1 |
* Messages for package sys-apps/keyutils-1.5.9-r1: |
2 |
* Unable to find kernel sources at /usr/src/linux |
3 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
4 |
* Messages for package sys-apps/chname-1.0-r2: |
5 |
* Note: chname requires a or later kernel with CONFIG_UTS_NS=y. |
6 |
* Messages for package sys-block/tw_cli-10.2: |
7 |
* This binary supports should support ALL cards, including, but not |
8 |
* limited to the following series: |
9 |
* |
10 |
* PATA: 6xxx, 72xx, 74xx, 78xx, 7000, 7500, 7506 |
11 |
* SATA: 8006, 8500, 8506, 9500S, 9550SX, 9590SE, |
12 |
* 9550SXU, 9650SE, 9650SE-{24M8,4LPME}, |
13 |
* 9690SA, 9750 |
14 |
* |
15 |
* Release notes for this version are available at: |
16 |
* http://www.lsi.com/DistributionSystem/AssetDocument/10.2_Release_Notes_Web.pdf |
17 |
* Upstream's 10.2 release is missing the tw_cli manpage. |
18 |
* Messages for package sys-apps/busybox-1.24.2: |
19 |
* Could not locate user configfile, so we will save a default one |
20 |
* You cannot have USE='static pam'. Assuming static is more important. |
21 |
* Your configuration for sys-apps/busybox-1.24.2 has been saved in |
22 |
* /etc/portage/savedconfig/sys-apps/busybox-1.24.2 for your editing pleasure. |
23 |
* You can edit these files by hand and remerge this package with |
24 |
* USE=savedconfig to customise the configuration. |
25 |
* You can rename this file/directory to one of the following for |
26 |
* its configuration to apply to multiple versions: |
27 |
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ |
28 |
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] |
29 |
* Messages for package net-dialup/ppp-2.4.7: |
30 |
* Unable to find kernel sources at /usr/src/linux |
31 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
32 |
* Pon, poff and plog scripts have been supplied for experienced users. |
33 |
* Users needing particular scripts (ssh,rsh,etc.) should check out the |
34 |
* /usr/share/doc/ppp-2.4.7/scripts directory. |
35 |
* Messages for package net-misc/bridge-utils-1.5: |
36 |
* Unable to find kernel sources at /usr/src/linux |
37 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
38 |
* Messages for package app-misc/screen-4.3.1-r1: |
39 |
* Some dangerous key bindings have been removed or changed to more safe values. |
40 |
* We enable some xterm hacks in our default screenrc, which might break some |
41 |
* applications. Please check /etc/screenrc for information on these changes. |
42 |
* This revision changes the screen socket location to /tmp/screen |
43 |
* Messages for package net-dialup/rp-pppoe-3.11-r3: |
44 |
* Use pppoe-setup to configure your dialup connection |
45 |
* |
46 |
* (Note: Above message is only printed the first time package is |
47 |
* installed. Please look at /usr/share/doc/rp-pppoe-3.11-r3/README.gentoo* |
48 |
* for future reference) |
49 |
* Messages for package net-fs/cifs-utils-6.4: |
50 |
* Unable to find kernel sources at /usr/src/linux |
51 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
52 |
* You must enable CIFS support in your kernel config, |
53 |
* to be able to mount samba shares. You can find it at |
54 |
* |
55 |
* File systems |
56 |
* Network File Systems |
57 |
* CIFS support |
58 |
* |
59 |
* and recompile your kernel ... |
60 |
* setuid use flag was dropped due to multiple security implications |
61 |
* such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586 |
62 |
* You are free to set setuid flags by yourself |
63 |
* Messages for package app-emacs/emacs-common-gentoo-1.5: |
64 |
* All site initialisation for Gentoo-installed packages is added to |
65 |
* /usr/share/emacs/site-lisp/site-gentoo.el. In order for this site |
66 |
* initialisation to be loaded for all users automatically, a default |
67 |
* site startup file /etc/emacs/site-start.el is installed. You are |
68 |
* responsible for maintenance of this file. |
69 |
* |
70 |
* Alternatively, individual users can add the following command: |
71 |
* |
72 |
* (require 'site-gentoo) |
73 |
* |
74 |
* to their ~/.emacs initialisation files, or, for greater flexibility, |
75 |
* users may load single package-specific initialisation files from the |
76 |
* /usr/share/emacs/site-lisp/site-gentoo.d/ directory. |
77 |
* |
78 |
* (Note: Above message is only printed the first time package is |
79 |
* installed. Please look at /usr/share/doc/emacs-common-gentoo-1.5/README.gentoo* |
80 |
* for future reference) |
81 |
* Messages for package dev-util/ctags-5.8: |
82 |
* You can set the version to be started by /usr/bin/ctags through |
83 |
* the ctags eselect module. "man ctags.eselect" for details. |
84 |
* Messages for package sys-apps/openrc-0.19.1: |
85 |
