1 |
* |
2 |
* After enabling or disabling lvmetad in /etc/lvm/lvm.conf you must |
3 |
* run the following to update the init script dependencies: |
4 |
* # rc-update -u |
5 |
* Messages for package app-admin/syslog-ng-3.7.3: |
6 |
* For detailed documentation please see the upstream website: |
7 |
* http://www.balabit.com/sites/default/files/documents/syslog-ng-ose-3.7-guides/en/syslog-ng-ose-v3.7-guide-admin/html/index.html |
8 |
* It is highly recommended that app-admin/logrotate be emerged to |
9 |
* manage the log files. syslog-ng installs a file in /etc/logrotate.d |
10 |
* for logrotate to use. |
11 |
* Messages for package dev-python/lxml-3.6.4-r1: |
12 |
* dev-python/beautifulsoup for Support for BeautifulSoup3 as a parser backend |
13 |
* dev-python/cssselect for Translates CSS selectors to XPath 1.0 expressions |
14 |
* Messages for package app-editors/emacs-24.5-r3: |
15 |
* You can set the version to be started by /usr/bin/emacs through the |
16 |
* Emacs eselect module, which also redirects man and info pages. |
17 |
* Therefore, several Emacs versions can be installed at the same time. |
18 |
* "man emacs.eselect" for details. |
19 |
* |
20 |
* If you upgrade from Emacs version 24.2 or earlier, then it is |
21 |
* strongly recommended that you use app-admin/emacs-updater to rebuild |
22 |
* all byte-compiled elisp files of the installed Emacs packages. |
23 |
* |
24 |
* (Note: Above message is only printed the first time package is |
25 |
* installed. Please look at /usr/share/doc/emacs-24.5-r3/README.gentoo* |
26 |
* for future reference) |
27 |
* Messages for package mail-mta/nullmailer-1.13-r5: |
28 |
* To create an initial setup, please do: |
29 |
* emerge --config =mail-mta/nullmailer-1.13-r5 |
30 |
* Messages for package app-emacs/ebuild-mode-1.31-r1: |
31 |
* Some optional features may require installation of additional |
32 |
* packages, like app-portage/gentoolkit-dev for echangelog. |
33 |
* |
34 |
* (Note: Above message is only printed the first time package is |
35 |
* installed. Please look at /usr/share/doc/ebuild-mode-1.31-r1/README.gentoo* |
36 |
* for future reference) |
37 |
* Messages for package app-emulation/cloud-init-0.7.9: |
38 |
* cloud-init-local needs to be run in the boot runlevel because it |
39 |
* modifies services in the default runlevel. When a runlevel is started |
40 |
* it is cached, so modifications that happen to the current runlevel |
41 |
* while you are in it are not acted upon. |
42 |
* Messages for package app-emulation/xen-tools-4.7.1-r8: |
43 |
* Official Xen Guide and the offical wiki page: |
44 |
* https://wiki.gentoo.org/wiki/Xen |
45 |
* http://wiki.xen.org/wiki/Main_Page |
46 |
* |
47 |
* Recommended to utilise the xencommons script to config sytem At boot |
48 |
* Add by use of rc-update on completion of the install |
49 |
* HVM (VT-x and AMD-V) support has been disabled. If you need hvm |
50 |
* support enable the hvm use flag. |
51 |
* An x86 or amd64 system is required to build HVM support. |
52 |
* The qemu-bridge-helper is renamed to the xen-bridge-helper in the in source |
53 |
* build of qemu. This allows for app-emulation/qemu to be emerged concurrently |
54 |
* with the qemu capable xen. It is up to the user to distinguish between and utilise |
55 |
* the qemu-bridge-helper and the xen-bridge-helper. File bugs of any issues that arise |
56 |
* Messages for package app-misc/mc-4.8.15: |
57 |
* To enable exiting to latest working directory, |
58 |
* put this into your ~/.bashrc: |
59 |
* . /usr/libexec/mc/mc.sh |
60 |
* Messages for package net-dialup/minicom-2.6: |
61 |
* ERROR: net-dialup/minicom-2.6::gentoo failed (configure phase): |
62 |
* econf failed |
63 |
* |
64 |
* Call stack: |
65 |
* ebuild.sh, line 115: Called src_configure |
66 |
* environment, line 2011: Called econf '--sysconfdir=/etc/minicom' '--enable-nls' |
67 |
* phase-helpers.sh, line 665: Called __helpers_die 'econf failed' |
68 |
* isolated-functions.sh, line 117: Called die |
69 |
* The specific snippet of code: |
70 |
* die "$@" |
71 |
* |
72 |
* If you need support, post the output of `emerge --info '=net-dialup/minicom-2.6::gentoo'`, |
73 |
* the complete build log and the output of `emerge -pqv '=net-dialup/minicom-2.6::gentoo'`. |
74 |
* The complete build log is located at '/home/release/tmp/logs/net-dialup:minicom-2.6:20170302-174525.log'. |
75 |
* For convenience, a symlink to the build log is located at '/var/tmp/portage/net-dialup/minicom-2.6/temp/build.log'. |
76 |
* The ebuild environment file is located at '/var/tmp/portage/net-dialup/minicom-2.6/temp/environment'. |
77 |
* Working directory: '/var/tmp/portage/net-dialup/minicom-2.6/work/minicom-2.6' |
78 |
* S: '/var/tmp/portage/net-dialup/minicom-2.6/work/minicom-2.6' |
79 |
|
80 |
|
81 |
|
82 |
|
83 |
|
84 |
|
85 |
|
86 |
|
87 |
|
88 |
|
89 |
|
90 |
|
91 |
|
92 |
|
93 |
|
94 |
|
95 |
|
96 |
|
97 |
|
98 |
|
99 |
|
100 |
|
101 |
|
102 |
|
103 |
|
104 |
|
105 |
|
106 |
|
107 |
|
108 |
|
109 |
|
110 |
|
111 |
|
112 |
|
113 |
|
114 |
|
115 |
|
116 |
|
117 |
|
118 |
|
119 |
|
120 |
|
121 |
|
122 |
|
123 |
|
124 |
|
125 |
|
126 |
|
127 |
|
128 |
|
129 |
|
130 |
|
131 |
|
132 |
|
133 |
|
134 |
|
135 |
|
136 |
|
137 |
|
138 |
|
139 |
|
140 |
|
141 |
|
142 |
|
143 |
|
144 |
|
145 |
|
146 |
|
147 |
|
148 |
|
149 |
|
150 |
|
151 |
|
152 |
|
153 |
|
154 |
|
155 |
|
156 |
|
157 |
