1 |
18 Sep 2017 21:53:08 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf |
2 |
18 Sep 2017 21:53:08 UTC: NOTICE : Processing spec file: hardened/admincd-stage2-selinux.spec |
3 |
18 Sep 2017 21:53:08 UTC: NOTICE : Using target: livecd-stage2 |
4 |
18 Sep 2017 21:53:08 UTC: NOTICE : Source file specification matching setting is: loose |
5 |
18 Sep 2017 21:53:08 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar'] |
6 |
18 Sep 2017 21:53:09 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/livecd-stage1-amd64-latest-20170918.tar.xz |
7 |
18 Sep 2017 21:53:09 UTC: NOTICE : purge(); clearing autoresume ... |
8 |
18 Sep 2017 21:53:09 UTC: NOTICE : purge(); clearing chroot ... |
9 |
18 Sep 2017 21:53:09 UTC: NOTICE : Clearing the chroot path ... |
10 |
18 Sep 2017 21:53:09 UTC: NOTICE : purge(); clearing package cache ... |
11 |
18 Sep 2017 21:53:09 UTC: NOTICE : purging the pkgcache ... |
12 |
18 Sep 2017 21:53:09 UTC: NOTICE : purge(); clearing kerncache ... |
13 |
18 Sep 2017 21:53:09 UTC: NOTICE : --- Running action sequence: unpack |
14 |
18 Sep 2017 21:53:09 UTC: NOTICE : Clearing the chroot path ... |
15 |
18 Sep 2017 21:53:09 UTC: NOTICE : Starting auto from /home/release/buildroot/amd64-dev/builds/hardened/livecd-stage1-amd64-latest-20170918.tar.xz |
16 |
18 Sep 2017 21:53:09 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918 (this may take some time) .. |
17 |
18 Sep 2017 21:53:17 UTC: NOTICE : --- Running action sequence: unpack_snapshot |
18 |
18 Sep 2017 21:53:17 UTC: NOTICE : Unpacking portage tree (this can take a long time) ... |
19 |
18 Sep 2017 21:53:37 UTC: NOTICE : --- Running action sequence: config_profile_link |
20 |
18 Sep 2017 21:53:37 UTC: NOTICE : --- Running action sequence: setup_confdir |
21 |
18 Sep 2017 21:53:37 UTC: NOTICE : --- Running action sequence: portage_overlay |
22 |
18 Sep 2017 21:53:37 UTC: NOTICE : --- Running action sequence: bind |
23 |
18 Sep 2017 21:53:37 UTC: NOTICE : --- Running action sequence: chroot_setup |
24 |
18 Sep 2017 21:53:37 UTC: NOTICE : Setting up chroot... |
25 |
18 Sep 2017 21:53:37 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
26 |
18 Sep 2017 21:53:37 UTC: WARNING : If your build fails look here first as the possible problem. |
27 |
18 Sep 2017 21:53:37 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
28 |
18 Sep 2017 21:53:37 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
29 |
18 Sep 2017 21:53:37 UTC: WARNING : You have been warned. |
30 |
18 Sep 2017 21:53:37 UTC: NOTICE : --- Running action sequence: setup_environment |
31 |
18 Sep 2017 21:53:37 UTC: NOTICE : --- Running action sequence: run_local |
32 |
18 Sep 2017 21:53:37 UTC: NOTICE : --- Running action sequence: build_kernel |
33 |
Copying pre-kmerge.sh to /tmp |
34 |
copying pre-kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918/tmp |
35 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918/tmp |
36 |
Ensure the file has the executable bit set |
37 |
Running pre-kmerge.sh in chroot: |
38 |
chroot /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918 /tmp/pre-kmerge.sh |
39 |
>>> Regenerating /etc/ld.so.cache... |
40 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel |
41 |
>>> Verifying ebuild manifests |
42 |
>>> Running pre-merge checks for sys-kernel/genkernel-3.4.52.4-r2 |
43 |
>>> Emerging (1 of 1) sys-kernel/genkernel-3.4.52.4-r2::gentoo |
44 |
>>> Installing (1 of 1) sys-kernel/genkernel-3.4.52.4-r2::gentoo |
45 |
|
46 |
* Messages for package sys-kernel/genkernel-3.4.52.4-r2: |
47 |
|
48 |
* Documentation is available in the genkernel manual page |
49 |
* as well as the following URL: |
50 |
* https://wiki.gentoo.org/wiki/Genkernel |
51 |
* This package is known to not work with reiser4. If you are running |
52 |
