| 1 |
--- Running action sequence: setup_confdir |
| 2 |
Configuring /etc/portage... |
| 3 |
--- Running action sequence: portage_overlay |
| 4 |
--- Running action sequence: base_dirs |
| 5 |
--- Running action sequence: bind |
| 6 |
--- Running action sequence: chroot_setup |
| 7 |
Setting up chroot... |
| 8 |
|
| 9 |
Warning!!!! |
| 10 |
Overriding certain env variables may cause catastrophic failure. |
| 11 |
If your build fails look here first as the possible problem. |
| 12 |
Catalyst assumes you know what you are doing when setting |
| 13 |
these variables. |
| 14 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
| 15 |
You have been warned |
| 16 |
|
| 17 |
--- Running action sequence: setup_environment |
| 18 |
--- Running action sequence: run_local |
| 19 |
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170721///tmp/stage1root/etc/portage |
| 20 |
Copying stage1-chroot.sh to /tmp |
| 21 |
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170721//tmp |
| 22 |
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170721//tmp |
| 23 |
Ensure the file has the executable bit set |
| 24 |
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170721/ |
| 25 |
>>> Regenerating /etc/ld.so.cache... |
| 26 |
Adding USE=' build' to make.conf for portage build |
| 27 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
| 28 |
|
| 29 |
Performing Global Updates |
| 30 |
(Could take a couple of minutes if you have a lot of binary packages.) |
| 31 |
|
| 32 |
|
| 33 |
Updating seed stage... |
| 34 |
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc |
| 35 |
>>> Recording sys-devel/gcc in "world" favorites file... |
| 36 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
| 37 |
>>> Verifying ebuild manifests |
| 38 |
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/ |
| 39 |
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/ |
| 40 |
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/: |
| 41 |
* Initializing /tmp/stage1root/lib as a dir |
| 42 |
* Initializing /tmp/stage1root/usr/lib as a dir |
| 43 |
* Initializing /tmp/stage1root/usr/local/lib as a dir |
| 44 |
* You should reboot the system now to get /run mounted with tmpfs! |
| 45 |
|
| 46 |
|
| 47 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/bzip2 sys-apps/less sys-apps/makedev sys-apps/sed sys-apps/coreutils sys-devel/gettext app-arch/tar sys-devel/libtool net-misc/wget sys-apps/net-tools sys-devel/bison app-shells/bash:0 virtual/shadow sys-apps/baselayout sys-devel/binutils net-misc/rsync sys-devel/gnuconfig sys-apps/gawk sys-devel/patch sys-apps/which virtual/package-manager virtual/libc virtual/pkgconfig sys-devel/make sys-devel/automake app-arch/gzip virtual/editor sys-apps/diffutils sys-apps/findutils sys-devel/flex virtual/os-headers sys-devel/gcc sys-apps/file sys-devel/autoconf app-arch/xz-utils sys-apps/grep |
| 48 |
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/ |
| 49 |
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/ |
| 50 |
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/ |
| 51 |
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/ |
| 52 |
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/ |
| 53 |
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/ |
| 54 |
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/ |
| 55 |
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/ |
| 56 |
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/ |
| 57 |
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/ |
| 58 |
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/ |
| 59 |
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/ |
| 60 |
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/ |
| 61 |
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/ |
| 62 |
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/ |
| 63 |
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/ |
| 64 |
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/ |
| 65 |
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/ |
| 66 |
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/ |
| 67 |
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/ |
| 68 |
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/ |
| 69 |
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/ |
| 70 |
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/ |
| 71 |
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/ |
| 72 |
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/ |
| 73 |
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/ |
| 74 |
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/ |
| 75 |
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/ |
| 76 |
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/ |
| 77 |
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/ |
| 78 |
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/ |
| 79 |
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/ |
| 80 |
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/ |
| 81 |
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/ |
| 82 |
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/ |
| 83 |
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/ |
| 84 |
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/ |
| 85 |
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/ |
| 86 |
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/ |
| 87 |
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/ |
| 88 |
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/ |
| 89 |
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/ |
| 90 |
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/ |
| 91 |
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/ |
| 92 |
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/ |
| 93 |
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/ |
| 94 |
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/ |
| 95 |
