[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - hardened/admincd-stage2.spec

07 Mar 2017 10:32:30 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
07 Mar 2017 10:32:30 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
07 Mar 2017 10:32:30 UTC: WARNING : You have been warned.
07 Mar 2017 10:32:30 UTC: NOTICE  : --- Running action sequence: setup_environment
07 Mar 2017 10:32:30 UTC: NOTICE  : --- Running action sequence: run_local
07 Mar 2017 10:32:30 UTC: NOTICE  : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20170306/tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20170306/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
    chroot /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20170306 /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.4.52.4-r2
>>> Emerging (1 of 1) sys-kernel/genkernel-3.4.52.4-r2::gentoo
>>> Installing (1 of 1) sys-kernel/genkernel-3.4.52.4-r2::gentoo
 * Messages for package sys-kernel/genkernel-3.4.52.4-r2:
 * Documentation is available in the genkernel manual page
 * as well as the following URL:
 * https://www.gentoo.org/doc/en/genkernel.xml
 * This package is known to not work with reiser4.  If you are running
 * reiser4 and have a problem, do not file a bug.  We know it does not
 * work and we don't plan on fixing it since reiser4 is the one that is
 * broken in this regard.  Try using a sane filesystem like ext4.
 * The LUKS support has changed from versions prior to 3.4.4.  Now,
 * you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.


removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20170306/tmp/pre-kmerge.sh from the chroot
removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20170306/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20170306/tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20170306/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
    chroot /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20170306 /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.52.4 found ... OK
emerge --quiet --usepkg --buildpkg --newuse hardened-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r1::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r1::gentoo
>>> Emerging (2 of 2) sys-kernel/hardened-sources-4.8.17-r2::gentoo
>>> Installing (2 of 2) sys-kernel/hardened-sources-4.8.17-r2::gentoo
>>> Recording sys-kernel/hardened-sources in "world" favorites file...
 * Messages for package sys-kernel/hardened-sources-4.8.17-r2:
 * If you are upgrading from a previous kernel, you may be interested
 * in the following document:
 *   - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
 * 
 * Users of grsecurity's RBAC system must ensure they are using
 * sys-apps/gradm-3.1*, which is compatible with hardened-sources-4.8.17-r2.
 * It is strongly recommended that the following command is issued
 * prior to booting a hardened-sources-4.8.17-r2 kernel for the first time:
 * 
 * emerge -na =sys-apps/gradm-3.1*
 * 


Adjusting /usr/src/linux to point to /usr/src/linux-4.8.17-hardened-r2
* CMD_LOGLEVEL: 5
* CACHE_DIR: /tmp/kerncache/gentoo-genkernel_cache-20170306
* CMD_MOUNTBOOT: 0
* CMD_KERNEL_DIR: /usr/src/linux
* MODULESPACKAGE: /tmp/kerncache/gentoo-modules-20170306.tar.bz2
* MINKERNPACKAGE: /tmp/kerncache/gentoo-kernel-initrd-20170306.tar.bz2
* CMD_KERNEL_CONFIG: /var/tmp/gentoo.config
* Gentoo Linux Genkernel; Version 3.4.52.4
* Running with options: --callback=emerge -qN app-accessibility/espeakup media-libs/alsa-oss media-sound/alsa-utils net-dialup/globespan-adsl sys-apps/pcmciautils sys-kernel/linux-firmware --lvm --dmraid --mdadm --makeopts=-j8 --loglevel=5 --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20170306 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20170306.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20170306.tar.bz2 all --kernel-config=/var/tmp/gentoo.config

