1 |
Setting up chroot... |
2 |
|
3 |
Warning!!!! |
4 |
Overriding certain env variables may cause catastrophic failure. |
5 |
If your build fails look here first as the possible problem. |
6 |
Catalyst assumes you know what you are doing when setting |
7 |
these variables. |
8 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
9 |
You have been warned |
10 |
|
11 |
--- Running action sequence: setup_environment |
12 |
--- Running action sequence: run_local |
13 |
copying make.conf to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20170928///tmp/stage1root/etc/portage |
14 |
Copying stage1-chroot.sh to /tmp |
15 |
copying stage1-chroot.sh to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20170928//tmp |
16 |
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20170928//tmp |
17 |
Ensure the file has the executable bit set |
18 |
Running stage1-chroot.sh in chroot /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20170928/ |
19 |
>>> Regenerating /etc/ld.so.cache... |
20 |
Adding USE=" build" to make.conf for portage build |
21 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
22 |
|
23 |
Performing Global Updates |
24 |
(Could take a couple of minutes if you have a lot of binary packages.) |
25 |
|
26 |
|
27 |
>>> Verifying ebuild manifests |
28 |
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo |
29 |
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo |
30 |
Updating seed stage... |
31 |
emerge --quiet --buildpkg=n --update --deep @world |
32 |
>>> Verifying ebuild manifests |
33 |
>>> Emerging (1 of 8) sys-apps/net-tools-1.60_p20161110235919::gentoo |
34 |
>>> Installing (1 of 8) sys-apps/net-tools-1.60_p20161110235919::gentoo |
35 |
>>> Emerging (2 of 8) sys-apps/file-5.32::gentoo |
36 |
>>> Installing (2 of 8) sys-apps/file-5.32::gentoo |
37 |
>>> Emerging (3 of 8) virtual/perl-Test-Harness-3.360.100_rc-r2::gentoo |
38 |
>>> Installing (3 of 8) virtual/perl-Test-Harness-3.360.100_rc-r2::gentoo |
39 |
>>> Emerging (4 of 8) virtual/perl-File-Spec-3.630.100_rc-r2::gentoo |
40 |
>>> Installing (4 of 8) virtual/perl-File-Spec-3.630.100_rc-r2::gentoo |
41 |
>>> Emerging (5 of 8) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2::gentoo |
42 |
>>> Installing (5 of 8) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2::gentoo |
43 |
>>> Emerging (6 of 8) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r2::gentoo |
44 |
>>> Installing (6 of 8) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r2::gentoo |
45 |
>>> Emerging (7 of 8) virtual/perl-JSON-PP-2.273.0.100_rc-r4::gentoo |
46 |
>>> Installing (7 of 8) virtual/perl-JSON-PP-2.273.0.100_rc-r4::gentoo |
47 |
>>> Emerging (8 of 8) sys-apps/help2man-1.47.4::gentoo |
48 |
>>> Installing (8 of 8) sys-apps/help2man-1.47.4::gentoo |
49 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
50 |
>>> Verifying ebuild manifests |
51 |
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/ |
52 |
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/ |
53 |
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/: |
54 |
* Initializing /tmp/stage1root/lib as a symlink |
55 |
* Initializing /tmp/stage1root/usr/lib as a symlink |
56 |
* Initializing /tmp/stage1root/usr/local/lib as a symlink |
57 |
* You should reboot the system now to get /run mounted with tmpfs! |
58 |
|
59 |
|
60 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gettext sys-devel/autoconf sys-apps/makedev net-misc/rsync sys-devel/flex sys-devel/bison >=sys-apps/findutils-4.4 virtual/editor sys-devel/automake sys-devel/make sys-apps/sed sys-apps/gawk sys-apps/less sys-apps/file sys-devel/binutils virtual/package-manager sys-apps/grep sys-apps/net-tools sys-apps/which virtual/pkgconfig >=sys-apps/baselayout-2 app-arch/xz-utils virtual/libc net-misc/wget sys-devel/libtool app-arch/bzip2 >=sys-devel/patch-2.7 virtual/os-headers app-arch/gzip virtual/shadow sys-devel/gnuconfig sys-apps/coreutils sys-apps/diffutils app-shells/bash:0 app-arch/tar sys-devel/gcc |
61 |
[ebuild rR ] app-arch/bzip2-1.0.6-r8 [1.0.6-r8] |
62 |
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/ |
63 |
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/ |
64 |
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/ |
65 |
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/ |
66 |
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/ |
67 |
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/ |
68 |
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/ |
69 |
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/ |
70 |
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/ |
71 |
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/ |
72 |
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/ |
73 |
[ebuild N ] sys-apps/install-xattr-0.5 to /tmp/stage1root/ |
74 |
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/ |
75 |
[ebuild N ] sys-devel/make-4.2.1 to /tmp/stage1root/ |
76 |
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/ |
77 |
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/ |
78 |
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/ |
79 |
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/ |
80 |
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/ |
81 |
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/ |
82 |
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/ |
83 |
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/ |
84 |
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/ |
85 |
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/ |
86 |
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/ |
87 |
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/ |
88 |
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/ |
89 |
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/ |
90 |
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/ |
91 |
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/ |
92 |
[ebuild rR ] sys-libs/zlib-1.2.11 [1.2.11] |
