1 |
* into effect. |
2 |
* The method you use to do this depends on your init system. |
3 |
* For sys-apps/openrc users it is: |
4 |
* # /etc/init.d/udev --nodeps restart |
5 |
* |
6 |
* For more information on udev on Gentoo, upgrading, writing udev rules, and |
7 |
* fixing known issues visit: |
8 |
* http://wiki.gentoo.org/wiki/Udev |
9 |
* http://wiki.gentoo.org/wiki/Udev/upgrade |
10 |
|
11 |
* Messages for package dev-libs/glib-2.42.2: |
12 |
|
13 |
* Unable to find kernel sources at /usr/src/linux |
14 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
15 |
|
16 |
* Messages for package dev-perl/Module-Build-0.420.500: |
17 |
|
18 |
* This package will overwrite one or more files that may belong to other |
19 |
* packages (see list below). |
20 |
* |
21 |
* Detected file collision(s): |
22 |
* |
23 |
* /usr/bin/config_data |
24 |
* |
25 |
* Searching all installed packages for file collisions... |
26 |
* |
27 |
* Press Ctrl-C to Stop |
28 |
* |
29 |
* None of the installed packages claim the file(s). |
30 |
* |
31 |
* Package 'dev-perl/Module-Build-0.420.500' merged despite file |
32 |
* collisions. If necessary, refer to your elog messages for the whole |
33 |
* content of the above message. |
34 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
35 |
>>> Verifying ebuild manifests |
36 |
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/ |
37 |
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/ |
38 |
|
39 |
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/: |
40 |
|
41 |
* Initializing /tmp/stage1root/lib as a dir |
42 |
* Initializing /tmp/stage1root/usr/lib as a dir |
43 |
* Initializing /tmp/stage1root/usr/local/lib as a dir |
44 |
* Your system profile has SYMLINK_LIB=no, so that means you need to |
45 |
* have these paths configured as follows: |
46 |
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib |
47 |
* The ebuild will attempt to fix these, but only for trivial conversions. |
48 |
* If things fail, you will need to manually create/move the directories. |
49 |
* Converting /tmp/stage1root/lib from a symlink to a dir |
50 |
* Converting /tmp/stage1root/usr/lib from a symlink to a dir |
51 |
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir |
52 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc |
53 |
>>> Verifying ebuild manifests |
54 |
>>> Running pre-merge checks for sys-devel/gcc-4.8.4 |
55 |
>>> Emerging (1 of 80) sys-libs/zlib-1.2.8-r1::gentoo for /tmp/stage1root/ |
56 |
>>> Installing (1 of 80) sys-libs/zlib-1.2.8-r1::gentoo to /tmp/stage1root/ |
57 |
>>> Emerging (2 of 80) sys-libs/ncurses-5.9-r3::gentoo for /tmp/stage1root/ |
58 |
>>> Installing (2 of 80) sys-libs/ncurses-5.9-r3::gentoo to /tmp/stage1root/ |
59 |
>>> Emerging (3 of 80) app-arch/bzip2-1.0.6-r6::gentoo for /tmp/stage1root/ |
60 |
>>> Installing (3 of 80) app-arch/bzip2-1.0.6-r6::gentoo to /tmp/stage1root/ |
61 |
>>> Emerging (4 of 80) virtual/libiconv-0-r2::gentoo for /tmp/stage1root/ |
62 |
>>> Installing (4 of 80) virtual/libiconv-0-r2::gentoo to /tmp/stage1root/ |
63 |
>>> Emerging (5 of 80) sys-devel/gnuconfig-20150304::gentoo for /tmp/stage1root/ |
64 |
>>> Installing (5 of 80) sys-devel/gnuconfig-20150304::gentoo to /tmp/stage1root/ |
65 |
>>> Emerging (6 of 80) virtual/libintl-0-r1::gentoo for /tmp/stage1root/ |
66 |
>>> Installing (6 of 80) virtual/libintl-0-r1::gentoo to /tmp/stage1root/ |
67 |
>>> Emerging (7 of 80) app-arch/xz-utils-5.0.8::gentoo for /tmp/stage1root/ |
68 |
>>> Installing (7 of 80) app-arch/xz-utils-5.0.8::gentoo to /tmp/stage1root/ |
69 |
>>> Emerging (8 of 80) sys-apps/sed-4.2.1-r1::gentoo for /tmp/stage1root/ |
70 |
>>> Installing (8 of 80) sys-apps/sed-4.2.1-r1::gentoo to /tmp/stage1root/ |
71 |
>>> Emerging (9 of 80) sys-apps/file-5.22::gentoo for /tmp/stage1root/ |
72 |
>>> Installing (9 of 80) sys-apps/file-5.22::gentoo to /tmp/stage1root/ |
73 |
