Gentoo Archives: gentoo-releng-autobuilds

From: root <vapier@g.o>
To: releng@g.o, gentoo-releng-autobuilds@l.g.o
Subject: [gentoo-releng-autobuilds] [s390x-auto] Catalyst fatal build error - stage1.spec
Date: Sat, 14 Jan 2017 10:15:16
Message-Id: 20170114101512.67505303F0@nightheron.gentoo.org
1 /var/tmp/catalyst/snapshot_cache/20170114/ (This can take a long time)...
2 Unpacking portage tree (This can take a long time) ...
3 tar: SELinux support is not available
4 lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170114/.catalyst_lock'
5 --- Running action sequence: setup_confdir
6 Configuring /etc/portage...
7 --- Running action sequence: portage_overlay
8 --- Running action sequence: base_dirs
9 --- Running action sequence: bind
10 --- Running action sequence: chroot_setup
11 Setting up chroot...
12
13 Warning!!!!
14 Overriding certain env variables may cause catastrophic failure.
15 If your build fails look here first as the possible problem.
16 Catalyst assumes you know what you are doing when setting
17 these variables.
18 Catalyst Maintainers use VERY minimal envscripts if used at all
19 You have been warned
20
21 --- Running action sequence: setup_environment
22 --- Running action sequence: run_local
23 copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390x-20170114///tmp/stage1root/etc/portage
24 Copying stage1-chroot.sh to /tmp
25 copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390x-20170114//tmp
26 copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390x-20170114//tmp
27 Ensure the file has the executable bit set
28 Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390x-20170114/
29 >>> Regenerating /etc/ld.so.cache...
30 Adding USE=' build' to make.conf for portage build
31 emerge --quiet --oneshot --update --newuse sys-apps/portage
32
33 Performing Global Updates
34 (Could take a couple of minutes if you have a lot of binary packages.)
35
36
37 Updating seed stage...
38 emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
39 >>> Recording sys-devel/gcc in "world" favorites file...
40 emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
41 >>> Verifying ebuild manifests
42 >>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
43 >>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
44 * Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
45 * Initializing /tmp/stage1root/lib as a dir
46 * Initializing /tmp/stage1root/usr/lib as a dir
47 * Initializing /tmp/stage1root/usr/local/lib as a dir
48 * Your system profile has SYMLINK_LIB=no, so that means you need to
49 * have these paths configured as follows:
50 * directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
51 * The ebuild will attempt to fix these, but only for trivial conversions.
52 * If things fail, you will need to manually create/move the directories.
53 * Converting /tmp/stage1root/lib from a symlink to a dir
54 * Converting /tmp/stage1root/usr/lib from a symlink to a dir
55 * Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
56 * You should reboot the system now to get /run mounted with tmpfs!
57
58
59 emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/automake virtual/editor app-arch/gzip sys-apps/which app-arch/tar sys-devel/flex sys-apps/baselayout sys-apps/coreutils app-arch/xz-utils sys-apps/less sys-apps/makedev sys-devel/binutils sys-apps/sed virtual/pkgconfig sys-devel/libtool sys-apps/grep sys-devel/gcc app-shells/bash:0 virtual/os-headers net-misc/rsync sys-apps/findutils sys-devel/patch sys-devel/gnuconfig sys-apps/gawk sys-devel/bison net-misc/wget virtual/package-manager sys-devel/gettext sys-devel/make virtual/libc sys-devel/autoconf virtual/shadow sys-apps/net-tools sys-apps/file app-arch/bzip2 sys-apps/diffutils
60 [ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
61 [ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
62 [ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
63 [ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
64 [ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
65 [ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
66 [ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
67 [ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
68 [ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
69 [ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
70 [ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
71 [ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
72 [ebuild N ] sys-libs/timezone-data-2016h to /tmp/stage1root/
73 [ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
74 [ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
75 [ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
76 [ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
77 [ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
78 [ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
79 [ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
80 [ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
81 [ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
82 [ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
83 [ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
84 [ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
85 [ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
86 [ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
87 [ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
88 [ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
89 [ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
90 [ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
