1 |
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390x-20180414T091247Z/ |
2 |
|
3 |
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390x-latest.tar.bz2 |
4 |
to /var/tmp/catalyst/tmp/default/stage1-s390x-20180414T091247Z/ (This may take some time) ... |
5 |
|
6 |
tar: SELinux support is not available |
7 |
--- Running action sequence: unpack_snapshot |
8 |
Cleaning up invalid snapshot cache at |
9 |
/var/tmp/catalyst/snapshot_cache/20180414T091247Z/ (This can take a long time)... |
10 |
Unpacking portage tree (This can take a long time) ... |
11 |
tar: SELinux support is not available |
12 |
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180414T091247Z/.catalyst_lock' |
13 |
--- Running action sequence: setup_confdir |
14 |
Configuring /etc/portage... |
15 |
--- Running action sequence: portage_overlay |
16 |
--- Running action sequence: base_dirs |
17 |
--- Running action sequence: bind |
18 |
--- Running action sequence: chroot_setup |
19 |
Setting up chroot... |
20 |
|
21 |
Warning!!!! |
22 |
Overriding certain env variables may cause catastrophic failure. |
23 |
If your build fails look here first as the possible problem. |
24 |
Catalyst assumes you know what you are doing when setting |
25 |
these variables. |
26 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
27 |
You have been warned |
28 |
|
29 |
--- Running action sequence: setup_environment |
30 |
--- Running action sequence: run_local |
31 |
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390x-20180414T091247Z///tmp/stage1root/etc/portage |
32 |
Copying stage1-chroot.sh to /tmp |
33 |
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390x-20180414T091247Z//tmp |
34 |
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390x-20180414T091247Z//tmp |
35 |
Ensure the file has the executable bit set |
36 |
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390x-20180414T091247Z/ |
37 |
>>> Regenerating /etc/ld.so.cache... |
38 |
Adding USE=" build" to make.conf for portage build |
39 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
40 |
|
41 |
Performing Global Updates |
42 |
(Could take a couple of minutes if you have a lot of binary packages.) |
43 |
|
44 |
|
45 |
>>> Verifying ebuild manifests |
46 |
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo |
47 |
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo |
48 |
Updating seed stage... |
49 |
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc |
50 |
>>> Recording sys-devel/gcc in "world" favorites file... |
51 |
>>> Verifying ebuild manifests |
52 |
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo |
53 |
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo |
54 |
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo |
55 |
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo |
56 |
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo |
57 |
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo |
58 |
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo |
59 |
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo |
60 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
61 |
>>> Verifying ebuild manifests |
62 |
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/ |
63 |
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/ |
64 |
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/: |
65 |
* Initializing /tmp/stage1root/lib as a dir |
66 |
* Initializing /tmp/stage1root/usr/lib as a dir |
67 |
* Initializing /tmp/stage1root/usr/local/lib as a dir |
68 |
* You should reboot now to get /run mounted with tmpfs! |
69 |
|
70 |
|
71 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/automake sys-apps/coreutils app-shells/bash:0 sys-devel/libtool sys-apps/findutils net-misc/rsync sys-apps/portage app-arch/gzip app-arch/tar virtual/pkgconfig sys-devel/flex sys-devel/make virtual/libc sys-apps/which sys-devel/autoconf sys-devel/gnuconfig net-misc/wget virtual/os-headers sys-devel/gettext sys-apps/file sys-devel/binutils sys-apps/less app-arch/bzip2 sys-apps/sed sys-devel/gcc virtual/editor sys-apps/baselayout sys-devel/patch sys-devel/bison sys-apps/net-tools sys-apps/diffutils sys-apps/makedev sys-apps/gawk app-arch/xz-utils virtual/shadow sys-apps/grep |
72 |
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/ |
73 |
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/ |
74 |
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/ |
75 |
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/ |
76 |
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/ |
77 |
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/ |
78 |
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/ |
79 |
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/ |
80 |
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/ |
81 |
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/ |
82 |
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/ |
83 |
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/ |
84 |
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/ |
85 |
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/ |
86 |
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/ |
87 |
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/ |
88 |
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/ |
89 |
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/ |
90 |
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/ |
91 |
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/ |
92 |
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/ |
93 |
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/ |
94 |
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/ |
95 |
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/ |
96 |
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/ |
97 |
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/ |
