Re: [gentoo-dev] drive timeout

[Brian Jackson]

I never found a way around it, I eventually just disabled the drivers in the 
kernel and used pata. You may have luck with the libata drivers. I never 
tried those.

--Iggy

On Sunday 14 December 2003 11:08 am, Robert Cole wrote:
> Sorry for the cross-post but no one in gentoo-user seemed to know anything
> about this. Not sure if it's a kernel setting, bug, or what yet but I
figured 
> the best way to find out is toss it to the devs. :)
>
> I have only one drive on the raid controller right now but the kernel wants
to 
> keep looking for another drive and it takes a LONG time. Is there a way to
> get it to not keep looking?
>
> SiI3112 Serial ATA: IDE controller at PCI slot 0000:02:04.0
> SiI3112 Serial ATA: chipset revision 2
> SiI3112 Serial ATA: 100% native mode on irq 21
>     ide2: MMIO-DMA at 0xf8806000-0xf8806007, BIOS settings: hde:pio, hdf:pio
>     ide3: MMIO-DMA at 0xf8806008-0xf880600f, BIOS settings: hdg:pio, hdh:pio
> hde: ST3120023AS, ATA DISK drive
> ide2 at 0xf8806080-0xf8806087,0xf880608a on irq 21
> hdg: no response (status = 0xfe)
> hdg: no response (status = 0xfe), resetting drive
> hdg: no response (status = 0xfe)
> hde: max request size: 7KiB
> hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63,
UDMA(133)
>  /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4
>
>
> Each of those no responses take about a minute to come back.
>
> This is a 2.6.0-test10-mm1 kernel but it does the exact same thing on the
2.4 
> kernels.
>
> Also note this is a SATA drive and the only SATA connections on the system
> board are to the raid controller which doesn't allow disabling just the one
> drive port.
>
> --
> gentoo-dev@g.o mailing list
>
>

-- 
Home -- http://www.brianandsara.net
Gentoo -- http://gentoo.brianandsara.net

--
gentoo-dev@g.o mailing list