[gentoo-releng-autobuilds] [x86-auto] Catalyst non-fatal build error - installcd-stage1.spec

* /etc/portage/savedconfig/sys-apps/busybox-1.21.0 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
 * Messages for package net-dialup/ppp-2.4.5-r3:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.5-r3/scripts directory.
 * Messages for package app-misc/screen-4.0.3-r6:
 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.
 * Messages for package net-dialup/rp-pppoe-3.8-r2:
 * Use pppoe-setup to configure your dialup connection.
 * Messages for package sys-apps/openrc-0.12.4:
 * In this version of OpenRC, the loopback interface no longer
 * satisfies the net virtual.
 * If you have services now which do not start because of this,
 * They can be fixed by adding rc_need="!net"
 * to the /etc/conf.d/<servicename> file.
 * You should also file a bug against the service asking that
 * need net be dropped from the dependencies.
 * The bug you file should block the following tracker:
 * https://bugs.gentoo.org/show_bug.cgi?id=439092
 * This version of OpenRC doesn't enable nfs mounts automatically any
 * longer. In order to mount nfs file systems, you must use the
 * nfsmount service from the nfs-utils package.
 * See bug https://bugs.gentoo.org/show_bug.cgi?id=427996 for
 * more information on this.
 * You should now update all files in /etc, using etc-update
 * or equivalent before restarting any services or this host.
 * Messages for package sys-fs/fuse-2.9.3:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-apps/dbus-1.6.18-r1:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * To start the D-Bus system-wide messagebus by default
 * you should add it to the default runlevel :
 * `rc-update add dbus default`
 * 
 * Some applications require a session bus in addition to the system
 * bus. Please see `man dbus-launch` for more information.
 * 
 * Messages for package app-accessibility/brltty-4.5-r3:
 * 
 * please be sure /etc/brltty.conf is correct for your system.
 * 
 * To make brltty start on boot, type this command as root:
 * 
 * rc-update add brltty boot
 * Messages for package app-admin/hddtemp-0.3_beta15-r7:
 * In order to update your hddtemp database, run:
 * emerge --config =app-admin/hddtemp-0.3_beta15-r7
 * 
 * If your hard drive is not recognized by hddtemp, please consider
 * submitting your HDD info for inclusion into the Gentoo hddtemp
 * database by filing a bug at https://bugs.gentoo.org/
 * 
 * If hddtemp complains but finds your HDD temperature sensor, use the
 * --quiet option to suppress the warning.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/hddtemp-0.3_beta15-r7/README.gentoo*
 * for future reference)
 * Messages for package net-misc/ntp-4.2.6_p5-r10:
 * You can find an example /etc/ntp.conf in /usr/share/ntp/
 * Review /etc/ntp.conf to setup server info.
 * Review /etc/conf.d/ntpd to setup init.d info.
 * The way ntp sets and maintains your system time has changed.
 * Now you can use /etc/init.d/ntp-client to set your time at
 * boot while you can use /etc/init.d/ntpd to maintain your time
 * while your machine runs
 * Messages for package sys-power/acpid-2.0.20:
 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * http://www.gentoo.org/doc/en/power-management-guide.xml
 * 
 * Messages for package sys-apps/util-linux-2.24.1-r2:
 * The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
 * Messages for package sys-fs/mdadm-3.2.6-r1:
 * If you're not relying on kernel auto-detect of your RAID
 * devices, you need to add 'mdraid' to your 'boot' runlevel:
 * 	rc-update add mdraid boot
 * Messages for package sys-libs/libkudzu-1.2.57.1:
 * QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
 * Messages for package sys-apps/hwsetup-1.2-r2:
 * This package is designed for use on the LiveCD only and will do 
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!
 * This package is intended for usage on the Gentoo release media.  If
 * you are not building a CD, remove this package.  It will not work
 * properly on a running system, as Gentoo does not use any of the
 * Knoppix-style detection except for CD builds.
 * Messages for package sys-fs/e2fsprogs-1.42.7:
 * No /etc/mtab file, creating one temporarily
 * Messages for package sys-fs/ntfs3g-2013.1.13:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package app-misc/livecd-tools-2.0.4:
 * This package is designed for use on the LiveCD only and will do
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!
 * Messages for package app-crypt/gnupg-2.0.22:
 * If you wish to view images emerge:
 * media-gfx/xloadimage, media-gfx/xli or any other viewer
 * Remember to use photo-viewer option in configuration file to activate
 * the right viewer.
 * 
 * Please remember to restart gpg-agent if a different version
 * of the agent is currently used. If you are unsure of the gpg
 * agent you are using please run 'killall gpg-agent',
 * and to start a fresh daemon just run 'gpg-agent --daemon'.
 * Messages for package dev-libs/glib-2.38.2-r1:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * ERROR: dev-libs/glib-2.38.2-r1::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=dev-libs/glib-2.38.2-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-libs/glib-2.38.2-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/dev-libs/glib-2.38.2-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-libs/glib-2.38.2-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/dev-libs/glib-2.38.2-r1/work/glib-2.38.2-.default'
 * S: '/var/tmp/portage/dev-libs/glib-2.38.2-r1/work/glib-2.38.2'













































!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1402, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib64/catalyst//modules/catalyst_support.py", line 539, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1407, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20140603/.catalyst_lock'



Full build log at /release/tmp/run/catalyst-auto.20222/log/installcd-stage1.log