>>> Emerging (10 of 80) sys-devel/gcc-config-1.7.3::gentoo for /tmp/stage1root/ |
74 |
>>> Installing (10 of 80) sys-devel/gcc-config-1.7.3::gentoo to /tmp/stage1root/ |
75 |
>>> Emerging (11 of 80) sys-libs/timezone-data-2015b::gentoo for /tmp/stage1root/ |
76 |
>>> Installing (11 of 80) sys-libs/timezone-data-2015b::gentoo to /tmp/stage1root/ |
77 |
>>> Emerging (12 of 80) app-misc/editor-wrapper-4::gentoo for /tmp/stage1root/ |
78 |
>>> Installing (12 of 80) app-misc/editor-wrapper-4::gentoo to /tmp/stage1root/ |
79 |
>>> Emerging (13 of 80) dev-libs/popt-1.16-r2::gentoo for /tmp/stage1root/ |
80 |
* The ebuild phase 'configure' has exited unexpectedly. This type of |
81 |
* behavior is known to be triggered by things such as failed variable |
82 |
* assignments (bug #190128) or bad substitution errors (bug #200313). |
83 |
* Normally, before exiting, bash should have displayed an error message |
84 |
* above. If bash did not produce an error message above, it's possible |
85 |
* that the ebuild has called `exit` when it should have called `die` |
86 |
* instead. This behavior may also be triggered by a corrupt bash binary or |
87 |
* a hardware problem such as memory or cpu malfunction. If the problem is |
88 |
* not reproducible or it appears to occur randomly, then it is likely to |
89 |
* be triggered by a hardware problem. If you suspect a hardware problem |
90 |
* then you should try some basic hardware diagnostics such as memtest. |
91 |
* Please do not report this as a bug unless it is consistently |
92 |
* reproducible and you are sure that your bash binary and hardware are |
93 |
* functioning properly. |
94 |
* The ebuild phase 'die_hooks' has been aborted since PORTAGE_BUILDDIR |
95 |
* does not exist: '/var/tmp/portage/dev-libs/popt-1.16-r2' |
96 |
|
97 |
* Messages for package sys-libs/timezone-data-2015b merged to /tmp/stage1root/: |
98 |
|
99 |
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone. |
100 |
* Setting /tmp/stage1root/etc/localtime to Factory. |
101 |
|
102 |
* Messages for package dev-libs/popt-1.16-r2 merged to /tmp/stage1root/: |
103 |
|
104 |
* The ebuild phase 'configure' has exited unexpectedly. This type of |
105 |
* behavior is known to be triggered by things such as failed variable |
106 |
* assignments (bug #190128) or bad substitution errors (bug #200313). |
107 |
* Normally, before exiting, bash should have displayed an error message |
108 |
* above. If bash did not produce an error message above, it's possible |
109 |
* that the ebuild has called `exit` when it should have called `die` |
110 |
* instead. This behavior may also be triggered by a corrupt bash binary or |
111 |
* a hardware problem such as memory or cpu malfunction. If the problem is |
112 |
* not reproducible or it appears to occur randomly, then it is likely to |
113 |
* be triggered by a hardware problem. If you suspect a hardware problem |
114 |
* then you should try some basic hardware diagnostics such as memtest. |
115 |
* Please do not report this as a bug unless it is consistently |
116 |
* reproducible and you are sure that your bash binary and hardware are |
117 |
* functioning properly. |
118 |
Traceback (most recent call last): |
119 |
File "/usr/lib/python-exec/python2.7/emerge", line 50, in <module> |
120 |
retval = emerge_main() |
121 |
File "/usr/lib/python2.7/site-packages/_emerge/main.py", line 1154, in emerge_main |
122 |
return run_action(emerge_config) |
123 |
File "/usr/lib/python2.7/site-packages/_emerge/actions.py", line 3188, in run_action |
124 |
emerge_config.args, spinner) |
125 |
File "/usr/lib/python2.7/site-packages/_emerge/actions.py", line 495, in action_build |
126 |
retval = mergetask.merge() |
127 |
File "/usr/lib/python2.7/site-packages/_emerge/Scheduler.py", line 1023, in merge |
128 |
rval = self._merge() |
129 |
File "/usr/lib/python2.7/site-packages/_emerge/Scheduler.py", line 1412, in _merge |
130 |
