_TIMEOUT_VERSION 500000 |
514 |
++ |
515 |
++ |
516 |
++struct tag_irtoy_t { |
517 |
++ int hwVersion; |
518 |
++ int swVersion; |
519 |
++ int protoVersion; |
520 |
++ int fd; |
521 |
++ int awaitingNewSig; |
522 |
++ int pulse; |
523 |
++}; |
524 |
++ |
525 |
++typedef struct tag_irtoy_t irtoy_t; |
526 |
++ |
527 |
++static irtoy_t *dev; |
528 |
++ |
529 |
++unsigned char rawSB[WBUF_SIZE * 2 + 2]; |
530 |
++ |
531 |
++/* exported functions */ |
532 |
++static int irtoy_init(void); |
533 |
++static int irtoy_deinit(void); |
534 |
++static int irtoy_send(struct ir_remote *remote, struct ir_ncode *code); |
535 |
++static char *irtoy_rec(struct ir_remote *remotes); |
536 |
++static int irtoy_decode(struct ir_remote *remote, ir_code * prep, ir_code * codep, ir_code * postp, |
537 |
++ int *repeat_flagp, lirc_t * min_remaining_gapp, lirc_t * max_remaining_gapp); |
538 |
++static lirc_t irtoy_readdata(lirc_t timeout); |
539 |
++ |
540 |
++ |
541 |
++struct hardware hw_usbirtoy = { |
542 |
++#ifndef LIRC_IRTTY |
543 |
++ "/dev/ttyACM0", |
544 |
++#else |
545 |
++ LIRC_IRTTY, /* default device */ |
546 |
++#endif |
547 |
++ -1, /* fd */ |
548 |
++ LIRC_CAN_REC_MODE2 | LIRC_CAN_SEND_PULSE, /* features */ |
549 |
++ LIRC_MODE_PULSE, /* send_mode */ |
550 |
++ LIRC_MODE_MODE2, /* rec_mode */ |
551 |
++ 0, /* code_length */ |
552 |
++ irtoy_init, /* init_func */ |
553 |
++ irtoy_deinit, /* deinit_func */ |
554 |
++ irtoy_send, /* send_func */ |
555 |
++ irtoy_rec, /* rec_func */ |
556 |
++ irtoy_decode, /* decode_func */ |
557 |
++ NULL, /* ioctl_func */ |
558 |
++ irtoy_readdata, /* readdata */ |
559 |
++ "usb_irtoy" |
560 |
++}; |
561 |
++ |
562 |
++ |
563 |
++static int irtoy_decode(struct ir_remote *remote, ir_code * prep, ir_code * codep, ir_code * postp, |
564 |
++ int *repeat_flagp, lirc_t * min_remaining_gapp, lirc_t * max_remaining_gapp) |
565 |
++{ |
566 |
++ int res; |
567 |
++ |
568 |
++ LOGPRINTF(1, "irtoy_decode: enter"); |
569 |
++ |
570 |
++ res = receive_decode(remote, prep, codep, postp, repeat_flagp, min_remaining_gapp, max_remaining_gapp); |
571 |
++ |
572 |
++ LOGPRINTF(1, "irtoy_decode: %d", res); |
573 |
++ |
574 |
++ return res; |
575 |
++} |
576 |
++ |
577 |
++ |
578 |
++ |
579 |
++ |
580 |
++static ssize_t read_with_timeout(int fd, void *buf, size_t count, long to_usec) |
581 |
++{ |
582 |
++ ssize_t rc; |
583 |
++ size_t numread = 0; |
584 |
++ struct timeval timeout; |
585 |
++ fd_set fds; |
586 |
++ |
587 |
++ timeout.tv_sec = 0; |
588 |
++ timeout.tv_usec = to_usec; |
589 |
++ |
590 |
++ rc = read(fd, (char *) buf, count); |
591 |
++ |
592 |
++ if (rc > 0) { |
593 |
++ numread += rc; |
594 |
++ } |
595 |
++ |
596 |
++ while ((rc == -1 && errno == EAGAIN) || (rc >= 0 && numread < count)) { |
597 |
++ FD_ZERO(&fds); |
598 |
++ FD_SET(fd, &fds); |
599 |
++ |
600 |
++ rc = select(fd + 1, &fds, NULL, NULL, &timeout); |
601 |
++ |
602 |
++ if (rc == 0) { |
603 |
++ /* timeout */ |
604 |
++ break; |
605 |
++ } else if (rc == -1) { |
606 |
++ /* continue for EAGAIN case */ |
607 |
++ continue; |
608 |
++ } |
609 |
++ |
610 |
++ rc = read(fd, ((char *)buf) + numread, count - numread); |
611 |
++ |
612 |
++ if (rc > 0) { |
613 |
++ numread += rc; |
614 |
++ } |
615 |
++ |
616 |
++ } |
617 |
++ |
618 |
++ return(numread == 0) ? -1 : numread; |
619 |
++} |
620 |
++ |
621 |
++ |
622 |
++static int irtoy_readflush(irtoy_t * dev, long timeout) |
623 |
++{ |
624 |
++ int res; |
625 |
++ char c; |
626 |
++ |
627 |
++ while ((res = read_with_timeout(dev->fd, &c, 1, timeout)) == 1) |
628 |
++ ; |
629 |
++ |
630 |
++ if (res != 0) |
631 |
++ return -1; |
632 |
++ else |
633 |
++ return 0; |
634 |
++} |
635 |
++ |
636 |
++static lirc_t irtoy_read(irtoy_t * dev, lirc_t timeout) |
637 |
++{ |
638 |
++ |
639 |
++ lirc_t data; |
640 |
++ int res; |
641 |
++ unsigned char dur[2]; |
642 |
++ |
643 |
++ if (!waitfordata(timeout)) |
644 |
++ return 0; |
645 |
++ |
646 |
++ // lircd expects a space as start of the next transmission, not just at the end of the last one |
647 |
++ // irrecord however likes to see a space at the end of the signal |
648 |
++ // We remember if we saw the 0xFFFF timeout from the usbtoy and send a long space both after last signal and at start of next signal |
649 |
++ // From usb irtoy: <signal...><lastpulse> [usbtoy timeout duration] 0xFFFF [however long it takes before next signal] <firstpulse><signal..> |
650 |
++ // We return: <signal><lastpulse> [usbtoy timeout duration] LONGSPACE [however long it takes before next signal] LONGSPACE <firstpulse><signal> |
651 |
++ if (dev->awaitingNewSig) { |
652 |
++ |
653 |
++ LOGPRINTF(1, "new signal after large space"); |
654 |
++ dev->pulse = 1; |
655 |
++ dev->awaitingNewSig = 0; |
656 |
++ return IRTOY_LONGSPACE; |
657 |
++ } |
658 |
++ |
659 |
++ res = read_with_timeout(dev->fd, dur, 2, 0); |
660 |
++ |
661 |
++ if (res != 2) { |
662 |
++ logprintf(LOG_ERR, "irtoy_read: could not get 2 bytes"); |
663 |
++ return 0; |
664 |
++ } |
665 |
++ |
666 |
++ |
667 |
++ |
668 |
++ LOGPRINTF(3, "read_raw %02x%02x", dur[0], dur[1]); |
669 |
++ |
670 |
++ |
671 |
++ if (dur[0] == 0xff && dur[1] == 0xff) { |
672 |
++ dev->awaitingNewSig = 1; |
673 |
++ return IRTOY_LONGSPACE; |
674 |
++ } |
675 |
++ |
676 |
++ |
677 |
++ data = (lirc_t) (IRTOY_UNIT * (double) (256 * dur[0] + dur[1])); |
678 |
++ |
679 |
++ LOGPRINTF(3, "read_raw %d", data); |
680 |
++ |
681 |
++ |
682 |
++ if (dev->pulse) { |
683 |
++ data = data | PULSE_BIT; |
684 |
++ } |
685 |
++ |
686 |
++ dev->pulse = ! (dev->pulse); |
687 |
++ |
688 |
++ |
689 |
++ return data; |
690 |
++} |
691 |
++ |
692 |
++static lirc_t irtoy_readdata(lirc_t timeout) |
693 |
++{ |
694 |
++ lirc_t data = irtoy_read(dev, timeout); |
695 |
++ |
696 |
++ if (data) { |
697 |
++ LOGPRINTF(1, "irtoy_readdata %d %d", !!(data & PULSE_BIT), data & PULSE_MASK); |
698 |
++ |
699 |
++ } |
700 |
++ |
701 |
++ return(data); |
702 |
++} |
703 |
++ |
704 |
++static int irtoy_getversion(irtoy_t *dev) |
705 |
++{ |
706 |