98 |
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/ |
99 |
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/ |
100 |
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/ |
101 |
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/ |
102 |
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/ |
103 |
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/ |
104 |
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/ |
105 |
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/ |
106 |
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/ |
107 |
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/ |
108 |
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/ |
109 |
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/ |
110 |
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/ |
111 |
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/ |
112 |
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/ |
113 |
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/ |
114 |
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/ |
115 |
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/ |
116 |
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/ |
117 |
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/ |
118 |
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/ |
119 |
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/ |
120 |
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/ |
121 |
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/ |
122 |
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/ |
123 |
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/ |
124 |
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/ |
125 |
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/ |
126 |
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/ |
127 |
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/ |
128 |
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/ |
129 |
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/ |
130 |
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/ |
131 |
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/ |
132 |
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/ |
133 |
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/ |
134 |
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/ |
135 |
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/ |
136 |
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/ |
137 |
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/ |
138 |
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/ |
139 |
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/ |
140 |
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/ |
141 |
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/ |
142 |
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/ |
143 |
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/ |
144 |
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/ |
145 |
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/ |
146 |
[ebuild N ] virtual/libc-1 to /tmp/stage1root/ |
147 |
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/ |
148 |
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/ |
149 |
[ebuild N ] virtual/editor-0 to /tmp/stage1root/ |
150 |
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/ |
151 |
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/ |
152 |
|
153 |
The following keyword changes are necessary to proceed: |
154 |
(see "package.accept_keywords" in the portage(5) man page for more details) |
155 |
# required by sys-apps/portage-2.3.8::gentoo |
156 |
# required by app-admin/perl-cleaner-2.25::gentoo |
157 |
# required by dev-lang/perl-5.24.3::gentoo |
158 |
# required by virtual/perl-File-Path-2.130.0::gentoo |
159 |
=app-misc/pax-utils-1.2.3-r1 ~s390 |
160 |
# required by sys-apps/portage-2.3.8::gentoo |
161 |
# required by app-admin/perl-cleaner-2.25::gentoo |
162 |
# required by dev-lang/perl-5.24.3::gentoo |
163 |
# required by virtual/perl-File-Path-2.130.0::gentoo |
164 |
=sys-apps/sandbox-2.13 ~s390 |
165 |
# required by virtual/shadow-0::gentoo |
166 |
# required by virtual/shadow (argument) |
167 |
=sys-apps/shadow-4.5-r1 ~s390 |
168 |
|
169 |
Use --autounmask-write to write changes to config files (honoring |
170 |
CONFIG_PROTECT). Carefully examine the list of proposed changes, |
171 |
paying special attention to mask or keyword changes that may expose |
172 |
experimental or unstable packages. |
173 |
|
174 |
!!! catalyst: run script failed. |
175 |
|
176 |
|
177 |
Traceback (most recent call last): |
178 |
File "modules/generic_stage_target.py", line 1244, in run_local |
179 |
"run script failed.",env=self.env) |
180 |
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 541, in cmd |
181 |
raise CatalystError,myexc |
182 |
CatalystError |
183 |
None |
184 |
|
185 |
!!! catalyst: Stage build aborting due to error. |
186 |
|
187 |
Traceback (most recent call last): |
188 |
File "/usr/lib64/catalyst/catalyst", line 218, in build_target |
189 |
mytarget.run() |
190 |
File "modules/generic_stage_target.py", line 1304, in run |
191 |
apply(getattr(self,x)) |
192 |
File "modules/generic_stage_target.py", line 1249, in run_local |
193 |
raise CatalystError,"Stage build aborting due to error." |
194 |
CatalystError |
195 |
!!! catalyst: Error encountered during run of target stage1 |
196 |
Catalyst aborting.... |
197 |
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390x-20180414T091247Z/.catalyst_lock' |
198 |
Command exited with non-zero status 1 |
199 |
78.69user 22.55system 1:51.49elapsed 90%CPU (0avgtext+0avgdata 323552maxresident)k |
200 |
0inputs+0outputs (816major+7577527minor)pagefaults 0swaps |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /tmp/catalyst-auto.20180414T091247Z.NfrPX3/log/stage1.log |