| 1 |
Catalyst, version 2.0.18 |
| 2 |
Copyright 2003-2008 Gentoo Foundation |
| 3 |
Copyright 2008-2012 various authors |
| 4 |
Distributed under the GNU General Public License version 2.1 |
| 5 |
|
| 6 |
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf |
| 7 |
Setting sharedir to config file value "/usr/lib/catalyst" |
| 8 |
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache" |
| 9 |
Setting hash_function to config file value "crc32" |
| 10 |
Setting storedir to config file value "/usr/local/catalyst" |
| 11 |
Setting portdir to config file value "/usr/portage" |
| 12 |
Setting distdir to config file value "/usr/portage/distfiles" |
| 13 |
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache" |
| 14 |
Autoresuming support enabled. |
| 15 |
Binary redistribution enabled |
| 16 |
Package cache support enabled. |
| 17 |
Seed cache support enabled. |
| 18 |
Snapshot cache support enabled. |
| 19 |
Envscript support enabled. |
| 20 |
Using target: stage1 |
| 21 |
Building natively for hppa |
| 22 |
stage1 root path is /tmp/stage1root |
| 23 |
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-latest.tar.bz2 |
| 24 |
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150508/ |
| 25 |
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-stage1-hppa1.1-20150508/ |
| 26 |
stage1 stage path is /usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508/tmp/stage1root |
| 27 |
Location of the package cache is /usr/local/catalyst/packages/default/stage1-hppa1.1-20150508/ |
| 28 |
Checking for processes running in chroot and killing them. |
| 29 |
Removing AutoResume Points: ... |
| 30 |
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-stage1-hppa1.1-20150508/ |
| 31 |
>>> Waiting 10 seconds before starting... |
| 32 |
>>> (Control-C to abort)... |
| 33 |
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1 |
| 34 |
clearing autoresume ... |
| 35 |
Removing AutoResume Points: ... |
| 36 |
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-stage1-hppa1.1-20150508/ |
| 37 |
clearing chroot ... |
| 38 |
Emptying directory /usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508/ |
| 39 |
clearing package cache ... |
| 40 |
purging the pkgcache ... |
| 41 |
clearing kerncache ... |
| 42 |
--- Running action sequence: unpack |
| 43 |
Referenced SEEDCACHE does not appear to be a directory, trying to untar... |
| 44 |
No Valid Resume point detected, cleaning up... |
| 45 |
Removing AutoResume Points: ... |
| 46 |
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-stage1-hppa1.1-20150508/ |
| 47 |
Emptying directory /usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508/ |
| 48 |
|
| 49 |
Starting tar extract from /usr/local/catalyst/builds/default/stage3-hppa1.1-latest.tar.bz2 |
| 50 |
to /usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508/ (This may take some time) ... |
| 51 |
|
| 52 |
tar: XATTR support is not available |
| 53 |
tar: SELinux support is not available |
| 54 |
--- Running action sequence: unpack_snapshot |
| 55 |
Cleaning up invalid snapshot cache at |
| 56 |
/usr/local/catalyst/snapshot_cache/20150508/ (This can take a long time)... |
| 57 |
Unpacking portage tree (This can take a long time) ... |
| 58 |
tar: XATTR support is not available |
| 59 |
tar: SELinux support is not available |
| 60 |
lockfile does not exist '/usr/local/catalyst/snapshot_cache/20150508/.catalyst_lock' |
| 61 |
--- Running action sequence: setup_confdir |
| 62 |
--- Running action sequence: portage_overlay |
| 63 |
--- Running action sequence: base_dirs |
| 64 |
--- Running action sequence: bind |
| 65 |
--- Running action sequence: chroot_setup |
| 66 |
Setting up chroot... |
| 67 |
|
| 68 |
Warning!!!! |
| 69 |
Overriding certain env variables may cause catastrophic failure. |
| 70 |
If your build fails look here first as the possible problem. |
| 71 |
Catalyst assumes you know what you are doing when setting |
| 72 |
these variables. |
| 73 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
| 74 |
You have been warned |
| 75 |
|
| 76 |
--- Running action sequence: setup_environment |
| 77 |
--- Running action sequence: run_local |
| 78 |
copying make.conf to /usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508///tmp/stage1root/etc/portage |
| 79 |
Copying stage1-chroot.sh to /tmp |
| 80 |
copying stage1-chroot.sh to /usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508//tmp |
| 81 |
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508//tmp |
| 82 |
Ensure the file has the executable bit set |
| 83 |
Running stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508/ |
| 84 |
>>> Regenerating /etc/ld.so.cache... |
| 85 |
Adding USE=' build' to make.conf for portage build |