++ int res; |
707 |
++ unsigned char buf[16]; |
708 |
++ int vNum; |
709 |
++ |
710 |
++ irtoy_readflush(dev, IRTOY_TIMEOUT_FLUSH); |
711 |
++ |
712 |
++ |
713 |
++ buf[0] = IRTOY_COMMAND_VERSION; |
714 |
++ res = write(dev->fd, buf, 1); |
715 |
++ |
716 |
++ if (res != 1) { |
717 |
++ logprintf(LOG_ERR, "irtoy_getversion: couldn't write command"); |
718 |
++ return 0; |
719 |
++ } |
720 |
++ |
721 |
++ |
722 |
++ res = read_with_timeout(dev->fd, buf, IRTOY_LEN_VERSION, IRTOY_TIMEOUT_VERSION); |
723 |
++ |
724 |
++ if (res != IRTOY_LEN_VERSION) { |
725 |
++ logprintf(LOG_ERR, "irtoy_getversion: couldn't read version"); |
726 |
++ logprintf(LOG_ERR, "please make sure you are using firmware v20 or higher"); |
727 |
++ return 0; |
728 |
++ } |
729 |
++ |
730 |
++ buf[IRTOY_LEN_VERSION] = 0; |
731 |
++ |
732 |
++ LOGPRINTF(1, "irtoy_getversion: Got version %s", buf); |
733 |
++ |
734 |
++ if (buf[0] != IRTOY_REPLY_VERSION) { |
735 |
++ logprintf(LOG_ERR, "irtoy_getversion: invalid response %02X", buf[0]); |
736 |
++ logprintf(LOG_ERR, "please make sure you are using firmware v20 or higher"); |
737 |
++ return 0; |
738 |
++ } |
739 |
++ |
740 |
++ vNum = atoi(buf + 1); |
741 |
++ dev->hwVersion = vNum / 100; |
742 |
++ dev->swVersion = vNum % 100; |
743 |
++ return 1; |
744 |
++} |
745 |
++ |
746 |
++static int irtoy_reset(irtoy_t *dev) |
747 |
++{ |
748 |
++ int res; |
749 |
++ unsigned char buf[16]; |
750 |
++ |
751 |
++ buf[0] = IRTOY_COMMAND_RESET; |
752 |
++ res = write(dev->fd, buf, 1); |
753 |
++ |
754 |
++ if (res != 1) { |
755 |
++ logprintf(LOG_ERR, "irtoy_reset: couldn't write command"); |
756 |
++ return 0; |
757 |
++ } |
758 |
++ |
759 |
++ irtoy_readflush(dev, IRTOY_TIMEOUT_FLUSH); |
760 |
++ |
761 |
++ return 1; |
762 |
++} |
763 |
++ |
764 |
++static int irtoy_enter_samplemode(irtoy_t *dev) |
765 |
++{ |
766 |
++ |
767 |
++ int res; |
768 |
++ unsigned char buf[16]; |
769 |
++ |
770 |
++ buf[0] = IRTOY_COMMAND_SMODE_ENTER; |
771 |
++ res = write(dev->fd, buf, 1); |
772 |
++ |
773 |
++ if (res != 1) { |
774 |
++ logprintf(LOG_ERR, "irtoy_enter_samplemode: couldn't write command"); |
775 |
++ return 0; |
776 |
++ } |
777 |
++ |
778 |
++ |
779 |
++ res = read_with_timeout(dev->fd, buf, IRTOY_LEN_SAMPLEMODEPROTO, IRTOY_TIMEOUT_SMODE_ENTER); |
780 |
++ |
781 |
++ if (res != IRTOY_LEN_SAMPLEMODEPROTO) { |
782 |
++ logprintf(LOG_ERR, "irtoy_enter_samplemode: couldn't read command result"); |
783 |
++ return 0; |
784 |
++ } |
785 |
++ |
786 |
++ buf[IRTOY_LEN_SAMPLEMODEPROTO] = 0; |
787 |
++ |
788 |
++ if (buf[0] != IRTOY_REPLY_SAMPLEMODEPROTO) { |
789 |
++ logprintf(LOG_ERR, "irtoy_enter_samplemode: invalid response %02X", buf[0]); |
790 |
++ return 0; |
791 |
++ } |
792 |
++ |
793 |
++ |
794 |
++ LOGPRINTF(1, "irtoy_reset: Got protocol %s", buf); |
795 |
++ |
796 |
++ dev->protoVersion = atoi(buf + 1); |
797 |
++ return 1; |
798 |
++} |
799 |
++ |
800 |
++ |
801 |
++static irtoy_t *irtoy_hw_init(int fd) |
802 |
++{ |
803 |
++ |
804 |
++ |
805 |
++ irtoy_t *dev = (irtoy_t *) malloc(sizeof(irtoy_t)); |
806 |
++ |
807 |
++ if (dev == NULL) { |
808 |
++ logprintf(LOG_ERR, "irtoy_init: out of memory"); |
809 |
++ return NULL; |
810 |
++ } |
811 |
++ |
812 |
++ memset(dev, 0, sizeof(irtoy_t)); |
813 |
++ |
814 |
++ dev->awaitingNewSig = 1; |
815 |
++ dev->fd = fd; |
816 |
++ dev->pulse = 1; |
817 |
++ |
818 |
++ irtoy_readflush(dev, IRTOY_TIMEOUT_FLUSH); |
819 |
++ |
820 |
++ if (!irtoy_reset(dev) || !irtoy_getversion(dev) || !irtoy_enter_samplemode(dev)) { |
821 |
++ free(dev); |
822 |
++ dev = NULL; |
823 |
++ return NULL; |
824 |
++ } |
825 |
++ |
826 |
++ return dev; |
827 |
++} |
828 |
++ |
829 |
++ |
830 |
++ |
831 |
++ |
832 |
++static int irtoy_init(void) |
833 |
++{ |
834 |
++ |
835 |
++ |
836 |
++ |
837 |
++ if (!tty_create_lock(hw.device)) { |
838 |
++ logprintf(LOG_ERR, "usb_irtoy: could not create lock files"); |
839 |
++ return(0); |
840 |
++ } |
841 |
++ |
842 |
++ if ((hw.fd = open(hw.device, O_RDWR | O_NONBLOCK | O_NOCTTY)) < 0) { |
843 |
++ logprintf(LOG_ERR, "usb_irtoy: could not open %s", hw.device); |
844 |
++ tty_delete_lock(); |
845 |
++ return(0); |
846 |
++ } |
847 |
++ |
848 |
++ if (!tty_reset(hw.fd)) { |
849 |
++ logprintf(LOG_ERR, "usb_irtoy: could not reset tty"); |
850 |
++ close(hw.fd); |
851 |
++ tty_delete_lock(); |
852 |
++ return(0); |
853 |
++ } |
854 |
++ |
855 |
++ |
856 |
++ if (!tty_setbaud(hw.fd, 115200)) { |
857 |
++ logprintf(LOG_ERR, "usb_irtoy: could not set baud rate"); |
858 |
++ close(hw.fd); |
859 |
++ tty_delete_lock(); |
860 |
++ return(0); |
861 |
++ } |
862 |
++ |
863 |
++ if (!tty_setcsize(hw.fd, 8)) { |
864 |
++ logprintf(LOG_ERR, "usb_irtoy: could not set csize"); |
865 |
++ close(hw.fd); |
866 |
++ tty_delete_lock(); |
867 |
++ return(0); |
868 |
++ } |
869 |
++ |
870 |
++ if (!tty_setrtscts(hw.fd, 1)) { |
871 |
++ logprintf(LOG_ERR, "usb_irtoy: could not enable hardware flow"); |
872 |
++ close(hw.fd); |
873 |
++ tty_delete_lock(); |
874 |
++ return(0); |
875 |
++ } |
876 |
++ |
877 |
++ if ((dev = irtoy_hw_init(hw.fd)) == NULL) { |
878 |
++ logprintf(LOG_ERR, "usb_irtoy: No USB Irtoy device found at %s", hw.device); |
879 |
++ close(hw.fd); |
880 |
++ tty_delete_lock(); |
881 |
++ return(0); |
882 |
++ } |
883 |
++ |
884 |
++ LOGPRINTF(1, "Version hw %d, sw %d, protocol %d\n", dev->hwVersion, dev->swVersion, dev->protoVersion); |
885 |
++ |
886 |
++ if (dev->swVersion < IRTOY_MINFWVERSION) { |
887 |
++ logprintf(LOG_ERR, "usb_irtoy: Need firmware V%02d or higher, this firmware: %02d", IRTOY_MINFWVERSION, dev->swVersion); |
888 |
++ free(dev); |
889 |
++ return 0; |
890 |
++ } |
891 |
++ |
892 |
++ init_rec_buffer(); |
893 |
++ init_send_buffer(); |
894 |
++ |
895 |
++ |
896 |
++ |
897 |
++ return(1); |
898 |
++} |
899 |
++ |
900 |
++static int irtoy_deinit(void) |
901 |
++{ |
902 |
++ |
903 |
++ // IMPORTANT do not remove this reset. it is vital to return the irtoy to IRMAN mode. |
904 |
