[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - hardened/stage4-minimal.spec

06 Feb 2018 10:12:52 UTC: NOTICE  : Emptying directory: /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z
06 Feb 2018 10:12:52 UTC: NOTICE  : Starting auto from /home/release/buildroot/amd64-dev/builds/hardened/stage3-amd64-hardened-latest.tar.xz
06 Feb 2018 10:12:52 UTC: NOTICE  : to /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z (this may take some time) ..
06 Feb 2018 10:12:55 UTC: NOTICE  : --- Running action sequence: unpack_snapshot
06 Feb 2018 10:12:55 UTC: NOTICE  : Unpacking portage tree (this can take a long time) ...
06 Feb 2018 10:13:05 UTC: NOTICE  : --- Running action sequence: config_profile_link
06 Feb 2018 10:13:05 UTC: NOTICE  : --- Running action sequence: setup_confdir
06 Feb 2018 10:13:05 UTC: NOTICE  : --- Running action sequence: portage_overlay
06 Feb 2018 10:13:05 UTC: NOTICE  : --- Running action sequence: bind
06 Feb 2018 10:13:05 UTC: NOTICE  : --- Running action sequence: chroot_setup
06 Feb 2018 10:13:05 UTC: NOTICE  : Setting up chroot...
06 Feb 2018 10:13:05 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
06 Feb 2018 10:13:05 UTC: WARNING : If your build fails look here first as the possible problem.
06 Feb 2018 10:13:05 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
06 Feb 2018 10:13:05 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
06 Feb 2018 10:13:05 UTC: WARNING : You have been warned.
06 Feb 2018 10:13:05 UTC: NOTICE  : Writing the stage make.conf to: /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/etc/portage/make.conf
06 Feb 2018 10:13:05 UTC: NOTICE  : STICKY-CONFIG is enabled
06 Feb 2018 10:13:05 UTC: NOTICE  : --- Running action sequence: setup_environment
06 Feb 2018 10:13:05 UTC: NOTICE  : --- Running action sequence: build_packages
Copying stage4-chroot.sh to /tmp
copying stage4-chroot.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp
Ensure the file has the executable bit set
Running stage4-chroot.sh in chroot:
    chroot /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z /tmp/stage4-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
Bringing system up to date using profile specific use flags
emerge --quiet --usepkg --buildpkg --newuse -u @system
Emerging packages using stage4 use flags
emerge --quiet --usepkg --buildpkg --newuse app-admin/sudo net-misc/dhcp sys-boot/grub sys-apps/dmidecode sys-apps/gptfdisk sys-apps/iproute2 sys-apps/lsb-release sys-devel/bc sys-power/acpid
>>> Running pre-merge checks for sys-power/acpid-2.0.28
 * Determining the location of the kernel source code
 * Unable to find kernel sources at /usr/src/linux
 * Please make sure that /usr/src/linux points at your running kernel, 
 * (or the kernel you wish to build against).
 * Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Checking for suitable kernel configuration options...
 [ ok ]
>>> Emerging binary (1 of 21) dev-libs/libunistring-0.9.7::gentoo
>>> Installing (1 of 21) dev-libs/libunistring-0.9.7::gentoo
>>> Emerging binary (2 of 21) dev-libs/libtasn1-4.12-r1::gentoo
>>> Installing (2 of 21) dev-libs/libtasn1-4.12-r1::gentoo
>>> Emerging binary (3 of 21) sys-apps/dmidecode-3.0::gentoo
>>> Installing (3 of 21) sys-apps/dmidecode-3.0::gentoo
>>> Recording sys-apps/dmidecode in "world" favorites file...
>>> Emerging binary (4 of 21) sys-apps/lsb-release-1.4::gentoo
>>> Installing (4 of 21) sys-apps/lsb-release-1.4::gentoo
>>> Recording sys-apps/lsb-release in "world" favorites file...
>>> Emerging binary (5 of 21) sys-power/acpid-2.0.28::gentoo
>>> Installing (5 of 21) sys-power/acpid-2.0.28::gentoo
>>> Recording sys-power/acpid in "world" favorites file...
>>> Emerging binary (6 of 21) sys-libs/efivar-31::gentoo
>>> Installing (6 of 21) sys-libs/efivar-31::gentoo
>>> Emerging binary (7 of 21) dev-libs/nettle-3.3-r2::gentoo
>>> Installing (7 of 21) dev-libs/nettle-3.3-r2::gentoo
>>> Emerging binary (8 of 21) net-dns/libidn2-2.0.4::gentoo
>>> Installing (8 of 21) net-dns/libidn2-2.0.4::gentoo
>>> Emerging binary (9 of 21) app-admin/metalog-3-r2::gentoo
>>> Installing (9 of 21) app-admin/metalog-3-r2::gentoo
>>> Emerging binary (10 of 21) virtual/libudev-232::gentoo
>>> Installing (10 of 21) virtual/libudev-232::gentoo
>>> Emerging binary (11 of 21) net-misc/dhcp-4.3.5::gentoo
>>> Installing (11 of 21) net-misc/dhcp-4.3.5::gentoo
>>> Recording net-misc/dhcp in "world" favorites file...
>>> Emerging binary (12 of 21) sys-apps/gptfdisk-1.0.1::gentoo
>>> Installing (12 of 21) sys-apps/gptfdisk-1.0.1::gentoo
>>> Recording sys-apps/gptfdisk in "world" favorites file...
>>> Emerging binary (13 of 21) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (13 of 21) sys-devel/bc-1.06.95-r2::gentoo
>>> Recording sys-devel/bc in "world" favorites file...
>>> Emerging binary (14 of 21) sys-apps/pciutils-3.4.1::gentoo
>>> Installing (14 of 21) sys-apps/pciutils-3.4.1::gentoo
>>> Emerging binary (15 of 21) net-libs/gnutls-3.5.15::gentoo
>>> Installing (15 of 21) net-libs/gnutls-3.5.15::gentoo
>>> Emerging binary (16 of 21) virtual/logger-0::gentoo
>>> Installing (16 of 21) virtual/logger-0::gentoo
>>> Emerging binary (17 of 21) sys-boot/efibootmgr-15::gentoo
>>> Installing (17 of 21) sys-boot/efibootmgr-15::gentoo
>>> Emerging binary (18 of 21) mail-mta/nullmailer-2.0-r1::gentoo
>>> Installing (18 of 21) mail-mta/nullmailer-2.0-r1::gentoo
>>> Emerging binary (19 of 21) virtual/mta-1::gentoo
>>> Installing (19 of 21) virtual/mta-1::gentoo
>>> Emerging binary (20 of 21) sys-boot/grub-2.02::gentoo
>>> Installing (20 of 21) sys-boot/grub-2.02::gentoo
>>> Recording sys-boot/grub in "world" favorites file...
>>> Emerging binary (21 of 21) app-admin/sudo-1.8.20_p2::gentoo
>>> Installing (21 of 21) app-admin/sudo-1.8.20_p2::gentoo
>>> Recording app-admin/sudo in "world" favorites file...
 * Messages for package sys-power/acpid-2.0.28:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-power/acpid-2.0.28:
 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * https://wiki.gentoo.org/wiki/Power_management/Guide
 * 
 * You should reboot the system now to get /run mounted with tmpfs!
 * Messages for package mail-mta/nullmailer-2.0-r1:
 * To create an initial setup, please do:
 * emerge --config =mail-mta/nullmailer-2.0-r1
 * Messages for package sys-boot/grub-2.02:
 * For information on how to configure GRUB2 please refer to the guide:
 *     https://wiki.gentoo.org/wiki/GRUB2_Quick_Start
 * 
 * You may consider installing the following optional packages:
 *   sys-boot/os-prober for Detect other operating systems (grub-mkconfig)
 *   dev-libs/libisoburn for Create rescue media (grub-mkrescue)
 *   sys-fs/mdadm for Enable RAID device detection
 * Messages for package app-admin/sudo-1.8.20_p2:
 * To use the -A (askpass) option, you need to install a compatible
 * password program from the following list. Starred packages will
 * automatically register for the use with sudo (but will not force
 * the -A option):
 * 
 *  [*] net-misc/ssh-askpass-fullscreen
 *      net-misc/x11-ssh-askpass
 * 
 * You can override the choice by setting the SUDO_ASKPASS environmnent
 * variable to the program you want to use.










