1 |
21 Dec 2020 12:47:16 UTC: NOTICE : --- Running action sequence: chroot_setup |
2 |
21 Dec 2020 12:47:16 UTC: NOTICE : Setting up chroot... |
3 |
NOTICE:catalyst:Setting up chroot... |
4 |
21 Dec 2020 12:47:16 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
5 |
WARNING:catalyst:Overriding certain env variables may cause catastrophic failure. |
6 |
21 Dec 2020 12:47:16 UTC: WARNING : If your build fails look here first as the possible problem. |
7 |
WARNING:catalyst:If your build fails look here first as the possible problem. |
8 |
21 Dec 2020 12:47:16 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
9 |
WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables. |
10 |
21 Dec 2020 12:47:16 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
11 |
WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all. |
12 |
21 Dec 2020 12:47:16 UTC: WARNING : You have been warned. |
13 |
WARNING:catalyst:You have been warned. |
14 |
21 Dec 2020 12:47:16 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/etc/portage/make.conf |
15 |
NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/etc/portage/make.conf |
16 |
21 Dec 2020 12:47:16 UTC: NOTICE : STICKY-CONFIG is enabled |
17 |
NOTICE:catalyst:STICKY-CONFIG is enabled |
18 |
21 Dec 2020 12:47:16 UTC: NOTICE : --- Running action sequence: setup_environment |
19 |
NOTICE:catalyst:--- Running action sequence: setup_environment |
20 |
21 Dec 2020 12:47:16 UTC: NOTICE : --- Running action sequence: run_local |
21 |
NOTICE:catalyst:--- Running action sequence: run_local |
22 |
Copying stage2-chroot.sh to /tmp |
23 |
copying stage2-chroot.sh to /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/tmp |
24 |
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/tmp |
25 |
Ensure the file has the executable bit set |
26 |
Running stage2-chroot.sh in chroot: |
27 |
chroot /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z /tmp/stage2-chroot.sh |
28 |
>>> Regenerating /etc/ld.so.cache... |
29 |
|
30 |
Gentoo Linux; http://www.gentoo.org/ |
31 |
Copyright 1999-2020 Gentoo Authors; Distributed under the GPLv2 |
32 |
------------------------------------------------------------------------------- |
33 |
[[ (0/3) Locating packages ]] |
34 |
* Using baselayout : >=sys-apps/baselayout-2 |
35 |
* Using portage : sys-apps/portage |
36 |
* Using os-headers : >=sys-kernel/linux-headers-5.4-r1 |
37 |
* Using binutils : sys-devel/binutils |
38 |
* Using gcc : sys-devel/gcc |
39 |
* Using gettext : sys-devel/gettext |
40 |
* Using libc : sys-libs/glibc:2.2 |
41 |
* Using texinfo : sys-apps/texinfo |
42 |
* Using zlib : sys-libs/zlib |
43 |
* Using ncurses : sys-libs/ncurses |
44 |
------------------------------------------------------------------------------- |
45 |
[[ (1/3) Configuring environment ]] |
46 |
------------------------------------------------------------------------------- |
47 |
[[ (2/3) Updating portage ]] |
48 |
|
49 |
Performing Global Updates |
50 |
(Could take a couple of minutes if you have a lot of binary packages.) |
51 |
|
52 |
|
53 |
>>> Verifying ebuild manifests |
54 |
>>> Running pre-merge checks for sys-apps/portage-3.0.9 |
55 |
* Determining the location of the kernel source code |
56 |
* Unable to find kernel sources at /usr/src/linux |
57 |
* Please make sure that /usr/src/linux points at your running kernel, |
58 |
* (or the kernel you wish to build against). |
59 |
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location |
60 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
61 |
* Checking for suitable kernel configuration options... |
62 |
[ ok ] |
63 |
>>> Emerging (1 of 1) sys-apps/portage-3.0.9::gentoo |
64 |
>>> Installing (1 of 1) sys-apps/portage-3.0.9::gentoo |
65 |
* Messages for package sys-apps/portage-3.0.9: |
66 |
* Unable to find kernel sources at /usr/src/linux |
67 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
68 |
* Messages for package sys-apps/portage-3.0.9: |
69 |
* Unable to find kernel sources at /usr/src/linux |
70 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
71 |
|
72 |
|
73 |
|
74 |
|
75 |
------------------------------------------------------------------------------- |
