1 |
*** Running command: time catalyst -a -c /etc/catalyst/release/amd64-auto.conf -f stage1.spec |
2 |
31 Jan 2018 23:48:09 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf |
3 |
31 Jan 2018 23:48:09 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'clear-autoresume', 'bindist', 'pkgcache'} |
4 |
31 Jan 2018 23:48:09 UTC: NOTICE : Processing spec file: stage1.spec |
5 |
31 Jan 2018 23:48:09 UTC: NOTICE : Using target: stage1 |
6 |
31 Jan 2018 23:48:09 UTC: NOTICE : Source file specification matching setting is: loose |
7 |
31 Jan 2018 23:48:09 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz'] |
8 |
31 Jan 2018 23:48:10 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/default/stage3-amd64-latest.tar.xz |
9 |
31 Jan 2018 23:48:10 UTC: NOTICE : stage1 stage path is /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180131T234742Z/tmp/stage1root |
10 |
31 Jan 2018 23:48:10 UTC: NOTICE : --- Running action sequence: unpack |
11 |
31 Jan 2018 23:48:10 UTC: NOTICE : Clearing the chroot path ... |
12 |
31 Jan 2018 23:48:10 UTC: NOTICE : Emptying directory: /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180131T234742Z |
13 |
31 Jan 2018 23:48:10 UTC: NOTICE : Starting auto from /home/release/buildroot/amd64-dev/builds/default/stage3-amd64-latest.tar.xz |
14 |
31 Jan 2018 23:48:10 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180131T234742Z (this may take some time) .. |
15 |
31 Jan 2018 23:48:14 UTC: NOTICE : --- Running action sequence: unpack_snapshot |
16 |
31 Jan 2018 23:48:14 UTC: NOTICE : Unpacking portage tree (this can take a long time) ... |
17 |
31 Jan 2018 23:48:26 UTC: NOTICE : --- Running action sequence: setup_confdir |
18 |
31 Jan 2018 23:48:26 UTC: NOTICE : --- Running action sequence: portage_overlay |
19 |
31 Jan 2018 23:48:26 UTC: NOTICE : --- Running action sequence: base_dirs |
20 |
31 Jan 2018 23:48:26 UTC: NOTICE : --- Running action sequence: bind |
21 |
31 Jan 2018 23:48:26 UTC: NOTICE : --- Running action sequence: chroot_setup |
22 |
31 Jan 2018 23:48:26 UTC: NOTICE : Setting up chroot... |
23 |
31 Jan 2018 23:48:26 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
24 |
31 Jan 2018 23:48:26 UTC: WARNING : If your build fails look here first as the possible problem. |
25 |
31 Jan 2018 23:48:26 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
26 |
31 Jan 2018 23:48:26 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
27 |
31 Jan 2018 23:48:26 UTC: WARNING : You have been warned. |
28 |
31 Jan 2018 23:48:26 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180131T234742Z/etc/portage/make.conf |
29 |
31 Jan 2018 23:48:26 UTC: NOTICE : STICKY-CONFIG is enabled |
30 |
31 Jan 2018 23:48:26 UTC: NOTICE : --- Running action sequence: setup_environment |
31 |
31 Jan 2018 23:48:26 UTC: NOTICE : --- Running action sequence: run_local |
32 |
copying make.conf to /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180131T234742Z/tmp/stage1root/etc/portage |
33 |
Copying stage1-chroot.sh to /tmp |
34 |
copying stage1-chroot.sh to /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180131T234742Z/tmp |
35 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180131T234742Z/tmp |
36 |
Ensure the file has the executable bit set |
37 |
Running stage1-chroot.sh in chroot: |
38 |
chroot /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180131T234742Z /tmp/stage1-chroot.sh |
39 |
>>> Regenerating /etc/ld.so.cache... |
40 |
Adding USE="${USE} build" to make.conf for portage build |
41 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
42 |
|
43 |
Performing Global Updates |
44 |
(Could take a couple of minutes if you have a lot of binary packages.) |
45 |
|
46 |
|
47 |
>>> Verifying ebuild manifests |
48 |
>>> Emerging (1 of 1) sys-apps/portage-2.3.21::gentoo |
49 |
>>> Installing (1 of 1) sys-apps/portage-2.3.21::gentoo |
50 |
Updating seed stage... |
51 |
emerge --quiet --buildpkg=n --update --deep @world |
52 |
|
53 |
!!! Detected ebuild dependency change(s) without revision bump: |
54 |
|
55 |
sys-apps/util-linux-2.30.2::gentoo |
56 |
|
57 |
HINT: In order to avoid problems involving changed dependencies, use the |
58 |
