| 1 |
clearing autoresume ... |
| 2 |
Removing AutoResume Points: ... |
| 3 |
Emptying directory /release/buildroot/amd64-dev/tmp/default/.autoresume-stage1-amd64-20150205/ |
| 4 |
clearing chroot ... |
| 5 |
Emptying directory /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20150205/ |
| 6 |
clearing package cache ... |
| 7 |
purging the pkgcache ... |
| 8 |
clearing kerncache ... |
| 9 |
--- Running action sequence: unpack |
| 10 |
Referenced SEEDCACHE does not appear to be a directory, trying to untar... |
| 11 |
No Valid Resume point detected, cleaning up... |
| 12 |
Removing AutoResume Points: ... |
| 13 |
Emptying directory /release/buildroot/amd64-dev/tmp/default/.autoresume-stage1-amd64-20150205/ |
| 14 |
Emptying directory /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20150205/ |
| 15 |
|
| 16 |
Starting tar extract from /release/buildroot/amd64-dev/builds/default/stage3-amd64-latest.tar.bz2 |
| 17 |
to /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20150205/ (This may take some time) ... |
| 18 |
|
| 19 |
tar: XATTR support is not available |
| 20 |
tar: SELinux support is not available |
| 21 |
--- Running action sequence: unpack_snapshot |
| 22 |
Cleaning up invalid snapshot cache at |
| 23 |
/release/tmp/snapshots/20150205/ (This can take a long time)... |
| 24 |
Unpacking portage tree (This can take a long time) ... |
| 25 |
tar: XATTR support is not available |
| 26 |
tar: SELinux support is not available |
| 27 |
lockfile does not exist '/release/tmp/snapshots/20150205/.catalyst_lock' |
| 28 |
--- Running action sequence: setup_confdir |
| 29 |
--- Running action sequence: portage_overlay |
| 30 |
--- Running action sequence: base_dirs |
| 31 |
--- Running action sequence: bind |
| 32 |
--- Running action sequence: chroot_setup |
| 33 |
Setting up chroot... |
| 34 |
|
| 35 |
Warning!!!! |
| 36 |
Overriding certain env variables may cause catastrophic failure. |
| 37 |
If your build fails look here first as the possible problem. |
| 38 |
Catalyst assumes you know what you are doing when setting |
| 39 |
these variables. |
| 40 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
| 41 |
You have been warned |
| 42 |
|
| 43 |
--- Running action sequence: setup_environment |
| 44 |
--- Running action sequence: run_local |
| 45 |
copying make.conf to /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20150205///tmp/stage1root/etc/portage |
| 46 |
Copying stage1-chroot.sh to /tmp |
| 47 |
copying stage1-chroot.sh to /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20150205//tmp |
| 48 |
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20150205//tmp |
| 49 |
Ensure the file has the executable bit set |
| 50 |
Running stage1-chroot.sh in chroot /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20150205/ |
| 51 |
>>> Regenerating /etc/ld.so.cache... |
| 52 |
Adding USE=' build' to make.conf for portage build |
| 53 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
| 54 |
|
| 55 |
Performing Global Updates |
| 56 |
(Could take a couple of minutes if you have a lot of binary packages.) |
| 57 |
|
| 58 |
|
| 59 |
>>> Verifying ebuild manifests |
| 60 |
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1 |
| 61 |
>>> Installing (1 of 2) dev-lang/python-exec-2.0.1-r1 |
| 62 |
>>> Emerging (2 of 2) sys-apps/portage-2.2.14 |
| 63 |
>>> Installing (2 of 2) sys-apps/portage-2.2.14 |
| 64 |
|
| 65 |
* Messages for package sys-apps/portage-2.2.14: |
| 66 |
|
| 67 |
* Could not find a UTF-8 locale. This may trigger build failures in |
| 68 |
* some python packages. Please ensure that a UTF-8 locale is listed in |
| 69 |
* /etc/locale.gen and run locale-gen. |
| 70 |
Updating seed stage... |
| 71 |
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc |
| 72 |
>>> Recording sys-devel/gcc in "world" favorites file... |
| 73 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
| 74 |
>>> Verifying ebuild manifests |
| 75 |
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/ |
| 76 |
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/ |
| 77 |
|
| 78 |
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/: |
| 79 |
|
| 80 |
* Initializing /tmp/stage1root/lib as a symlink |
| 81 |
* Initializing /tmp/stage1root/usr/lib as a symlink |
| 82 |
* Initializing /tmp/stage1root/usr/local/lib as a symlink |
| 83 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc |
| 84 |
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/ |
| 85 |
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/ |
| 86 |
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/ |
| 87 |
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/ |
| 88 |
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/ |
| 89 |
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/ |
| 90 |
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/ |
| 91 |
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/ |
| 92 |
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/ |
| 93 |
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/ |
| 94 |
[ebuild N ] sys-libs/timezone-data-2014i-r1 to /tmp/stage1root/ |
| 95 |
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/ |
| 96 |
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/ |
| 97 |
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/ |
| 98 |
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/ |
| 99 |
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/ |
| 100 |
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/ |
| 101 |
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/ |
| 102 |
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/ |
| 103 |
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/ |
