1 |
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f stage1.spec |
2 |
03 Jan 2019 13:27:52 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf |
3 |
03 Jan 2019 13:27:52 UTC: NOTICE : conf_values[options] = {'snapcache', 'preserve_libs', 'autoresume', 'pkgcache', 'clear-autoresume', 'bindist', 'seedcache'} |
4 |
03 Jan 2019 13:27:52 UTC: NOTICE : Processing spec file: stage1.spec |
5 |
03 Jan 2019 13:27:52 UTC: NOTICE : Using target: stage1 |
6 |
03 Jan 2019 13:27:52 UTC: NOTICE : Source file specification matching setting is: loose |
7 |
03 Jan 2019 13:27:52 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz'] |
8 |
03 Jan 2019 13:27:53 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i486-latest.tar.bz2 |
9 |
03 Jan 2019 13:27:53 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z/tmp/stage1root |
10 |
03 Jan 2019 13:27:53 UTC: NOTICE : Removing AutoResume Points ... |
11 |
03 Jan 2019 13:27:53 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i486-20190103T132725Z |
12 |
03 Jan 2019 13:27:53 UTC: NOTICE : --- Running action sequence: unpack |
13 |
03 Jan 2019 13:27:53 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar... |
14 |
03 Jan 2019 13:27:53 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled |
15 |
03 Jan 2019 13:27:53 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up... |
16 |
03 Jan 2019 13:27:53 UTC: NOTICE : Removing AutoResume Points ... |
17 |
03 Jan 2019 13:27:53 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i486-20190103T132725Z |
18 |
03 Jan 2019 13:27:53 UTC: NOTICE : Clearing the chroot path ... |
19 |
03 Jan 2019 13:27:53 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z |
20 |
03 Jan 2019 13:27:53 UTC: NOTICE : Starting auto from /release/buildroot/x86-dev/builds/default/stage3-i486-latest.tar.bz2 |
21 |
03 Jan 2019 13:27:53 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z (this may take some time) .. |
22 |
lbzip2: stdin: not a valid bzip2 file |
23 |
tar: Child returned status 1 |
24 |
tar: Error is not recoverable: exiting now |
25 |
03 Jan 2019 13:27:53 UTC: ERROR : 'lbzip2' extraction of /release/buildroot/x86-dev/builds/default/stage3-i486-latest.tar.bz2 to /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z failed. |
26 |
03 Jan 2019 13:27:53 UTC: NOTICE : --- Running action sequence: unpack_snapshot |
27 |
03 Jan 2019 13:27:53 UTC: NOTICE : Unpacking portage tree (this can take a long time) ... |
28 |
03 Jan 2019 13:28:01 UTC: NOTICE : --- Running action sequence: setup_confdir |
29 |
03 Jan 2019 13:28:01 UTC: NOTICE : --- Running action sequence: portage_overlay |
30 |
03 Jan 2019 13:28:01 UTC: NOTICE : --- Running action sequence: base_dirs |
31 |
03 Jan 2019 13:28:01 UTC: NOTICE : --- Running action sequence: bind |
32 |
03 Jan 2019 13:28:01 UTC: NOTICE : --- Running action sequence: chroot_setup |
33 |
03 Jan 2019 13:28:01 UTC: NOTICE : Setting up chroot... |
34 |
03 Jan 2019 13:28:01 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
35 |
03 Jan 2019 13:28:01 UTC: WARNING : If your build fails look here first as the possible problem. |
36 |
03 Jan 2019 13:28:01 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
37 |
03 Jan 2019 13:28:01 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
38 |
03 Jan 2019 13:28:01 UTC: WARNING : You have been warned. |
39 |
03 Jan 2019 13:28:01 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z/etc/portage/make.conf |
40 |
03 Jan 2019 13:28:01 UTC: NOTICE : STICKY-CONFIG is enabled |
41 |
03 Jan 2019 13:28:01 UTC: NOTICE : --- Running action sequence: setup_environment |
42 |
03 Jan 2019 13:28:01 UTC: NOTICE : --- Running action sequence: run_local |
43 |
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z/tmp/stage1root/etc/portage |
44 |
Copying stage1-chroot.sh to /tmp |
45 |
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z/tmp |
46 |
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z/tmp |
47 |
Ensure the file has the executable bit set |
48 |
Running stage1-chroot.sh in chroot: |
49 |
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i486-20190103T132725Z /tmp/stage1-chroot.sh |
50 |
chroot: failed to run command './tmp/stage1-chroot.sh': No such file or directory |
51 |
03 Jan 2019 13:28:01 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
52 |
03 Jan 2019 13:28:01 UTC: ERROR : CatalystError: Stage build aborting due to error. |
53 |
03 Jan 2019 13:28:01 UTC: ERROR : Exception running action sequence run_local |
54 |
Traceback (most recent call last): |
55 |
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1355, in run_local |
56 |
env=self.env) |
57 |
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd |
58 |
print_traceback=False) |
59 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
60 |
|
61 |
During handling of the above exception, another exception occurred: |
62 |
|
63 |
Traceback (most recent call last): |
64 |
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run |
65 |
getattr(self, x)() |
66 |
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1364, in run_local |
67 |
print_traceback=False) |
68 |
catalyst.support.CatalystError: Stage build aborting due to error. |
69 |
03 Jan 2019 13:28:01 UTC: NOTICE : Cleaning up... Running unbind() |
70 |
Command exited with non-zero status 2 |
71 |
9.03user 6.10system 0:09.70elapsed 156%CPU (0avgtext+0avgdata 204508maxresident)k |
72 |
377968inputs+1212712outputs (3major+86544minor)pagefaults 0swaps |
73 |
|
74 |
|
75 |
|
76 |
Full build log at /release/tmp/run/catalyst-auto.20190103T132725Z.6ItE9k/log/stage1.log |