[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - installcd-stage1.spec

checking gui/bitmap.h usability... no
checking gui/bitmap.h presence... no
checking for gui/bitmap.h... no
checking util/locker.h usability... no
checking util/locker.h presence... no
checking for util/locker.h... no
checking util/application.h usability... no
checking util/application.h presence... no
checking for util/application.h... no
checking for libpng >= 1.0.0... yes
checking LIBPNG_CFLAGS... -I/usr/include/libpng16 
checking LIBPNG_LIBS... -lpng16 
checking png.h usability... yes
checking png.h presence... yes
checking for png.h... yes
checking libpng/png.h usability... no
checking libpng/png.h presence... no
checking for libpng/png.h... no
checking for png_create_info_struct... yes
checking for png_set_rgb_to_gray... yes
checking for png_get_libpng_ver... yes
checking for png_get_image_width... yes
checking for png_get_image_height... yes
checking for png_get_gAMA... yes
checking for png_get_color_type... yes
checking for png_get_bit_depth... yes
checking for png_set_strip_alpha... yes
checking for png_get_valid... yes
checking for png_get_sRGB... yes
checking if you can include both setjmp.h and png.h... yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking for jpeg_destroy_decompress in -ljpeg... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
---------------------------------------------------------
Configuration results:

IPv6:			YES
Supported compression:	ZLIB BZIP2
SSL support:		OPENSSL
UTF-8 terminal:		YES
GPM support:		YES
Graphics enabled:	YES
Graphics drivers:	FB
Image formats:		GIF PNG XBM JPEG
---------------------------------------------------------
Makefile:465: *** missing separator.  Stop.
 * ERROR: www-client/links-2.8-r1::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=www-client/links-2.8-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=www-client/links-2.8-r1::gentoo'`.
 * The complete build log is located at '/var/log/portage/www-client:links-2.8-r1:20140908-052812.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/www-client/links-2.8-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/www-client/links-2.8-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/www-client/links-2.8-r1/work/links-2.8'
 * S: '/var/tmp/portage/www-client/links-2.8-r1/work/links-2.8'

 * Messages for package sys-libs/timezone-data-2014f:

 * You do not have TIMEZONE set in /etc/timezone.
 * Skipping auto-update of /etc/localtime.

 * Messages for package net-misc/vconfig-1.9:

 * MTU problems exist for many ethernet drivers.
 * Reduce the MTU on the interface to 1496 to work around them.

 * Messages for package sys-apps/keyutils-1.5.9-r1:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package net-fs/cifs-utils-6.1-r1:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * setuid use flag was dropped due to multiple security implications
 * such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
 * You are free to set setuid flags by yourself

 * Messages for package net-dialup/ppp-2.4.7:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.7/scripts directory.

 * Messages for package app-misc/screen-4.0.3-r6:

 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.

 * Messages for package net-dialup/rp-pppoe-3.8-r2:

 * Use pppoe-setup to configure your dialup connection.

 * Messages for package sys-apps/busybox-1.21.0:

 * Could not locate user configfile, so we will save a default one
 * You cannot have USE='static pam'.  Assuming static is more important.
 * Your configuration for sys-apps/busybox-1.21.0 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.21.0 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]

 * Messages for package sys-fs/fuse-2.9.3:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package app-accessibility/brltty-4.5-r3:

 * 
 * please be sure /etc/brltty.conf is correct for your system.
 * 
 * To make brltty start on boot, type this command as root:
 * 
 * rc-update add brltty boot

 * Messages for package app-admin/hddtemp-0.3_beta15-r7:

 * In order to update your hddtemp database, run:
 * emerge --config =app-admin/hddtemp-0.3_beta15-r7
 * 
 * If your hard drive is not recognized by hddtemp, please consider
 * submitting your HDD info for inclusion into the Gentoo hddtemp
 * database by filing a bug at https://bugs.gentoo.org/
 * 
 * If hddtemp complains but finds your HDD temperature sensor, use the
 * --quiet option to suppress the warning.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/hddtemp-0.3_beta15-r7/README.gentoo*
 * for future reference)

 * Messages for package sys-power/acpid-2.0.20:

 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * http://www.gentoo.org/doc/en/power-management-guide.xml
 * 

 * Messages for package net-misc/ntp-4.2.6_p5-r10:

 * You can find an example /etc/ntp.conf in /usr/share/ntp/
 * Review /etc/ntp.conf to setup server info.
 * Review /etc/conf.d/ntpd to setup init.d info.
 * The way ntp sets and maintains your system time has changed.
 * Now you can use /etc/init.d/ntp-client to set your time at
 * boot while you can use /etc/init.d/ntpd to maintain your time
 * while your machine runs

 * Messages for package www-client/links-2.8-r1:

 * ERROR: www-client/links-2.8-r1::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=www-client/links-2.8-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=www-client/links-2.8-r1::gentoo'`.
 * The complete build log is located at '/var/log/portage/www-client:links-2.8-r1:20140908-052812.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/www-client/links-2.8-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/www-client/links-2.8-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/www-client/links-2.8-r1/work/links-2.8'
 * S: '/var/tmp/portage/www-client/links-2.8-r1/work/links-2.8'

!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1403, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/amd64-dev/tmp/default/livecd-stage1-amd64-20140908/.catalyst_lock'



Full build log at /home/release/tmp/run/catalyst-auto.4750/log/installcd-stage1.log