1 |
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec |
2 |
26 Oct 2019 03:30:45 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf |
3 |
26 Oct 2019 03:30:45 EDT: NOTICE : conf_values[options] = {'snapcache', 'autoresume', 'pkgcache', 'kerncache', 'bindist', 'clear-autoresume'} |
4 |
26 Oct 2019 03:30:45 EDT: NOTICE : Processing spec file: stage1.spec |
5 |
26 Oct 2019 03:30:45 EDT: NOTICE : Using target: stage1 |
6 |
26 Oct 2019 03:30:45 EDT: NOTICE : Source file specification matching setting is: strict |
7 |
26 Oct 2019 03:30:45 EDT: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz'] |
8 |
26 Oct 2019 03:30:50 EDT: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-s390x-latest.tar.xz |
9 |
26 Oct 2019 03:30:50 EDT: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390x-20191026T072703Z/tmp/stage1root |
10 |
26 Oct 2019 03:30:50 EDT: NOTICE : Removing AutoResume Points ... |
11 |
26 Oct 2019 03:30:50 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390x-20191026T072703Z |
12 |
26 Oct 2019 03:30:50 EDT: NOTICE : --- Running action sequence: unpack |
13 |
26 Oct 2019 03:30:50 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled |
14 |
26 Oct 2019 03:30:50 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up... |
15 |
26 Oct 2019 03:30:50 EDT: NOTICE : Removing AutoResume Points ... |
16 |
26 Oct 2019 03:30:50 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390x-20191026T072703Z |
17 |
26 Oct 2019 03:30:50 EDT: NOTICE : Clearing the chroot path ... |
18 |
26 Oct 2019 03:30:50 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage1-s390x-20191026T072703Z |
19 |
26 Oct 2019 03:30:50 EDT: NOTICE : Starting auto from /var/tmp/catalyst/builds/default/stage3-s390x-latest.tar.xz |
20 |
26 Oct 2019 03:30:50 EDT: NOTICE : to /var/tmp/catalyst/tmp/default/stage1-s390x-20191026T072703Z (this may take some time) .. |
21 |
26 Oct 2019 03:31:14 EDT: NOTICE : --- Running action sequence: unpack_snapshot |
22 |
26 Oct 2019 03:31:14 EDT: NOTICE : Unpacking portage tree (this can take a long time) ... |
23 |
26 Oct 2019 03:31:51 EDT: NOTICE : --- Running action sequence: setup_confdir |
24 |
26 Oct 2019 03:31:51 EDT: NOTICE : --- Running action sequence: portage_overlay |
25 |
26 Oct 2019 03:31:51 EDT: NOTICE : --- Running action sequence: base_dirs |
26 |
26 Oct 2019 03:31:51 EDT: NOTICE : --- Running action sequence: bind |
27 |
26 Oct 2019 03:31:51 EDT: NOTICE : --- Running action sequence: chroot_setup |
28 |
26 Oct 2019 03:31:51 EDT: NOTICE : Setting up chroot... |
29 |
26 Oct 2019 03:31:51 EDT: WARNING : Overriding certain env variables may cause catastrophic failure. |
30 |
26 Oct 2019 03:31:51 EDT: WARNING : If your build fails look here first as the possible problem. |
31 |
26 Oct 2019 03:31:51 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
32 |
26 Oct 2019 03:31:51 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
33 |
26 Oct 2019 03:31:51 EDT: WARNING : You have been warned. |
34 |
26 Oct 2019 03:31:51 EDT: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage1-s390x-20191026T072703Z/etc/portage/make.conf |
35 |
26 Oct 2019 03:31:51 EDT: NOTICE : STICKY-CONFIG is enabled |
36 |
26 Oct 2019 03:31:51 EDT: NOTICE : --- Running action sequence: setup_environment |
37 |
26 Oct 2019 03:31:51 EDT: NOTICE : --- Running action sequence: run_local |
38 |
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390x-20191026T072703Z/tmp/stage1root/etc/portage |
39 |
Copying stage1-chroot.sh to /tmp |
40 |
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390x-20191026T072703Z/tmp |
41 |
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390x-20191026T072703Z/tmp |
42 |
Ensure the file has the executable bit set |
43 |
Running stage1-chroot.sh in chroot: |
44 |
chroot /var/tmp/catalyst/tmp/default/stage1-s390x-20191026T072703Z /tmp/stage1-chroot.sh |
45 |
>>> Regenerating /etc/ld.so.cache... |
46 |
Adding USE="${USE} build" to make.conf for portage build |
47 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
48 |
|
49 |
Performing Global Updates |
50 |
(Could take a couple of minutes if you have a lot of binary packages.) |
51 |
|
52 |
|
53 |
>>> Verifying ebuild manifests |
54 |
>>> Running pre-merge checks for sys-apps/portage-2.3.76 |