++ // If we leave the irtoy in sample mode while no-one has the tty open, the linux cdc_acm driver will fail on the next open. |
905 |
++ // This is apparently due to data being sent while the tty is not open and fairly well known (google for "tty_port_close_start: tty->count = 1 port count = 0") |
906 |
++ // IRMAN mode will wait until a signal is actually read before sending the next one, while sample mode will keep streaming (and under fluorescent light it WILL stream..) |
907 |
++ // triggering the problem |
908 |
++ irtoy_reset(dev); |
909 |
++ |
910 |
++ free(dev); |
911 |
++ dev = NULL; |
912 |
++ |
913 |
++ |
914 |
++ close(hw.fd); |
915 |
++ hw.fd = -1; |
916 |
++ tty_delete_lock(); |
917 |
++ return 1; |
918 |
++} |
919 |
++ |
920 |
++static char *irtoy_rec(struct ir_remote *remotes) |
921 |
++{ |
922 |
++ LOGPRINTF(1, "irtoy_raw_rec"); |
923 |
++ |
924 |
++ |
925 |
++ if (!clear_rec_buffer()) |
926 |
++ return(NULL); |
927 |
++ |
928 |
++ return decode_all(remotes); |
929 |
++ |
930 |
++ |
931 |
++} |
932 |
++ |
933 |
++static int irtoy_send_double_buffered(unsigned char * signals, int length) |
934 |
++{ |
935 |
++ int numToXmit = length; |
936 |
++ int numThisTime; |
937 |
++ int res; |
938 |
++ unsigned char irToyBufLen; |
939 |
++ unsigned char *txPtr; |
940 |
++ unsigned char reply[16]; |
941 |
++ int irtoyXmit; |
942 |
++ |
943 |
++ |
944 |
++ res = write(dev->fd, IRTOY_COMMAND_TXSTART, sizeof(IRTOY_COMMAND_TXSTART)); |
945 |
++ |
946 |
++ if (res != sizeof(IRTOY_COMMAND_TXSTART)) { |
947 |
++ logprintf(LOG_ERR, "irtoy_send: couldn't write command"); |
948 |
++ return 0; |
949 |
++ } |
950 |
++ |
951 |
++ res = read_with_timeout(dev->fd, &irToyBufLen, 1, IRTOY_TIMEOUT_READYFORDATA); |
952 |
++ |
953 |
++ if (res != 1) { |
954 |
++ logprintf(LOG_ERR, "irtoy_send: couldn't read command result"); |
955 |
++ return -1; |
956 |
++ } |
957 |
++ |
958 |
++ LOGPRINTF(1, "irtoy ready for %d bytes\n", irToyBufLen); |
959 |
++ |
960 |
++ txPtr = signals; |
961 |
++ |
962 |
++ while (numToXmit) { |
963 |
++ numThisTime = (numToXmit < irToyBufLen) ? numToXmit : irToyBufLen; |
964 |
++ res = write(dev->fd, txPtr, numThisTime); |
965 |
++ |
966 |
++ if (res != numThisTime) { |
967 |
++ logprintf(LOG_ERR, "irtoy_send: couldn't write command"); |
968 |
++ return 0; |
969 |
++ } |
970 |
++ |
971 |
++ txPtr += numThisTime; |
972 |
++ numToXmit -= numThisTime; |
973 |
++ |
974 |
++ |
975 |
++ res = read_with_timeout(dev->fd, &irToyBufLen, 1, IRTOY_TIMEOUT_READYFORDATA); |
976 |
++ |
977 |
++ if (res != 1) { |
978 |
++ logprintf(LOG_ERR, "irtoy_send: couldn't read command result"); |
979 |
++ return -1; |
980 |
++ } |
981 |
++ |
982 |
++ LOGPRINTF(1, "irtoy ready for %d bytes\n", irToyBufLen); |
983 |
++ |
984 |
++ |
985 |
++ } |
986 |
++ |
987 |
++ |
988 |
++ res = read_with_timeout(dev->fd, reply, IRTOY_LEN_XMITRES, IRTOY_TIMEOUT_READYFORDATA); |
989 |
++ |
990 |
++ if (res != IRTOY_LEN_XMITRES) { |
991 |
++ logprintf(LOG_ERR, "irtoy_send: couldn't read command result"); |
992 |
++ return -1; |
993 |
++ } |
994 |
++ |
995 |
++ LOGPRINTF(1, "%c %02X %02X %c\n", reply[0], reply[1], reply[2], reply[3]); |
996 |
++ |
997 |
++ if (reply[0] != IRTOY_REPLY_XMITCOUNT) { |
998 |
++ logprintf(LOG_ERR, "irtoy_send: invalid byte count indicator received: %02X", reply[0]); |
999 |
++ return 0; |
1000 |
++ } |
1001 |
++ |
1002 |
++ irtoyXmit = (reply[1] << 8) | reply[2]; |
1003 |
++ if (length != irtoyXmit) { |
1004 |
++ logprintf(LOG_ERR, "irtoy_send: incorrect byte count received: %d expected: %d", irtoyXmit, length); |
1005 |
++ return 0; |
1006 |
++ } |
1007 |
++ |
1008 |
++ if (reply[3] != IRTOY_REPLY_XMITSUCCESS) { |
1009 |
++ logprintf(LOG_ERR, "irtoy_send: received error status %02X", reply[3]); |
1010 |
++ return 0; |
1011 |
++ } |
1012 |
++ |
1013 |
++ return 1; |
1014 |
++ |
1015 |
++} |
1016 |
++ |
1017 |
++static int irtoy_send(struct ir_remote *remote, struct ir_ncode *code) |
1018 |
++{ |
1019 |
++ int length; |
1020 |
++ lirc_t *signals; |
1021 |
++ int res = 0; |
1022 |
++ |
1023 |
++ int numToXmit; |
1024 |
++ int i; |
1025 |
++ lirc_t val; |
1026 |
++ |
1027 |
++ |
1028 |
++ if (!init_send(remote, code)) { |
1029 |
++ return 0; |
1030 |
++ } |
1031 |
++ |
1032 |
++ length = send_buffer.wptr; |
1033 |
++ signals = send_buffer.data; |
1034 |
++ |
1035 |
++ for (i = 0; i < length; i++) { |
1036 |
++ val = (lirc_t)(((double) signals[i]) / IRTOY_UNIT); |
1037 |
++ rawSB[2*i] = val >> 8; |
1038 |
++ rawSB[2*i + 1] = val & 0xFF; |
1039 |
++ } |
1040 |
++ |
1041 |
++ rawSB[2 * length] = 0xFF; |
1042 |
++ rawSB[2 * length + 1] = 0xFF; |
1043 |
++ |
1044 |
++ numToXmit = 2 * length + 2; |
1045 |
++ return irtoy_send_double_buffered(rawSB, numToXmit); |
1046 |
++} |
1047 |
++ |
1048 |
++ |
1049 |
+diff --git c/setup.data w/setup.data |
1050 |
+index 407d6b2..99be615 100644 |
1051 |
+--- c/setup.data |
1052 |
++++ w/setup.data |
1053 |
+@@ -119,6 +119,7 @@ hw_menu_entry: @hw-usb |
1054 |
+ awlibusb: "Awox RF/IR Remote (userspace)" |
1055 |
+ sb0540: "Creative USB IR Receiver (SB0540)" |
1056 |
+ commandir: "CommandIR Multi-IR Transceiver (userspace)" |
1057 |
++ usb_irtoy: "Dangerous Prototypes USB Infrared Toy" |
1058 |
+ dfclibusb: "DFC USB InfraRed Remote Control (userspace)" |
1059 |
+ sasem: "Dign HV5 HTPC IR/VFD Module" |
1060 |
+ dvico: "DViCO USB Remote" |
1061 |
+@@ -147,6 +148,7 @@ hw_menu_entry: @hw-usb |
1062 |
+ mplay: "VLSystem MPlay Blast" |
1063 |
+ mplay: "VLSystem MPlay Mini" |
1064 |
+ |
1065 |
++ |
1066 |
+ param_type: \ |
1067 |
+ act200l \ |
1068 |
+ act220l \ |
1069 |
+@@ -190,6 +192,9 @@ param_type: \ |
1070 |
+ usbx |
1071 |
+ ttyUSB: |
1072 |
+ |
1073 |
++param_type: usb_irtoy |
1074 |
++ ttyACM: |
1075 |
++ |
1076 |
+ param_type: \ |
1077 |
+ adaptec \ |
1078 |
+ alsa_usb \ |
1079 |
+@@ -390,6 +395,10 @@ default_param: \ |
1080 |
+ usbx |
1081 |
+ ttyUSB1: |
1082 |
+ |
1083 |
++default_param: usb_irtoy |
1084 |
++ ttyACM1: |
1085 |
++ |
1086 |
++ |
1087 |
+ remote: \ |
1088 |
+ hauppauge \ |
1089 |
+ hauppauge_dvb \ |
1090 |
