[gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage1.spec

make[1]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/src'
Making all in include
make[1]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include'
Making all in curl
make[2]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include/curl'
(CDPATH="${ZSH_VERSION+.}:" && cd ../.. && /bin/sh "/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/missing" --run autoheader)
rm -f stamp-h3
touch curlbuild.h.in
cd ../.. && /bin/sh ./config.status include/curl/curlbuild.h
config.status: creating include/curl/curlbuild.h
config.status: include/curl/curlbuild.h is unchanged
make  all-am
make[3]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include/curl'
make[3]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include/curl'
make[2]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include/curl'
make[2]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include'
make[1]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include'
make[1]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
/var/tmp/portage/net-misc/curl-7.24.0/temp/environment: line 2838: /usr/portage/net-misc/curl/files/config.h.ed: No such file or directory
 * ERROR: net-misc/curl-7.24.0 failed (compile phase):
 *   (no error message)
 * 
 * Call stack:
 *     ebuild.sh, line  85:  Called src_compile
 *   environment, line 2838:  Called die
 * The specific snippet of code:
 *       ed - lib/curl_config.h < "${FILESDIR}"/config.h.ed || die;
 * 
 * If you need support, post the output of `emerge --info '=net-misc/curl-7.24.0'`,
 * the complete build log and the output of `emerge -pqv '=net-misc/curl-7.24.0'`.
 * The complete build log is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/environment'.
 * Working directory: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
 * S: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'

 * Messages for package net-misc/dhcpcd-5.2.12:

 * You have installed dhcpcd with zeroconf support.
 * This means that it will always obtain an IP address even if no
 * DHCP server can be contacted, which will break any existing
 * failover support you may have configured in your net configuration.
 * This behaviour can be controlled with the -L flag.
 * See the dhcpcd man page for more details.
 * 
 * Users upgrading from 4.0 series should pay attention to removal
 * of compat useflag. This changes behavior of dhcp in wide manner:
 * dhcpcd no longer sends a default ClientID for ethernet interfaces.
 * This is so we can re-use the address the kernel DHCP client found.
 * To retain the old behaviour of sending a default ClientID based on the
 * hardware address for interface, simply add the keyword clientid
 * to dhcpcd.conf or use commandline parameter -I ''
 * 
 * Also, users upgrading from 4.0 series should be aware that
 * the -N, -R and -Y command line options no longer exist.
 * These are controled now by nohook options in dhcpcd.conf.

 * Messages for package sys-power/acpid-2.0.16-r1:

 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * http://www.gentoo.org/doc/en/power-management-guide.xml
 * 

 * Messages for package sys-apps/pciutils-3.1.9-r1:

 * The 'pcimodules' program has been replaced by 'lspci -k'

 * Messages for package app-crypt/pinentry-0.8.0:

 * We no longer install pinentry-curses and pinentry-qt SUID root by default.
 * Linux kernels >=2.6.9 support memory locking for unprivileged processes.
 * The soft resource limit for memory locking specifies the limit an
 * unprivileged process may lock into memory. You can also use POSIX
 * capabilities to allow pinentry to lock memory. To do so activate the caps
 * USE flag and add the CAP_IPC_LOCK capability to the permitted set of
 * your users.

 * Messages for package sys-apps/util-linux-2.20.1-r2:

 * The agetty util now clears the terminal by default.  You
 * might want to add --noclear to your /etc/inittab lines.

 * Messages for package sys-fs/mdadm-3.1.4:

 * If using baselayout-2 and not relying on kernel auto-detect
 * of your RAID devices, you need to add 'mdraid' to your 'boot'
 * runlevel. Run the following command:
 * rc-update add mdraid boot

 * Messages for package sys-apps/hwsetup-1.2-r2:

 * This package is designed for use on the LiveCD only and will do 
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!
 * This package is intended for usage on the Gentoo release media.  If
 * you are not building a CD, remove this package.  It will not work
 * properly on a running system, as Gentoo does not use any of the
 * Knoppix-style detection except for CD builds.

 * Messages for package net-misc/ntp-4.2.6_p5-r1:

 * You can find an example /etc/ntp.conf in /usr/share/ntp/
 * Review /etc/ntp.conf to setup server info.
 * Review /etc/conf.d/ntpd to setup init.d info.
 * The way ntp sets and maintains your system time has changed.
 * Now you can use /etc/init.d/ntp-client to set your time at
 * boot while you can use /etc/init.d/ntpd to maintain your time
 * while your machine runs

 * Messages for package sys-apps/busybox-1.20.1:

 * Could not locate user configfile, so we will save a default one
 * Your configuration for sys-apps/busybox-1.20.1 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.20.1 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]

 * Messages for package net-mail/mailbase-1:

 * Your //var/spool/mail/ directory permissions differ from
 *   those which mailbase set when you first installed it (0775).
 *   If you did not change them on purpose, consider running:
 * 
 *     chmod 0775 //var/spool/mail/

 * Messages for package net-fs/cifs-utils-5.4:

 * You must enable CIFS support in your kernel config, 
 * to be able to mount samba shares. You can find it at
 * 
 *   File systems
 * 	Network File Systems
 * 			CIFS support
 * 
 * and recompile your kernel ...
 * setuid use flag was dropped due to multiple security implications
 * such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
 * You are free to set setuid flags by yourself

 * Messages for package app-misc/livecd-tools-2.0.2:

 * This package is designed for use on the LiveCD only and will do
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!

 * Messages for package sys-fs/e2fsprogs-1.42:

 * No /etc/mtab file, creating one temporarily

 * Messages for package net-misc/curl-7.24.0:

 * ERROR: net-misc/curl-7.24.0 failed (compile phase):
 *   (no error message)
 * 
 * Call stack:
 *     ebuild.sh, line  85:  Called src_compile
 *   environment, line 2838:  Called die
 * The specific snippet of code:
 *       ed - lib/curl_config.h < "${FILESDIR}"/config.h.ed || die;
 * 
 * If you need support, post the output of `emerge --info '=net-misc/curl-7.24.0'`,
 * the complete build log and the output of `emerge -pqv '=net-misc/curl-7.24.0'`.
 * The complete build log is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/environment'.
 * Working directory: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
 * S: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'

!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1353, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1358, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20120828/.catalyst_lock'



Full build log at /tmp/catalyst-auto.29424/log/installcd-stage1.log