[gentoo-releng-autobuilds] [x86-auto] Catalyst non-fatal build error - installcd-stage1.spec

* Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package sys-fs/eudev-3.1.5:

 * 
 * As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
 * as described in the URL below:
 * https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * 
 * This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
 * between the default or user-modified choice of sys-fs/udev.  If you wish to disable
 * this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
 * exists: touch /etc/udev/rules.d/80-net-name-slot.rules
 * 

 * Messages for package net-misc/vconfig-1.9:

 * MTU problems exist for many ethernet drivers.
 * Reduce the MTU on the interface to 1496 to work around them.

 * Messages for package sys-apps/keyutils-1.5.9-r1:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package sys-apps/busybox-1.24.2:

 * Could not locate user configfile, so we will save a default one
 * You cannot have USE='static pam'.  Assuming static is more important.
 * Your configuration for sys-apps/busybox-1.24.2 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.24.2 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]

 * Messages for package net-dialup/ppp-2.4.7:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.7/scripts directory.

 * Messages for package app-misc/screen-4.3.1-r1:

 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.
 * This revision changes the screen socket location to /tmp/screen

 * Messages for package net-dialup/rp-pppoe-3.11-r3:

 * Use pppoe-setup to configure your dialup connection
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/rp-pppoe-3.11-r3/README.gentoo*
 * for future reference)

 * Messages for package net-fs/cifs-utils-6.4:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * You must enable CIFS support in your kernel config, 
 * to be able to mount samba shares. You can find it at
 * 
 *   File systems
 * 	Network File Systems
 * 			CIFS support
 * 
 * and recompile your kernel ...
 * setuid use flag was dropped due to multiple security implications
 * such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
 * You are free to set setuid flags by yourself

 * Messages for package sys-apps/openrc-0.19.1:

 * In this version of OpenRC, the loopback interface no longer
 * satisfies the net virtual.
 * If you have services now which do not start because of this,
 * They can be fixed by adding rc_need="!net"
 * to the /etc/conf.d/<servicename> file.
 * You should also file a bug against the service asking that
 * need net be dropped from the dependencies.
 * The bug you file should block the following tracker:
 * https://bugs.gentoo.org/show_bug.cgi?id=439092
 * 
 * Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
 * fixed correctly in earlier versions of OpenRC.
 * The correct fix is implemented in this version, but that
 * means netmount needs to be added to the default runlevel if
 * you are using nfs file systems.
 * 
 * You should now update all files in /etc, using etc-update
 * or equivalent before restarting any services or this host.

 * Messages for package sys-fs/fuse-2.9.4:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package app-accessibility/brltty-5.2-r1:

 * 
 * please be sure /etc/brltty.conf is correct for your system.
 * 
 * To make brltty start on boot, type this command as root:
 * 
 * rc-update add brltty boot

 * Messages for package app-admin/hddtemp-0.3_beta15-r7:

 * In order to update your hddtemp database, run:
 * emerge --config =app-admin/hddtemp-0.3_beta15-r7
 * 
 * If your hard drive is not recognized by hddtemp, please consider
 * submitting your HDD info for inclusion into the Gentoo hddtemp
 * database by filing a bug at https://bugs.gentoo.org/
 * 
 * If hddtemp complains but finds your HDD temperature sensor, use the
 * --quiet option to suppress the warning.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/hddtemp-0.3_beta15-r7/README.gentoo*
 * for future reference)

 * Messages for package sys-power/acpid-2.0.23:

 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * https://www.gentoo.org/doc/en/power-management-guide.xml
 * 
 * You should reboot the system now to get /run mounted with tmpfs!

 * Messages for package net-wireless/wpa_supplicant-2.5-r1:

 * If this is a clean installation of wpa_supplicant, you
 * have to create a configuration file named
 * /etc/wpa_supplicant/wpa_supplicant.conf
 * 
 * An example configuration file is available for reference in
 * /usr/share/doc/wpa_supplicant-2.5-r1/

 * Messages for package dev-python/cryptography-1.1.2:

 * ERROR: dev-python/cryptography-1.1.2::gentoo failed (compile phase):
 *   (no error message)
 * 
 * Call stack:
 *     ebuild.sh, line  133:  Called src_compile
 *   environment, line 3663:  Called distutils-r1_src_compile
 *   environment, line  958:  Called _distutils-r1_run_foreach_impl 'distutils-r1_python_compile'
 *   environment, line  358:  Called python_foreach_impl 'distutils-r1_run_phase' 'distutils-r1_python_compile'
 *   environment, line 3198:  Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile'
 *   environment, line 2307:  Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile'
 *   environment, line 2305:  Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'distutils-r1_python_compile'
 *   environment, line  625:  Called distutils-r1_run_phase 'distutils-r1_python_compile'
 *   environment, line  949:  Called distutils-r1_python_compile
 *   environment, line  824:  Called esetup.py 'build'
 *   environment, line 1451:  Called die
 * The specific snippet of code:
 *       "${@}" || die "${die_args[@]}";
 * 
 * If you need support, post the output of `emerge --info '=dev-python/cryptography-1.1.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-python/cryptography-1.1.2::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/dev-python/cryptography-1.1.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-python/cryptography-1.1.2/temp/environment'.
 * Working directory: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2'
 * S: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2'

!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1432, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1437, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20160719/.catalyst_lock'
Command exited with non-zero status 1
4031.35user 703.75system 46:02.99elapsed 171%CPU (0avgtext+0avgdata 2401824maxresident)k
48144inputs+9962912outputs (3major+218357932minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20160719.fCJGGv/log/installcd-stage1.log