+@@ -424,6 +433,7 @@ remote: \ |
1091 |
+ ttusbir \ |
1092 |
+ uirt2_raw \ |
1093 |
+ udp \ |
1094 |
++ usb_irtoy \ |
1095 |
+ usb_uirt_raw \ |
1096 |
+ wpc8769l |
1097 |
+ any: |
1098 |
+diff --git c/setup.sh w/setup.sh |
1099 |
+index 342f32d..a3546b5 100755 |
1100 |
+--- c/setup.sh |
1101 |
++++ w/setup.sh |
1102 |
+@@ -65,6 +65,10 @@ GetSelectedDriver () |
1103 |
+ elif test "$DRIVER_PARAMETER" = "ttyUSB2"; then COM2="on"; IRTTY="/dev/ttyUSB1"; LIRC_PORT="none"; LIRC_IRQ="none" |
1104 |
+ elif test "$DRIVER_PARAMETER" = "ttyUSB3"; then COM3="on"; IRTTY="/dev/ttyUSB2"; LIRC_PORT="none"; LIRC_IRQ="none" |
1105 |
+ elif test "$DRIVER_PARAMETER" = "ttyUSB4"; then COM4="on"; IRTTY="/dev/ttyUSB3"; LIRC_PORT="none"; LIRC_IRQ="none" |
1106 |
++ elif test "$DRIVER_PARAMETER" = "ttyACM1"; then COM1="on"; IRTTY="/dev/ttyACM0"; LIRC_PORT="none"; LIRC_IRQ="none" |
1107 |
++ elif test "$DRIVER_PARAMETER" = "ttyACM2"; then COM2="on"; IRTTY="/dev/ttyACM1"; LIRC_PORT="none"; LIRC_IRQ="none" |
1108 |
++ elif test "$DRIVER_PARAMETER" = "ttyACM3"; then COM3="on"; IRTTY="/dev/ttyACM2"; LIRC_PORT="none"; LIRC_IRQ="none" |
1109 |
++ elif test "$DRIVER_PARAMETER" = "ttyACM4"; then COM4="on"; IRTTY="/dev/ttyACM3"; LIRC_PORT="none"; LIRC_IRQ="none" |
1110 |
+ elif test "$DRIVER_PARAMETER" = "com1"; then COM1="on"; LIRC_PORT=$COM1_PORT; LIRC_IRQ=$COM1_IRQ |
1111 |
+ elif test "$DRIVER_PARAMETER" = "com2"; then COM2="on"; LIRC_PORT=$COM2_PORT; LIRC_IRQ=$COM2_IRQ |
1112 |
+ elif test "$DRIVER_PARAMETER" = "com3"; then COM3="on"; LIRC_PORT=$COM3_PORT; LIRC_IRQ=$COM3_IRQ |
1113 |
+@@ -207,6 +211,30 @@ SetPortAndIrq () |
1114 |
+ else |
1115 |
+ return 1; |
1116 |
+ fi |
1117 |
++ elif test "$DRIVER_PARAM_TYPE" = "ttyACM"; then |
1118 |
++ { |
1119 |
++ dialog --clear --backtitle "$BACKTITLE" \ |
1120 |
++ --title "Select tty to use" \ |
1121 |
++ --radiolist "$SET_TTY_TEXT" 13 74 6 \ |
1122 |
++ 1 "/dev/ttyACM0" $COM1 \ |
1123 |
++ 2 "/dev/ttyACM1" $COM2 \ |
1124 |
++ 3 "/dev/ttyACM2" $COM3 \ |
1125 |
++ 4 "/dev/ttyACM3" $COM4 \ |
1126 |
++ 2> $TEMP |
1127 |
++ } |
1128 |
++ if test "$?" = "0"; then |
1129 |
++ { |
1130 |
++ set `cat $TEMP` |
1131 |
++ if test "$1" = "1"; then DRIVER_PARAMETER="ttyACM1" |
1132 |
++ elif test "$1" = "2"; then DRIVER_PARAMETER="ttyACM2" |
1133 |
++ elif test "$1" = "3"; then DRIVER_PARAMETER="ttyACM3" |
1134 |
++ elif test "$1" = "4"; then DRIVER_PARAMETER="ttyACM4" |
1135 |
++ fi |
1136 |
++ GetSelectedDriver |
1137 |
++ } |
1138 |
++ else |
1139 |
++ return 1; |
1140 |
++ fi |
1141 |
+ fi |
1142 |
+ return 0; |
1143 |
+ } |
1144 |
+@@ -347,7 +375,7 @@ SaveConfig () |
1145 |
+ else echo "--without-timer \\" >>$START; |
1146 |
+ fi |
1147 |
+ } |
1148 |
+- elif test "$DRIVER_PARAM_TYPE" = "tty" -o "$DRIVER_PARAM_TYPE" = "ttyUSB" -o "$LIRC_DRIVER" = "bte"; then |
1149 |
++ elif test "$DRIVER_PARAM_TYPE" = "tty" -o "$DRIVER_PARAM_TYPE" = "ttyUSB" -o "$DRIVER_PARAM_TYPE" = "ttyACM" -o "$LIRC_DRIVER" = "bte"; then |
1150 |
+ { |
1151 |
+ echo "--with-tty=$IRTTY \\" >>$START |
1152 |
+ } |
1153 |
|
1154 |
diff --git a/app-misc/lirc/files/lircd-0.8.3 b/app-misc/lirc/files/lircd-0.8.3 |
1155 |
new file mode 100644 |
1156 |
index 0000000..8cd7a0a |
1157 |
--- /dev/null |
1158 |
+++ b/app-misc/lirc/files/lircd-0.8.3 |
1159 |
@@ -0,0 +1,23 @@ |
1160 |
+#!/sbin/runscript |
1161 |
+# Copyright 1999-2004 Gentoo Foundation |
1162 |
+# Distributed under the terms of the GNU General Public License v2 |
1163 |
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/files/lircd-0.8.3,v 1.1 2008/05/05 09:53:19 zzam Exp $ |
1164 |
+ |
1165 |
+PIDFILE=/var/run/${SVCNAME}.pid |
1166 |
+ |
1167 |
+depend() { |
1168 |
+ provide lirc |
1169 |
+} |
1170 |
+ |
1171 |
+start() { |
1172 |
+ ebegin "Starting lircd" |
1173 |
+ start-stop-daemon --start --quiet --pidfile "${PIDFILE}" --exec /usr/sbin/lircd -- \ |
1174 |
+ -P "${PIDFILE}" ${LIRCD_OPTS} |
1175 |
+ eend $? |
1176 |
+} |
1177 |
+ |
1178 |
+stop() { |
1179 |
+ ebegin "Stopping lircd" |
1180 |
+ start-stop-daemon --stop --quiet --pidfile "${PIDFILE}" --exec /usr/sbin/lircd |
1181 |
+ eend $? |
1182 |
+} |
1183 |
|
1184 |
diff --git a/app-misc/lirc/files/lircd-0.8.6 b/app-misc/lirc/files/lircd-0.8.6 |
1185 |
new file mode 100644 |
1186 |
index 0000000..dbf7a47 |
1187 |
--- /dev/null |
1188 |
+++ b/app-misc/lirc/files/lircd-0.8.6 |
1189 |
@@ -0,0 +1,41 @@ |
1190 |
+#!/sbin/runscript |
1191 |
+# Copyright 1999-2004 Gentoo Foundation |
1192 |
+# Distributed under the terms of the GNU General Public License v2 |
1193 |
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/files/lircd-0.8.6,v 1.2 2010/05/21 02:32:36 beandog Exp $ |
1194 |
+ |
1195 |
+PIDFILE=/var/run/lirc/${SVCNAME}.pid |
1196 |
+LIRCD_SYMLINKFILE=/dev/lircd |
1197 |
+LIRCD_SOCKET=/var/run/lirc/lircd |
1198 |
+ |
1199 |
+depend() { |
1200 |
+ need localmount |
1201 |
+ use modules |
1202 |
+ provide lirc |
1203 |
+} |
1204 |
+ |
1205 |
+start() { |
1206 |
+ local retval |
1207 |
+ ebegin "Starting lircd" |
1208 |
+ rm -f ${LIRCD_SOCKET} && ln -s ${LIRCD_SOCKET} ${LIRCD_SYMLINKFILE} |
1209 |
+ if [ $? -ne 0 ]; then |
1210 |
+ eend $? "Unable to create symbolic link ${LIRCD_SYMLINKFILE}" |
1211 |
+ return 1 |
1212 |
+ fi |
1213 |
+ |
1214 |
+ start-stop-daemon --start --quiet --pidfile "${PIDFILE}" --exec /usr/sbin/lircd -- \ |
1215 |
+ -P "${PIDFILE}" ${LIRCD_OPTS} |
1216 |
+ retval=$? |
1217 |
+ |
1218 |
+ if [ ${retval} -ne 0 ]; then |
1219 |
+ rm -f ${LIRCD_SOCKET} |
1220 |
+ fi |
1221 |
+ |
1222 |
+ eend ${retval} |
1223 |
+} |
1224 |
+ |
1225 |
+stop() { |
1226 |
+ ebegin "Stopping lircd" |
1227 |
+ rm -f ${LIRCD_SYMLINKFILE} |
1228 |
+ start-stop-daemon --stop --quiet --pidfile "${PIDFILE}" --exec /usr/sbin/lircd |
1229 |
+ eend $? |
1230 |
+} |
1231 |
|
1232 |
diff --git a/app-misc/lirc/files/lircd-0.8.6-r2 b/app-misc/lirc/files/lircd-0.8.6-r2 |
1233 |
new file mode 100644 |
1234 |
index 0000000..e651f19 |
1235 |
--- /dev/null |
1236 |
+++ b/app-misc/lirc/files/lircd-0.8.6-r2 |
1237 |
@@ -0,0 +1,52 @@ |
1238 |