self._main_loop() |
131 |
File "/usr/lib/python2.7/site-packages/_emerge/Scheduler.py", line 1383, in _main_loop |
132 |
self._event_loop.iteration() |
133 |
File "/usr/lib/python2.7/site-packages/portage/util/_eventloop/EventLoop.py", line 204, in iteration |
134 |
if self._run_timeouts(): |
135 |
File "/usr/lib/python2.7/site-packages/portage/util/_eventloop/EventLoop.py", line 468, in _run_timeouts |
136 |
if self._run_idle_callbacks(): |
137 |
File "/usr/lib/python2.7/site-packages/portage/util/_eventloop/EventLoop.py", line 430, in _run_idle_callbacks |
138 |
if not x.callback(*x.args): |
139 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 74, in _async_wait_cb |
140 |
self.wait() |
141 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 57, in wait |
142 |
self._wait_hook() |
143 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 175, in _wait_hook |
144 |
self._exit_listener_stack.pop()(self) |
145 |
File "/usr/lib/python2.7/site-packages/_emerge/EbuildPhase.py", line 345, in _die_hooks_exit |
146 |
self.wait() |
147 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 57, in wait |
148 |
self._wait_hook() |
149 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 175, in _wait_hook |
150 |
self._exit_listener_stack.pop()(self) |
151 |
File "/usr/lib/python2.7/site-packages/_emerge/TaskSequence.py", line 47, in _task_exit_handler |
152 |
self.wait() |
153 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 57, in wait |
154 |
self._wait_hook() |
155 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 175, in _wait_hook |
156 |
self._exit_listener_stack.pop()(self) |
157 |
File "/usr/lib/python2.7/site-packages/_emerge/CompositeTask.py", line 134, in _default_final_exit |
158 |
return self.wait() |
159 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 57, in wait |
160 |
self._wait_hook() |
161 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 175, in _wait_hook |
162 |
self._exit_listener_stack.pop()(self) |
163 |
File "/usr/lib/python2.7/site-packages/_emerge/EbuildBuild.py", line 294, in _build_exit |
164 |
self._unlock_builddir() |
165 |
File "/usr/lib/python2.7/site-packages/_emerge/EbuildBuild.py", line 290, in _unlock_builddir |
166 |
self._build_dir.unlock() |
167 |
File "/usr/lib/python2.7/site-packages/_emerge/EbuildBuildDir.py", line 96, in unlock |
168 |
catdir_lock.start() |
169 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 30, in start |
170 |
self._start() |
171 |
File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousLock.py", line 47, in _start |
172 |
wantnewlockfile=True, flags=os.O_NONBLOCK) |
173 |
File "/usr/lib/python2.7/site-packages/portage/locks.py", line 102, in lockfile |
174 |
raise DirectoryNotFound(os.path.dirname(mypath)) |
175 |
DirectoryNotFound: /var/tmp/portage |
176 |
|
177 |
!!! catalyst: run script failed. |
178 |
|
179 |
|
180 |
Traceback (most recent call last): |
181 |
File "modules/generic_stage_target.py", line 1244, in run_local |
182 |
"run script failed.",env=self.env) |
183 |
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd |
184 |
raise CatalystError,myexc |
185 |
CatalystError |
186 |
None |
187 |
|
188 |
!!! catalyst: Stage build aborting due to error. |
189 |
|
190 |
Traceback (most recent call last): |
191 |
File "/usr/lib/catalyst/catalyst", line 218, in build_target |
192 |
mytarget.run() |
193 |
File "modules/generic_stage_target.py", line 1304, in run |
194 |
apply(getattr(self,x)) |
195 |
File "modules/generic_stage_target.py", line 1249, in run_local |
196 |
raise CatalystError,"Stage build aborting due to error." |
197 |
CatalystError |
198 |
!!! catalyst: Error encountered during run of target stage1 |
199 |
Catalyst aborting.... |
200 |
lockfile does not exist '/usr/local/catalyst/tmp/default/stage1-hppa1.1-20150619/.catalyst_lock' |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /tmp/catalyst-auto.8QofVg/log/hppa1.1_stage1.log |