| 104 |
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/ |
| 105 |
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/ |
| 106 |
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/ |
| 107 |
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/ |
| 108 |
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/ |
| 109 |
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/ |
| 110 |
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/ |
| 111 |
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/ |
| 112 |
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/ |
| 113 |
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/ |
| 114 |
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/ |
| 115 |
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/ |
| 116 |
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/ |
| 117 |
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/ |
| 118 |
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/ |
| 119 |
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/ |
| 120 |
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/ |
| 121 |
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/ |
| 122 |
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/ |
| 123 |
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/ |
| 124 |
[ebuild N ] dev-libs/libltdl-2.4.4 |
| 125 |
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/ |
| 126 |
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/ |
| 127 |
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/ |
| 128 |
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/ |
| 129 |
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/ |
| 130 |
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/ |
| 131 |
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/ |
| 132 |
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/ |
| 133 |
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/ |
| 134 |
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/ |
| 135 |
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/ |
| 136 |
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/ |
| 137 |
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/ |
| 138 |
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/ |
| 139 |
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/ |
| 140 |
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/ |
| 141 |
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/ |
| 142 |
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/ |
| 143 |
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/ |
| 144 |
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/ |
| 145 |
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/ |
| 146 |
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/ |
| 147 |
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/ |
| 148 |
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/ |
| 149 |
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/ |
| 150 |
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/ |
| 151 |
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/ |
| 152 |
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/ |
| 153 |
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/ |
| 154 |
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/ |
| 155 |
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/ |
| 156 |
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ |
| 157 |
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/ |
| 158 |
[ebuild N ] virtual/editor-0 to /tmp/stage1root/ |
| 159 |
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/ |
| 160 |
[ebuild N ] virtual/libc-0 to /tmp/stage1root/ |
| 161 |
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/ |
| 162 |
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/ |
| 163 |
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4) |
| 164 |
|
| 165 |
* Error: The above package list contains packages which cannot be |
| 166 |
* installed at the same time on the same system. |
| 167 |
|
| 168 |
(dev-libs/libltdl-2.4.4:0/0::gentoo, ebuild scheduled for merge) pulled in by |
| 169 |
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/') |
| 170 |
|
| 171 |
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by |
| 172 |
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/') |
| 173 |
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/') |
| 174 |
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/') |
| 175 |
|
| 176 |
|
| 177 |
!!! catalyst: run script failed. |
| 178 |
|
| 179 |
|
| 180 |
Traceback (most recent call last): |
| 181 |
File "modules/generic_stage_target.py", line 1244, in run_local |
| 182 |
"run script failed.",env=self.env) |
| 183 |
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd |
| 184 |
raise CatalystError,myexc |
| 185 |
CatalystError |
| 186 |
None |
| 187 |
|
| 188 |
!!! catalyst: Stage build aborting due to error. |
| 189 |
|
| 190 |
Traceback (most recent call last): |
| 191 |
File "/usr/lib64/catalyst/catalyst", line 218, in build_target |
| 192 |
mytarget.run() |
| 193 |
File "modules/generic_stage_target.py", line 1304, in run |
| 194 |
apply(getattr(self,x)) |
| 195 |
File "modules/generic_stage_target.py", line 1249, in run_local |
| 196 |
raise CatalystError,"Stage build aborting due to error." |
| 197 |
CatalystError |
| 198 |
!!! catalyst: Error encountered during run of target stage1 |
| 199 |
Catalyst aborting.... |
| 200 |
lockfile does not exist '/release/buildroot/amd64-dev/tmp/default/stage1-amd64-20150205/.catalyst_lock' |
| 201 |
|
| 202 |
|
| 203 |
|
| 204 |
Full build log at /release/tmp/run/catalyst-auto.MJON5b/log/stage1.log |
Archives