1 |
*** Running command: time catalyst -a -c /etc/catalyst/release/amd64-auto.conf -f hardened/admincd-stage2.spec |
2 |
08 Jul 2018 21:47:07 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf |
3 |
08 Jul 2018 21:47:07 UTC: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'preserve_libs', 'clear-autoresume'} |
4 |
08 Jul 2018 21:47:07 UTC: NOTICE : Processing spec file: hardened/admincd-stage2.spec |
5 |
08 Jul 2018 21:47:07 UTC: NOTICE : Using target: livecd-stage2 |
6 |
08 Jul 2018 21:47:07 UTC: NOTICE : Source file specification matching setting is: loose |
7 |
08 Jul 2018 21:47:07 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar'] |
8 |
08 Jul 2018 21:47:08 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/livecd-stage1-amd64-20180708T021904Z.tar.xz |
9 |
08 Jul 2018 21:47:08 UTC: NOTICE : --- Running action sequence: unpack |
10 |
08 Jul 2018 21:47:08 UTC: NOTICE : Clearing the chroot path ... |
11 |
08 Jul 2018 21:47:08 UTC: NOTICE : Emptying directory: /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z |
12 |
08 Jul 2018 21:47:08 UTC: NOTICE : Starting auto from /home/release/buildroot/amd64-dev/builds/hardened/livecd-stage1-amd64-20180708T021904Z.tar.xz |
13 |
08 Jul 2018 21:47:08 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z (this may take some time) .. |
14 |
08 Jul 2018 21:47:14 UTC: NOTICE : --- Running action sequence: unpack_snapshot |
15 |
08 Jul 2018 21:47:14 UTC: NOTICE : Unpacking portage tree (this can take a long time) ... |
16 |
08 Jul 2018 21:47:26 UTC: NOTICE : --- Running action sequence: config_profile_link |
17 |
08 Jul 2018 21:47:26 UTC: NOTICE : --- Running action sequence: setup_confdir |
18 |
08 Jul 2018 21:47:26 UTC: NOTICE : --- Running action sequence: portage_overlay |
19 |
08 Jul 2018 21:47:26 UTC: NOTICE : --- Running action sequence: bind |
20 |
08 Jul 2018 21:47:26 UTC: NOTICE : --- Running action sequence: chroot_setup |
21 |
08 Jul 2018 21:47:26 UTC: NOTICE : Setting up chroot... |
22 |
08 Jul 2018 21:47:26 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
23 |
08 Jul 2018 21:47:26 UTC: WARNING : If your build fails look here first as the possible problem. |
24 |
08 Jul 2018 21:47:26 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
25 |
08 Jul 2018 21:47:26 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
26 |
08 Jul 2018 21:47:26 UTC: WARNING : You have been warned. |
27 |
08 Jul 2018 21:47:26 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z/etc/portage/make.conf |
28 |
08 Jul 2018 21:47:26 UTC: NOTICE : STICKY-CONFIG is enabled |
29 |
08 Jul 2018 21:47:26 UTC: NOTICE : --- Running action sequence: setup_environment |
30 |
08 Jul 2018 21:47:26 UTC: NOTICE : --- Running action sequence: run_local |
31 |
08 Jul 2018 21:47:26 UTC: NOTICE : --- Running action sequence: build_kernel |
32 |
Copying pre-kmerge.sh to /tmp |
33 |
copying pre-kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z/tmp |
34 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z/tmp |
35 |
Ensure the file has the executable bit set |
36 |
Running pre-kmerge.sh in chroot: |
37 |
chroot /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z /tmp/pre-kmerge.sh |
38 |
>>> Regenerating /etc/ld.so.cache... |
39 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel |
40 |
>>> Verifying ebuild manifests |
41 |
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3 |
42 |
>>> Emerging binary (1 of 2) sys-kernel/linux-firmware-20180103-r1::gentoo |
43 |
>>> Installing (1 of 2) sys-kernel/linux-firmware-20180103-r1::gentoo |
44 |
>>> Emerging (2 of 2) sys-kernel/genkernel-3.5.3.3::gentoo |
45 |
>>> Installing (2 of 2) sys-kernel/genkernel-3.5.3.3::gentoo |
46 |
* Messages for package sys-kernel/linux-firmware-20180103-r1: |
47 |
* If you are only interested in particular firmware files, edit the saved |
48 |
* configfile and remove those that you do not want. |
49 |
* Messages for package sys-kernel/genkernel-3.5.3.3: |
50 |
* Documentation is available in the genkernel manual page |
51 |
* as well as the following URL: |
52 |
* https://wiki.gentoo.org/wiki/Genkernel |
53 |
* This package is known to not work with reiser4. If you are running |
54 |
* reiser4 and have a problem, do not file a bug. We know it does not |
55 |
* work and we don't plan on fixing it since reiser4 is the one that is |
56 |
* broken in this regard. Try using a sane filesystem like ext4. |
57 |
* The LUKS support has changed from versions prior to 3.4.4. Now, |
58 |
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah. |
59 |
|
60 |
|
61 |
|
62 |
|
63 |
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z/tmp/pre-kmerge.sh from the chroot |