* In this version of OpenRC, the loopback interface no longer |
86 |
* satisfies the net virtual. |
87 |
* If you have services now which do not start because of this, |
88 |
* They can be fixed by adding rc_need="!net" |
89 |
* to the /etc/conf.d/<servicename> file. |
90 |
* You should also file a bug against the service asking that |
91 |
* need net be dropped from the dependencies. |
92 |
* The bug you file should block the following tracker: |
93 |
* https://bugs.gentoo.org/show_bug.cgi?id=439092 |
94 |
* |
95 |
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not |
96 |
* fixed correctly in earlier versions of OpenRC. |
97 |
* The correct fix is implemented in this version, but that |
98 |
* means netmount needs to be added to the default runlevel if |
99 |
* you are using nfs file systems. |
100 |
* |
101 |
* You should now update all files in /etc, using etc-update |
102 |
* or equivalent before restarting any services or this host. |
103 |
* Messages for package sys-fs/fuse-2.9.4: |
104 |
* Unable to find kernel sources at /usr/src/linux |
105 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
106 |
* Messages for package dev-python/jinja-2.8: |
107 |
* For i18n support, please emerge dev-python/Babel. |
108 |
* Messages for package dev-python/cryptography-1.1.2: |
109 |
* ERROR: dev-python/cryptography-1.1.2::gentoo failed (compile phase): |
110 |
* (no error message) |
111 |
* |
112 |
* Call stack: |
113 |
* ebuild.sh, line 133: Called src_compile |
114 |
* environment, line 3664: Called distutils-r1_src_compile |
115 |
* environment, line 959: Called _distutils-r1_run_foreach_impl 'distutils-r1_python_compile' |
116 |
* environment, line 359: Called python_foreach_impl 'distutils-r1_run_phase' 'distutils-r1_python_compile' |
117 |
* environment, line 3199: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile' |
118 |
* environment, line 2308: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile' |
119 |
* environment, line 2306: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'distutils-r1_python_compile' |
120 |
* environment, line 626: Called distutils-r1_run_phase 'distutils-r1_python_compile' |
121 |
* environment, line 950: Called distutils-r1_python_compile |
122 |
* environment, line 825: Called esetup.py 'build' |
123 |
* environment, line 1452: Called die |
124 |
* The specific snippet of code: |
125 |
* "${@}" || die "${die_args[@]}"; |
126 |
* |
127 |
* If you need support, post the output of `emerge --info '=dev-python/cryptography-1.1.2::gentoo'`, |
128 |
* the complete build log and the output of `emerge -pqv '=dev-python/cryptography-1.1.2::gentoo'`. |
129 |
* The complete build log is located at '/var/tmp/portage/dev-python/cryptography-1.1.2/temp/build.log'. |
130 |
* The ebuild environment file is located at '/var/tmp/portage/dev-python/cryptography-1.1.2/temp/environment'. |
131 |
* Working directory: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2' |
132 |
* S: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2' |
133 |
|
134 |
|
135 |
|
136 |
|
137 |
|
138 |
|
139 |
|
140 |
|
141 |
|
142 |
|
143 |
|
144 |
|
145 |
|
146 |
|
147 |
|
148 |
|
149 |
|
150 |
|
151 |
|
152 |
|
153 |
|
154 |
|
155 |
|
156 |
|
157 |
|
158 |
|
159 |
|
160 |
|
161 |
|
162 |
|
163 |
|
164 |
|
165 |
|
166 |
|
167 |
|
168 |
|
169 |
|
170 |
|
171 |
|
172 |
|
173 |
|
174 |
!!! catalyst: Error in attempt to build packages |
175 |
|
176 |
|
177 |
Traceback (most recent call last): |
178 |
File "modules/generic_stage_target.py", line 1432, in build_packages |
179 |
"Error in attempt to build packages",env=self.env) |
180 |
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd |
181 |
raise CatalystError,myexc |
182 |
CatalystError |
183 |
None |
184 |
|
185 |
!!! catalyst: livecdbuild aborting due to error. |
186 |
|
187 |
Traceback (most recent call last): |
188 |
File "/usr/lib64/catalyst/catalyst", line 218, in build_target |
189 |
mytarget.run() |
190 |
File "modules/generic_stage_target.py", line 1333, in run |
191 |
apply(getattr(self,x)) |
192 |
File "modules/generic_stage_target.py", line 1437, in build_packages |
193 |
"build aborting due to error." |
194 |
CatalystError |
195 |
!!! catalyst: Error encountered during run of target livecd-stage1 |
196 |
Catalyst aborting.... |
197 |
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/livecd-stage1-x86-20160719/.catalyst_lock' |
198 |
Command exited with non-zero status 1 |
199 |
6442.52user 1061.70system 1:18:41elapsed 158%CPU (0avgtext+0avgdata 2410416maxresident)k |
200 |
92840inputs+11533384outputs (1major+299985200minor)pagefaults 0swaps |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /release/tmp/run/catalyst-auto.20160719.fCJGGv/log/hardened_admincd-stage1.log |