93 |
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/ |
94 |
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/ |
95 |
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/ |
96 |
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/ |
97 |
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/ |
98 |
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/ |
99 |
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/ |
100 |
[ebuild N ] sys-apps/shadow-4.5 to /tmp/stage1root/ |
101 |
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/ |
102 |
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/ |
103 |
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/ |
104 |
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/ |
105 |
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/ |
106 |
[ebuild N ] sys-devel/binutils-2.28.1 to /tmp/stage1root/ |
107 |
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/ |
108 |
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/ |
109 |
[ebuild N ] dev-libs/mpc-1.0.2-r1 to /tmp/stage1root/ |
110 |
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/ |
111 |
[ebuild N ] sys-apps/attr-2.4.47-r2 to /tmp/stage1root/ |
112 |
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/ |
113 |
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/ |
114 |
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/ |
115 |
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/ |
116 |
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/ |
117 |
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/ |
118 |
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/ |
119 |
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/ |
120 |
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/ |
121 |
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r2 to /tmp/stage1root/ |
122 |
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/ |
123 |
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/ |
124 |
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/ |
125 |
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/ |
126 |
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/ |
127 |
[ebuild N ] sys-devel/automake-1.15-r2 to /tmp/stage1root/ |
128 |
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/ |
129 |
[ebuild N ] sys-libs/glibc-2.23-r4 to /tmp/stage1root/ |
130 |
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/ |
131 |
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/ |
132 |
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/ |
133 |
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/ |
134 |
[ebuild N ] app-editors/nano-2.7.5 to /tmp/stage1root/ |
135 |
[ebuild N ] dev-python/pyxattr-0.5.5 to /tmp/stage1root/ |
136 |
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/ |
137 |
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/ |
138 |
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/ |
139 |
[ebuild N ] virtual/editor-0 to /tmp/stage1root/ |
140 |
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ |
141 |
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/ |
142 |
[ebuild N ] virtual/libc-1 to /tmp/stage1root/ |
143 |
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/ |
144 |
[ebuild N ] sys-devel/gcc-5.4.0-r3 to /tmp/stage1root/ |
145 |
[ebuild N ] dev-libs/libxml2-2.9.4-r3 to /tmp/stage1root/ |
146 |
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/ |
147 |
|
148 |
!!! Multiple package instances within a single package slot have been pulled |
149 |
!!! into the dependency graph, resulting in a slot conflict: |
150 |
|
151 |
sys-libs/zlib:0 |
152 |
|
153 |
(sys-libs/zlib-1.2.11:0/1::gentoo, ebuild scheduled for merge) pulled in by |
154 |
(no parents that aren't satisfied by other packages in this slot) |
155 |
|
156 |
(sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by |
157 |
>=sys-libs/zlib-1.2.8-r1:0/0=[abi_x86_64(-)] required by (dev-libs/libxml2-2.9.4-r3:2/2::gentoo, installed) |
158 |
^^^^^ |
159 |
(and 3 more with the same problem) |
160 |
|
161 |
app-arch/bzip2:0 |
162 |
|
163 |
(app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) pulled in by |
164 |
(no parents that aren't satisfied by other packages in this slot) |
165 |
|
166 |
(app-arch/bzip2-1.0.6-r8:0/0::gentoo, installed) pulled in by |
167 |
app-arch/bzip2:0/0= required by (dev-lang/python-2.7.12:2.7/2.7::gentoo, installed) |
168 |
^^^^^ |
169 |
(and 1 more with the same problem) |
170 |
|
171 |
NOTE: Use the '--verbose-conflicts' option to display parents omitted above |
172 |
|
173 |
|
174 |
!!! catalyst: run script failed. |
175 |
|
176 |
|
177 |
Traceback (most recent call last): |
178 |
File "modules/generic_stage_target.py", line 1253, in run_local |
179 |
"run script failed.",env=self.env) |
180 |
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd |
181 |
raise CatalystError,myexc |
182 |
CatalystError |
183 |
None |
184 |
|
185 |
!!! catalyst: Stage build aborting due to error. |
186 |
|
187 |
Traceback (most recent call last): |
188 |
File "/usr/lib64/catalyst/catalyst", line 218, in build_target |
189 |
mytarget.run() |
190 |
File "modules/generic_stage_target.py", line 1333, in run |
191 |
apply(getattr(self,x)) |
192 |
File "modules/generic_stage_target.py", line 1258, in run_local |
193 |
raise CatalystError,"Stage build aborting due to error." |
194 |
CatalystError |
195 |
!!! catalyst: Error encountered during run of target stage1 |
196 |
Catalyst aborting.... |
197 |
lockfile does not exist '/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20170928/.catalyst_lock' |
198 |
Command exited with non-zero status 1 |
199 |
140.92user 43.21system 2:51.92elapsed 107%CPU (0avgtext+0avgdata 811904maxresident)k |
200 |
198272inputs+2116752outputs (0major+8038938minor)pagefaults 0swaps |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /release/tmp/run/catalyst-auto.20170928.r9Ro52/log/hardened_stage1-nomultilib.log |