76 |
[[ (3/3) Emerging packages ]] |
77 |
>>> Verifying ebuild manifests |
78 |
>>> Running pre-merge checks for sys-libs/glibc-2.32-r3 |
79 |
* Checking general environment sanity. |
80 |
x86_64-pc-linux-gnux32-gcc -O2 -pipe -Wl,-O1 -Wl,--as-needed glibc-test.c -o glibc-test |
81 |
* Checking that IA32 emulation is enabled in the running kernel ... |
82 |
[ ok ] |
83 |
* Checking gcc for __thread support ... |
84 |
[ ok ] |
85 |
* Checking running kernel version (4.14.34-gentoo-infra38 >= 3.2.0) ... |
86 |
[ ok ] |
87 |
* Checking linux-headers version (5.4.0 >= 3.2.0) ... |
88 |
[ ok ] |
89 |
>>> Running pre-merge checks for sys-devel/gcc-9.3.0-r2 |
90 |
>>> Emerging binary (1 of 17) sys-libs/zlib-1.2.11-r2::gentoo |
91 |
>>> Installing (1 of 17) sys-libs/zlib-1.2.11-r2::gentoo |
92 |
>>> Emerging binary (2 of 17) sys-kernel/linux-headers-5.4-r1::gentoo |
93 |
>>> Installing (2 of 17) sys-kernel/linux-headers-5.4-r1::gentoo |
94 |
>>> Emerging binary (3 of 17) sys-apps/baselayout-2.7::gentoo |
95 |
>>> Installing (3 of 17) sys-apps/baselayout-2.7::gentoo |
96 |
>>> Emerging binary (4 of 17) app-portage/elt-patches-20170815::gentoo |
97 |
>>> Installing (4 of 17) app-portage/elt-patches-20170815::gentoo |
98 |
>>> Emerging binary (5 of 17) sys-devel/binutils-2.34-r2::gentoo |
99 |
>>> Emerging binary (6 of 17) sys-devel/gettext-0.21::gentoo |
100 |
>>> Installing (6 of 17) sys-devel/gettext-0.21::gentoo |
101 |
>>> Installing (5 of 17) sys-devel/binutils-2.34-r2::gentoo |
102 |
>>> Emerging binary (7 of 17) virtual/perl-File-Spec-3.780.0-r1::gentoo |
103 |
>>> Installing (7 of 17) virtual/perl-File-Spec-3.780.0-r1::gentoo |
104 |
>>> Emerging binary (8 of 17) dev-perl/Text-Unidecode-1.300.0::gentoo |
105 |
>>> Emerging binary (9 of 17) virtual/perl-Carp-1.500.0-r3::gentoo |
106 |
>>> Installing (8 of 17) dev-perl/Text-Unidecode-1.300.0::gentoo |
107 |
>>> Emerging binary (10 of 17) virtual/perl-version-0.992.400-r1::gentoo |
108 |
>>> Emerging binary (11 of 17) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo |
109 |
>>> Installing (9 of 17) virtual/perl-Carp-1.500.0-r3::gentoo |
110 |
>>> Emerging binary (12 of 17) dev-perl/Class-Inspector-1.360.0::gentoo |
111 |
>>> Installing (10 of 17) virtual/perl-version-0.992.400-r1::gentoo |
112 |
>>> Emerging (13 of 17) sys-libs/glibc-2.32-r3::gentoo |
113 |
>>> Installing (12 of 17) dev-perl/Class-Inspector-1.360.0::gentoo |
114 |
>>> Installing (11 of 17) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo |
115 |
>>> Installing (13 of 17) sys-libs/glibc-2.32-r3::gentoo |
116 |
>>> Emerging binary (14 of 17) dev-perl/File-ShareDir-1.104.0::gentoo |
117 |
>>> Installing (14 of 17) dev-perl/File-ShareDir-1.104.0::gentoo |
118 |
>>> Emerging (15 of 17) sys-devel/gcc-9.3.0-r2::gentoo |
119 |
>>> Installing (15 of 17) sys-devel/gcc-9.3.0-r2::gentoo |
120 |
>>> Emerging binary (16 of 17) dev-perl/libintl-perl-1.310.0::gentoo |
121 |
>>> Failed to emerge dev-perl/libintl-perl-1.310.0, Log file: |
122 |
>>> '/var/tmp/portage/dev-perl/libintl-perl-1.310.0/temp/build.log' |
123 |
!!! Fetching Binary failed for 'dev-perl/libintl-perl-1.310.0' |
124 |
* Messages for package sys-apps/baselayout-2.7: |
125 |
* The following users have non-existent shells! |
126 |
* halt - /sbin/halt |
127 |
* shutdown - /sbin/shutdown |
128 |
* Messages for package sys-libs/glibc-2.32-r3: |
129 |
* Applying Gentoo Glibc Patchset 2.32-2 |
130 |
|
131 |
|
132 |
|
133 |
|
134 |
|
135 |
* IMPORTANT: config file '/etc/locale.gen' needs updating. |
136 |
* See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS |
137 |
* sections of the emerge man page to learn how to update config files. |
138 |
21 Dec 2020 14:39:09 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1 |
139 |
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1 |
140 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/tmp/portage is not a mount point. Skipping |
141 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/tmp/portage is not a mount point. Skipping |
142 |
21 Dec 2020 14:39:10 UTC: ERROR : CatalystError: Stage build aborting due to error. |
143 |