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* Resolving config file, command line, and arch default settings.
*   LOGFILE set in config file to "/var/log/genkernel.log".
*   KERNEL_DIR set on command line to "/usr/src/linux".
*   KERNEL_SOURCES defaulted to "yes".
*   KNAME defaulted to "genkernel".
*   COMPRESS_INITRD defaulted to "yes".
*   COMPRESS_INITRD_TYPE defaulted to "best".
*   MAKEOPTS overridden on command line to "-j8".
*   KERNEL_MAKE defaulted to "make".
*   UTILS_MAKE defaulted to "make".
*   KERNEL_CC defaulted to "gcc".
*   KERNEL_LD defaulted to "ld".
*   KERNEL_AS defaulted to "as".
*   UTILS_CC defaulted to "gcc".
*   UTILS_LD defaulted to "ld".
*   UTILS_AS defaulted to "as".
*   KERNEL_CROSS_COMPILE not set.
*   UTILS_CROSS_COMPILE not set.
*   BOOTDIR defaulted to "/boot".
*   KERNEL_OUTPUTDIR defaulted to "/usr/src/linux".
*   MODPROBEDIR defaulted to "/etc/modprobe.d".
*   SPLASH not set.
*   POSTCLEAR not set.
*   MRPROPER set in config file to "yes".
*   MENUCONFIG set in config file to "no".
*   CLEAN set in config file to "yes".
*   MINKERNPACKAGE set on command line to "/tmp/kerncache/gentoo-kernel-initrd-20170306.tar.bz2".
*   MODULESPACKAGE set on command line to "/tmp/kerncache/gentoo-modules-20170306.tar.bz2".
*   KERNCACHE not set.
*   RAMDISKMODULES defaulted to "yes".
*   ALLRAMDISKMODULES not set.
*   INITRAMFS_OVERLAY not set.
*   MOUNTBOOT overridden on command line to "0".
*   BUILD_STATIC not set.
*   SAVE_CONFIG set in config file to "yes".
*   SYMLINK not set.
*   INSTALL_MOD_PATH not set.
*   OLDCONFIG set in config file to "yes".
*   LVM set on command line to "1".
*   DMRAID set on command line to "1".
*   ISCSI not set.
*   BUSYBOX defaulted to "yes".
*   UNIONFS not set.
*   NETBOOT not set.
*   REAL_ROOT not set.
*   DISKLABEL set in config file to "yes".
*   LUKS not set.
*   GPG not set.
*   MDADM set on command line to "1".
*   MDADM_CONFIG not set.
*   E2FSPROGS defaulted to "no".
*   ZFS defaulted to "no".
*   BTRFS defaulted to "no".
*   VIRTIO defaulted to "no".
*   MULTIPATH not set.
*   FIRMWARE not set.
*   FIRMWARE_DIR defaulted to "/lib/firmware".
*   FIRMWARE_FILES not set.
*   INTEGRATED_INITRAMFS not set.
*   WRAP_INITRD not set.
*   GENZIMAGE not set.
*   KEYMAP defaulted to "yes".
*   DOKEYMAPAUTO not set.
*   BUSYBOX_CONFIG not set.
*   INSTALL defaulted to "yes".
*   DEBUGCLEANUP defaulted to "yes".
* KERNEL_ARCH=x86
* Linux Kernel 4.8.17-hardened-r2 for x86_64...
* .. with config file /var/tmp/gentoo.config
* ERROR: /boot is not a directory
* 
* -- Grepping log... --
* 
*   BUSYBOX_CONFIG not set.
*   INSTALL defaulted to "yes".
*   DEBUGCLEANUP defaulted to "yes".
* KERNEL_ARCH=x86
*
* ERROR: /boot is not a directory
* 
* -- End log... --
* 
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
* 
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@g.o. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
* 
* Please do *not* report compilation failures as genkernel bugs!
* 
07 Mar 2017 10:35:33 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
07 Mar 2017 10:35:33 UTC: ERROR   : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1532, in build_kernel
    self._build_kernel(kname = kname)
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1569, in _build_kernel
    env=self.env)
  File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
07 Mar 2017 10:35:33 UTC: ERROR   : Exception running action sequence build_kernel
Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1532, in build_kernel
    self._build_kernel(kname = kname)
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1569, in _build_kernel
    env=self.env)
  File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run
    getattr(self, x)()
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1538, in build_kernel
    print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
07 Mar 2017 10:35:33 UTC: NOTICE  : Cleaning up... Running unbind()
Command exited with non-zero status 2
147.64user 41.64system 3:36.89elapsed 87%CPU (0avgtext+0avgdata 450260maxresident)k
248inputs+8062264outputs (0major+4843802minor)pagefaults 0swaps



Full build log at /home/release/tmp/run/catalyst-auto.20170306.aTrQky/log/hardened_admincd-stage2.log