[gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - hppa1.1/stage1.spec

* Unable to establish //usr/share/man/man1/prove.1* symlink
 * Unable to establish //usr/share/man/man1/pod2man.1* symlink
 * Unable to establish //usr/share/man/man1/pod2text.1* symlink
 * Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink

 * Messages for package sys-fs/udev-216:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 *   CONFIG_IDE:	 should not be set. But it is.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.
 * 
 * Starting from version >= 197 the new predictable network interface names are
 * used by default, see:
 * http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
 * 
 * Example command to get the information for the new interface name before booting
 * (replace <ifname> with, for example, eth0):
 * # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
 * 
 * You can use either kernel parameter "net.ifnames=0", create empty
 * file /etc/systemd/network/99-default.link, or symlink it to /dev/null
 * to disable the feature.
 * 
 * You need to restart udev as soon as possible to make the upgrade go
 * into effect.
 * The method you use to do this depends on your init system.
 * For sys-apps/openrc users it is:
 * # /etc/init.d/udev --nodeps restart
 * 
 * For more information on udev on Gentoo, upgrading, writing udev rules, and
 * fixing known issues visit:
 * http://wiki.gentoo.org/wiki/Udev
 * http://wiki.gentoo.org/wiki/Udev/upgrade

 * Messages for package dev-libs/glib-2.42.2:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package dev-perl/Module-Build-0.420.500:

 * This package will overwrite one or more files that may belong to other
 * packages (see list below).
 * 
 * Detected file collision(s):
 * 
 * 	/usr/bin/config_data
 * 
 * Searching all installed packages for file collisions...
 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'dev-perl/Module-Build-0.420.500' merged despite file
 * collisions. If necessary, refer to your elog messages for the whole
 * content of the above message.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/

 * Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:

 * Initializing /tmp/stage1root/lib as a dir
 * Initializing /tmp/stage1root/usr/lib as a dir
 * Initializing /tmp/stage1root/usr/local/lib as a dir
 * Your system profile has SYMLINK_LIB=no, so that means you need to
 * have these paths configured as follows:
 * directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
 * The ebuild will attempt to fix these, but only for trivial conversions.
 * If things fail, you will need to manually create/move the directories.
 * Converting /tmp/stage1root/lib from a symlink to a dir
 * Converting /tmp/stage1root/usr/lib from a symlink to a dir
 * Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc 
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.8.4
>>> Emerging (1 of 80) sys-libs/zlib-1.2.8-r1::gentoo for /tmp/stage1root/
>>> Installing (1 of 80) sys-libs/zlib-1.2.8-r1::gentoo to /tmp/stage1root/
>>> Emerging (2 of 80) sys-libs/ncurses-5.9-r3::gentoo for /tmp/stage1root/
 * The ebuild phase 'compile' has exited unexpectedly. This type of
 * behavior is known to be triggered by things such as failed variable
 * assignments (bug #190128) or bad substitution errors (bug #200313).
 * Normally, before exiting, bash should have displayed an error message
 * above. If bash did not produce an error message above, it's possible
 * that the ebuild has called `exit` when it should have called `die`
 * instead. This behavior may also be triggered by a corrupt bash binary or
 * a hardware problem such as memory or cpu malfunction. If the problem is
 * not reproducible or it appears to occur randomly, then it is likely to
 * be triggered by a hardware problem. If you suspect a hardware problem
 * then you should try some basic hardware diagnostics such as memtest.
 * Please do not report this as a bug unless it is consistently
 * reproducible and you are sure that your bash binary and hardware are
 * functioning properly.
 * The ebuild phase 'die_hooks' has been aborted since PORTAGE_BUILDDIR
 * does not exist: '/var/tmp/portage/sys-libs/ncurses-5.9-r3'

 * Messages for package sys-libs/ncurses-5.9-r3 merged to /tmp/stage1root/:

