[gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec

# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.

- sys-devel/binutils-2.29.1-r1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.

>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-lang/python-exec-2.4.6::gentoo
>>> Installing (1 of 3) dev-lang/python-exec-2.4.6::gentoo
>>> Emerging (2 of 3) dev-lang/python-3.6.5::gentoo
>>> Installing (2 of 3) dev-lang/python-3.6.5::gentoo
>>> Emerging (3 of 3) sys-apps/portage-2.3.51-r1::gentoo
>>> Installing (3 of 3) sys-apps/portage-2.3.51-r1::gentoo
 * Messages for package dev-lang/python-3.6.5:
 * You have just upgraded from an older version of Python.
 * 
 * Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.


Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world

The following packages are causing rebuilds:

  (net-libs/libnsl-1.2.0:0/2::gentoo, ebuild scheduled for merge) causes rebuilds for:
    (app-text/opensp-1.5.2-r3:0/0::gentoo, ebuild scheduled for merge)
  (sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
    (dev-lang/python-3.6.5:3.6/3.6m::gentoo, ebuild scheduled for merge)
    (dev-libs/libxml2-2.9.8:2/2::gentoo, ebuild scheduled for merge)
    (sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
    (dev-lang/python-2.7.15:2.7/2.7::gentoo, ebuild scheduled for merge)
    (sys-apps/util-linux-2.33-r1:0/0::gentoo, ebuild scheduled for merge)
    (sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
    (app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
    (dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
    (dev-libs/libpcre2-10.30:0/0::gentoo, ebuild scheduled for merge)
  (sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) causes rebuilds for:
    (dev-lang/python-3.6.5:3.6/3.6m::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.27-r6
 * Checking general environment sanity.
 * Checking gcc for __thread support ...
 [ ok ]
 * Checking running kernel version (4.14.34-gentoo-infra38 >= 3.2.0) ...
 [ ok ]
 * Checking linux-headers version (4.4.0 >= 3.2.0) ...
 [ ok ]
>>> Running pre-merge checks for sys-devel/gcc-7.3.0-r3
>>> Running pre-merge checks for sys-libs/pam-1.3.0-r2
>>> Running pre-merge checks for sys-fs/eudev-3.2.5
 * 
 * As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
 * as described in the URL below:
 * https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * 
 * This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
 * between the default or user-modified choice of sys-fs/udev.  If you wish to disable
 * this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
 * exists: touch /etc/udev/rules.d/80-net-name-slot.rules
 * 
>>> Running pre-merge checks for net-misc/openssh-7.7_p1-r9
>>> Emerging (1 of 110) sys-kernel/linux-headers-4.14-r1::gentoo
>>> Installing (1 of 110) sys-kernel/linux-headers-4.14-r1::gentoo
>>> Emerging (2 of 110) sys-libs/glibc-2.27-r6::gentoo
>>> Installing (2 of 110) sys-libs/glibc-2.27-r6::gentoo
>>> Emerging (3 of 110) sys-libs/ncurses-6.1-r2::gentoo
>>> Installing (3 of 110) sys-libs/ncurses-6.1-r2::gentoo
>>> Emerging (4 of 110) app-arch/bzip2-1.0.6-r10::gentoo
>>> Installing (4 of 110) app-arch/bzip2-1.0.6-r10::gentoo
>>> Emerging (5 of 110) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (5 of 110) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging (6 of 110) app-arch/gzip-1.9::gentoo
>>> Installing (6 of 110) app-arch/gzip-1.9::gentoo
>>> Emerging (7 of 110) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (7 of 110) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (8 of 110) sys-libs/libseccomp-2.3.3::gentoo
>>> Installing (8 of 110) sys-libs/libseccomp-2.3.3::gentoo
>>> Emerging (9 of 110) sys-apps/busybox-1.29.3::gentoo
>>> Emerging (10 of 110) sys-apps/baselayout-2.6-r1::gentoo
>>> Emerging (11 of 110) app-text/sgml-common-0.6.3-r6::gentoo
>>> Installing (11 of 110) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (12 of 110) sys-devel/automake-wrapper-11::gentoo
>>> Installing (12 of 110) sys-devel/automake-wrapper-11::gentoo
>>> Emerging (13 of 110) sys-devel/autoconf-wrapper-13-r1::gentoo
>>> Installing (13 of 110) sys-devel/autoconf-wrapper-13-r1::gentoo
>>> Emerging (14 of 110) sys-apps/opentmpfiles-0.2::gentoo
>>> Emerging (15 of 110) dev-util/gperf-3.1::gentoo
>>> Installing (15 of 110) dev-util/gperf-3.1::gentoo
>>> Installing (10 of 110) sys-apps/baselayout-2.6-r1::gentoo
>>> Installing (14 of 110) sys-apps/opentmpfiles-0.2::gentoo
