[gentoo-releng-autobuilds] [ppc64-auto] Catalyst non-fatal build error - installcd-stage1.spec

powerpc-unknown-linux-gnu-gcc -I../../include -I../../intl -I/usr/include/ncurses -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -DENABLE_NLS -DPACKAGE=\"evms\" -DLOCALEDIR=\"/usr/share/locale\" -DMAJOR_VERSION=2 -DMINOR_VERSION=5 -DPATCH_LEVEL=5 -DVERSION=\"2.5.5\" -DDATE=\"05/09/11\" -Wall -fPIC -fno-strict-aliasing -O2 -pipe -c settings.c -o settings.o
powerpc-unknown-linux-gnu-gcc -I../../include -I../../intl -I/usr/include/ncurses -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -DENABLE_NLS -DPACKAGE=\"evms\" -DLOCALEDIR=\"/usr/share/locale\" -DMAJOR_VERSION=2 -DMINOR_VERSION=5 -DPATCH_LEVEL=5 -DVERSION=\"2.5.5\" -DDATE=\"05/09/11\" -Wall -fPIC -fno-strict-aliasing -O2 -pipe -c task.c -o task.o
powerpc-unknown-linux-gnu-gcc -I../../include -I../../intl -I/usr/include/ncurses -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -DENABLE_NLS -DPACKAGE=\"evms\" -DLOCALEDIR=\"/usr/share/locale\" -DMAJOR_VERSION=2 -DMINOR_VERSION=5 -DPATCH_LEVEL=5 -DVERSION=\"2.5.5\" -DDATE=\"05/09/11\" -Wall -fPIC -fno-strict-aliasing -O2 -pipe -c value.c -o value.o
remove.c: In function 'can_remove_from_container':
remove.c:248: warning: value computed is not used
powerpc-unknown-linux-gnu-gcc -I../../include -I../../intl -I/usr/include/ncurses -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -DENABLE_NLS -DPACKAGE=\"evms\" -DLOCALEDIR=\"/usr/share/locale\" -DMAJOR_VERSION=2 -DMINOR_VERSION=5 -DPATCH_LEVEL=5 -DVERSION=\"2.5.5\" -DDATE=\"05/09/11\" -Wall -fPIC -fno-strict-aliasing -O2 -pipe -c views.c -o views.o
powerpc-unknown-linux-gnu-gcc -I../../include -I../../intl -I/usr/include/ncurses -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -DENABLE_NLS -DPACKAGE=\"evms\" -DLOCALEDIR=\"/usr/share/locale\" -DMAJOR_VERSION=2 -DMINOR_VERSION=5 -DPATCH_LEVEL=5 -DVERSION=\"2.5.5\" -DDATE=\"05/09/11\" -Wall -fPIC -fno-strict-aliasing -O2 -pipe -c volume.c -o volume.o
powerpc-unknown-linux-gnu-gcc -I../../include -I../../intl -I/usr/include/ncurses -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -DENABLE_NLS -DPACKAGE=\"evms\" -DLOCALEDIR=\"/usr/share/locale\" -DMAJOR_VERSION=2 -DMINOR_VERSION=5 -DPATCH_LEVEL=5 -DVERSION=\"2.5.5\" -DDATE=\"05/09/11\" -Wall -fPIC -fno-strict-aliasing -O2 -pipe -c window.c -o window.o
window.c: In function 'init_window_system':
window.c:417: warning: ignoring return value of 'freopen', declared with attribute warn_unused_result
powerpc-unknown-linux-gnu-gcc -L../../engine -Wl,-O1 -Wl,--as-needed -o evmsn activation.o add.o backup.o callbacks.o clist.o common.o container.o convert.o create.o delete.o dialog.o enum.o fsutils.o main.o menu.o modify.o mount.o object.o options.o plugin.o readable.o remove.o replace.o resize.o save.o selwin.o settings.o task.o value.o views.o volume.o window.o -levms  -Wl,-dn -lpanel -lglib-2.0   -Wl,-dy -lncurses -lm -lpthread
/usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/../../../../powerpc-unknown-linux-gnu/bin/ld: cannot find -lpanel
collect2: ld returned 1 exit status
make[2]: *** [evmsn] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/var/tmp/portage/sys-fs/evms-2.5.5-r11/work/evms-2.5.5/ui/ncurses'
make[1]: *** [all] Error 1
make[1]: Leaving directory `/var/tmp/portage/sys-fs/evms-2.5.5-r11/work/evms-2.5.5/ui'
make: *** [all] Error 1
emake failed
 * ERROR: sys-fs/evms-2.5.5-r11 failed (compile phase):
 *   Failed emake
 * 
 * Call stack:
 *     ebuild.sh, line  56:  Called src_compile
 *   environment, line 3935:  Called die
 * The specific snippet of code:
 *       emake || die "Failed emake"
 * 
 * If you need support, post the output of 'emerge --info =sys-fs/evms-2.5.5-r11',
 * the complete build log and the output of 'emerge -pqv =sys-fs/evms-2.5.5-r11'.
 * The complete build log is located at '/var/tmp/portage/sys-fs/evms-2.5.5-r11/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-fs/evms-2.5.5-r11/temp/environment'.
 * S: '/var/tmp/portage/sys-fs/evms-2.5.5-r11/work/evms-2.5.5'

 * Messages for package sys-apps/pciutils-3.1.7:

 * The 'pcimodules' program has been replaced by 'lspci -k'

 * Messages for package sys-apps/powerpc-utils-1.1.3.18-r2:
 * The lsprop utility has been moved into the ibm-powerpc-utils package.


