| 1 |
22 Jan 2018 03:25:30 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf |
| 2 |
22 Jan 2018 03:25:30 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'pkgcache', 'bindist', 'clear-autoresume'} |
| 3 |
22 Jan 2018 03:25:30 UTC: NOTICE : Processing spec file: stage1-nomultilib.spec |
| 4 |
22 Jan 2018 03:25:30 UTC: NOTICE : Using target: stage1 |
| 5 |
22 Jan 2018 03:25:30 UTC: NOTICE : Source file specification matching setting is: loose |
| 6 |
22 Jan 2018 03:25:30 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz'] |
| 7 |
22 Jan 2018 03:25:31 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/default/stage3-amd64-nomultilib-latest.tar.xz |
| 8 |
22 Jan 2018 03:25:31 UTC: NOTICE : stage1 stage path is /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-nomultilib-20180122T030001Z/tmp/stage1root |
| 9 |
22 Jan 2018 03:25:31 UTC: NOTICE : --- Running action sequence: unpack |
| 10 |
22 Jan 2018 03:25:31 UTC: NOTICE : Clearing the chroot path ... |
| 11 |
22 Jan 2018 03:25:31 UTC: NOTICE : Emptying directory: /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-nomultilib-20180122T030001Z |
| 12 |
22 Jan 2018 03:25:31 UTC: NOTICE : Starting auto from /home/release/buildroot/amd64-dev/builds/default/stage3-amd64-nomultilib-latest.tar.xz |
| 13 |
22 Jan 2018 03:25:31 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-nomultilib-20180122T030001Z (this may take some time) .. |
| 14 |
22 Jan 2018 03:25:34 UTC: NOTICE : --- Running action sequence: unpack_snapshot |
| 15 |
22 Jan 2018 03:25:34 UTC: NOTICE : Unpacking portage tree (this can take a long time) ... |
| 16 |
22 Jan 2018 03:25:50 UTC: NOTICE : --- Running action sequence: setup_confdir |
| 17 |
22 Jan 2018 03:25:50 UTC: NOTICE : --- Running action sequence: portage_overlay |
| 18 |
22 Jan 2018 03:25:50 UTC: NOTICE : --- Running action sequence: base_dirs |
| 19 |
22 Jan 2018 03:25:50 UTC: NOTICE : --- Running action sequence: bind |
| 20 |
22 Jan 2018 03:25:50 UTC: NOTICE : --- Running action sequence: chroot_setup |
| 21 |
22 Jan 2018 03:25:50 UTC: NOTICE : Setting up chroot... |
| 22 |
22 Jan 2018 03:25:50 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
| 23 |
22 Jan 2018 03:25:50 UTC: WARNING : If your build fails look here first as the possible problem. |
| 24 |
22 Jan 2018 03:25:50 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
| 25 |
22 Jan 2018 03:25:50 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
| 26 |
22 Jan 2018 03:25:50 UTC: WARNING : You have been warned. |
| 27 |
22 Jan 2018 03:25:50 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-nomultilib-20180122T030001Z/etc/portage/make.conf |
| 28 |
22 Jan 2018 03:25:50 UTC: NOTICE : STICKY-CONFIG is enabled |
| 29 |
22 Jan 2018 03:25:50 UTC: NOTICE : --- Running action sequence: setup_environment |
| 30 |
22 Jan 2018 03:25:50 UTC: NOTICE : --- Running action sequence: run_local |
| 31 |
copying make.conf to /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-nomultilib-20180122T030001Z/tmp/stage1root/etc/portage |
| 32 |
Copying stage1-chroot.sh to /tmp |
| 33 |
copying stage1-chroot.sh to /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-nomultilib-20180122T030001Z/tmp |
| 34 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-nomultilib-20180122T030001Z/tmp |
| 35 |
Ensure the file has the executable bit set |
| 36 |
Running stage1-chroot.sh in chroot: |
| 37 |
chroot /home/release/buildroot/amd64-dev/tmp/default/stage1-amd64-nomultilib-20180122T030001Z /tmp/stage1-chroot.sh |
| 38 |
>>> Regenerating /etc/ld.so.cache... |
| 39 |
Adding USE="${USE} build" to make.conf for portage build |
| 40 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
| 41 |
|
| 42 |
Performing Global Updates |
| 43 |
(Could take a couple of minutes if you have a lot of binary packages.) |
| 44 |
|
| 45 |
|
| 46 |
>>> Verifying ebuild manifests |
| 47 |
>>> Emerging (1 of 1) sys-apps/portage-2.3.19-r1::gentoo |
| 48 |
>>> Installing (1 of 1) sys-apps/portage-2.3.19-r1::gentoo |
| 49 |
Updating seed stage... |
| 50 |
emerge --quiet --buildpkg=n --update --deep @world |
| 51 |
>>> Verifying ebuild manifests |
| 52 |
>>> Emerging (1 of 11) app-admin/eselect-1.4.11::gentoo |
| 53 |
>>> Installing (1 of 11) app-admin/eselect-1.4.11::gentoo |
| 54 |
>>> Emerging (2 of 11) sys-apps/sandbox-2.12::gentoo |
| 55 |
>>> Installing (2 of 11) sys-apps/sandbox-2.12::gentoo |
| 56 |
>>> Emerging (3 of 11) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo |
| 57 |
>>> Installing (3 of 11) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo |
| 58 |
>>> Emerging (4 of 11) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo |
| 59 |
>>> Installing (4 of 11) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo |
| 60 |
>>> Emerging (5 of 11) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo |
| 61 |
>>> Installing (5 of 11) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo |
| 62 |
>>> Emerging (6 of 11) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo |
| 63 |
>>> Installing (6 of 11) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo |
| 64 |
>>> Emerging (7 of 11) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo |
| 65 |
>>> Installing (7 of 11) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo |
| 66 |
>>> Emerging (8 of 11) dev-libs/libxml2-2.9.7::gentoo |
| 67 |
>>> Installing (8 of 11) dev-libs/libxml2-2.9.7::gentoo |
| 68 |
>>> Emerging (9 of 11) sys-apps/kmod-24::gentoo |
| 69 |
>>> Installing (9 of 11) sys-apps/kmod-24::gentoo |
| 70 |
>>> Emerging (10 of 11) dev-libs/libpipeline-1.4.2::gentoo |
| 71 |
>>> Installing (10 of 11) dev-libs/libpipeline-1.4.2::gentoo |
| 72 |
>>> Emerging (11 of 11) dev-libs/glib-2.52.3::gentoo |
| 73 |
>>> Installing (11 of 11) dev-libs/glib-2.52.3::gentoo |
| 74 |
* Messages for package dev-libs/glib-2.52.3: |
| 75 |
* Unable to find kernel sources at /usr/src/linux |
| 76 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
| 77 |
|
| 78 |
|
| 79 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
| 80 |
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/ |
| 81 |
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/ |
| 82 |
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/: |
| 83 |
* Initializing /tmp/stage1root/lib as a symlink |
| 84 |
* Initializing /tmp/stage1root/usr/lib as a symlink |
| 85 |
* Initializing /tmp/stage1root/usr/local/lib as a symlink |
| 86 |
* You should reboot now to get /run mounted with tmpfs! |
| 87 |
|
| 88 |
|
| 89 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/which virtual/pkgconfig sys-devel/gcc virtual/editor sys-devel/patch sys-devel/binutils app-shells/bash:0 app-arch/tar virtual/package-manager app-arch/gzip sys-devel/flex sys-devel/bison sys-apps/net-tools sys-devel/libtool sys-devel/automake sys-devel/autoconf sys-devel/make sys-apps/makedev sys-apps/diffutils sys-apps/findutils sys-apps/baselayout sys-apps/gawk sys-apps/grep sys-apps/sed sys-apps/file app-arch/bzip2 sys-apps/coreutils virtual/libc app-arch/xz-utils sys-apps/less virtual/shadow net-misc/rsync sys-devel/gettext virtual/os-headers sys-devel/gnuconfig net-misc/wget |
| 90 |
|
| 91 |
The following USE changes are necessary to proceed: |
| 92 |
(see "package.use" in the portage(5) man page for more details) |
| 93 |
# required by virtual/pkgconfig-0-r1::gentoo |
| 94 |
# required by sys-apps/portage-2.3.19-r1::gentoo |
| 95 |
# required by virtual/package-manager-0::gentoo |
| 96 |
# required by virtual/package-manager (argument) |
| 97 |
>=dev-util/pkgconf-1.3.7 pkg-config |
| 98 |
|
| 99 |
Use --autounmask-write to write changes to config files (honoring |
| 100 |
CONFIG_PROTECT). Carefully examine the list of proposed changes, |
| 101 |
paying special attention to mask or keyword changes that may expose |
| 102 |
experimental or unstable packages. |
| 103 |
|
| 104 |
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements. |
| 105 |
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)" |
| 106 |
|
| 107 |
The following REQUIRED_USE flag constraints are unsatisfied: |
| 108 |
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) |
| 109 |
|
| 110 |
The above constraints are a subset of the following complete expression: |
| 111 |
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 ) |
| 112 |
|
| 113 |
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild]) |
| 114 |
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary]) |
| 115 |
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary]) |
| 116 |
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary]) |
| 117 |
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary]) |
| 118 |
(dependency required by "sys-devel/libtool" [argument]) |
| 119 |
22 Jan 2018 03:30:22 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
| 120 |
22 Jan 2018 03:30:23 UTC: ERROR : CatalystError: Stage build aborting due to error. |
| 121 |
22 Jan 2018 03:30:23 UTC: ERROR : Exception running action sequence run_local |
| 122 |
Traceback (most recent call last): |
| 123 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local |
| 124 |
env=self.env) |
| 125 |
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd |
| 126 |
print_traceback=False) |
| 127 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
| 128 |
|
| 129 |
During handling of the above exception, another exception occurred: |
| 130 |
|
| 131 |
Traceback (most recent call last): |
| 132 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run |
| 133 |
getattr(self, x)() |
| 134 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local |
| 135 |
print_traceback=False) |
| 136 |
catalyst.support.CatalystError: Stage build aborting due to error. |
| 137 |
22 Jan 2018 03:30:23 UTC: NOTICE : Cleaning up... Running unbind() |
| 138 |
Command exited with non-zero status 2 |
| 139 |
265.28user 50.11system 4:52.60elapsed 107%CPU (0avgtext+0avgdata 350532maxresident)k |
| 140 |
608inputs+4247120outputs (0major+32504149minor)pagefaults 0swaps |
| 141 |
|
| 142 |
|
| 143 |
|
| 144 |
Full build log at /home/release/tmp/run/catalyst-auto.20180122T030001Z.lXbXOC/log/stage1-nomultilib.log |
Archives