+#!/sbin/runscript |
1239 |
+# Copyright 1999-2012 Gentoo Foundation |
1240 |
+# Distributed under the terms of the GNU General Public License v2 |
1241 |
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/files/lircd-0.8.6-r2,v 1.1 2012/07/19 19:52:17 axs Exp $ |
1242 |
+ |
1243 |
+PIDFILE=/var/run/lirc/${SVCNAME}.pid |
1244 |
+: ${LIRCD_SYMLINKFILE:=/dev/lircd} |
1245 |
+: ${LIRCD_SOCKET:=/var/run/lirc/lircd} |
1246 |
+ |
1247 |
+depend() { |
1248 |
+ need localmount |
1249 |
+ use modules |
1250 |
+ provide lirc |
1251 |
+} |
1252 |
+ |
1253 |
+start() { |
1254 |
+ local retval |
1255 |
+ |
1256 |
+ ebegin "Starting lircd" |
1257 |
+ |
1258 |
+ for retval in ${LIRCD_SET_SYSCLASSRCS} ; do |
1259 |
+ if [ -e /sys/class/rc/${retval}/protocols ] && \ |
1260 |
+ grep 'lirc' /sys/class/rc/${retval}/protocols &>/dev/null ; then |
1261 |
+ einfo "Setting lirc protocol active for ${retval}" |
1262 |
+ echo lirc >/sys/class/rc/${retval}/protocols |
1263 |
+ fi |
1264 |
+ done |
1265 |
+ |
1266 |
+ checkpath -q -d -m 0755 -o root:root /var/run/lirc |
1267 |
+ rm -Rf ${LIRCD_SOCKET} && ln -s ${LIRCD_SOCKET} ${LIRCD_SYMLINKFILE} |
1268 |
+ if [ $? -ne 0 ]; then |
1269 |
+ eend $? "Unable to create symbolic link ${LIRCD_SYMLINKFILE}" |
1270 |
+ return 1 |
1271 |
+ fi |
1272 |
+ |
1273 |
+ start-stop-daemon --start --quiet --pidfile "${PIDFILE}" --exec /usr/sbin/lircd -- \ |
1274 |
+ -P "${PIDFILE}" ${LIRCD_OPTS} |
1275 |
+ retval=$? |
1276 |
+ |
1277 |
+ if [ ${retval} -ne 0 ]; then |
1278 |
+ rm -Rf ${LIRCD_SOCKET} |
1279 |
+ fi |
1280 |
+ |
1281 |
+ eend ${retval} |
1282 |
+} |
1283 |
+ |
1284 |
+stop() { |
1285 |
+ ebegin "Stopping lircd" |
1286 |
+ rm -f ${LIRCD_SYMLINKFILE} |
1287 |
+ start-stop-daemon --stop --quiet --pidfile "${PIDFILE}" --exec /usr/sbin/lircd |
1288 |
+ eend $? |
1289 |
+} |
1290 |
|
1291 |
diff --git a/app-misc/lirc/files/lircd.conf.2 b/app-misc/lirc/files/lircd.conf.2 |
1292 |
new file mode 100644 |
1293 |
index 0000000..cfda2b8 |
1294 |
--- /dev/null |
1295 |
+++ b/app-misc/lirc/files/lircd.conf.2 |
1296 |
@@ -0,0 +1,10 @@ |
1297 |
+# Options to pass to the lircd process |
1298 |
+ |
1299 |
+# for devices with lirc-kernel-module |
1300 |
+#LIRCD_OPTS="-d /dev/lirc0" |
1301 |
+#LIRCD_OPTS="-d /dev/lirc" |
1302 |
+ |
1303 |
+# for devices using the input-layer |
1304 |
+#LIRCD_OPTS="-H devinput -d /dev/input/by-path/pci-0000:00:0a.0--event-ir" |
1305 |
+# This should work, Bug #235107 |
1306 |
+#LIRCD_OPTS="-H devinput -d name=*DVB*" |
1307 |
|
1308 |
diff --git a/app-misc/lirc/files/lircd.conf.4 b/app-misc/lirc/files/lircd.conf.4 |
1309 |
new file mode 100644 |
1310 |
index 0000000..f59c5f2 |
1311 |
--- /dev/null |
1312 |
+++ b/app-misc/lirc/files/lircd.conf.4 |
1313 |
@@ -0,0 +1,22 @@ |
1314 |
+# Options to pass to the lircd process |
1315 |
+ |
1316 |
+# for devices with lirc-kernel-module |
1317 |
+#LIRCD_OPTS="-d /dev/lirc0" |
1318 |
+#LIRCD_OPTS="-d /dev/lirc" |
1319 |
+ |
1320 |
+# for devices using the input-layer |
1321 |
+#LIRCD_OPTS="-H devinput -d /dev/input/by-path/pci-0000:00:0a.0--event-ir" |
1322 |
+# This should work, Bug #235107 |
1323 |
+#LIRCD_OPTS="-H devinput -d name=*DVB*" |
1324 |
+ |
1325 |
+# set default protocol to 'lirc' for in-kernel IR decoding |
1326 |
+# for the following entries in /sys/class/rc/ |
1327 |
+# (space-separated list if there is more than one) |
1328 |
+LIRCD_SET_SYSCLASSRCS="rc0" |
1329 |
+ |
1330 |
+# If running mulitple instances of lircd, the following |
1331 |
+# can be used to override the default socket path and |
1332 |
+# socket symlink |
1333 |
+#LIRCD_SOCKET="/var/run/lirc/lircd" |
1334 |
+#LIRCD_SYMLINKFILE="/dev/lircd" |
1335 |
+ |
1336 |
|
1337 |
diff --git a/app-misc/lirc/files/lircmd b/app-misc/lirc/files/lircmd |
1338 |
new file mode 100644 |
1339 |
index 0000000..d383778 |
1340 |
--- /dev/null |
1341 |
+++ b/app-misc/lirc/files/lircmd |
1342 |
@@ -0,0 +1,20 @@ |
1343 |
+#!/sbin/runscript |
1344 |
+# Copyright 1999-2004 Gentoo Foundation |
1345 |
+# Distributed under the terms of the GNU General Public License v2 |
1346 |
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/files/lircmd,v 1.2 2004/09/28 00:22:15 swegener Exp $ |
1347 |
+ |
1348 |
+depend() { |
1349 |
+ need lircd |
1350 |
+} |
1351 |
+ |
1352 |
+start() { |
1353 |
+ ebegin "Starting lircmd" |
1354 |
+ start-stop-daemon --start --quiet --exec /usr/sbin/lircmd |
1355 |
+ eend $? |
1356 |
+} |
1357 |
+ |
1358 |
+stop() { |
1359 |
+ ebegin "Stopping lircmd" |
1360 |
+ start-stop-daemon --stop --quiet --exec /usr/sbin/lircmd |
1361 |
+ eend $? |
1362 |
+} |
1363 |
|
1364 |
diff --git a/app-misc/lirc/files/modprobed.lirc b/app-misc/lirc/files/modprobed.lirc |
1365 |
new file mode 100644 |
1366 |
index 0000000..2ed9558 |
1367 |
--- /dev/null |
1368 |
+++ b/app-misc/lirc/files/modprobed.lirc |
1369 |
@@ -0,0 +1,22 @@ |
1370 |
+# |
1371 |
+# For first serial receivers: |
1372 |
+# |
1373 |
+#options lirc_serial irq=4 io=0x3f8 |
1374 |
+#options lirc_sir irq=4 io=0x3f8 |
1375 |
+ |
1376 |
+# |
1377 |
+# Detach first serial port from serial-driver. |
1378 |
+# Use this when you have your serial-port-driver statically |
1379 |
+# compiled into your kernel, or as a module but loaded before |
1380 |
+# the lirc-module. |
1381 |
+# |
1382 |
+#install lirc_serial setserial /dev/ttyS0 uart none; modprobe --ignore-install lirc_serial |
1383 |
+# |
1384 |
+#install lirc_sir setserial /dev/ttyS0 uart none; modprobe --ignore-install lirc_sir |
1385 |
+ |
1386 |
+ |
1387 |
+# |
1388 |
+# For parallel receivers: |
1389 |
+# |
1390 |
+#options lirc_parallel irq=7 io=0x3bc |
1391 |
+ |
1392 |
|
1393 |
diff --git a/app-misc/lirc/files/modulesd.lirc b/app-misc/lirc/files/modulesd.lirc |
1394 |
new file mode 100644 |
1395 |
index 0000000..d1838c5 |
1396 |
--- /dev/null |
1397 |
+++ b/app-misc/lirc/files/modulesd.lirc |
1398 |
@@ -0,0 +1,22 @@ |
1399 |
+# |
1400 |
+# For first serial receivers: |
1401 |
+# |
1402 |
+#options lirc_serial irq=4 io=0x3f8 |
1403 |
+#options lirc_sir irq=4 io=0x3f8 |