removing /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp/stage4-chroot.sh from the chroot
removing /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp/chroot-functions.sh from the chroot
06 Feb 2018 10:14:23 UTC: NOTICE  : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
    chroot /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/genkernel-3.4.52.4-r2
>>> Emerging binary (1 of 2) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 2) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 2) sys-kernel/genkernel-3.4.52.4-r2::gentoo
>>> Installing (2 of 2) sys-kernel/genkernel-3.4.52.4-r2::gentoo
 * Messages for package sys-kernel/genkernel-3.4.52.4-r2:
 * Documentation is available in the genkernel manual page
 * as well as the following URL:
 * https://wiki.gentoo.org/wiki/Genkernel
 * This package is known to not work with reiser4.  If you are running
 * reiser4 and have a problem, do not file a bug.  We know it does not
 * work and we don't plan on fixing it since reiser4 is the one that is
 * broken in this regard.  Try using a sane filesystem like ext4.
 * The LUKS support has changed from versions prior to 3.4.4.  Now,
 * you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.


removing /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp/pre-kmerge.sh from the chroot
removing /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
    chroot /home/release/buildroot/amd64-dev/tmp/hardened/stage4-amd64-hardened+minimal-20180206T032212Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.52.4 found ... OK
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Emerging binary (1 of 1) sys-kernel/gentoo-sources-4.9.76-r1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.9.76-r1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
 * Messages for package sys-kernel/gentoo-sources-4.9.76-r1:
 * If you are upgrading from a previous kernel, you may be interested
 * in the following document:
 *   - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade


Adjusting /usr/src/linux to point to /usr/src/linux-4.9.76-gentoo-r1
Setting extraversion to openstack
* Gentoo Linux Genkernel; Version 3.4.52.4
* Running with options: --all-ramdisk-modules --cachedir=/tmp/kerncache/gentoo-genkernel_cache-hardened+minimal-20180206T032212Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-hardened+minimal-20180206T032212Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-hardened+minimal-20180206T032212Z.tar.bz2 all --kernel-config=/var/tmp/gentoo.config

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* Linux Kernel 4.9.76-gentoo-r1-openstack for x86_64...
* .. with config file /var/tmp/gentoo.config
* kernel: Using config from /var/tmp/gentoo.config
* kernel: >> Running mrproper...
*         >> Running oldconfig...
* kernel: >> Cleaning...
*         >> Compiling 4.9.76-gentoo-r1-openstack bzImage...
Command terminated by signal 1
68.71user 21.37system 2:55.40elapsed 51%CPU (0avgtext+0avgdata 349636maxresident)k
16inputs+3428648outputs (0major+4280676minor)pagefaults 0swaps



Full build log at /home/release/tmp/run/catalyst-auto.20180206T032212Z.5Dbhjf/log/hardened_stage4-minimal.log