Gentoo Archives: gentoo-releng-autobuilds

From: catalyst@×××××××××××××××××××.name
To: jmbsvicetto@×××××.com, gentoo-releng-autobuilds@l.g.o
Subject: [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage1-nomultilib.spec
Date: Sun, 30 Aug 2015 19:21:10
Message-Id: 20150830192109.A9B75F36FD@lantean.jmbsvicetto.name
1 Catalyst git
2 vcs version 8c395e8608549ae910fd09abdcd119e876e8dfdf, date Sun Aug 30 16:40:46 2015 +0000
3 Copyright 2003-2008 Gentoo Foundation
4 Copyright 2008-2012 various authors
5 Distributed under the GNU General Public License version 2.1
6
7 Using command line specified Catalyst configuration file, /etc/catalyst/release/amd64-auto.conf
8 Setting sharedir to default value "/usr/share/catalyst"
9 Setting local_overlay to default value "/usr/local/portage"
10 Setting port_conf to default value "/etc/portage"
11 Setting make_conf to default value "%(port_conf)s/make.conf"
12 Setting storedir to config file value "/home/release/buildroot/amd64-dev"
13 Setting port_tmpdir to default value "/var/tmp/portage"
14 Setting icecream to default value "/var/cache/icecream"
15 Setting archdir to default value "%(PythonDir)s/arch"
16 Setting shdir to default value "/usr/share/catalyst/targets/"
17 Setting snapshot_cache to config file value "/home/release/tmp/snapshots"
18 Setting hash_function to config file value "crc32"
19 Setting packagedir to default value "/usr/portage/packages"
20 Setting snapshot_name to default value "portage-"
21 Setting portdir to config file value "/usr/portage"
22 Setting distdir to config file value "/usr/portage/distfiles"
23 Setting PythonDir to default value "./catalyst"
24 Setting options to config file value "bindist pkgcache preserve_libs seedcache snapcache"
25 Setting repo_name to default value "portage"
26 Package cache support enabled.
27 Snapshot cache support enabled.
28 Seed cache support enabled.
29 Envscript support enabled.
30 Using target: stage1
31 Building natively for amd64
32 stage1 root path is /tmp/stage1root
33 Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage3-amd64-hardened+nomultilib-latest.tar.bz2
34 Caching snapshot to /home/release/tmp/snapshots/20150830
35 stage1 stage path is /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830/tmp/stage1root
36 Location of the package cache is /home/release/buildroot/amd64-dev/packages/hardened/stage1-amd64-hardened+nomultilib-20150830/
37 Checking for processes running in chroot and killing them.
38 StageBase: run() purge
39 >>> Waiting 10 seconds before starting...
40 >>> (Control-C to abort)...
41 Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
42 purge(); clearing autoresume ...
43 purge(); clearing chroot ...
44 Clearing the chroot path ...
45 Emptying directory /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830/
46 purge(); clearing package cache ...
47 purging the pkgcache ...
48 fileops.clear_dir(), /home/release/buildroot/amd64-dev/packages/hardened/stage1-amd64-hardened+nomultilib-20150830/ is not a directory
49 purge(); clearing kerncache ...
50 --- Running action sequence: unpack
51 Referenced SEEDCACHE does not appear to be a directory, trying to untar...
52 lockfile does not exist '/home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830/.catalyst_lock'
53 Read lock may be in effect. skipping lockfile delete...
54 Failed to get lock... someone took it.
55 argument must be an int, or have a fileno() method.
56 Clearing the chroot path ...
57 Emptying directory /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830/
58
59 Starting tar extract from /home/release/buildroot/amd64-dev/builds/hardened/stage3-amd64-hardened+nomultilib-latest.tar.bz2
60 to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830/ (This may take some time) ...
61
62 tar: SELinux support is not available
63 --- Running action sequence: unpack_snapshot
64 Valid snapshot cache, skipping unpack of portage tree...
65 --- Running action sequence: setup_confdir
66 Configuring /etc/portage...
67 --- Running action sequence: portage_overlay
68 --- Running action sequence: base_dirs
69 --- Running action sequence: bind
70 --- Running action sequence: chroot_setup
71 Setting up chroot...
72
73 Warning!!!!
74 Overriding certain env variables may cause catastrophic failure.
75 If your build fails look here first as the possible problem.
76 Catalyst assumes you know what you are doing when setting
77 these variables.
78 Catalyst Maintainers use VERY minimal envscripts if used at all
79 You have been warned
80
81 --- Running action sequence: setup_environment
82 --- Running action sequence: run_local
83 run_local() starting controller script...
84 copying make.conf to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830//tmp/stage1root/etc/portage
85 Copying stage1-chroot.sh to /tmp
86 copying stage1-chroot.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830//tmp
87 copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830//tmp
88 Ensure the file has the executable bit set
89 Running stage1-chroot.sh in chroot:
90 chroot /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened+nomultilib-20150830/ /tmp/stage1-chroot.sh
91 >>> Regenerating /etc/ld.so.cache...
92 Adding USE=' build' to make.conf for portage build
93 emerge --quiet --oneshot --update --newuse sys-apps/portage
94
95 Performing Global Updates
96 (Could take a couple of minutes if you have a lot of binary packages.)
97 s
98
99 Updating seed stage...
100 emerge --quiet --buildpkg=n --update --deep @world
101 "/etc/portage/make.conf", line 15: No closing quotation
102 Traceback (most recent call last):
103 File "/usr/lib/python-exec/python3.4/emerge", line 50, in <module>
104 retval = emerge_main()
105 File "/usr/lib64/python3.4/site-packages/_emerge/main.py", line 1139, in emerge_main
106 action=myaction, args=myfiles, opts=myopts)
107 File "/usr/lib64/python3.4/site-packages/portage/proxy/objectproxy.py", line 31, in __call__
108 return result(*args, **kwargs)
109 File "/usr/lib64/python3.4/site-packages/_emerge/actions.py", line 2339, in load_emerge_config
110 **portage._native_kwargs(kwargs))
111 File "/usr/lib64/python3.4/site-packages/portage/__init__.py", line 594, in create_trees
112 env=env, eprefix=eprefix)
113 File "/usr/lib64/python3.4/site-packages/portage/package/ebuild/config.py", line 357, in __init__
114 expand=make_conf, recursive=True)
115 File "/usr/lib64/python3.4/site-packages/portage/util/__init__.py", line 659, in getconfig
116 recursive=False) or {})
117 File "/usr/lib64/python3.4/site-packages/portage/util/__init__.py", line 743, in getconfig
118 val = _unicode_decode(lex.get_token())
119 File "/usr/lib64/python3.4/shlex.py", line 93, in get_token
120 raw = self.read_token()
121 File "/usr/lib64/python3.4/shlex.py", line 169, in read_token
122 raise ValueError("No closing quotation")
123 ValueError: No closing quotation
124
125 !!! catalyst: cmd() NON-zero return value from: run script failed.
126
127
128 !!! catalyst: Stage build aborting due to error.
129
130 --- Exeption running action sequence:run_local
131 !!! catalyst: Error encountered during run of target stage1
132
133
134
135 Full build log at /home/release/tmp/run/catalyst-auto.F2rsHd/log/hardened_stage1-nomultilib.log