Re: [gentoo-embedded] crossdev fail

[Ned Ludd]

On Thu, 2010-06-24 at 19:36 +0200, Jakub Ladman wrote:
> Dne ètvrtek 24 Èerven 2010 10:22:01 Peter Stuge napsal(a):
> > Jakub Ladman wrote:
> > > After some months i need to rebuild my arm-softfloat-linux-gnu toolchain.
> >
> > ..
> >
> > > Please recommend me, what to check up.
> >
> > Is the arm-version needed? armv6, armv7, etc?
>
> The chip has core arm920t, where i get info about its name in current
> crossdev?

If it's an 920t then most likely you will want a chost such as
armv4tl-softfloat-linux-gnu(eabi)


>
> I have functional system built with toolchain generated before two years, now
> i must appned some new packeges and do upgrade, but my toolchain stops
> working, i need functional arm-softfloat-linux-gnu toolchain, not eabi for
> binary compatibility. I need to send binary package via slow curious line to
> the system and it must run.
>
> Three days of trying and still nothing, i'm stuck in big piece of shit.

Try not to get discouraged. If it's not working for you. Take a break,
and return at a later time when you feel less stressed.

> I have somewhere backup of old toolchain, on former colegue's notebook, but
> ...

Here are some known working versions.

wizdev local # qlist -I armv4tl -v
cross-armv4tl-softfloat-linux-gnueabi/binutils-2.19.1-r1
cross-armv4tl-softfloat-linux-gnueabi/gcc-4.2.4
cross-armv4tl-softfloat-linux-gnueabi/gcc-4.4.2
cross-armv4tl-softfloat-linux-gnueabi/glibc-2.9_p20081201-r2
cross-armv4tl-softfloat-linux-gnueabi/linux-headers-2.6.30-r1


>
> Jakub
>
> >
> > I just built arm-softfloat-eabi without problems, though that's
> > pretty different.
> >
> >
> > //Peter
> >
>

-- 
Ned Ludd <solar@g.o>
Gentoo Linux