| 1 |
Catalyst, version 2.0.18 |
| 2 |
Copyright 2003-2008 Gentoo Foundation |
| 3 |
Copyright 2008-2012 various authors |
| 4 |
Distributed under the GNU General Public License version 2.1 |
| 5 |
|
| 6 |
Using command line specified Catalyst configuration file, /etc/catalyst/release/amd64-auto.conf |
| 7 |
Setting sharedir to config file value "/usr/lib64/catalyst/" |
| 8 |
Setting snapshot_cache to config file value "/home/release/tmp/snapshots" |
| 9 |
Setting hash_function to config file value "crc32" |
| 10 |
Setting storedir to config file value "/home/release/buildroot/amd64-dev" |
| 11 |
Setting portdir to config file value "/usr/portage" |
| 12 |
Setting distdir to config file value "/usr/portage/distfiles" |
| 13 |
Setting options to config file value "autoresume bindist pkgcache preserve_libs seedcache snapcache" |
| 14 |
Autoresuming support enabled. |
| 15 |
Binary redistribution enabled |
| 16 |
Package cache support enabled. |
| 17 |
Preserving libs during unmerge. |
| 18 |
Seed cache support enabled. |
| 19 |
Snapshot cache support enabled. |
| 20 |
Envscript support enabled. |
| 21 |
Using target: stage1 |
| 22 |
Building natively for amd64 |
| 23 |
stage1 root path is /tmp/stage1root |
| 24 |
Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage3-amd64-hardened-selinux+nomultilib-latest.tar.bz2 |
| 25 |
Caching snapshot to /home/release/tmp/snapshots/20150219/ |
| 26 |
The autoresume path is /home/release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 27 |
stage1 stage path is /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219/tmp/stage1root |
| 28 |
Location of the package cache is /home/release/buildroot/amd64-dev/packages/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 29 |
Checking for processes running in chroot and killing them. |
| 30 |
Removing AutoResume Points: ... |
| 31 |
Emptying directory /home/release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 32 |
>>> Waiting 10 seconds before starting... |
| 33 |
>>> (Control-C to abort)... |
| 34 |
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1 |
| 35 |
clearing autoresume ... |
| 36 |
Removing AutoResume Points: ... |
| 37 |
Emptying directory /home/release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 38 |
clearing chroot ... |
| 39 |
Emptying directory /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 40 |
clearing package cache ... |
| 41 |
purging the pkgcache ... |
| 42 |
Emptying directory /home/release/buildroot/amd64-dev/packages/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 43 |
clearing kerncache ... |
| 44 |
--- Running action sequence: unpack |
| 45 |
Referenced SEEDCACHE does not appear to be a directory, trying to untar... |
| 46 |
No Valid Resume point detected, cleaning up... |
| 47 |
Removing AutoResume Points: ... |
| 48 |
Emptying directory /home/release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 49 |
Emptying directory /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 50 |
|
| 51 |
Starting tar extract from /home/release/buildroot/amd64-dev/builds/hardened/stage3-amd64-hardened-selinux+nomultilib-latest.tar.bz2 |
| 52 |
to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219/ (This may take some time) ... |
| 53 |
|
| 54 |
tar: SELinux support is not available |
| 55 |
--- Running action sequence: unpack_snapshot |
| 56 |
Valid snapshot cache, skipping unpack of portage tree... |
| 57 |
--- Running action sequence: setup_confdir |
| 58 |
Configuring /etc/portage... |
| 59 |
--- Running action sequence: portage_overlay |
| 60 |
--- Running action sequence: base_dirs |
| 61 |
--- Running action sequence: bind |
| 62 |
--- Running action sequence: chroot_setup |
| 63 |
Setting up chroot... |
| 64 |
|
| 65 |
Warning!!!! |
| 66 |
Overriding certain env variables may cause catastrophic failure. |
| 67 |
If your build fails look here first as the possible problem. |
| 68 |
Catalyst assumes you know what you are doing when setting |
| 69 |
these variables. |
| 70 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
| 71 |
You have been warned |
| 72 |
|
| 73 |
--- Running action sequence: setup_environment |
| 74 |
--- Running action sequence: run_local |
| 75 |
copying make.conf to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219///tmp/stage1root/etc/portage |
| 76 |
Copying stage1-chroot.sh to /tmp |
| 77 |
copying stage1-chroot.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219//tmp |
| 78 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219//tmp |
| 79 |
Ensure the file has the executable bit set |
| 80 |
Running stage1-chroot.sh in chroot /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219/ |
| 81 |
!!! SELinux module not found. Please verify that it was installed. |
| 82 |
>>> Regenerating /etc/ld.so.cache... |
| 83 |
Traceback (most recent call last): |
| 84 |
File "/tmp/build.py", line 3, in <module> |
| 85 |
import os,portage,sys |
| 86 |
ImportError: No module named 'portage' |
| 87 |
!!! SELinux module not found. Please verify that it was installed. |
| 88 |
Your profile seems to be broken. |
| 89 |
Could not build a list of build packages. |
| 90 |
Double check your /etc/portage/make.profile link and the 'packages' files. |
| 91 |
|
| 92 |
!!! catalyst: run script failed. |
| 93 |
|
| 94 |
|
| 95 |
Traceback (most recent call last): |
| 96 |
File "modules/generic_stage_target.py", line 1253, in run_local |
| 97 |
"run script failed.",env=self.env) |
| 98 |
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd |
| 99 |
raise CatalystError,myexc |
| 100 |
CatalystError |
| 101 |
None |
| 102 |
|
| 103 |
!!! catalyst: Stage build aborting due to error. |
| 104 |
|
| 105 |
Traceback (most recent call last): |
| 106 |
File "/usr/lib64/catalyst/catalyst", line 218, in build_target |
| 107 |
mytarget.run() |
| 108 |
File "modules/generic_stage_target.py", line 1333, in run |
| 109 |
apply(getattr(self,x)) |
| 110 |
File "modules/generic_stage_target.py", line 1258, in run_local |
| 111 |
raise CatalystError,"Stage build aborting due to error." |
| 112 |
CatalystError |
| 113 |
!!! catalyst: Error encountered during run of target stage1 |
| 114 |
Catalyst aborting.... |
| 115 |
lockfile does not exist '/home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20150219/.catalyst_lock' |
| 116 |
|
| 117 |
|
| 118 |
|
| 119 |
Full build log at /home/release/tmp/run/catalyst-auto.A06VIY/log/hardened_stage1-selinux-nomultilib.log |
Archives