--changed-deps option to automatically trigger rebuilds when changed |
59 |
dependencies are detected. Refer to the emerge man page for more |
60 |
information about this option. |
61 |
>>> Verifying ebuild manifests |
62 |
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4 |
63 |
>>> Running pre-merge checks for sys-fs/eudev-3.2.5 |
64 |
* |
65 |
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality, |
66 |
* as described in the URL below: |
67 |
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames |
68 |
* |
69 |
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing |
70 |
* between the default or user-modified choice of sys-fs/udev. If you wish to disable |
71 |
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules |
72 |
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules |
73 |
* |
74 |
>>> Emerging (1 of 16) sys-apps/busybox-1.28.0::gentoo |
75 |
>>> Installing (1 of 16) sys-apps/busybox-1.28.0::gentoo |
76 |
>>> Emerging (2 of 16) app-admin/eselect-1.4.11::gentoo |
77 |
>>> Installing (2 of 16) app-admin/eselect-1.4.11::gentoo |
78 |
>>> Emerging (3 of 16) sys-apps/sandbox-2.12::gentoo |
79 |
>>> Installing (3 of 16) sys-apps/sandbox-2.12::gentoo |
80 |
>>> Emerging (4 of 16) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo |
81 |
>>> Installing (4 of 16) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo |
82 |
>>> Emerging (5 of 16) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo |
83 |
>>> Installing (5 of 16) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo |
84 |
>>> Emerging (6 of 16) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo |
85 |
>>> Installing (6 of 16) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo |
86 |
>>> Emerging (7 of 16) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo |
87 |
>>> Installing (7 of 16) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo |
88 |
>>> Emerging (8 of 16) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo |
89 |
>>> Installing (8 of 16) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo |
90 |
>>> Emerging (9 of 16) virtual/dev-manager-0-r1::gentoo |
91 |
>>> Installing (9 of 16) virtual/dev-manager-0-r1::gentoo |
92 |
>>> Emerging (10 of 16) sys-apps/kmod-24::gentoo |
93 |
>>> Installing (10 of 16) sys-apps/kmod-24::gentoo |
94 |
>>> Emerging (11 of 16) sys-apps/kbd-2.0.4::gentoo |
95 |
>>> Installing (11 of 16) sys-apps/kbd-2.0.4::gentoo |
96 |
>>> Emerging (12 of 16) dev-libs/libxml2-2.9.7::gentoo |
97 |
>>> Installing (12 of 16) dev-libs/libxml2-2.9.7::gentoo |
98 |
>>> Emerging (13 of 16) dev-libs/libpipeline-1.4.2::gentoo |
99 |
>>> Installing (13 of 16) dev-libs/libpipeline-1.4.2::gentoo |
100 |
>>> Emerging (14 of 16) net-misc/openssh-7.5_p1-r4::gentoo |
101 |
>>> Installing (14 of 16) net-misc/openssh-7.5_p1-r4::gentoo |
102 |
>>> Emerging (15 of 16) sys-fs/eudev-3.2.5::gentoo |
103 |
>>> Installing (15 of 16) sys-fs/eudev-3.2.5::gentoo |
104 |
>>> Emerging (16 of 16) dev-libs/glib-2.52.3::gentoo |
105 |
>>> Installing (16 of 16) dev-libs/glib-2.52.3::gentoo |
106 |
* Messages for package sys-fs/eudev-3.2.5: |
107 |
* |
108 |
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality, |
109 |
* as described in the URL below: |
110 |
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames |
111 |
* |
112 |
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing |
113 |
* between the default or user-modified choice of sys-fs/udev. If you wish to disable |
114 |
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules |
115 |
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules |
116 |
* |
117 |
* Messages for package sys-apps/busybox-1.28.0: |
118 |
* Could not locate user configfile, so we will save a default one |
119 |
* Your configuration for sys-apps/busybox-1.28.0 has been saved in |
120 |
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure. |
121 |
* You can edit these files by hand and remerge this package with |
122 |
* USE=savedconfig to customise the configuration. |
123 |
* You can rename this file/directory to one of the following for |
124 |
* its configuration to apply to multiple versions: |
125 |
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ |
126 |
