[gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - stage2.spec

03 Feb 2020 00:55:06 UTC: NOTICE  : --- Running action sequence: unpack
03 Feb 2020 00:55:06 UTC: NOTICE  : Resume: "seed source" unpack resume point is disabled
03 Feb 2020 00:55:06 UTC: NOTICE  : Resume: Target chroot is invalid, cleaning up...
03 Feb 2020 00:55:06 UTC: NOTICE  : Removing AutoResume Points ...
03 Feb 2020 00:55:06 UTC: NOTICE  : Emptying directory: /release/buildroot/amd64-dev/tmp/default/.autoresume-stage2-amd64-20200202T214503Z
03 Feb 2020 00:55:06 UTC: NOTICE  : Clearing the chroot path ...
03 Feb 2020 00:55:06 UTC: NOTICE  : Emptying directory: /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z
03 Feb 2020 00:55:06 UTC: NOTICE  : Starting rsync from /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20200202T214503Z/
03 Feb 2020 00:55:06 UTC: NOTICE  : to /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z (this may take some time) ..
03 Feb 2020 00:55:09 UTC: NOTICE  : --- Running action sequence: unpack_snapshot
03 Feb 2020 00:55:09 UTC: NOTICE  : --- Running action sequence: setup_confdir
03 Feb 2020 00:55:09 UTC: NOTICE  : --- Running action sequence: portage_overlay
03 Feb 2020 00:55:09 UTC: NOTICE  : --- Running action sequence: base_dirs
03 Feb 2020 00:55:09 UTC: NOTICE  : --- Running action sequence: bind
03 Feb 2020 00:55:09 UTC: NOTICE  : --- Running action sequence: chroot_setup
03 Feb 2020 00:55:09 UTC: NOTICE  : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
03 Feb 2020 00:55:09 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
WARNING:catalyst:Overriding certain env variables may cause catastrophic failure.
03 Feb 2020 00:55:09 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
03 Feb 2020 00:55:09 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables.
03 Feb 2020 00:55:09 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Feb 2020 00:55:09 UTC: WARNING : You have been warned.
WARNING:catalyst:You have been warned.
03 Feb 2020 00:55:09 UTC: NOTICE  : Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/etc/portage/make.conf
03 Feb 2020 00:55:09 UTC: NOTICE  : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
03 Feb 2020 00:55:09 UTC: NOTICE  : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
03 Feb 2020 00:55:09 UTC: NOTICE  : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
Copying stage2-chroot.sh to /tmp
copying stage2-chroot.sh to /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot:
    chroot /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z /tmp/stage2-chroot.sh
>>> Regenerating /etc/ld.so.cache...

Gentoo Linux; http://www.gentoo.org/
Copyright 1999-$ Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
  [[ (0/3) Locating packages ]]
 * Using baselayout : >=sys-apps/baselayout-2
 * Using portage    : portage
 * Using os-headers : >=sys-kernel/linux-headers-4.19
 * Using binutils   : sys-devel/binutils
 * Using gcc        : sys-devel/gcc
 * Using gettext    : gettext
 * Using libc       : virtual/libc
 * Using texinfo    : sys-apps/texinfo
 * Using zlib       : zlib
 * Using ncurses    : ncurses
-------------------------------------------------------------------------------
  [[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
  [[ (2/3) Updating portage ]]

Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)


>>> Running pre-merge checks for sys-apps/portage-2.3.84-r1
 * Determining the location of the kernel source code
 * Unable to find kernel sources at /usr/src/linux
 * Please make sure that /usr/src/linux points at your running kernel, 
 * (or the kernel you wish to build against).
 * Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Checking for suitable kernel configuration options...
 [ ok ]
>>> Emerging binary (1 of 1) sys-apps/portage-2.3.84-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.84-r1::gentoo
 * Messages for package sys-apps/portage-2.3.84-r1:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version