 * Messages for package app-crypt/pinentry-0.8.0:

 * We no longer install pinentry-curses and pinentry-qt SUID root by default.
 * Linux kernels >=2.6.9 support memory locking for unprivileged processes.
 * The soft resource limit for memory locking specifies the limit an
 * unprivileged process may lock into memory. You can also use POSIX
 * capabilities to allow pinentry to lock memory. To do so activate the caps
 * USE flag and add the CAP_IPC_LOCK capability to the permitted set of
 * your users.

 * Messages for package net-misc/dhcpcd-5.2.12:

 * Disabling zeroconf support
 * 
 * Users upgrading from 4.0 series should pay attention to removal
 * of compat useflag. This changes behavior of dhcp in wide manner:
 * dhcpcd no longer sends a default ClientID for ethernet interfaces.
 * This is so we can re-use the address the kernel DHCP client found.
 * To retain the old behaviour of sending a default ClientID based on the
 * hardware address for interface, simply add the keyword clientid
 * to dhcpcd.conf or use commandline parameter -I ''
 * 
 * Also, users upgrading from 4.0 series should be aware that
 * the -N, -R and -Y command line options no longer exist.
 * These are controled now by nohook options in dhcpcd.conf.

 * Messages for package sys-fs/mdadm-3.1.4:

 * If using baselayout-2 and not relying on kernel auto-detect
 * of your RAID devices, you need to add 'mdraid' to your 'boot'
 * runlevel. Run the following command:
 * rc-update add mdraid boot

 * Messages for package net-dialup/ppp-2.4.4-r25:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.4-r25/scripts directory.

 * Messages for package sys-fs/lvm2-2.02.67-r2:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Building shared LVM, it will not work inside genkernel!

 * USE flag nocman is deprecated and replaced
 * with the cman USE flag.
 * 
 * USE flags clvm and cman are masked
 * by default and need to be unmasked to use them
 * 
 * If you are using genkernel and root-on-LVM, rebuild the initramfs.
 * lvm volumes are no longer automatically created for
 * baselayout-2 users. If you are using baselayout-2, be sure to
 * run: # rc-update add lvm boot
 * Do NOT add it if you are using baselayout-1 still.

 * Messages for package app-accessibility/brltty-4.2:

 * 
 * please be sure /etc/brltty.conf is correct for your system.
 * 
 * To make brltty start on boot, type this command as root:
 * 
 * rc-update add brltty boot

 * Messages for package app-misc/screen-4.0.3-r4:

 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.

 * Messages for package net-misc/ntp-4.2.6_p3:
 * You can find an example /etc/ntp.conf in /usr/share/ntp/
 * Review /etc/ntp.conf to setup server info.
 * Review /etc/conf.d/ntpd to setup init.d info.

 * The way ntp sets and maintains your system time has changed.
 * Now you can use /etc/init.d/ntp-client to set your time at
 * boot while you can use /etc/init.d/ntpd to maintain your time
 * while your machine runs

 * Messages for package app-misc/livecd-tools-1.0.42:
 * This package is designed for use on the LiveCD only and will do
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!


 * Messages for package net-dialup/rp-pppoe-3.8-r2:

 * Use pppoe-setup to configure your dialup connection.

 * Messages for package app-crypt/gnupg-2.0.17:

 * If you wish to view images emerge:
 * media-gfx/xloadimage, media-gfx/xli or any other viewer
 * Remember to use photo-viewer option in configuration file to activate
 * the right viewer.
 * Please remember to restart gpg-agent if a different version
 * of the agent is currently used. If you are unsure of the gpg
 * agent you are using please run 'killall gpg-agent',
 * and to start a fresh daemon just run 'gpg-agent --daemon'.

 * Messages for package app-admin/syslog-ng-3.1.4:

 * It is highly recommended that app-admin/logrotate be emerged to
 * manage the log files.  syslog-ng installs a file in /etc/logrotate.d
 * for logrotate to use.

 * Messages for package sys-fs/evms-2.5.5-r11:
 * ERROR: sys-fs/evms-2.5.5-r11 failed (compile phase):
 *   Failed emake
 * 
 * Call stack:
 *     ebuild.sh, line  56:  Called src_compile
 *   environment, line 3935:  Called die
 * The specific snippet of code:
 *       emake || die "Failed emake"
 * 
 * If you need support, post the output of 'emerge --info =sys-fs/evms-2.5.5-r11',
 * the complete build log and the output of 'emerge -pqv =sys-fs/evms-2.5.5-r11'.
 * The complete build log is located at '/var/tmp/portage/sys-fs/evms-2.5.5-r11/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-fs/evms-2.5.5-r11/temp/environment'.
 * S: '/var/tmp/portage/sys-fs/evms-2.5.5-r11/work/evms-2.5.5'

 * Regenerating GNU info directory index...
 * Processed 88 info files.

 * IMPORTANT: 3 news items need reading for repository 'gentoo'.
 * Use eselect news to read news items.


!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1362, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1367, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage1-ppc64-32ul-20110508/.catalyst_lock'



Full build log at /tmp/catalyst-auto.1002/log/installcd-stage1.log