1404 |
+ |
1405 |
+# |
1406 |
+# Detach first serial port from serial-driver. |
1407 |
+# Use this when you have your serial-port-driver statically |
1408 |
+# compiled into your kernel, or as a module but loaded before |
1409 |
+# the lirc-module. |
1410 |
+# |
1411 |
+#pre-install lirc_serial setserial /dev/ttyS0 uart none |
1412 |
+# |
1413 |
+#pre-install lirc_sir setserial /dev/ttyS0 uart none |
1414 |
+ |
1415 |
+ |
1416 |
+# |
1417 |
+# For parallel receivers: |
1418 |
+# |
1419 |
+#options lirc_parallel irq=7 io=0x3bc |
1420 |
+ |
1421 |
|
1422 |
diff --git a/app-misc/lirc/lirc-0.9.0-r3.ebuild b/app-misc/lirc/lirc-0.9.0-r3.ebuild |
1423 |
new file mode 100644 |
1424 |
index 0000000..8fb3ab2 |
1425 |
--- /dev/null |
1426 |
+++ b/app-misc/lirc/lirc-0.9.0-r3.ebuild |
1427 |
@@ -0,0 +1,428 @@ |
1428 |
+# Copyright 1999-2013 Gentoo Foundation |
1429 |
+# Distributed under the terms of the GNU General Public License v2 |
1430 |
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/lirc-0.9.0-r2.ebuild,v 1.9 2013/04/02 20:55:44 ago Exp $ |
1431 |
+ |
1432 |
+EAPI=4 |
1433 |
+ |
1434 |
+inherit eutils linux-mod linux-info toolchain-funcs flag-o-matic autotools |
1435 |
+ |
1436 |
+DESCRIPTION="decode and send infra-red signals of many commonly used remote controls" |
1437 |
+HOMEPAGE="http://www.lirc.org/" |
1438 |
+ |
1439 |
+MY_P=${PN}-${PV/_/} |
1440 |
+ |
1441 |
+if [[ "${PV/_pre/}" = "${PV}" ]]; then |
1442 |
+ SRC_URI="mirror://sourceforge/lirc/${MY_P}.tar.bz2" |
1443 |
+else |
1444 |
+ SRC_URI="http://www.lirc.org/software/snapshots/${MY_P}.tar.bz2" |
1445 |
+fi |
1446 |
+ |
1447 |
+LICENSE="GPL-2" |
1448 |
+SLOT="0" |
1449 |
+KEYWORDS="amd64 ppc ppc64 x86" |
1450 |
+IUSE="debug doc hardware-carrier transmitter static-libs X" |
1451 |
+ |
1452 |
+S="${WORKDIR}/${MY_P}" |
1453 |
+ |
1454 |
+RDEPEND=" |
1455 |
+ X? ( |
1456 |
+ x11-libs/libX11 |
1457 |
+ x11-libs/libSM |
1458 |
+ x11-libs/libICE |
1459 |
+ ) |
1460 |
+ lirc_devices_alsa_usb? ( media-libs/alsa-lib ) |
1461 |
+ lirc_devices_audio? ( >media-libs/portaudio-18 ) |
1462 |
+ lirc_devices_irman? ( media-libs/libirman )" |
1463 |
+ |
1464 |
+# 2012-07-17, Ian Stakenvicius |
1465 |
+# A helper script that scrapes out values for nearly all of the variables below |
1466 |
+# from lirc's configure.ac is available at |
1467 |
+# http://dev.gentoo.org/~axs/helper-for-lirc-iuse.sh |
1468 |
+ |
1469 |
+# This are drivers with names matching the |
1470 |
+# parameter --with-driver=NAME |
1471 |
+IUSE_LIRC_DEVICES_DIRECT=" |
1472 |
+ all userspace accent act200l act220l |
1473 |
+ adaptec alsa_usb animax asusdh atilibusb |
1474 |
+ atiusb audio audio_alsa avermedia avermedia_vdomate |
1475 |
+ avermedia98 awlibusb bestbuy bestbuy2 breakoutbox |
1476 |
+ bte bw6130 caraca chronos commandir |
1477 |
+ cph06x creative creative_infracd |
1478 |
+ devinput digimatrix dsp dvico ea65 ene0100 |
1479 |
+ exaudio flyvideo ftdi gvbctv5pci hauppauge |
1480 |
+ hauppauge_dvb hercules_smarttv_stereo i2cuser |
1481 |
+ igorplugusb iguanaIR imon imon_24g imon_knob |
1482 |
+ imon_lcd imon_pad imon_rsc irdeo irdeo_remote |
1483 |
+ irlink irman irreal it87 ite8709 |
1484 |
+ knc_one kworld leadtek_0007 leadtek_0010 |
1485 |
+ leadtek_pvr2000 livedrive_midi |
1486 |
+ livedrive_seq logitech macmini |
1487 |
+ mediafocusI mouseremote |
1488 |
+ mouseremote_ps2 mp3anywhere mplay nslu2 |
1489 |
+ packard_bell parallel pcmak pcmak_usb |
1490 |
+ pctv pixelview_bt878 pixelview_pak |
1491 |
+ pixelview_pro provideo realmagic |
1492 |
+ remotemaster sa1100 samsung sasem sb0540 serial |
1493 |
+ silitek sir slinke streamzap tekram |
1494 |
+ tekram_bt829 tira ttusbir tuxbox tvbox udp uirt2 |
1495 |
+ uirt2_raw usb_irtoy usb_uirt_raw usbx wpc8769l" |
1496 |
+ |
1497 |
+# drivers that need special handling and |
1498 |
+# must have another name specified for |
1499 |
+# parameter --with-driver=NAME |
1500 |
+IUSE_LIRC_DEVICES_SPECIAL=" |
1501 |
+ serial_igor_cesko |
1502 |
+ remote_wonder_plus xboxusb usbirboy inputlirc" |
1503 |
+ |
1504 |
+IUSE_LIRC_DEVICES="${IUSE_LIRC_DEVICES_DIRECT} ${IUSE_LIRC_DEVICES_SPECIAL}" |
1505 |
+ |
1506 |
+# The following are lists which are used to provide ewarns on incompatibilities |
1507 |
+# with the kernel: |
1508 |
+ |
1509 |
+#drivers that do not build kernel modules |
1510 |
+NO_KMOD_BUILT_FOR_DEV=" |
1511 |
+ accent bte creative creative_infracd devinput dsp ea65 exaudio |
1512 |
+ ftdi i2cuser irlink irreal livedrive_midi livedrive_seq logitech |
1513 |
+ mediafocusI mouseremote mouseremote_ps2 mp3anywhere mplay mplay2 |
1514 |
+ pcmak pcmak_usb pctv realmagic remotemaster silitek tira tira_raw |
1515 |
+ tuxbox udp uirt2 uirt2_raw usb_irtoy usb_uirt_raw usbx" |
1516 |
+ |
1517 |
+#drivers that build lirc_dev and so will conflict with kernel lirc_dev |
1518 |
+LIRCDEV_BUILT_FOR_DEV="all |
1519 |
+ act200l act220l adaptec animax atiusb breakoutbox hauppauge |
1520 |
+ hauppauge_dvb hercules_smarttv_stereo igorplugusb imon imon_24g |
1521 |
+ imon_knob imon_lcd imon_pad imon_rsc irdeo irdeo_remote knc_one |
1522 |
+ leadtek_pvr2000 nslu2 packard_bell parallel pixelview_bt878 |
1523 |
+ provideo sa1100 sasem serial sir tekram tekram_bt829 ttusbir |
1524 |
+ tvbox wpc8769l" |
1525 |
+ |
1526 |
+#lirc_gpio drivers, which cannot be supported on kernel >= 2.6.22 |
1527 |
+LIRC_GPIO_DEV=" |
1528 |
+ avermedia avermedia98 avermedia_vdomate bestbuy bestbuy2 chronos |
1529 |
+ cph03x cph06x flyvideo gvbctv5pci kworld leadtek_0007 leadtek_0010 |
1530 |
+ pixelview_pak pixelview_pro" |
1531 |
+ |
1532 |
+#device-driver which use libusb |
1533 |
+LIBUSB_USED_BY_DEV=" |
1534 |
+ all atilibusb awlibusb sasem igorplugusb imon imon_lcd imon_pad |
1535 |
+ imon_rsc streamzap xboxusb irlink commandir" |
1536 |
+ |
1537 |
+for dev in ${LIBUSB_USED_BY_DEV}; do |
1538 |
+ DEPEND="${DEPEND} lirc_devices_${dev}? ( virtual/libusb:0 )" |
1539 |
+done |
1540 |
+ |
1541 |
+# adding only compile-time depends |
1542 |
+DEPEND="${RDEPEND} ${DEPEND} |