| 86 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
| 87 |
|
| 88 |
Performing Global Updates |
| 89 |
(Could take a couple of minutes if you have a lot of binary packages.) |
| 90 |
@ |
| 91 |
|
| 92 |
>>> Verifying ebuild manifests |
| 93 |
>>> Emerging (1 of 1) sys-apps/portage-2.2.18::gentoo |
| 94 |
>>> Installing (1 of 1) sys-apps/portage-2.2.18::gentoo |
| 95 |
|
| 96 |
* Messages for package sys-apps/portage-2.2.18: |
| 97 |
|
| 98 |
* Could not find a UTF-8 locale. This may trigger build failures in |
| 99 |
* some python packages. Please ensure that a UTF-8 locale is listed in |
| 100 |
* /etc/locale.gen and run locale-gen. |
| 101 |
Updating seed stage... |
| 102 |
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc |
| 103 |
[ebuild U ] sys-devel/gnuconfig-20150304 [20140212] |
| 104 |
[ebuild U ] virtual/libiconv-0-r2 [0-r1] |
| 105 |
[ebuild U ] sys-libs/timezone-data-2015b [2014i-r1] |
| 106 |
[ebuild N ] sys-apps/gentoo-functions-0.8 |
| 107 |
[ebuild U ] dev-libs/expat-2.1.0-r4 [2.1.0-r3] |
| 108 |
[ebuild U ] sys-devel/binutils-config-4-r2 [3-r3] |
| 109 |
[ebuild U ] dev-libs/mpc-1.0.2-r1 [1.0.1] |
| 110 |
[ebuild U ] sys-auth/pambase-20150213 [20120417-r3] |
| 111 |
[ebuild U ] perl-core/File-Temp-0.230.400-r1 [0.230.0] |
| 112 |
[ebuild U ] virtual/perl-File-Temp-0.230.400-r2 [0.230.0-r1] |
| 113 |
[ebuild U ] sys-kernel/linux-headers-3.18 [3.16] |
| 114 |
[ebuild U ] dev-lang/perl-5.20.2 [5.18.2-r2] |
| 115 |
[ebuild U ] dev-libs/openssl-1.0.1m [1.0.1k] |
| 116 |
[ebuild U ] app-admin/eselect-1.4.4 [1.4.3] |
| 117 |
[ebuild U ] app-misc/ca-certificates-20140927.3.17.2 [20130906-r1] |
| 118 |
[ebuild N ] dev-libs/libltdl-2.4.6 |
| 119 |
[ebuild U ] sys-devel/libtool-2.4.6 [2.4.2-r1] |
| 120 |
[blocks b ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.6) |
| 121 |
[ebuild U ] sys-devel/gcc-4.8.4 [4.8.3] |
| 122 |
[ebuild U ] sys-apps/util-linux-2.25.2-r2 [2.24.1-r3] |
| 123 |
[ebuild U ] net-misc/rsync-3.1.1 [3.0.9-r3] |
| 124 |
[ebuild U ] dev-libs/libxml2-2.9.2-r1 [2.9.2] |
| 125 |
[ebuild U ] dev-libs/glib-2.42.2 [2.40.2] |
| 126 |
[ebuild U ] dev-util/pkgconfig-0.28-r2 [0.28-r1] |
| 127 |
[ebuild U ] x11-misc/shared-mime-info-1.4 [1.2-r1] |
| 128 |
|
| 129 |
!!! Multiple package instances within a single package slot have been pulled |
| 130 |
!!! into the dependency graph, resulting in a slot conflict: |
| 131 |
|
| 132 |
dev-lang/perl:0 |
| 133 |
|
| 134 |
(dev-lang/perl-5.20.2:0/5.20::gentoo, ebuild scheduled for merge) pulled in by |
| 135 |
(no parents that aren't satisfied by other packages in this slot) |
| 136 |
|
| 137 |
(dev-lang/perl-5.18.2-r2:0/5.18::gentoo, installed) pulled in by |
| 138 |
=dev-lang/perl-5.18* required by (virtual/perl-Module-Build-0.400.300-r1:0/0::gentoo, installed) |
| 139 |
^ ^^^^^ |
| 140 |
dev-lang/perl:0/5.18=[-build(-)] required by (dev-perl/Locale-gettext-1.50.0-r1:0/0::gentoo, installed) |
| 141 |
^^^^^^^^ |
| 142 |
(and 7 more with the same problems) |
| 143 |
|
| 144 |
|
| 145 |
|
| 146 |
!!! The following installed packages are masked: |
| 147 |
- dev-lang/perl-5.18.2-r2::gentoo (masked by: package.mask) |
| 148 |
/usr/portage/profiles/package.mask: |
| 149 |
# Andreas K. Huettel <dilfridge@g.o> (29 Mar 2015) |
| 150 |
# Mask Perl 5.18 for removal. Please upgrade to Perl 5.20 |
| 151 |
|
| 152 |
- virtual/perl-Module-Build-0.400.300-r1::gentoo (masked by: package.mask) |
| 153 |
For more information, see the MASKED PACKAGES section in the emerge |
| 154 |
man page or refer to the Gentoo Handbook. |
| 155 |
|
| 156 |
|
| 157 |
!!! catalyst: run script failed. |
| 158 |
|
| 159 |
|
| 160 |
Traceback (most recent call last): |
| 161 |
File "modules/generic_stage_target.py", line 1244, in run_local |
| 162 |
"run script failed.",env=self.env) |
| 163 |
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd |
| 164 |
raise CatalystError,myexc |
| 165 |
CatalystError |
| 166 |
None |
| 167 |
|
| 168 |
!!! catalyst: Stage build aborting due to error. |
| 169 |
|
| 170 |
Traceback (most recent call last): |
| 171 |
File "/usr/lib/catalyst/catalyst", line 218, in build_target |
| 172 |
mytarget.run() |
| 173 |
File "modules/generic_stage_target.py", line 1304, in run |
| 174 |
apply(getattr(self,x)) |
| 175 |
File "modules/generic_stage_target.py", line 1249, in run_local |
| 176 |
raise CatalystError,"Stage build aborting due to error." |
| 177 |
CatalystError |
| 178 |
!!! catalyst: Error encountered during run of target stage1 |
| 179 |
Catalyst aborting.... |
| 180 |
lockfile does not exist '/usr/local/catalyst/tmp/default/stage1-hppa1.1-20150508/.catalyst_lock' |
| 181 |
|
| 182 |
|
| 183 |
|
| 184 |
Full build log at /tmp/catalyst-auto.DcDxdU/log/hppa1.1_stage1.log |
Archives