ERROR:catalyst:CatalystError: Stage build aborting due to error. |
144 |
21 Dec 2020 14:39:10 UTC: ERROR : Exception running action sequence run_local |
145 |
Traceback (most recent call last): |
146 |
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1410, in run_local |
147 |
env=self.env) |
148 |
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 54, in cmd |
149 |
print_traceback=False) |
150 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1 |
151 |
|
152 |
During handling of the above exception, another exception occurred: |
153 |
|
154 |
Traceback (most recent call last): |
155 |
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in run |
156 |
getattr(self, x)() |
157 |
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1419, in run_local |
158 |
print_traceback=False) |
159 |
catalyst.support.CatalystError: Stage build aborting due to error. |
160 |
ERROR:catalyst:Exception running action sequence run_local |
161 |
Traceback (most recent call last): |
162 |
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1410, in run_local |
163 |
env=self.env) |
164 |
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 54, in cmd |
165 |
print_traceback=False) |
166 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1 |
167 |
|
168 |
During handling of the above exception, another exception occurred: |
169 |
|
170 |
Traceback (most recent call last): |
171 |
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in run |
172 |
getattr(self, x)() |
173 |
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1419, in run_local |
174 |
print_traceback=False) |
175 |
catalyst.support.CatalystError: Stage build aborting due to error. |
176 |
21 Dec 2020 14:39:10 UTC: NOTICE : Cleaning up... Running unbind() |
177 |
NOTICE:catalyst:Cleaning up... Running unbind() |
178 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/tmp/kerncache is not a mount point. Skipping |
179 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/tmp/kerncache is not a mount point. Skipping |
180 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/cache/binpkgs is not a mount point. Skipping |
181 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/cache/binpkgs is not a mount point. Skipping |
182 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/run is not a mount point. Skipping |
183 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/run is not a mount point. Skipping |
184 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/dev/shm does not exist. Skipping |
185 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/dev/shm does not exist. Skipping |
186 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/dev/pts does not exist. Skipping |
187 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/dev/pts does not exist. Skipping |
188 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/tmp/portage is not a mount point. Skipping |
189 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/tmp/portage is not a mount point. Skipping |
190 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/cache/distfiles is not a mount point. Skipping |
191 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/cache/distfiles is not a mount point. Skipping |
192 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/db/repos/gentoo is not a mount point. Skipping |
193 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/var/db/repos/gentoo is not a mount point. Skipping |
194 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/dev is not a mount point. Skipping |
195 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/dev is not a mount point. Skipping |
196 |
21 Dec 2020 14:39:10 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/proc is not a mount point. Skipping |
197 |
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-x32-20201220T214503Z/proc is not a mount point. Skipping |
198 |
Command exited with non-zero status 2 |
199 |
17278.78user 3295.58system 1:51:57elapsed 306%CPU (0avgtext+0avgdata 583144maxresident)k |
200 |
44872inputs+19625744outputs (22major+470500930minor)pagefaults 0swaps |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /release/tmp/run/catalyst-auto.20201220T214503Z.wzR8WF/log/stage2-x32.log |