1 |
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec |
2 |
04 Oct 2019 03:18:51 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf |
3 |
04 Oct 2019 03:18:51 EDT: NOTICE : conf_values[options] = {'kerncache', 'bindist', 'autoresume', 'pkgcache', 'snapcache', 'clear-autoresume', 'seedcache'} |
4 |
04 Oct 2019 03:18:51 EDT: NOTICE : Processing spec file: stage1.spec |
5 |
04 Oct 2019 03:18:52 EDT: NOTICE : Using target: stage1 |
6 |
04 Oct 2019 03:18:52 EDT: NOTICE : Source file specification matching setting is: strict |
7 |
04 Oct 2019 03:18:52 EDT: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz'] |
8 |
04 Oct 2019 03:18:54 EDT: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz |
9 |
04 Oct 2019 03:18:54 EDT: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/tmp/stage1root |
10 |
04 Oct 2019 03:18:54 EDT: NOTICE : Removing AutoResume Points ... |
11 |
04 Oct 2019 03:18:54 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191004T071614Z |
12 |
04 Oct 2019 03:18:54 EDT: NOTICE : --- Running action sequence: unpack |
13 |
04 Oct 2019 03:18:54 EDT: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar... |
14 |
04 Oct 2019 03:18:54 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled |
15 |
04 Oct 2019 03:18:54 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up... |
16 |
04 Oct 2019 03:18:54 EDT: NOTICE : Removing AutoResume Points ... |
17 |
04 Oct 2019 03:18:54 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191004T071614Z |
18 |
04 Oct 2019 03:18:54 EDT: NOTICE : Clearing the chroot path ... |
19 |
04 Oct 2019 03:18:54 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z |
20 |
04 Oct 2019 03:18:54 EDT: NOTICE : Starting auto from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz |
21 |
04 Oct 2019 03:18:54 EDT: NOTICE : to /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z (this may take some time) .. |
22 |
04 Oct 2019 03:19:07 EDT: NOTICE : --- Running action sequence: unpack_snapshot |
23 |
04 Oct 2019 03:19:07 EDT: NOTICE : Unpacking portage tree (this can take a long time) ... |
24 |
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: setup_confdir |
25 |
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: portage_overlay |
26 |
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: base_dirs |
27 |
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: bind |
28 |
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: chroot_setup |
29 |
04 Oct 2019 03:19:29 EDT: NOTICE : Setting up chroot... |
30 |
04 Oct 2019 03:19:29 EDT: WARNING : Overriding certain env variables may cause catastrophic failure. |
31 |
04 Oct 2019 03:19:29 EDT: WARNING : If your build fails look here first as the possible problem. |
32 |
04 Oct 2019 03:19:29 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
33 |
04 Oct 2019 03:19:29 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
34 |
04 Oct 2019 03:19:29 EDT: WARNING : You have been warned. |
35 |
04 Oct 2019 03:19:29 EDT: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/etc/portage/make.conf |
36 |
04 Oct 2019 03:19:29 EDT: NOTICE : STICKY-CONFIG is enabled |
37 |
04 Oct 2019 03:19:29 EDT: NOTICE : --- Running action sequence: setup_environment |
38 |
04 Oct 2019 03:19:29 EDT: NOTICE : --- Running action sequence: run_local |
39 |
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/tmp/stage1root/etc/portage |
40 |
Copying stage1-chroot.sh to /tmp |
41 |
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/tmp |
42 |
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/tmp |
43 |
Ensure the file has the executable bit set |
44 |
Running stage1-chroot.sh in chroot: |
45 |
chroot /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z /tmp/stage1-chroot.sh |
46 |
>>> Regenerating /etc/ld.so.cache... |
47 |
Adding USE="${USE} build" to make.conf for portage build |
48 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
49 |
|
50 |
Performing Global Updates |
51 |
(Could take a couple of minutes if you have a lot of binary packages.) |
52 |
|
53 |
|
54 |
>>> Verifying ebuild manifests |
55 |
>>> Running pre-merge checks for sys-apps/portage-2.3.76 |
56 |
* Determining the location of the kernel source code |
57 |
* Unable to find kernel sources at /usr/src/linux |
58 |
* Please make sure that /usr/src/linux points at your running kernel, |
59 |
* (or the kernel you wish to build against). |
60 |
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location |
61 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
62 |
* Unable to check for the following kernel config options due |
63 |
* to absence of any configured kernel sources or compiled |
64 |