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] |
127 |
* Messages for package sys-fs/eudev-3.2.5: |
128 |
* Unable to find kernel sources at /usr/src/linux |
129 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
130 |
* |
131 |
* You need to restart eudev as soon as possible to make the |
132 |
* upgrade go into effect: |
133 |
* /etc/init.d/udev --nodeps restart |
134 |
* |
135 |
* For more information on eudev on Gentoo, writing udev rules, and |
136 |
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev |
137 |
* Messages for package dev-libs/glib-2.52.3: |
138 |
* Unable to find kernel sources at /usr/src/linux |
139 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
140 |
|
141 |
|
142 |
|
143 |
|
144 |
|
145 |
|
146 |
|
147 |
|
148 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
149 |
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/ |
150 |
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/ |
151 |
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/: |
152 |
* Initializing /tmp/stage1root/lib as a symlink |
153 |
* Initializing /tmp/stage1root/usr/lib as a symlink |
154 |
* Initializing /tmp/stage1root/usr/local/lib as a symlink |
155 |
* You should reboot now to get /run mounted with tmpfs! |
156 |
|
157 |
|
158 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/autoconf sys-apps/file sys-apps/net-tools sys-devel/gnuconfig sys-apps/gawk net-misc/rsync net-misc/wget sys-apps/less sys-devel/bison sys-apps/which sys-apps/makedev sys-apps/grep sys-devel/gettext sys-apps/diffutils virtual/shadow app-arch/gzip sys-devel/automake virtual/os-headers sys-apps/baselayout sys-devel/libtool app-shells/bash:0 sys-apps/sed virtual/libc virtual/pkgconfig virtual/package-manager app-arch/bzip2 app-arch/xz-utils sys-devel/gcc sys-devel/flex virtual/editor sys-apps/coreutils sys-apps/findutils sys-devel/make sys-devel/patch app-arch/tar sys-devel/binutils |
159 |
|
160 |
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements. |
161 |
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" ABI_X86="(64)" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)" |
162 |
|
163 |
The following REQUIRED_USE flag constraints are unsatisfied: |
164 |
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) |
165 |
|
166 |
The above constraints are a subset of the following complete expression: |
167 |
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 ) |
168 |
|
169 |
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild]) |
170 |
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary]) |
171 |
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary]) |
172 |
(dependency required by "sys-devel/automake-1.15.1-r1::gentoo" [binary]) |
173 |
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary]) |
174 |
(dependency required by "sys-devel/libtool" [argument]) |
175 |
31 Jan 2018 23:55:44 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
176 |
31 Jan 2018 23:55:44 UTC: ERROR : CatalystError: Stage build aborting due to error. |
177 |
31 Jan 2018 23:55:44 UTC: ERROR : Exception running action sequence run_local |
178 |
Traceback (most recent call last): |
179 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local |
180 |
env=self.env) |
181 |
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd |
182 |
print_traceback=False) |
183 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
184 |
|
185 |
During handling of the above exception, another exception occurred: |
186 |
|
187 |
Traceback (most recent call last): |
188 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run |
189 |
getattr(self, x)() |
190 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local |
191 |
print_traceback=False) |
192 |
catalyst.support.CatalystError: Stage build aborting due to error. |
193 |
31 Jan 2018 23:55:44 UTC: NOTICE : Cleaning up... Running unbind() |
194 |
Command exited with non-zero status 2 |
195 |
439.62user 86.11system 7:35.45elapsed 115%CPU (0avgtext+0avgdata 352916maxresident)k |
196 |
18784inputs+4802136outputs (0major+60051139minor)pagefaults 0swaps |
197 |
|
198 |
|
199 |
|
200 |
Full build log at /home/release/tmp/run/catalyst-auto.20180131T234742Z.jddwWd/log/stage1.log |