64 |
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z/tmp/chroot-functions.sh from the chroot |
65 |
Copying kmerge.sh to /tmp |
66 |
copying kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z/tmp |
67 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z/tmp |
68 |
Ensure the file has the executable bit set |
69 |
Running kmerge.sh in chroot: |
70 |
chroot /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20180708T021904Z /tmp/kmerge.sh |
71 |
>>> Regenerating /etc/ld.so.cache... |
72 |
Genkernel version 3.5.3.3 found ... OK |
73 |
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources |
74 |
>>> Emerging binary (1 of 2) sys-devel/bc-1.06.95-r2::gentoo |
75 |
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo |
76 |
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-4.14.52::gentoo |
77 |
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.14.52::gentoo |
78 |
>>> Recording sys-kernel/gentoo-sources in "world" favorites file... |
79 |
* Messages for package sys-kernel/gentoo-sources-4.14.52: |
80 |
* If you are upgrading from a previous kernel, you may be interested |
81 |
* in the following document: |
82 |
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade |
83 |
|
84 |
|
85 |
Adjusting /usr/src/linux to point to /usr/src/linux-4.14.52-gentoo |
86 |
[32;01m*[32;01m Gentoo Linux Genkernel; Version 3.5.3.3[0m |
87 |
[32;01m*[0m Running with options: --callback=emerge -qN app-accessibility/espeakup media-libs/alsa-oss media-sound/alsa-utils sys-apps/pcmciautils sys-kernel/linux-firmware --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20180708T021904Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20180708T021904Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20180708T021904Z.tar.bz2 all --kernel-config=/var/tmp/gentoo.config |
88 |
|
89 |
[32;01m*[0m Using genkernel.conf from /etc/genkernel.conf |
90 |
[32;01m*[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh .. |
91 |
[32;01m*[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load .. |
92 |
[32;01m*[0;01m Linux Kernel [0;01m4.14.52-gentoo[0m for [0;01mx86_64[0m... |
93 |
[32;01m*[0m .. with config file /var/tmp/gentoo.config |
94 |
[32;01m*[0m kernel: Using config from /var/tmp/gentoo.config |
95 |
[32;01m*[0m kernel: >> Running mrproper... |
96 |
[32;01m*[0m >> Running oldconfig... |
97 |
[32;01m*[0m kernel: >> Cleaning... |
98 |
[32;01m*[0m >> Compiling 4.14.52-gentoo bzImage... |
99 |
[32;01m*[0m >> Not installing firmware as requested by configuration FIRMWARE_INSTALL=no... |
100 |
[32;01m*[0m >> Compiling 4.14.52-gentoo modules... |
101 |
16 Jul 2018 22:31:24 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited -15 |
102 |
16 Jul 2018 22:31:24 UTC: ERROR : CatalystError: build aborting due to kernel build error. |
103 |
Traceback (most recent call last): |
104 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1575, in build_kernel |
105 |
self._build_kernel(kname = kname) |
106 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1612, in _build_kernel |
107 |
env=self.env) |
108 |
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd |
109 |
print_traceback=False) |
110 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited -15 |
111 |
16 Jul 2018 22:31:24 UTC: ERROR : Exception running action sequence build_kernel |
112 |
Traceback (most recent call last): |
113 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1575, in build_kernel |
114 |
self._build_kernel(kname = kname) |
115 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1612, in _build_kernel |
116 |
env=self.env) |
117 |
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd |
118 |
print_traceback=False) |
119 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited -15 |
120 |
|
121 |
During handling of the above exception, another exception occurred: |
122 |
|
123 |
Traceback (most recent call last): |
124 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1455, in run |
125 |
getattr(self, x)() |
126 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1581, in build_kernel |
127 |
print_traceback=True) |
128 |
catalyst.support.CatalystError: build aborting due to kernel build error. |
129 |
16 Jul 2018 22:31:24 UTC: NOTICE : Cleaning up... Running unbind() |
130 |
Command exited with non-zero status 2 |
131 |
62.08user 7.07system 192:44:17elapsed 0%CPU (0avgtext+0avgdata 378044maxresident)k |
132 |
16inputs+6032600outputs (0major+1087938minor)pagefaults 0swaps |
133 |
|
134 |
|
135 |
|
136 |
Full build log at /home/release/tmp/run/catalyst-auto.20180708T021904Z.GMEtfA/log/hardened_admincd-stage2.log |