* config: |
65 |
* - IPC_NS |
66 |
* - PID_NS |
67 |
* - NET_NS |
68 |
* You're on your own to make sure they are set if needed. |
69 |
>>> Emerging (1 of 1) sys-apps/portage-2.3.76::gentoo |
70 |
>>> Installing (1 of 1) sys-apps/portage-2.3.76::gentoo |
71 |
* Messages for package sys-apps/portage-2.3.76: |
72 |
* Unable to find kernel sources at /usr/src/linux |
73 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
74 |
* Unable to check for the following kernel config options due |
75 |
* to absence of any configured kernel sources or compiled |
76 |
* config: |
77 |
* - IPC_NS |
78 |
* - PID_NS |
79 |
* - NET_NS |
80 |
* You're on your own to make sure they are set if needed. |
81 |
|
82 |
|
83 |
Updating seed stage... |
84 |
emerge --quiet --buildpkg=n --update --deep @world --jobs 2 --load-average 2 |
85 |
[ebuild U ] dev-libs/libffi-3.3_rc0 [3.2.1] |
86 |
[ebuild U ] virtual/libffi-3.3_rc0 [3.0.13-r1] |
87 |
[ebuild U ] sys-libs/e2fsprogs-libs-1.45.4 [1.45.2] |
88 |
[ebuild N ] dev-libs/libbsd-0.9.1 |
89 |
[ebuild U ] dev-libs/libassuan-2.5.3 [2.5.1] |
90 |
[ebuild U ] sys-apps/iproute2-5.2.0-r1 [4.19.0-r1] |
91 |
[ebuild N ] app-crypt/gpgme-1.13.1 |
92 |
[ebuild U ] sys-fs/e2fsprogs-1.45.4 [1.45.2] |
93 |
[ebuild U ] dev-lang/python-3.6.9 [3.6.5] |
94 |
[ebuild U ] dev-lang/python-2.7.16 [2.7.15] |
95 |
[ebuild N ] app-crypt/libb2-0.98.1-r1 |
96 |
[ebuild U ] app-portage/portage-utils-0.80 [0.74] |
97 |
|
98 |
The following keyword changes are necessary to proceed: |
99 |
(see "package.accept_keywords" in the portage(5) man page for more details) |
100 |
# required by app-portage/portage-utils-0.80::gentoo[-static,qmanifest] |
101 |
# required by app-admin/perl-cleaner-2.27::gentoo |
102 |
# required by dev-lang/perl-5.28.2-r1::gentoo |
103 |
# required by virtual/perl-JSON-PP-2.970.10::gentoo |
104 |
# required by virtual/perl-CPAN-Meta-2.150.10-r2::gentoo |
105 |
# required by dev-perl/Module-Build-0.422.400::gentoo |
106 |
# required by dev-perl/SGMLSpm-1.1-r1::gentoo |
107 |
# required by app-text/po4a-0.47-r1::gentoo |
108 |
# required by sys-apps/man-db-2.7.6.1-r2::gentoo[nls] |
109 |
# required by virtual/man-0-r2::gentoo |
110 |
# required by @system |
111 |
# required by @world (argument) |
112 |
=app-crypt/gpgme-1.13.1 ** |
113 |
# required by app-crypt/gpgme-1.13.1::gentoo |
114 |
# required by app-portage/portage-utils-0.80::gentoo[-static,qmanifest] |
115 |
# required by app-admin/perl-cleaner-2.27::gentoo |
116 |
# required by dev-lang/perl-5.28.2-r1::gentoo |
117 |
# required by virtual/perl-JSON-PP-2.970.10::gentoo |
118 |
# required by virtual/perl-CPAN-Meta-2.150.10-r2::gentoo |
119 |
# required by dev-perl/Module-Build-0.422.400::gentoo |
120 |
# required by dev-perl/SGMLSpm-1.1-r1::gentoo |
121 |
# required by app-text/po4a-0.47-r1::gentoo |
122 |
# required by sys-apps/man-db-2.7.6.1-r2::gentoo[nls] |
123 |
# required by virtual/man-0-r2::gentoo |
124 |
# required by @system |
125 |
# required by @world (argument) |
126 |
=dev-libs/libassuan-2.5.3 ~s390 |
127 |
|
128 |
Use --autounmask-write to write changes to config files (honoring |
129 |
CONFIG_PROTECT). Carefully examine the list of proposed changes, |
130 |
paying special attention to mask or keyword changes that may expose |
131 |
experimental or unstable packages. |
132 |
04 Oct 2019 03:20:11 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
133 |
04 Oct 2019 03:20:11 EDT: ERROR : CatalystError: Stage build aborting due to error. |
134 |
04 Oct 2019 03:20:11 EDT: ERROR : Exception running action sequence run_local |
135 |
Traceback (most recent call last): |
136 |
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local |
137 |
env=self.env) |
138 |
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd |
139 |
print_traceback=False) |
140 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
141 |
|
142 |
During handling of the above exception, another exception occurred: |
143 |
|
144 |
Traceback (most recent call last): |
145 |
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run |
146 |
getattr(self, x)() |
147 |
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local |
148 |
print_traceback=False) |
149 |
catalyst.support.CatalystError: Stage build aborting due to error. |
150 |
04 Oct 2019 03:20:11 EDT: NOTICE : Cleaning up... Running unbind() |
151 |
Command exited with non-zero status 2 |
152 |
44.05user 8.94system 1:20.17elapsed 66%CPU (0avgtext+0avgdata 492672maxresident)k |
153 |
0inputs+0outputs (326major+2320212minor)pagefaults 0swaps |
154 |
|
155 |
|
156 |
|
157 |
Full build log at /tmp/catalyst-auto.20191004T071614Z.5ih6xM/log/stage1.log |