1543 |
+ virtual/linux-sources |
1544 |
+ lirc_devices_ftdi? ( dev-embedded/libftdi ) |
1545 |
+ lirc_devices_all? ( dev-embedded/libftdi )" |
1546 |
+ |
1547 |
+# adding only run-time depends |
1548 |
+RDEPEND="${RDEPEND} |
1549 |
+ lirc_devices_usbirboy? ( app-misc/usbirboy ) |
1550 |
+ lirc_devices_inputlirc? ( app-misc/inputlircd ) |
1551 |
+ lirc_devices_iguanaIR? ( app-misc/iguanaIR )" |
1552 |
+ |
1553 |
+# add all devices to IUSE |
1554 |
+# and ensure lirc_devices_all is not set alongside lirc_devices_* |
1555 |
+REQUIRED_USE="lirc_devices_all? (" |
1556 |
+for dev in ${IUSE_LIRC_DEVICES}; do |
1557 |
+ IUSE="${IUSE} lirc_devices_${dev}" |
1558 |
+ if [[ "${dev}" != "all" ]]; then |
1559 |
+ REQUIRED_USE="${REQUIRED_USE} !lirc_devices_${dev}" |
1560 |
+ fi |
1561 |
+done |
1562 |
+REQUIRED_USE="${REQUIRED_USE} )" |
1563 |
+ |
1564 |
+add_device() { |
1565 |
+ local dev="${1}" |
1566 |
+ local desc="device ${dev}" |
1567 |
+ if [[ -n "${2}" ]]; then |
1568 |
+ desc="${2}" |
1569 |
+ fi |
1570 |
+ |
1571 |
+ # Bug #187418 |
1572 |
+ if kernel_is ge 2 6 22 && [[ " ${LIRC_GPIO_DEV} " == *" ${dev} "* ]]; then |
1573 |
+ eerror "${desc} uses lirc_gpio which fails with kernel 2.6.22 or above. Not building." |
1574 |
+ eerror "Use 'devinput' instead, or use 'userspace' along with in-kernel drivers" |
1575 |
+ return 0 |
1576 |
+ fi |
1577 |
+ : ${lirc_device_count:=0} |
1578 |
+ ((lirc_device_count++)) |
1579 |
+ |
1580 |
+ elog "Compiling support for ${desc}" |
1581 |
+ |
1582 |
+ if [[ " ${LIRCDEV_BUILT_FOR_DEV} " == *" ${dev} "* ]] ; then |
1583 |
+ if linux_chkconfig_present LIRC ; then |
1584 |
+ ewarn "${desc} builds lirc_dev and CONFIG_LIRC is set in the kernel -- this may conflict." |
1585 |
+ fi |
1586 |
+ if ! linux_chkconfig_present MODULE_UNLOAD ; then |
1587 |
+ ewarn "${desc} builds modules and CONFIG_MODULE_UNLOAD is unset in kernel." |
1588 |
+ ewarn "You will need MODULE_UNLOAD support in your kernel." |
1589 |
+ fi |
1590 |
+ fi |
1591 |
+ if [[ " ${NO_KMOD_BUILT_FOR_DEV} " == *" ${dev} "* ]] && ! linux_chkconfig_present IR_LIRC_CODEC ; then |
1592 |
+ ewarn "${desc} builds no kernel module and CONFIG_IR_LIRC_CODEC is unset in kernel." |
1593 |
+ fi |
1594 |
+ |
1595 |
+ if [[ ${lirc_device_count} -eq 2 ]] ; then |
1596 |
+ ewarn |
1597 |
+ ewarn "LIRC_DEVICES has more than one entry." |
1598 |
+ ewarn "When selecting multiple devices for lirc to be supported," |
1599 |
+ ewarn "it can not be guaranteed that the drivers play nice together." |
1600 |
+ ewarn "If this is not intended, then please adjust LIRC_DEVICES" |
1601 |
+ ewarn "and re-emerge." |
1602 |
+ ewarn |
1603 |
+ fi |
1604 |
+ |
1605 |
+ MY_OPTS="${MY_OPTS} --with-driver=${dev}" |
1606 |
+} |
1607 |
+ |
1608 |
+pkg_pretend() { |
1609 |
+ if [[ -n "${LIRC_OPTS}" ]] ; then |
1610 |
+ ewarn |
1611 |
+ ewarn "LIRC_OPTS is deprecated from lirc-0.8.0-r1 on." |
1612 |
+ ewarn |
1613 |
+ ewarn "Please use LIRC_DEVICES from now on." |
1614 |
+ ewarn "e.g. LIRC_DEVICES=\"serial sir\"" |
1615 |
+ ewarn |
1616 |
+ ewarn "Flags are now set per use-flags." |
1617 |
+ ewarn "e.g. transmitter, hardware-carrier" |
1618 |
+ |
1619 |
+ local opt |
1620 |
+ local unsupported_opts="" |
1621 |
+ |
1622 |
+ # test for allowed options for LIRC_OPTS |
1623 |
+ for opt in ${LIRC_OPTS}; do |
1624 |
+ case ${opt} in |
1625 |
+ --with-port=*|--with-irq=*|--with-timer=*|--with-tty=*) |
1626 |
+ MY_OPTS="${MY_OPTS} ${opt}" |
1627 |
+ ;; |
1628 |
+ *) |
1629 |
+ unsupported_opts="${unsupported_opts} ${opt}" |
1630 |
+ ;; |
1631 |
+ esac |
1632 |
+ done |
1633 |
+ if [[ -n ${unsupported_opts} ]]; then |
1634 |
+ eerror "These options are no longer allowed to be set" |
1635 |
+ eerror "with LIRC_OPTS: ${unsupported_opts}" |
1636 |
+ die "LIRC_OPTS is no longer supported, use LIRC_DEVICES." |
1637 |
+ fi |
1638 |
+ fi |
1639 |
+} |
1640 |
+ |
1641 |
+pkg_setup() { |
1642 |
+ linux-mod_pkg_setup |
1643 |
+ |
1644 |
+ # set default configure options |
1645 |
+ MY_OPTS="" |
1646 |
+ LIRC_DRIVER_DEVICE="/dev/lirc0" |
1647 |
+ |
1648 |
+ if use lirc_devices_all; then |
1649 |
+ # compile in drivers for a lot of devices |
1650 |
+ add_device all "a lot of devices" |
1651 |
+ else |
1652 |
+ # compile in only requested drivers |
1653 |
+ local dev |
1654 |
+ for dev in ${IUSE_LIRC_DEVICES_DIRECT}; do |
1655 |
+ if use lirc_devices_${dev}; then |
1656 |
+ add_device ${dev} |
1657 |
+ fi |
1658 |
+ done |
1659 |
+ |
1660 |
+ if use lirc_devices_remote_wonder_plus; then |
1661 |
+ add_device atiusb "device Remote Wonder Plus (atiusb-based)" |
1662 |
+ fi |
1663 |
+ |
1664 |
+ if use lirc_devices_serial_igor_cesko; then |
1665 |
+ add_device serial "serial with Igor Cesko design" |
1666 |
+ MY_OPTS="${MY_OPTS} --with-igor" |
1667 |
+ fi |
1668 |
+ |
1669 |
+ if use lirc_devices_imon_pad; then |
1670 |
+ ewarn "The imon_pad driver has incorporated the previous pad2keys patch" |
1671 |
+ ewarn "and removed the pad2keys_active option for the lirc_imon module" |
1672 |
+ ewarn "because it is always active." |
1673 |
+ ewarn "If you have an older imon VFD device, you may need to add the module" |
1674 |
+ ewarn "option display_type=1 to override autodetection and force VFD mode." |
1675 |
+ fi |
1676 |
+ |
1677 |
+ if use lirc_devices_xboxusb; then |
1678 |
+ add_device atiusb "device xboxusb" |
1679 |
+ fi |
1680 |
+ |
1681 |
+ if use lirc_devices_usbirboy; then |
1682 |
+ add_device userspace "device usbirboy" |
1683 |
+ LIRC_DRIVER_DEVICE="/dev/usbirboy" |
1684 |
+ fi |
1685 |
+ |
1686 |
+ if [[ "${MY_OPTS}" == "" ]]; then |
1687 |
+ if [[ "${PROFILE_ARCH}" == "xbox" ]]; then |
1688 |
+ # on xbox: use special driver |
1689 |
+ add_device atiusb "device xboxusb" |
1690 |
+ else |
1691 |
+ # no driver requested |
1692 |
+ elog |
1693 |
+ elog "Compiling only the lirc-applications, but no drivers." |
1694 |
+ elog "Enable drivers with LIRC_DEVICES if you need them." |
1695 |
+ MY_OPTS="--with-driver=none" |
1696 |
+ fi |
1697 |
+ fi |
1698 |
+ fi |
1699 |
+ |
1700 |