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/ |
| 96 |
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/ |
| 97 |
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/ |
| 98 |
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/ |
| 99 |
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/ |
| 100 |
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/ |
| 101 |
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/ |
| 102 |
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/ |
| 103 |
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/ |
| 104 |
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/ |
| 105 |
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/ |
| 106 |
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/ |
| 107 |
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/ |
| 108 |
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/ |
| 109 |
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/ |
| 110 |
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/ |
| 111 |
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/ |
| 112 |
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/ |
| 113 |
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/ |
| 114 |
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/ |
| 115 |
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/ |
| 116 |
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/ |
| 117 |
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/ |
| 118 |
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/ |
| 119 |
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/ |
| 120 |
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/ |
| 121 |
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/ |
| 122 |
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ |
| 123 |
[ebuild N ] virtual/libc-1 to /tmp/stage1root/ |
| 124 |
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/ |
| 125 |
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/ |
| 126 |
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/ |
| 127 |
[ebuild N ] virtual/editor-0 to /tmp/stage1root/ |
| 128 |
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/ |
| 129 |
|
| 130 |
The following keyword changes are necessary to proceed: |
| 131 |
(see "package.accept_keywords" in the portage(5) man page for more details) |
| 132 |
# required by sys-devel/gettext (argument) |
| 133 |
=sys-devel/gettext-0.19.8.1 ~s390 |
| 134 |
# required by virtual/libffi-3.0.13-r1::gentoo |
| 135 |
# required by dev-lang/python-2.7.12::gentoo |
| 136 |
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7] |
| 137 |
# required by virtual/package-manager-0::gentoo |
| 138 |
# required by @system |
| 139 |
# required by @world (argument) |
| 140 |
=dev-libs/libffi-3.2.1 ~s390 |
| 141 |
# required by dev-lang/perl-5.24.2::gentoo |
| 142 |
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo |
| 143 |
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390 |
| 144 |
# required by dev-lang/perl-5.24.2::gentoo |
| 145 |
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo |
| 146 |
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390 |
| 147 |
# required by virtual/perl-File-Path-2.130.0::gentoo |
| 148 |
# required by dev-lang/perl-5.24.2::gentoo |
| 149 |
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo |
| 150 |
=perl-core/File-Path-2.130.0 ~s390 |
| 151 |
# required by sys-apps/grep (argument) |
| 152 |
=sys-apps/grep-3.1 ~s390 |
| 153 |
# required by app-eselect/eselect-python-20160516::gentoo |
| 154 |
# required by dev-lang/python-2.7.12::gentoo |
| 155 |
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7] |
| 156 |
# required by virtual/package-manager-0::gentoo |
| 157 |
# required by @system |
| 158 |
# required by @world (argument) |
| 159 |
=app-admin/eselect-1.4.9 ~s390 |
| 160 |
# required by virtual/editor-0::gentoo |
| 161 |
# required by virtual/editor (argument) |
| 162 |
=app-editors/nano-2.8.5 ~s390 |
| 163 |
# required by dev-lang/perl-5.24.2::gentoo |
| 164 |
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo |
| 165 |
=virtual/perl-File-Path-2.130.0 ~s390 |
| 166 |
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo |
| 167 |
=dev-lang/perl-5.24.2 ~s390 |
| 168 |
|
| 169 |
Use --autounmask-write to write changes to config files (honoring |
| 170 |
CONFIG_PROTECT). Carefully examine the list of proposed changes, |
| 171 |
paying special attention to mask or keyword changes that may expose |
| 172 |
experimental or unstable packages. |
| 173 |
|
| 174 |
!!! catalyst: run script failed. |
| 175 |
|
| 176 |
|
| 177 |
Traceback (most recent call last): |
| 178 |
File "modules/generic_stage_target.py", line 1244, in run_local |
| 179 |
"run script failed.",env=self.env) |
| 180 |
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd |
| 181 |
raise CatalystError,myexc |
| 182 |
CatalystError |
| 183 |
None |
| 184 |
|
| 185 |
!!! catalyst: Stage build aborting due to error. |
| 186 |
|
| 187 |
Traceback (most recent call last): |
| 188 |
File "/usr/lib/catalyst/catalyst", line 218, in build_target |
| 189 |
mytarget.run() |
| 190 |
File "modules/generic_stage_target.py", line 1304, in run |
| 191 |
apply(getattr(self,x)) |
| 192 |
File "modules/generic_stage_target.py", line 1249, in run_local |
| 193 |
raise CatalystError,"Stage build aborting due to error." |
| 194 |
CatalystError |
| 195 |
!!! catalyst: Error encountered during run of target stage1 |
| 196 |
Catalyst aborting.... |
| 197 |
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170721/.catalyst_lock' |
| 198 |
Command exited with non-zero status 1 |
| 199 |
33.17user 5.91system 0:47.72elapsed 81%CPU (0avgtext+0avgdata 167888maxresident)k |
| 200 |
0inputs+0outputs (403major+1447230minor)pagefaults 0swaps |
| 201 |
|
| 202 |
|
| 203 |
|
| 204 |
Full build log at /tmp/catalyst-auto.20170721.162GCN/log/stage1.log |
Archives