[gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage1-selinux.spec

31 Jan 2018 02:21:30 UTC: NOTICE  : --- Running action sequence: unpack_snapshot
31 Jan 2018 02:21:30 UTC: NOTICE  : --- Running action sequence: setup_confdir
31 Jan 2018 02:21:30 UTC: NOTICE  : --- Running action sequence: portage_overlay
31 Jan 2018 02:21:30 UTC: NOTICE  : --- Running action sequence: base_dirs
31 Jan 2018 02:21:30 UTC: NOTICE  : --- Running action sequence: bind
31 Jan 2018 02:21:30 UTC: NOTICE  : --- Running action sequence: chroot_setup
31 Jan 2018 02:21:30 UTC: NOTICE  : Setting up chroot...
31 Jan 2018 02:21:30 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
31 Jan 2018 02:21:30 UTC: WARNING : If your build fails look here first as the possible problem.
31 Jan 2018 02:21:30 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
31 Jan 2018 02:21:30 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
31 Jan 2018 02:21:30 UTC: WARNING : You have been warned.
31 Jan 2018 02:21:30 UTC: NOTICE  : Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux-20180130T214502Z/etc/portage/make.conf
31 Jan 2018 02:21:30 UTC: NOTICE  : STICKY-CONFIG is enabled
31 Jan 2018 02:21:30 UTC: NOTICE  : --- Running action sequence: setup_environment
31 Jan 2018 02:21:30 UTC: NOTICE  : --- Running action sequence: run_local
copying make.conf to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux-20180130T214502Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux-20180130T214502Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux-20180130T214502Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
    chroot /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux-20180130T214502Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage

Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)


>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.19-r1::gentoo
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
>>> Running pre-merge checks for sys-fs/eudev-3.2.5
 * 
 * As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
 * as described in the URL below:
 * https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * 
 * This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
 * between the default or user-modified choice of sys-fs/udev.  If you wish to disable
 * this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
 * exists: touch /etc/udev/rules.d/80-net-name-slot.rules
 * 
>>> Emerging (1 of 19) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (1 of 19) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging (2 of 19) sys-apps/sandbox-2.12::gentoo
>>> Installing (2 of 19) sys-apps/sandbox-2.12::gentoo
>>> Emerging (3 of 19) virtual/libelf-3::gentoo
>>> Emerging (4 of 19) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (5 of 19) app-admin/eselect-1.4.11::gentoo
>>> Installing (3 of 19) virtual/libelf-3::gentoo
>>> Installing (5 of 19) app-admin/eselect-1.4.11::gentoo
>>> Installing (4 of 19) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (6 of 19) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (6 of 19) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (7 of 19) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (7 of 19) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (8 of 19) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (9 of 19) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Installing (8 of 19) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (10 of 19) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Emerging (11 of 19) sys-devel/gcc-6.4.0-r1::gentoo
>>> Installing (9 of 19) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (12 of 19) virtual/dev-manager-0-r1::gentoo
>>> Emerging (13 of 19) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (10 of 19) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (12 of 19) virtual/dev-manager-0-r1::gentoo
>>> Installing (13 of 19) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (11 of 19) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (14 of 19) sys-apps/kmod-24::gentoo
>>> Emerging (15 of 19) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (16 of 19) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (17 of 19) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (18 of 19) dev-libs/glib-2.52.3::gentoo
>>> Installing (18 of 19) dev-libs/glib-2.52.3::gentoo
>>> Installing (14 of 19) sys-apps/kmod-24::gentoo
>>> Installing (15 of 19) sys-apps/kbd-2.0.4::gentoo
>>> Installing (16 of 19) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (17 of 19) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (19 of 19) sys-fs/eudev-3.2.5::gentoo
>>> Installing (19 of 19) sys-fs/eudev-3.2.5::gentoo
 * Messages for package sys-fs/eudev-3.2.5:
 * 
 * As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
 * as described in the URL below:
 * https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * 
 * This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
 * between the default or user-modified choice of sys-fs/udev.  If you wish to disable
 * this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
 * exists: touch /etc/udev/rules.d/80-net-name-slot.rules
 * 
 * Messages for package sys-apps/busybox-1.28.0:
 * Could not locate user configfile, so we will save a default one
 * Your configuration for sys-apps/busybox-1.28.0 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
 * Messages for package sys-devel/gcc-6.4.0-r1:
 * If you have issues with packages unable to locate libstdc++.la,
 * then try running 'fix_libtool_files.sh' on the old gcc versions.
 * You might want to review the GCC upgrade guide when moving between
 * major versions (like 4.2 to 4.3):
 * https://wiki.gentoo.org/wiki/Upgrading_GCC
 * Messages for package dev-libs/glib-2.52.3:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-fs/eudev-3.2.5:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * 
 * You need to restart eudev as soon as possible to make the
 * upgrade go into effect:
 * 	/etc/init.d/udev --nodeps restart
 * 
 * For more information on eudev on Gentoo, writing udev rules, and
 * fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev










emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
 * Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
 * Initializing /tmp/stage1root/lib as a symlink
 * Initializing /tmp/stage1root/usr/lib as a symlink
 * Initializing /tmp/stage1root/usr/local/lib as a symlink
 * You should reboot now to get /run mounted with tmpfs!


emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar virtual/pkgconfig sys-apps/file app-arch/gzip sys-apps/net-tools sys-apps/diffutils sys-devel/gettext sys-apps/findutils sys-apps/sed virtual/os-headers virtual/package-manager sys-devel/bison virtual/editor sys-apps/makedev net-misc/wget sys-apps/gawk sys-apps/baselayout sys-devel/gnuconfig sys-devel/gcc sys-devel/binutils sys-devel/automake sys-apps/which sys-devel/patch sys-apps/coreutils net-misc/rsync app-arch/xz-utils sys-devel/libtool app-shells/bash:0 sys-apps/grep sys-devel/make sys-devel/autoconf virtual/shadow app-arch/bzip2 sys-apps/less sys-devel/flex virtual/libc 

The following USE changes are necessary to proceed:
 (see "package.use" in the portage(5) man page for more details)
# required by virtual/pkgconfig-0-r1::gentoo
# required by sys-apps/portage-2.3.19-r1::gentoo
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
>=dev-util/pkgconf-1.3.7 pkg-config

Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.

!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" ABI_X86="(64)" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"

  The following REQUIRED_USE flag constraints are unsatisfied:
    exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )

  The above constraints are a subset of the following complete expression:
    exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )

(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/automake-1.15.1-r1::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
31 Jan 2018 03:28:08 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
31 Jan 2018 03:28:08 UTC: ERROR   : CatalystError: Stage build aborting due to error.
31 Jan 2018 03:28:08 UTC: ERROR   : Exception running action sequence run_local
Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
    env=self.env)
  File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
    getattr(self, x)()
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
    print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
31 Jan 2018 03:28:08 UTC: NOTICE  : Cleaning up... Running unbind()
Command exited with non-zero status 2
9998.93user 1872.22system 1:06:46elapsed 296%CPU (0avgtext+0avgdata 3679120maxresident)k
27464inputs+16418040outputs (2major+302432543minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20180130T214502Z.8apazU/log/hardened_stage1-selinux.log