-------------------------------------------------------------------------------
  [[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-9.2.0-r2
>>> Emerging binary (1 of 17) sys-libs/zlib-1.2.11-r2::gentoo
>>> Installing (1 of 17) sys-libs/zlib-1.2.11-r2::gentoo
>>> Emerging binary (2 of 17) sys-apps/baselayout-2.6-r1::gentoo
>>> Installing (2 of 17) sys-apps/baselayout-2.6-r1::gentoo
>>> Emerging binary (3 of 17) sys-kernel/linux-headers-4.19::gentoo
>>> Installing (3 of 17) sys-kernel/linux-headers-4.19::gentoo
>>> Emerging binary (4 of 17) app-portage/elt-patches-20170815::gentoo
>>> Installing (4 of 17) app-portage/elt-patches-20170815::gentoo
>>> Emerging binary (5 of 17) sys-devel/binutils-2.32-r1::gentoo
>>> Installing (5 of 17) sys-devel/binutils-2.32-r1::gentoo
>>> Emerging binary (6 of 17) sys-devel/gettext-0.20.1::gentoo
>>> Installing (6 of 17) sys-devel/gettext-0.20.1::gentoo
>>> Emerging binary (7 of 17) virtual/libc-1::gentoo
>>> Emerging binary (8 of 17) virtual/perl-File-Spec-3.780.0::gentoo
>>> Installing (8 of 17) virtual/perl-File-Spec-3.780.0::gentoo
>>> Emerging (9 of 17) sys-devel/gcc-9.2.0-r2::gentoo
>>> Emerging binary (10 of 17) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Installing (10 of 17) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Emerging binary (11 of 17) virtual/perl-Carp-1.500.0-r1::gentoo
>>> Installing (11 of 17) virtual/perl-Carp-1.500.0-r1::gentoo
>>> Emerging binary (12 of 17) virtual/perl-version-0.992.400::gentoo
>>> Installing (12 of 17) virtual/perl-version-0.992.400::gentoo
>>> Emerging binary (13 of 17) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Installing (13 of 17) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Emerging binary (14 of 17) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Installing (14 of 17) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Emerging binary (15 of 17) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Installing (15 of 17) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Emerging binary (16 of 17) dev-perl/libintl-perl-1.310.0::gentoo
>>> Installing (16 of 17) dev-perl/libintl-perl-1.310.0::gentoo
>>> Emerging binary (17 of 17) sys-apps/texinfo-6.6-r1::gentoo
>>> Installing (17 of 17) sys-apps/texinfo-6.6-r1::gentoo
>>> Failed to emerge sys-devel/gcc-9.2.0-r2
>>> Installing (7 of 17) virtual/libc-1::gentoo
 * Messages for package sys-apps/baselayout-2.6-r1:
 * The following users have non-existent shells!
 * halt - /sbin/halt
 * shutdown - /sbin/shutdown
 * Messages for package sys-devel/gcc-9.2.0-r2:
 * ERROR: sys-devel/gcc-9.2.0-r2::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=sys-devel/gcc-9.2.0-r2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-devel/gcc-9.2.0-r2::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build'
 * S: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-9.2.0'
 * 
 * Please include /var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-build-logs.tar.bz2 in your bug report.
 * 




03 Feb 2020 01:07:42 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
03 Feb 2020 01:07:42 UTC: ERROR   : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
03 Feb 2020 01:07:42 UTC: ERROR   : Exception running action sequence run_local
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
    getattr(self, x)()
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
    print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
    getattr(self, x)()
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
    print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
03 Feb 2020 01:07:42 UTC: NOTICE  : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/var/cache/binpkgs is not a mount point. Skipping
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/run is not a mount point. Skipping
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/dev/shm does not exist. Skipping
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/dev/pts does not exist. Skipping
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/var/tmp/portage is not a mount point. Skipping
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/var/cache/distfiles is not a mount point. Skipping
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/var/db/repos/gentoo is not a mount point. Skipping
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/dev is not a mount point. Skipping
03 Feb 2020 01:07:42 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200202T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
1027.51user 238.12system 12:36.94elapsed 167%CPU (0avgtext+0avgdata 469748maxresident)k
42616inputs+1091312outputs (0major+38651090minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20200202T214503Z.8gQYbG/log/stage2.log