+ use hardware-carrier && MY_OPTS="${MY_OPTS} --without-soft-carrier" |
1701 |
+ use transmitter && MY_OPTS="${MY_OPTS} --with-transmitter" |
1702 |
+ |
1703 |
+ einfo |
1704 |
+ einfo "lirc-configure-opts: ${MY_OPTS}" |
1705 |
+ elog "Setting default lirc-device to ${LIRC_DRIVER_DEVICE}" |
1706 |
+ |
1707 |
+ filter-flags -Wl,-O1 |
1708 |
+ |
1709 |
+ # force non-parallel make, Bug 196134 (confirmed valid for 0.9.0-r2) |
1710 |
+ MAKEOPTS="${MAKEOPTS} -j1" |
1711 |
+} |
1712 |
+ |
1713 |
+src_prepare() { |
1714 |
+ # Rip out dos CRLF |
1715 |
+ edos2unix contrib/lirc.rules |
1716 |
+ |
1717 |
+ # Apply patches needed for some special device-types |
1718 |
+ use lirc_devices_audio || epatch "${FILESDIR}"/lirc-0.8.4-portaudio_check.patch |
1719 |
+ use lirc_devices_remote_wonder_plus && epatch "${FILESDIR}"/lirc-0.8.3_pre1-remotewonderplus.patch |
1720 |
+ |
1721 |
+ use lirc_devices_usb_irtoy && epatch "${FILESDIR}"/lirc-0.9.0-usb_irtoy.patch |
1722 |
+ |
1723 |
+ # Apply fixes for kernel-2.6.39 and above |
1724 |
+ epatch "${FILESDIR}"/${P}-kernel-2.6.39-fixes.patch |
1725 |
+ # Slightly massaged upstream patch to fix kfifo issues >=2.6.38 |
1726 |
+ # for bug 377033 |
1727 |
+ epatch "${FILESDIR}"/${P}-atiusb_kfifo.patch |
1728 |
+ # Apply fixes for kernel-3.3 and above (bug 439538) |
1729 |
+ epatch "${FILESDIR}"/${P}-kernel-3.3.0-fixes.patch |
1730 |
+ # Apply fix for missing err() in usb.h for kernel 3.5+ (bug 444736) |
1731 |
+ epatch "${FILESDIR}"/${P}-kernel-3.5-err-fix.patch |
1732 |
+ |
1733 |
+ # Do not build drivers from the top-level Makefile |
1734 |
+ sed -i -e 's:\(SUBDIRS =\) drivers\(.*\):\1\2:' Makefile.am |
1735 |
+ |
1736 |
+ # remove parallel driver on SMP systems |
1737 |
+ if linux_chkconfig_present SMP ; then |
1738 |
+ sed -i -e "s:lirc_parallel\.o::" drivers/lirc_parallel/Makefile.am |
1739 |
+ fi |
1740 |
+ |
1741 |
+ # Bug #187418 - only need this part for lirc_devices_all as others die in pkg_setup |
1742 |
+ if use lirc_devices_all && kernel_is ge 2 6 22 ; then |
1743 |
+ ewarn "Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+" |
1744 |
+ sed -i -e "s:lirc_gpio\.o::" drivers/lirc_gpio/Makefile.am |
1745 |
+ fi |
1746 |
+ |
1747 |
+ # respect CFLAGS |
1748 |
+ sed -i -e 's:CFLAGS="-O2:CFLAGS=""\n#CFLAGS="-O2:' configure.ac |
1749 |
+ |
1750 |
+ # setting default device-node |
1751 |
+ local f |
1752 |
+ for f in configure.ac acconfig.h; do |
1753 |
+ [[ -f "$f" ]] && sed -i -e '/#define LIRC_DRIVER_DEVICE/d' "$f" |
1754 |
+ done |
1755 |
+ echo "#define LIRC_DRIVER_DEVICE \"${LIRC_DRIVER_DEVICE}\"" >> acconfig.h |
1756 |
+ |
1757 |
+ eautoreconf |
1758 |
+} |
1759 |
+ |
1760 |
+src_configure() { |
1761 |
+ econf \ |
1762 |
+ --localstatedir=/var \ |
1763 |
+ --with-syslog=LOG_DAEMON \ |
1764 |
+ --enable-sandboxed \ |
1765 |
+ --with-kerneldir="${KV_DIR}" \ |
1766 |
+ --with-moduledir="/lib/modules/${KV_FULL}/misc" \ |
1767 |
+ $(use_enable debug) \ |
1768 |
+ $(use_enable static-libs static) \ |
1769 |
+ $(use_with X x) \ |
1770 |
+ ${MY_OPTS} \ |
1771 |
+ ABI="${KERNEL_ABI}" \ |
1772 |
+ ARCH="$(tc-arch-kernel)" |
1773 |
+} |
1774 |
+ |
1775 |
+src_compile() { |
1776 |
+ emake |
1777 |
+ |
1778 |
+ MODULE_NAMES="lirc(misc:${S}/drivers)" |
1779 |
+ BUILD_TARGETS="all" |
1780 |
+ linux-mod_src_compile |
1781 |
+} |
1782 |
+ |
1783 |
+src_install() { |
1784 |
+ emake DESTDIR="${D}" install |
1785 |
+ emake -C drivers DESTDIR="${D}" install |
1786 |
+ |
1787 |
+ newinitd "${FILESDIR}"/lircd-0.8.6-r2 lircd |
1788 |
+ newinitd "${FILESDIR}"/lircmd lircmd |
1789 |
+ newconfd "${FILESDIR}"/lircd.conf.4 lircd |
1790 |
+ |
1791 |
+ insinto /etc/modprobe.d/ |
1792 |
+ newins "${FILESDIR}"/modprobed.lirc lirc.conf |
1793 |
+ |
1794 |
+ newinitd "${FILESDIR}"/irexec-initd-0.8.6-r2 irexec |
1795 |
+ newconfd "${FILESDIR}"/irexec-confd irexec |
1796 |
+ |
1797 |
+ if use doc ; then |
1798 |
+ dohtml doc/html/*.html |
1799 |
+ insinto /usr/share/doc/${PF}/images |
1800 |
+ doins doc/images/* |
1801 |
+ fi |
1802 |
+ |
1803 |
+ insinto /usr/share/lirc/remotes |
1804 |
+ doins -r remotes/* |
1805 |
+ |
1806 |
+ keepdir /etc/lirc |
1807 |
+ if [[ -e "${D}"/etc/lirc/lircd.conf ]]; then |
1808 |
+ newdoc "${D}"/etc/lirc/lircd.conf lircd.conf.example |
1809 |
+ fi |
1810 |
+ |
1811 |
+ use static-libs || rm "${D}/usr/$(get_libdir)/liblirc_client.la" |
1812 |
+} |
1813 |
+ |
1814 |
+pkg_preinst() { |
1815 |
+ linux-mod_pkg_preinst |
1816 |
+ |
1817 |
+ local dir="${EROOT}/etc/modprobe.d" |
1818 |
+ if [[ -a "${dir}"/lirc && ! -a "${dir}"/lirc.conf ]]; then |
1819 |
+ elog "Renaming ${dir}/lirc to lirc.conf" |
1820 |
+ mv -f "${dir}/lirc" "${dir}/lirc.conf" |
1821 |
+ fi |
1822 |
+ |
1823 |
+ # copy the first file that can be found |
1824 |
+ if [[ -f "${EROOT}"/etc/lirc/lircd.conf ]]; then |
1825 |
+ cp "${EROOT}"/etc/lirc/lircd.conf "${T}"/lircd.conf |
1826 |
+ elif [[ -f "${EROOT}"/etc/lircd.conf ]]; then |
1827 |
+ cp "${EROOT}"/etc/lircd.conf "${T}"/lircd.conf |
1828 |
+ MOVE_OLD_LIRCD_CONF=1 |
1829 |
+ elif [[ -f "${D}"/etc/lirc/lircd.conf ]]; then |
1830 |
+ cp "${D}"/etc/lirc/lircd.conf "${T}"/lircd.conf |
1831 |
+ fi |
1832 |
+ |
1833 |
+ # stop portage from touching the config file |
1834 |
+ if [[ -e "${D}"/etc/lirc/lircd.conf ]]; then |
1835 |
+ rm -f "${D}"/etc/lirc/lircd.conf |
1836 |
+ fi |
1837 |
+} |
1838 |
+ |
1839 |
+pkg_postinst() { |
1840 |
+ linux-mod_pkg_postinst |
1841 |
+ |
1842 |
+ # copy config file to new location |
1843 |
+ # without portage knowing about it |
1844 |
+ # so it will not delete it on unmerge or ever touch it again |
1845 |
+ if [[ -e "${T}"/lircd.conf ]]; then |
1846 |
+ cp "${T}"/lircd.conf "${EROOT}"/etc/lirc/lircd.conf |
1847 |
+ if [[ "$MOVE_OLD_LIRCD_CONF" = "1" ]]; then |
1848 |
+ elog "Moved /etc/lircd.conf to /etc/lirc/lircd.conf" |
1849 |
+ rm -f "${EROOT}"/etc/lircd.conf |
1850 |
+ fi |
1851 |
+ fi |
1852 |
+ |
1853 |
+ einfo "The new default location for lircd.conf is inside of" |
1854 |
+ einfo "/etc/lirc/ directory" |
1855 |
+} |