* reiser4 and have a problem, do not file a bug. We know it does not |
53 |
* work and we don't plan on fixing it since reiser4 is the one that is |
54 |
* broken in this regard. Try using a sane filesystem like ext4. |
55 |
* The LUKS support has changed from versions prior to 3.4.4. Now, |
56 |
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah. |
57 |
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918/tmp/pre-kmerge.sh from the chroot |
58 |
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918/tmp/chroot-functions.sh from the chroot |
59 |
Copying kmerge.sh to /tmp |
60 |
copying kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918/tmp |
61 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918/tmp |
62 |
Ensure the file has the executable bit set |
63 |
Running kmerge.sh in chroot: |
64 |
chroot /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-latest-20170918 /tmp/kmerge.sh |
65 |
>>> Regenerating /etc/ld.so.cache... |
66 |
Genkernel version 3.4.52.4 found ... OK |
67 |
emerge --quiet --usepkg --buildpkg --newuse hardened-sources |
68 |
[ebuild N ] sys-devel/bc-1.06.95-r1 |
69 |
[ebuild N ] sys-kernel/hardened-sources-4.8.17-r2 |
70 |
|
71 |
The following mask changes are necessary to proceed: |
72 |
(see "package.unmask" in the portage(5) man page for more details) |
73 |
# required by hardened-sources (argument) |
74 |
# /usr/portage/profiles/package.mask: |
75 |
# Anthony G. Basile <blueness@g.o> (27 Aug 2017) |
76 |
# Upstream is no longer providing public patches |
77 |
=sys-kernel/hardened-sources-4.8.17-r2 |
78 |
|
79 |
Use --autounmask-write to write changes to config files (honoring |
80 |
CONFIG_PROTECT). Carefully examine the list of proposed changes, |
81 |
paying special attention to mask or keyword changes that may expose |
82 |
experimental or unstable packages. |
83 |
18 Sep 2017 21:54:19 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1 |
84 |
18 Sep 2017 21:54:19 UTC: ERROR : CatalystError: build aborting due to kernel build error. |
85 |
Traceback (most recent call last): |
86 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1532, in build_kernel |
87 |
self._build_kernel(kname = kname) |
88 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1569, in _build_kernel |
89 |
env=self.env) |
90 |
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd |
91 |
print_traceback=False) |
92 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1 |
93 |
18 Sep 2017 21:54:19 UTC: ERROR : Exception running action sequence build_kernel |
94 |
Traceback (most recent call last): |
95 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1532, in build_kernel |
96 |
self._build_kernel(kname = kname) |
97 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1569, in _build_kernel |
98 |
env=self.env) |
99 |
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd |
100 |
print_traceback=False) |
101 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1 |
102 |
|
103 |
During handling of the above exception, another exception occurred: |
104 |
|
105 |
Traceback (most recent call last): |
106 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run |
107 |
getattr(self, x)() |
108 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1538, in build_kernel |
109 |
print_traceback=True) |
110 |
catalyst.support.CatalystError: build aborting due to kernel build error. |
111 |
18 Sep 2017 21:54:19 UTC: NOTICE : Cleaning up... Running unbind() |
112 |
Command exited with non-zero status 2 |
113 |
51.60user 10.48system 1:11.42elapsed 86%CPU (0avgtext+0avgdata 374944maxresident)k |
114 |
328inputs+5766456outputs (0major+1421511minor)pagefaults 0swaps |
115 |
|
116 |
|
117 |
|
118 |
Full build log at /home/release/tmp/run/catalyst-auto.20170918.CzYFPY/log/hardened_admincd-stage2-selinux.log |