1 |
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f hardened/stage3.spec |
2 |
11 Apr 2018 06:32:48 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf |
3 |
11 Apr 2018 06:32:48 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'bindist', 'pkgcache', 'clear-autoresume'} |
4 |
11 Apr 2018 06:32:48 UTC: NOTICE : Processing spec file: hardened/stage3.spec |
5 |
11 Apr 2018 06:32:48 UTC: NOTICE : Using target: stage3 |
6 |
11 Apr 2018 06:32:48 UTC: NOTICE : Source file specification matching setting is: loose |
7 |
11 Apr 2018 06:32:48 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz'] |
8 |
11 Apr 2018 06:32:48 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20180411T030004Z.tar.xz |
9 |
11 Apr 2018 06:32:48 UTC: NOTICE : --- Running action sequence: unpack |
10 |
11 Apr 2018 06:32:48 UTC: NOTICE : Clearing the chroot path ... |
11 |
11 Apr 2018 06:32:48 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z |
12 |
11 Apr 2018 06:32:48 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20180411T030004Z.tar.xz |
13 |
11 Apr 2018 06:32:48 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z (this may take some time) .. |
14 |
11 Apr 2018 06:32:49 UTC: NOTICE : --- Running action sequence: unpack_snapshot |
15 |
11 Apr 2018 06:32:49 UTC: NOTICE : Unpacking portage tree (this can take a long time) ... |
16 |
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: setup_confdir |
17 |
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: portage_overlay |
18 |
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: base_dirs |
19 |
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: bind |
20 |
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: chroot_setup |
21 |
11 Apr 2018 06:33:05 UTC: NOTICE : Setting up chroot... |
22 |
11 Apr 2018 06:33:05 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
23 |
11 Apr 2018 06:33:05 UTC: WARNING : If your build fails look here first as the possible problem. |
24 |
11 Apr 2018 06:33:05 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
25 |
11 Apr 2018 06:33:05 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
26 |
11 Apr 2018 06:33:05 UTC: WARNING : You have been warned. |
27 |
11 Apr 2018 06:33:05 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z/etc/portage/make.conf |
28 |
11 Apr 2018 06:33:05 UTC: NOTICE : STICKY-CONFIG is enabled |
29 |
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: setup_environment |
30 |
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: run_local |
31 |
Copying stage3-chroot.sh to /tmp |
32 |
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z/tmp |
33 |
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z/tmp |
34 |
Ensure the file has the executable bit set |
35 |
Running stage3-chroot.sh in chroot: |
36 |
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z /tmp/stage3-chroot.sh |
37 |
>>> Regenerating /etc/ld.so.cache... |
38 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage |
39 |
>>> Emerging binary (1 of 2) dev-python/pyblake2-1.1.0::gentoo |
40 |
>>> Installing (1 of 2) dev-python/pyblake2-1.1.0::gentoo |
41 |
>>> Emerging binary (2 of 2) sys-apps/portage-2.3.24-r1::gentoo |
42 |
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo |
43 |
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system |
44 |
|
45 |
|
46 |
[nomerge ] sys-apps/elfix-0.9.2::gentoo USE="ptpax xtpax" |
47 |
[nomerge ] dev-python/pypax-0.9.2::gentoo USE="ptpax xtpax" PYTHON_TARGETS="python2_7 python3_5 (-pypy) -python3_4 -python3_6" |
48 |
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" |
49 |
[binary N ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB |
50 |
[ebuild N ] dev-python/six-1.11.0::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB |
51 |
[binary N ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB |
52 |
|
53 |
Total: 3 packages (3 new, 2 binaries), Size of downloads: 0 KiB |
54 |
|
55 |
* Error: circular dependencies: |
56 |
|
57 |
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) depends on |
58 |
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (runtime) |
59 |
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) (buildtime) |
60 |
|
61 |
* Note that circular dependencies can often be avoided by temporarily |
62 |
* disabling USE flags that trigger optional dependencies. |
63 |
11 Apr 2018 06:33:46 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1 |
64 |
11 Apr 2018 06:33:46 UTC: ERROR : CatalystError: Stage build aborting due to error. |
65 |
11 Apr 2018 06:33:46 UTC: ERROR : Exception running action sequence run_local |
66 |
Traceback (most recent call last): |
67 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local |
68 |
env=self.env) |
69 |
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd |
70 |
print_traceback=False) |
71 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1 |
72 |
|
73 |
During handling of the above exception, another exception occurred: |
74 |
|
75 |
Traceback (most recent call last): |
76 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run |
77 |
getattr(self, x)() |
78 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local |
79 |
print_traceback=False) |
80 |
catalyst.support.CatalystError: Stage build aborting due to error. |
81 |
11 Apr 2018 06:33:46 UTC: NOTICE : Cleaning up... Running unbind() |
82 |
Command exited with non-zero status 2 |
83 |
30.18user 3.94system 0:58.73elapsed 58%CPU (0avgtext+0avgdata 322176maxresident)k |
84 |
16inputs+2177424outputs (0major+490668minor)pagefaults 0swaps |
85 |
|
86 |
|
87 |
|
88 |
Full build log at /home/release/tmp/run/catalyst-auto.20180411T030004Z.Rp7uVw/log/hardened_stage3.log |