91 [ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
92 [ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
93 [ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
94 [ebuild N ] app-misc/pax-utils-1.1.6 to /tmp/stage1root/
95 [ebuild N ] sys-apps/less-487 to /tmp/stage1root/
96 [ebuild N ] virtual/shadow-0 to /tmp/stage1root/
97 [ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
98 [ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
99 [ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
100 [ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
101 [ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
102 [ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
103 [ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
104 [ebuild N ] sys-devel/flex-2.6.3 to /tmp/stage1root/
105 [ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
106 [ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
107 [ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
108 [ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
109 [ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
110 [ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
111 [ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
112 [ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
113 [ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
114 [ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
115 [ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
116 [ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
117 [ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
118 [ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
119 [ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
120 [ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
121 [ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
122 [ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
123 [ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
124 [ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
125 [ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
126 [ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
127 [ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
128 [ebuild N ] sys-apps/portage-2.3.0 to /tmp/stage1root/
129 [ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
130 [ebuild N ] virtual/editor-0 to /tmp/stage1root/
131 [ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
132 [ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
133 [ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
134 [ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
135 [ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
136 [ebuild N ] virtual/libc-1 to /tmp/stage1root/
137 [ebuild N ] dev-libs/libxml2-2.9.4 to /tmp/stage1root/
138 [ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
139
140 The following keyword changes are necessary to proceed:
141 (see "package.accept_keywords" in the portage(5) man page for more details)
142 # required by sys-apps/portage-2.3.0::gentoo
143 # required by virtual/package-manager-0::gentoo
144 # required by @system
145 # required by @world (argument)
146 =dev-lang/python-exec-2.4.4 ~s390
147 # required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
148 # required by virtual/package-manager-0::gentoo
149 # required by @system
150 # required by @world (argument)
151 =dev-lang/python-2.7.12 ~s390
152 # required by sys-devel/gettext-0.19.7::gentoo
153 # required by sys-devel/gettext (argument)
154 =dev-libs/expat-2.2.0-r1 ~s390
155 # required by dev-lang/python-2.7.12::gentoo
156 # required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
157 # required by virtual/package-manager-0::gentoo
158 # required by @system
159 # required by @world (argument)
160 =app-eselect/eselect-python-20160516 ~s390
161 # required by sys-devel/flex (argument)
162 =sys-devel/flex-2.6.3 ~s390
163 # required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
164 # required by virtual/package-manager-0::gentoo
165 # required by @system
166 # required by @world (argument)
167 =dev-lang/python-3.4.5 ~s390
168
169 Use --autounmask-write to write changes to config files (honoring
170 CONFIG_PROTECT). Carefully examine the list of proposed changes,
171 paying special attention to mask or keyword changes that may expose
172 experimental or unstable packages.
173
174 !!! catalyst: run script failed.
175
176
177 Traceback (most recent call last):
178 File "modules/generic_stage_target.py", line 1244, in run_local
179 "run script failed.",env=self.env)
180 File "/usr/lib64/catalyst/modules/catalyst_support.py", line 541, in cmd
181 raise CatalystError,myexc
182 CatalystError
183 None
184
185 !!! catalyst: Stage build aborting due to error.
186
187 Traceback (most recent call last):
188 File "/usr/lib64/catalyst/catalyst", line 218, in build_target
189 mytarget.run()
190 File "modules/generic_stage_target.py", line 1304, in run
191 apply(getattr(self,x))
192 File "modules/generic_stage_target.py", line 1249, in run_local
193 raise CatalystError,"Stage build aborting due to error."
194 CatalystError
195 !!! catalyst: Error encountered during run of target stage1
196 Catalyst aborting....
197 lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390x-20170114/.catalyst_lock'
198 Command exited with non-zero status 1
199 32.43user 4.17system 0:45.99elapsed 79%CPU (0avgtext+0avgdata 281408maxresident)k
200 0inputs+0outputs (435major+668093minor)pagefaults 0swaps
201
202
203
204 Full build log at /tmp/catalyst-auto.20170114.9Fwugi/log/stage1.log