 * The ebuild phase 'compile' has exited unexpectedly. This type of
 * behavior is known to be triggered by things such as failed variable
 * assignments (bug #190128) or bad substitution errors (bug #200313).
 * Normally, before exiting, bash should have displayed an error message
 * above. If bash did not produce an error message above, it's possible
 * that the ebuild has called `exit` when it should have called `die`
 * instead. This behavior may also be triggered by a corrupt bash binary or
 * a hardware problem such as memory or cpu malfunction. If the problem is
 * not reproducible or it appears to occur randomly, then it is likely to
 * be triggered by a hardware problem. If you suspect a hardware problem
 * then you should try some basic hardware diagnostics such as memtest.
 * Please do not report this as a bug unless it is consistently
 * reproducible and you are sure that your bash binary and hardware are
 * functioning properly.
Traceback (most recent call last):
  File "/usr/lib/python-exec/python2.7/emerge", line 50, in <module>
    retval = emerge_main()
  File "/usr/lib/python2.7/site-packages/_emerge/main.py", line 1154, in emerge_main
    return run_action(emerge_config)
  File "/usr/lib/python2.7/site-packages/_emerge/actions.py", line 3188, in run_action
    emerge_config.args, spinner)
  File "/usr/lib/python2.7/site-packages/_emerge/actions.py", line 495, in action_build
    retval = mergetask.merge()
  File "/usr/lib/python2.7/site-packages/_emerge/Scheduler.py", line 1023, in merge
    rval = self._merge()
  File "/usr/lib/python2.7/site-packages/_emerge/Scheduler.py", line 1412, in _merge
    self._main_loop()
  File "/usr/lib/python2.7/site-packages/_emerge/Scheduler.py", line 1383, in _main_loop
    self._event_loop.iteration()
  File "/usr/lib/python2.7/site-packages/portage/util/_eventloop/EventLoop.py", line 204, in iteration
    if self._run_timeouts():
  File "/usr/lib/python2.7/site-packages/portage/util/_eventloop/EventLoop.py", line 468, in _run_timeouts
    if self._run_idle_callbacks():
  File "/usr/lib/python2.7/site-packages/portage/util/_eventloop/EventLoop.py", line 430, in _run_idle_callbacks
    if not x.callback(*x.args):
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 74, in _async_wait_cb
    self.wait()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 57, in wait
    self._wait_hook()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 175, in _wait_hook
    self._exit_listener_stack.pop()(self)
  File "/usr/lib/python2.7/site-packages/_emerge/EbuildPhase.py", line 345, in _die_hooks_exit
    self.wait()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 57, in wait
    self._wait_hook()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 175, in _wait_hook
    self._exit_listener_stack.pop()(self)
  File "/usr/lib/python2.7/site-packages/_emerge/TaskSequence.py", line 47, in _task_exit_handler
    self.wait()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 57, in wait
    self._wait_hook()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 175, in _wait_hook
    self._exit_listener_stack.pop()(self)
  File "/usr/lib/python2.7/site-packages/_emerge/CompositeTask.py", line 134, in _default_final_exit
    return self.wait()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 57, in wait
    self._wait_hook()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 175, in _wait_hook
    self._exit_listener_stack.pop()(self)
  File "/usr/lib/python2.7/site-packages/_emerge/EbuildBuild.py", line 294, in _build_exit
    self._unlock_builddir()
  File "/usr/lib/python2.7/site-packages/_emerge/EbuildBuild.py", line 290, in _unlock_builddir
    self._build_dir.unlock()
  File "/usr/lib/python2.7/site-packages/_emerge/EbuildBuildDir.py", line 96, in unlock
    catdir_lock.start()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousTask.py", line 30, in start
    self._start()
  File "/usr/lib/python2.7/site-packages/_emerge/AsynchronousLock.py", line 47, in _start
    wantnewlockfile=True, flags=os.O_NONBLOCK)
  File "/usr/lib/python2.7/site-packages/portage/locks.py", line 102, in lockfile
    raise DirectoryNotFound(os.path.dirname(mypath))
DirectoryNotFound: /var/tmp/portage

!!! catalyst: run script failed.


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1244, in run_local
    "run script failed.",env=self.env)
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: Stage build aborting due to error.

Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
    raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/stage1-hppa1.1-20150703/.catalyst_lock'



Full build log at /tmp/catalyst-auto.xO181i/log/hppa1.1_stage1.log