55 |
* Determining the location of the kernel source code |
56 |
* Unable to find kernel sources at /usr/src/linux |
57 |
* Please make sure that /usr/src/linux points at your running kernel, |
58 |
* (or the kernel you wish to build against). |
59 |
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location |
60 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
61 |
* Unable to check for the following kernel config options due |
62 |
* to absence of any configured kernel sources or compiled |
63 |
* config: |
64 |
* - IPC_NS |
65 |
* - PID_NS |
66 |
* - NET_NS |
67 |
* You're on your own to make sure they are set if needed. |
68 |
>>> Emerging (1 of 1) sys-apps/portage-2.3.76::gentoo |
69 |
>>> Installing (1 of 1) sys-apps/portage-2.3.76::gentoo |
70 |
* Messages for package sys-apps/portage-2.3.76: |
71 |
* Unable to find kernel sources at /usr/src/linux |
72 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
73 |
* Unable to check for the following kernel config options due |
74 |
* to absence of any configured kernel sources or compiled |
75 |
* config: |
76 |
* - IPC_NS |
77 |
* - PID_NS |
78 |
* - NET_NS |
79 |
* You're on your own to make sure they are set if needed. |
80 |
|
81 |
|
82 |
Updating seed stage... |
83 |
emerge --quiet --buildpkg=n --update --deep @world --jobs 2 --load-average 2 |
84 |
[ebuild U ] sys-libs/timezone-data-2019c [2019b-r1] |
85 |
[ebuild N ] virtual/perl-Carp-1.500.0-r1 |
86 |
[ebuild N ] virtual/perl-IO-1.390.0 |
87 |
[ebuild N ] virtual/perl-Exporter-5.730.0-r1 |
88 |
[ebuild N ] dev-perl/Class-Inspector-1.320.0 |
89 |
[ebuild N ] dev-perl/File-ShareDir-Install-0.110.0 |
90 |
[ebuild N ] dev-perl/File-ShareDir-1.104.0 |
91 |
[ebuild U ] dev-perl/libintl-perl-1.310.0 [1.280.0] |
92 |
|
93 |
The following keyword changes are necessary to proceed: |
94 |
(see "package.accept_keywords" in the portage(5) man page for more details) |
95 |
# required by dev-perl/File-ShareDir-1.104.0::gentoo |
96 |
# required by dev-perl/libintl-perl-1.310.0::gentoo[-minimal] |
97 |
# required by sys-apps/texinfo-6.6-r1::gentoo |
98 |
# required by sys-fs/e2fsprogs-1.45.4::gentoo |
99 |
# required by @system |
100 |
# required by @world (argument) |
101 |
=dev-perl/Class-Inspector-1.320.0 ~s390 |
102 |
# required by dev-perl/File-ShareDir-1.104.0::gentoo |
103 |
# required by dev-perl/libintl-perl-1.310.0::gentoo[-minimal] |
104 |
# required by sys-apps/texinfo-6.6-r1::gentoo |
105 |
# required by sys-fs/e2fsprogs-1.45.4::gentoo |
106 |
# required by @system |
107 |
# required by @world (argument) |
108 |
=dev-perl/File-ShareDir-Install-0.110.0 ~s390 |
109 |
|
110 |
Use --autounmask-write to write changes to config files (honoring |
111 |
CONFIG_PROTECT). Carefully examine the list of proposed changes, |
112 |
paying special attention to mask or keyword changes that may expose |
113 |
experimental or unstable packages. |
114 |
26 Oct 2019 03:32:48 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
115 |
26 Oct 2019 03:32:48 EDT: ERROR : CatalystError: Stage build aborting due to error. |
116 |
26 Oct 2019 03:32:48 EDT: ERROR : Exception running action sequence run_local |
117 |
Traceback (most recent call last): |
118 |
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local |
119 |
env=self.env) |
120 |
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd |
121 |
print_traceback=False) |
122 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
123 |
|
124 |
During handling of the above exception, another exception occurred: |
125 |
|
126 |
Traceback (most recent call last): |
127 |
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run |
128 |
getattr(self, x)() |
129 |
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local |
130 |
print_traceback=False) |
131 |
catalyst.support.CatalystError: Stage build aborting due to error. |
132 |
26 Oct 2019 03:32:48 EDT: NOTICE : Cleaning up... Running unbind() |
133 |
Command exited with non-zero status 2 |
134 |
44.64user 10.08system 2:03.76elapsed 44%CPU (0avgtext+0avgdata 565568maxresident)k |
135 |
0inputs+0outputs (423major+2365969minor)pagefaults 0swaps |
136 |
|
137 |
|
138 |
|
139 |
Full build log at /tmp/catalyst-auto.20191026T072703Z.5fcYkV/log/stage1.log |