Gentoo Archives: gentoo-releng-autobuilds

From: catalyst@××××××××××××××××××××.org
To: releng@g.o, gentoo-releng-autobuilds@l.g.o
Subject: [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
Date: Fri, 28 Sep 2018 08:49:45
Message-Id: 20180928084944.7536CE09C0@pigeon.gentoo.org
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/TSI'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/TSI'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/TTY'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/TTY'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/VideoBraille'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/VideoBraille'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/Voyager'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/Voyager'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/Virtual'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/Virtual'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/VisioBraille'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/VisioBraille'
set -- ; \
for driver do (cd ./../Drivers/Speech/$driver && make install); done
set -- Linux Screen; \
for driver do (cd ./../Drivers/Screen/$driver && make install); done
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Screen/Linux'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Screen/Linux'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Screen/Screen'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Screen/Screen'
make[1]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Programs'
mv: cannot stat '/var/tmp/portage/app-accessibility/brltty-5.2-r1/image//lib/*.a': No such file or directory
 * ERROR: app-accessibility/brltty-5.2-r1::gentoo failed (install phase):
 *   (no error message)
 * 
 * Call stack:
 *     ebuild.sh, line 124:  Called src_install
 *   environment, line 5733:  Called die
 * The specific snippet of code:
 *       mv "${D}"/${libdir}/*.a "${D}"/usr/${libdir}/ || die;
 * 
 * If you need support, post the output of `emerge --info '=app-accessibility/brltty-5.2-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-accessibility/brltty-5.2-r1::gentoo'`.
!!! When you file a bug report, please include the following information:
GENTOO_VM=  CLASSPATH="" JAVA_HOME=""
JAVACFLAGS="" COMPILER=""
and of course, the output of emerge --info =brltty-5.2
 * The complete build log is located at '/var/tmp/portage/app-accessibility/brltty-5.2-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-accessibility/brltty-5.2-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2'
 * S: '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2'

 * Messages for package sys-fs/eudev-3.2.5:

 * 
 * As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
 * as described in the URL below:
 * https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * 
 * This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
 * between the default or user-modified choice of sys-fs/udev.  If you wish to disable
 * this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
 * exists: touch /etc/udev/rules.d/80-net-name-slot.rules
 * 

 * Messages for package net-misc/vconfig-1.9:

 * MTU problems exist for many ethernet drivers.
 * Reduce the MTU on the interface to 1496 to work around them.

 * Messages for package sys-apps/keyutils-1.5.9-r4:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Unable to check for the following kernel config options due
 * to absence of any configured kernel sources or compiled
 * config:
 *  - KEYS - You must have CONFIG_KEYS to use this package!
 * You're on your own to make sure they are set if needed.

 * Messages for package net-dialup/ppp-2.4.7-r6:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.7-r6/scripts directory.

 * Messages for package net-misc/dhcpcd-6.11.3:

 * 
 * dhcpcd has zeroconf support active by default.
 * This means it will always obtain an IP address even if no
 * DHCP server can be contacted, which will break any existing
 * failover support you may have configured in your net configuration.
 * This behaviour can be controlled with the noipv4ll configuration
 * file option or the -L command line switch.
 * See the dhcpcd and dhcpcd.conf man pages for more details.
 * 
 * Dhcpcd has duid enabled by default, and this may cause issues
 * with some dhcp servers. For more information, see
 * https://bugs.gentoo.org/show_bug.cgi?id=477356
 * 
 * If you activate the lookup-hostname hook to look up your hostname
 * using the dns, you need to install net-dns/bind-tools.

 * Messages for package sys-libs/libkudzu-1.2.57.1:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package dev-python/ndg-httpsclient-0.4.0:

 * The following *-nspkg.pth files were found installed:
 * 
 *   /usr/lib/python2.7/site-packages/ndg_httpsclient-0.4.0-py2.7-nspkg.pth
 * 
 * The presence of those files may break namespaces in Python 3.5+. Please
 * read our documentation on reliable handling of namespaces and update
 * the ebuild accordingly:
 * 
 *   https://wiki.gentoo.org/wiki/Project:Python/Namespace_packages

 * Messages for package sys-apps/hwsetup-1.2-r3:

 * This package is designed for use on the LiveCD only and will do 
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!
 * This package is intended for use on the Gentoo release media.  If
 * you are not building a CD, remove this package.  It will not work
 * properly on a running system, as Gentoo does not use any of the
 * Knoppix-style detection except for CD builds.

 * Messages for package dev-python/ssl-fetch-0.4:

 * This is beta software.
 * The APIs it installs should be considered unstable
 * and are subject to change in these early versions.
 * 
 * Please file any enhancement requests, or bugs
 * at https://github.com/dol-sen/ssl-fetch/issues
 * I am also on IRC @ #gentoo-portage, #gentoo-keys,... of the Freenode network

 * Messages for package sys-apps/openrc-0.38.2:

 * Setting the console font does not work on all HPPA consoles.
 * You can still enable it by running:
 * # rc-update add consolefont boot
 * You have emerged OpenRc without network support. This
 * means you need to SET UP a network manager such as
 * 	net-misc/netifrc, net-misc/dhcpcd, net-misc/wicd,
 * net-misc/NetworkManager, or net-vpn/badvpn.
 * Or, you have the option of emerging openrc with the newnet
 * use flag and configuring /etc/conf.d/network and
 * /etc/conf.d/staticroute if you only use static interfaces.
 * 

 * Messages for package app-accessibility/brltty-5.2-r1:

 * ERROR: app-accessibility/brltty-5.2-r1::gentoo failed (install phase):
 *   (no error message)
 * 
 * Call stack:
 *     ebuild.sh, line 124:  Called src_install
 *   environment, line 5733:  Called die
 * The specific snippet of code:
 *       mv "${D}"/${libdir}/*.a "${D}"/usr/${libdir}/ || die;
 * 
 * If you need support, post the output of `emerge --info '=app-accessibility/brltty-5.2-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-accessibility/brltty-5.2-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/app-accessibility/brltty-5.2-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-accessibility/brltty-5.2-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2'
 * S: '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2'

!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1403, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180927T071022Z/.catalyst_lock'
Command exited with non-zero status 1
15819.77user 20547.07system 10:49:53elapsed 93%CPU (0avgtext+0avgdata 299584maxresident)k
0inputs+0outputs (67major+137271913minor)pagefaults 0swaps



Full build log at /tmp/catalyst-auto.20180927T071022Z.dSszAT/log/installcd-stage1.log