>>> Installing (9 of 110) sys-apps/busybox-1.29.3::gentoo
>>> Emerging (16 of 110) sys-libs/timezone-data-2018g-r1::gentoo
>>> Installing (16 of 110) sys-libs/timezone-data-2018g-r1::gentoo
>>> Emerging (17 of 110) sys-devel/binutils-config-5-r4::gentoo
>>> Installing (17 of 110) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (18 of 110) sys-devel/gcc-config-2.0::gentoo
>>> Installing (18 of 110) sys-devel/gcc-config-2.0::gentoo
>>> Emerging (19 of 110) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (19 of 110) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (20 of 110) sys-apps/sysvinit-2.91-r1::gentoo
>>> Installing (20 of 110) sys-apps/sysvinit-2.91-r1::gentoo
>>> Emerging (21 of 110) sys-apps/net-tools-1.60_p20180626073013::gentoo
>>> Installing (21 of 110) sys-apps/net-tools-1.60_p20180626073013::gentoo
>>> Emerging (22 of 110) sys-libs/zlib-1.2.11-r2::gentoo
>>> Installing (22 of 110) sys-libs/zlib-1.2.11-r2::gentoo
>>> Emerging (23 of 110) sys-apps/file-5.34::gentoo
>>> Installing (23 of 110) sys-apps/file-5.34::gentoo
>>> Emerging (24 of 110) sys-devel/patch-2.7.6-r2::gentoo
>>> Failed to emerge sys-devel/patch-2.7.6-r2
 * Messages for package sys-fs/eudev-3.2.5:
 * 
 * As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
 * as described in the URL below:
 * https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * 
 * This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
 * between the default or user-modified choice of sys-fs/udev.  If you wish to disable
 * this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
 * exists: touch /etc/udev/rules.d/80-net-name-slot.rules
 * 
 * Messages for package sys-libs/glibc-2.27-r6:
 * Applying Gentoo Glibc Patchset 2.27-3
 * Generating all locales; edit /etc/locale.gen to save time/space
 * Messages for package sys-apps/baselayout-2.6-r1:
 * You should reboot now to get /run mounted with tmpfs!
 * Please run env-update then log out and back in to
 * update your path.
 * Messages for package sys-apps/busybox-1.29.3:
 * Could not locate user configfile, so we will save a default one
 * Your configuration for sys-apps/busybox-1.29.3 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.29.3 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
 * Messages for package sys-libs/timezone-data-2018g-r1:
 * You do not have TIMEZONE set in /etc/timezone.
 * Skipping auto-update of /etc/localtime.
 * Messages for package sys-apps/sysvinit-2.91-r1:
 * The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
 * sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
 * Messages for package sys-devel/patch-2.7.6-r2:
 * The ebuild phase 'configure' has exited unexpectedly. This type of
 * behavior is known to be triggered by things such as failed variable
 * assignments (bug #190128) or bad substitution errors (bug #200313).
 * Normally, before exiting, bash should have displayed an error message
 * above. If bash did not produce an error message above, it's possible
 * that the ebuild has called `exit` when it should have called `die`
 * instead. This behavior may also be triggered by a corrupt bash binary or
 * a hardware problem such as memory or cpu malfunction. If the problem is
 * not reproducible or it appears to occur randomly, then it is likely to
 * be triggered by a hardware problem. If you suspect a hardware problem
 * then you should try some basic hardware diagnostics such as memtest.
 * Please do not report this as a bug unless it is consistently
 * reproducible and you are sure that your bash binary and hardware are
 * functioning properly.














02 Jan 2019 18:44:12 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
02 Jan 2019 18:44:13 UTC: ERROR   : CatalystError: Stage build aborting due to error.
02 Jan 2019 18:44:13 UTC: ERROR   : Exception running action sequence run_local
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1355, in run_local
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
    getattr(self, x)()
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1364, in run_local
    print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
02 Jan 2019 18:44:13 UTC: NOTICE  : Cleaning up... Running unbind()
Command exited with non-zero status 2
2173.79user 786.08system 32:27.78elapsed 151%CPU (0avgtext+0avgdata 197556maxresident)k
475040inputs+6468760outputs (10major+113671047minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20190102T162102Z.5D4uDO/log/i686_stage1.log