|
158 |
|
159 |
|
160 |
|
161 |
|
162 |
|
163 |
|
164 |
|
165 |
|
166 |
|
167 |
|
168 |
|
169 |
|
170 |
|
171 |
|
172 |
|
173 |
|
174 |
|
175 |
|
176 |
|
177 |
|
178 |
|
179 |
02 Mar 2017 17:45:37 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/dpkg', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/tar', 'app-arch/unrar', 'app-arch/unzip', 'app-backup/duplicity', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-crypt/bcwipe', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/hexcurse', 'app-editors/hexedit', 'app-editors/mg', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/cloud-init', 'app-emulation/xen-tools', 'app-misc/colordiff', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', ' |
180 |
app-portage/eix', 'app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-shells/zsh', 'app-text/tree', 'app-text/dos2unix', 'app-text/wgetpaste', 'app-vim/gentoo-syntax', 'dev-lang/perl', 'dev-lang/python', 'dev-vcs/git', 'media-gfx/fbgrab', 'net-analyzer/gnu-netcat', 'net-analyzer/iptraf-ng', 'net-analyzer/netcat6', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-analyzer/traceroute-nanog', 'net-analyzer/tcpdump', 'net-analyzer/nmap', 'net-dialup/mingetty', 'net-dialup/minicom', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-irc/irssi', 'net-misc/curl', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/openssh', 'net-misc/openvpn', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', |
181 |
'net-proxy/dante', 'net-proxy/tsocks', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/grep', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/less', 'sys-apps/man', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmontools', 'sys-apps/usbutils', 'sys-apps/which', 'sys-apps/x86info', 'sys-block/aoetools', 'sys-block/ |
182 |
fio', 'sys-block/mtx', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-boot/grub', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/ext3grep', 'sys-fs/extundelete', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-libs/libsmbios', 'sys-power/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/links', 'app-misc/livecd-tools']) exited 1 |
183 |
02 Mar 2017 17:45:38 UTC: ERROR : CatalystError: livecdbuild aborting due to error. |
184 |
02 Mar 2017 17:45:38 UTC: ERROR : Exception running action sequence build_packages |
185 |
Traceback (most recent call last): |
186 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1512, in build_packages |
187 |
cmd(command, env=self.env) |
188 |
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd |
189 |
print_traceback=False) |
190 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/dpkg', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/tar', 'app-arch/unrar', 'app-arch/unzip', 'app-backup/duplicity', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-crypt/bcwipe', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/hexcurse', 'app-editors/hexedit', 'app-editors/mg', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/cloud-init', 'app-emulation/xen-tools', 'app-misc/colordiff', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', 'app-portage/eix', ' |
191 |
app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-shells/zsh', 'app-text/tree', 'app-text/dos2unix', 'app-text/wgetpaste', 'app-vim/gentoo-syntax', 'dev-lang/perl', 'dev-lang/python', 'dev-vcs/git', 'media-gfx/fbgrab', 'net-analyzer/gnu-netcat', 'net-analyzer/iptraf-ng', 'net-analyzer/netcat6', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-analyzer/traceroute-nanog', 'net-analyzer/tcpdump', 'net-analyzer/nmap', 'net-dialup/mingetty', 'net-dialup/minicom', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-irc/irssi', 'net-misc/curl', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/openssh', 'net-misc/openvpn', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', |
192 |
'net-proxy/tsocks', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/grep', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/less', 'sys-apps/man', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmontools', 'sys-apps/usbutils', 'sys-apps/which', 'sys-apps/x86info', 'sys-block/aoetools', 'sys-block/fio', 'sys-block/mt |
193 |
x', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-boot/grub', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/ext3grep', 'sys-fs/extundelete', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-libs/libsmbios', 'sys-power/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/links', 'app-misc/livecd-tools']) exited 1 |
194 |
|
195 |
During handling of the above exception, another exception occurred: |
196 |
|
197 |
Traceback (most recent call last): |
198 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1416, in run |
199 |
getattr(self, x)() |
200 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1519, in build_packages |
201 |
"build aborting due to error.") |
202 |
catalyst.support.CatalystError: livecdbuild aborting due to error. |
203 |
02 Mar 2017 17:45:38 UTC: NOTICE : Cleaning up... Running unbind() |
204 |
Command exited with non-zero status 2 |
205 |
7804.57user 1172.26system 2:39:04elapsed 94%CPU (0avgtext+0avgdata 818684maxresident)k |
206 |
224944inputs+26192480outputs (630major+807396784minor)pagefaults 0swaps |
207 |
|
208 |
|
209 |
|
210 |
Full build log at /home/release/tmp/run/catalyst-auto.20170301.rkMtDg/log/hardened_admincd-stage1.log |